Nitrogen addition changed soil fungal community structure and increased the biomass of functional fungi in Korean pine plantations in temperate northeast China.

Nitrogen (N) deposition is a global environmental issue that can have significant impacts on the community structure and function in ecosystems. Fungi play a key role in soil biogeochemical cycles and their community structures are tightly linked to the health and productivity of forest ecosystems. Based on high-throughput sequencing and ergosterol extraction, we examined the changes in community structure, composition, and biomass of soil ectomycorrhizal (ECM) and saprophytic (SAP) fungi in 0-10 cm soil layer after 8 years of continuous N addition and their driving factors in a temperate Korean pine plantation in northeast China. Our results showed that N addition increased fungal community richness, with the highest richness and Chao1 index under the low N treatment (LN: 20 kg N ha-1 yr-1). Based on the FUN Guild database, we found that the relative abundance of ECM and SAP fungi increased first and then decreased with increasing N deposition concentration. The molecular ecological network analysis showed that the interaction between ECM and SAP fungi was enhanced by N addition, and the interaction was mainly positive in the ECM fungal network. N addition increased fungal biomass, and the total fungal biomass (TFB) was the highest under the MN treatment (6.05 ± 0.3 mg g-1). Overall, we concluded that N addition changed soil biochemical parameters, increased fungal activity, and enhanced functional fungal interactions in the Korean pine plantation over an 8-year simulated N addition. We need to consider the effects of complex soil conditions on soil fungi and emphasize the importance of regulating soil fungal community structure and biomass for managing forest ecosystems. These findings could deepen our understanding of the effects of increased N deposition on soil fungi in temperate forests in northern China, which can provide the theoretical basis for reducing the effects of increased N deposition on forest soil.

Coinoculation of arbuscular mycorrhizal fungi and rhizobia stimulates atrazine dissipation by changing the atrazine-degrading bacterial community at the soil aggregate scale.

As a potential low-cost and environmentally friendly strategy, bioremediation of herbicide polluted soil has attracted increasing attention. However, there is a lack of knowledge regarding the response of the atrazine-degrading bacterial community to coinoculation of arbuscular mycorrhizal (AM) fungi and rhizobia for atrazine dissipation. In this study, a pot experiment was conducted with AM fungi Glomus mosseae (AM), rhizobia Rhizobium trifolii TA-1 (R) and their coinoculation (AMR) with atrazine. In each treatment, the atrazine-degrading bacterial community of four soil size aggregates, namely large macroaggregates (LMa), small macroaggregates (SMa), microaggregates (Mia) and primary particles (P) were investigated. The results showed that the atrazine residue concentration was lowest in AMR, and that in LMa was also significantly lower than that in the other smaller aggregate sizes. Overall, inoculation, the aggregate fraction and their interaction had significant effects on soil TN, SOC, AP and pH. For the atrazine-degrading bacterial community, the Chao1 index increased with decreasing particle size, but the Shannon index decreased. Moreover, the abundances of the dominant atrazine-degrading bacterial genera Arthrobacter, Bacillus, Marmoricola and Nocardioides in the Mia and P particle size groups were greater than those in the LMa and SMa groups in each treatment. The bacterial communities in the Mia and P particle sizes in each treatment group were more complex. Therefore, coinoculation of AM fungi and rhizobia stimulated atrazine dissipation by changing the atrazine-degrading bacterial community, and the response of the atrazine-degrading bacterial community to each aggregate size varied depending on its distinct soil physicochemical properties.

A lanthanide luminescent sensor for the detection of 4-nitrophenol in aqueous media.

The development of facile luminescent sensors for detecting nitrophenols in aqueous media is of great necessity for the safety of the environment and human health, as they are a class of widespread toxic organic pollutants that cause serious adverse effects upon consumption. Based on a new multidentate asymmetric ligand (H2L) in which salicylamide and 4-nitryl-salicylaldimine are spaced by 1,2-bis(2-ethoxy)ethyl, a new hydrostable lanthanide intercycle, [Tb2L2(NO3)2]·CH3CN (Tb-[2]c), was prepared to act as a new luminescent sensor for 4-NP in water media. Structural analysis indicated that two fully deprotonated L2- ligands in cis-configuration and µ2-L-κ2O1:κO2:κO4:κN2:κO5 coordination mode were interlocked by two TbIII ions to render the emitted TbIII encapsulated by L2- for lessening non-radiative transitions. The excellent sensitizing capability of the ligand L2- to TbIII was ascertained by both experimental methods and theoretical calculations. The sensing exploration indicated that Tb-[2]c exhibited highly sensitive and selective recognition of 4-NP against other nitroaromatics in aqueous media. The recognition mechanism could be attributed to the internal filtration effect (IFE) mechanism when DFT calculations and accumulating experimental evidence were combined.

Core-Shell Droplet-Based Microfluidic Screening System for Filamentous Fungi.

Filamentous fungi are competitive hosts for the production of drugs, proteins, and chemicals. However, their utility is limited by screening methods and low throughput. In this work, a universal high-throughput system for optimizing protein production in filamentous fungi was described. Droplet microfluidics was used to encapsulate large mutant strain pools in biocompatible core-shell microdroplets designed to avoid mycelial punctures and thus sustain prolonged culture. The self-assembled split GFP was then used to characterize the secretory capacity of the strains and isolate strains with superior production titers according to the fluorescence signals. The platform was applied to optimize the α-amylase secretion of Aspergillus niger, resulting in the isolation of a strain with 2.02-fold higher secretion capacity. The system allows the analysis of >105 single cells per h and will facilitate ultrahigh-throughput screening experiments of filamentous fungi. This method could help identify improved hosts for the large-scale production of biotechnology-relevant proteins. This is a broadly applicable system that can be equally used in other hosts.

Characterization of an Enterococcus faecalis bacteriophage SFQ1 as a potential therapeutic agent.

Enterococcus faecalis is a well-established resident of the human gastrointestinal tract and is also a major cause of human infections. Unfortunately, therapeutic options for E. faecalis infections remain limited, particularly with the emergence of vancomycin-resistant strains in hospital settings. Consequently, there has been a renewed interest in phage therapy as an alternative to antibiotics. In this study, we have isolated a bacteriophage, vB_EfaS-SFQ1, from hospital sewage, which effectively infects E. faecalis strain EFS01. Phage SFQ1 is a siphovirus and exhibits a relatively broad host range. Furthermore, it has a short latent period of approximately 10 min and a large burst size of about 110 PFU/cell at a multiplicity of infection (MOI) of 0.01, and it could effectively disrupt the biofilms formed by E. faecalis. Thus, this study provides a detailed characterization of E. faecalis phage SFQ1, which has great potential for treating E. faecalis infections.

Efficacy analysis of axillary approach in the treatment of Ideberg type I and II scapular glenoid fractures: Case series.

RATIONALE: To investigate the clinical efficacy of the axillary approach in the surgical treatment of Ideberg type I and II scapular glenoid fractures. PATIENT CONCERNS AND DIAGNOSIS: Retrospective analysis of 13 cases of scapular glenoid fracture treated in the affiliated Hospital of Jining Medical College, Jiaxiang County People hospital, Zoucheng City people Hospital, Yanzhou District People Hospital, and Juancheng County people Hospital from December 2020 to January 2022. Eight males (including 1 bilateral) and 5 females, with an average age of 57.5 years (range from 33 to 75 years). According to Ideberg classification, there were 10 cases of type I a, 1 case of type I a combined with type I b, and 2 cases of type II. All patients were treated with axillary approach surgery and 7 patients with combined anterior shoulder dislocation were treated by first-stage manipulation and second-stage reoperation. Seven patients were fixed with a wire anchor, 3 patients with type I a were fixed with a "T" plate, and 5 patients were complicated with rotator cuff tear and were repaired with a wire anchor. At the last follow-up, the Constant-Murley shoulder function score, visual analog score, DASH score, and Hawkins grade were used to evaluate shoulder function, pain, and stability after treatment. INTERVENTION: The intervention was to treat patients with Ideberg type I and II scaphoid fractures using an axillary approach. OUTCOMES: All 13 patients in this group were followed up thoroughly, and the follow-up time was 12 to 25 months, with an average of 18.6 months. The operation time was 65 to 135 minutes, with an average of 85.6 minutes. Intraoperative blood loss ranged from 20 to 120 mL, averaging 55.6 mL. The duration of hospitalization ranged from 7 to 22 days, with an average of 9.6 days. The surgical incisions of all patients were grade-A healing. Bone healing of glenoid fractures was observed 3 months after the operation. LESSONS: The axillary approach for Ideberg type I and II scapular glenoid fractures is a feasible surgical approach with complete access through the muscle gap, minimal surgical trauma, mild postoperative pain, and satisfactory clinical results.

Performance of atrazine adsorption behavior and microbial community structure in Mollisol aggregate fraction.

Owing to complex pore systems and chemical substances, soil aggregates provide a spatially heterogeneous microenvironment for adsorption capacity and microbial survival. As the widely used pesticide in farmlands, atrazine environmental behavior is not well known at the aggregate scale. In this study, Mollisol soil samples were sieved into four aggregate-size classes: large macroaggregates (>2 mm, LMa), small macroaggregates (1-2 mm, SMa), microaggregates (0.25-1 mm, Mia) and primary particles (<0.25 mm, P). The pore characteristics of each aggregate fraction was visualized by non-invasive X-ray three-dimensional microscopic computed tomography (3D-CT) combined with pore network extraction. The adsorption kinetics of atrazine in each aggregate-size fraction can be described well by a pseudo-second-order kinetic model. The adsorption isothermal process of atrazine can be better fitted by the Langmuir isotherm model than Freundlich isotherm model. There was an obvious linear correlation between the maximum atrazine adsorption capacity and aggregate SOC content as well as TN. In addition, the abundance of bacteria, actinomycetes and anaerobic bacteria in P was totally higher than those in SMa and Mia. Although pH is strongly linked to the bacterial community in the aggregate fraction, aggregate particle size explained 18 % for shaping the microbial community. Therefore, chemical properties and pore characteristics of each soil aggregate fraction both contributed to performance of atrazine adsorption behavior and microbial community.

Cocultivation with Solanum nigrum and inoculation with Rhizophagus intraradices can improve plant photosynthesis and antioxidant defense to alleviate cadmium toxicity to soybean.

High Cd pollution can damage plant physiology and seriously threaten ecological security and human health. Therefore, we designed a cropping system, arbuscular mycorrhizal fungi (AMF) - soybean - Solanum nigrum L., to solve the high Cd pollution problem in an environmentally and economically friendly way. The results showed that AMF were able to break free from the constraints of cocultivation and still promote plant photosynthesis and growth in combined treatments to resist Cd stress. In addition, cocultivation combined with AMF improved the antioxidant defense to scavenge reactive oxygen species by promoting the production of antioxidant enzymes and nonenzyme substances in host plants. The glutathione content in soybean and the catalase activity in nightshade were recorded at the highest values under cocultivation combined with AMF treatment, which were 23.68% and 129.12% higher than those of monoculture without AMF treatments. The improvement in antioxidant defense alleviated oxidative stress, which was manifested by the reduction in Cd dense electronic particles in the ultrastructure and a 26.38% decrease in MDA content. Furthermore, this cropping mode combined the advantages of cocultivation to improve the Cd extraction efficiency and Rhizophagus intraradices to limit Cd accumulation and transport so that Cd was more accumulated and restricted in the roots of the cocultivated Solanum nigrum L., and the Cd concentration in soybean beans was reduced by 56% compared with the soybean monoculture without AMF treatment. Therefore, we suggest that this cropping system is a comprehensive and mild remediation technology suitable for highly Cd-contaminated soil.

Effects of AMF Compound Inoculants on Growth, Ion Homeostasis, and Salt Tolerance-Related Gene Expression in Oryza sativa L. Under Salt Treatments.

Increased soil salinization is among the main factors that limits safe rice production. Arbuscular mycorrhizal fungi (AMF) have been shown to alleviate the toxic effects of salt stress in plants. However, more studies on AMF combined with other functional microorganisms are needed to further improve salt tolerance in rice. Therefore, the compound inoculum Funneliformis mosseae (Fm) together with two functional microorganisms, Piriformospora indica (Pi) and Agrobacterium rhizogenes (Ar) was evaluated for their effect on the rice growth, photosynthetic gas exchange parameters, ion homeostasis, and the expression of salt tolerance-related genes under 0, 80, 120 and 160 mM salt stress conditions. The results showed that: (1) the rice seedling biomass of the AMF compound inoculant treatment group was significantly higher than that of the non-inoculation treatment group (P < 0.05); (2) under NaCl stress, inoculation with AMF compound inoculants can activate the rice antioxidant enzyme system and improve osmoregulation ability; (3) AMF compound inoculants can increase the concentration of K+ in the plant and inhibit the transfer of Na+ to rice leaves, maintaining a high K+/Na+; and (4) AMF compound inoculants could induce and regulate the overexpression of genes related to salt tolerance, photosynthesis and ion homeostasis in rice, and improve the tolerance of rice under salt stress. Our study showed that AMF compound inoculants could improve the adaptability of rice under NaCl stress and promote plant growth by regulating the photosynthetic gas exchange parameter, reactive oxygen species (ROS) scavenging ability, and ion homeostasis of plants. These results suggest that AMF compound inoculants may play an important role in improving rice productivity in salinized soil.

Arbuscular mycorrhizal fungi influence the uptake of cadmium in industrial hemp (Cannabis sativa L.).

Phytoremediation is currently a more environmentally friendly and economical measure for the remediation of cadmium (Cd) contaminated soil. Heavy metal-resistant plant species, Cannabis sativa L. was inoculated with Rhizophagus irregularis to investigate the mechanisms of mycorrhizal in improving the Cd remediation ability of C. sativa. The results showed that after inoculation with R. irregularis, C. sativa root Cd contents increased significantly, and leaf Cd enrichment decreased significantly. At the transcriptional level, R. irregularis down-regulated the expression of the ABC transporter family but up-regulated differentially expressed genes regulating low molecular weight organic acids. The levels of malic acid, citric acid, and lactic acid were significantly increased in the rhizosphere soil, and they were significantly and strongly related to oxidizable Cd concentrations. Then citric acid levels were considerably and positively connected to exchangeable Cd concentrations. Our findings revealed that through regulating the movement of root molecules, arbuscular mycorrhizal fungus enhanced the heavy metal tolerance of C. sativa even more, meanwhile, they changed the Cd chemical forms by altering the composition of low molecular weight organic acids, which in turn affected soil Cd bioavailability.

Systematic engineering of Escherichia coli for efficient production of nicotinamide riboside from nicotinamide and 3-cyanopyridine.

Nicotinamide riboside (NR), a key biosynthetic precursor of NAD+, is receiving increasing attention because of its role. In this study, a whole-cell catalysis method to efficiently synthesize NR was established. First, the performance of 5'-nucleotidase (UshA) from Escherichia coli was confirmed to have high catalytic activity to synthesize NR. Then, the endogenous NR degradation pathway was detected, and the genes (rihA, rihB, and rihC) involved in NR degradation were knocked out, which enabled NR biosynthesis. In addition, the important role of the signal peptide of UshA in NR transport had been confirmed. Subsequently, nitrile hydratase was introduced to achieve the conversion of 3-cyanopyridine to NR. Finally, the NR titer reached 25.6 and 29.8 g/L with nicotinamide and 3-cyanopyridine, respectively, as substrates in a 5-L bioreactor, the efficient biosynthesis of NR in E. coli by using nicotinamide and 3-cyanopyridine.

Responses of Bacterial Community Structure, Diversity, and Chemical Properties in the Rhizosphere Soil on Fruiting-Body Formation of Suillus luteus.

Mycorrhiza helper bacteria (MHB) play an important role in driving mycorrhizal formation. There are few reports on the relationship between bacteria and fruiting growths. Taking mycorrhizal rhizosphere soil from sporocarps of the S. luteus and non-mycorrhizal rhizosphere soil of the host plant (Larix gmelinii), we measured the bacterial community structure and diversity and chemical properties to clarify the effect of bacteria on fruiting-body formation. The bacterial diversity was significantly higher in mycorrhizal rhizosphere soil (p < 0.05) than that in non-mycorrhizal rhizosphere soil. The relative abundance of Burkholderia, Bradyrhizobium, Pseudomonas, and Rhizobium was significantly higher (p < 0.05) in mycorrhizal rhizosphere soil than in non-mycorrhizal rhizosphere soil. The soil organic matter (SOM), total nitrogen (TN), total phosphorus (TP), total potassium (TK), ammonium nitrogen (AN), available phosphorus (AP), available potassium (AK), and the activity of catalase, urease, and phosphatase in mycorrhizal rhizosphere soil were significantly higher (p < 0.05) than those in non-mycorrhizal rhizosphere soil. A redundancy analysis (RDA) showed that dominant bacteria are closely related to soil enzyme activity and physicochemical properties (p < 0.05). The boletus recruits a large number of bacteria around the plant roots that speed up nutrient transformation and increase the soil nutrient content, providing an important guarantee for mycelium culture and fruiting-body formation. These findings provide ideas for the nutritional supply of boletus sporocarps and lay the theoretical foundation for the efficient artificial cultivation of boletus.

Rhizophagus irregularis enhances tolerance to cadmium stress by altering host plant hemp (Cannabis sativa L.) photosynthetic properties.

Arbuscular mycorrhizal fungi (AMF) are widespread and specialized soil symbiotic fungi, and the establishment of their symbiotic system is of great importance for adversity adaptation. To reveal the growth and photosynthetic characteristics of AMF-crop symbionts in response to heavy metal stress, this experiment investigated the effects of Rhizophagus irregularis (Ri) inoculation on the growth, photosynthetic gas exchange parameters, and chlorophyll fluorescence characteristics of hemp (Cannabis sativa L.) at a Cd concentration of 80 mg/kg. The results showed that (1) under Cd stress, the biomass of each plant structure in the Ri treatment was significantly higher than that in the noninoculation treatment (P < 0.05); (2) under Cd stress, the transpiration rate, stomatal conductance, net photosynthetic rate, PSII efficiency, apparent electron transport rate and photochemical quenching coefficient of the Ri inoculation group reached a maximum, with increases ranging from 1% to 28%; (3) inoculation of Ri significantly reduced Cd enrichment in leaves, which in turn significantly increased the transpiration rate, stomatal conductance, electron transfer rate, net photosynthetic rate and photosynthetic intensity, protecting PSII (P < 0.05); and (4) by measuring the light response curves of different treatments, the light saturation points of hemp inoculated with the Ri treatment reached 1448.4 µmol/m2/s, and the optical compensation point reached 24.0 µmol/m2/s under Cd stress. The Ri-hemp symbiont demonstrated high adaptability to weak light and high utilization efficiency of strong light under Cd stress. Our study showed that Ri-hemp symbiosis improves adaptation to Cd stress and promotes plant growth by regulating the photosynthetic gas exchange parameters and chlorophyll fluorescence parameters of plants. The Ri-hemp symbiosis is a promising technology for improving the productivity of Cd-contaminated soil.

Enterococcus faecalis Bacteriophage vB_EfaS_efap05-1 Targets the Surface Polysaccharide and ComEA Protein as the Receptors.

Enterococcus faecalis is a Gram-positive opportunistic pathogen that causes nosocomial infections in humans. Due to the growing threat of antibiotic resistance of E. faecalis, bacteriophage therapy is a promising option for treating of E. faecalis infection. Here, we characterized a lytic E. faecalis bacteriophage vB_EfaS_efap05-1 with a dsDNA genome of 56,563 bp. Phage vB_EfaS_efap05-1 had a prolate head and a tail, and belongs to Saphexavirus which is a member of Siphoviridae. Efap05-1 uses either surface polysaccharide or membrane protein ComEA as the receptor because the mutation of both genes (ComEA and UDP-glucose 4-epimerase galE) prevents phage adsorption and leads to phage resistance, and complementation of ComEA or galE could recover its phage sensitivity. Our results provided a comprehensive analysis of a new E. faecalis phage and suggest efap05-1 as a potential antimicrobial agent.

Potential Genes Associated with COVID-19 and Comorbidity.

Hypertension, diabetes mellitus, and coronary artery disease are common comorbidities and dangerous factors for infection and serious COVID-19. Polymorphisms in genes associated with comorbidities may help observe susceptibility and disease severity variation. However, specific genetic factors and the extent to which they can explain variation in susceptibility of severity are unclear. Therefore, we evaluated candidate genes associated with COVID-19 and hypertension, diabetes mellitus, and coronary artery disease. In particular, we performed searches against OMIM, NCBI, and other databases, protein-protein interaction network construction, and GO and KEGG pathway enrichment analyses. Results showed that the associated overlapping genes were TLR4, NLRP3, MBL2, IL6, IL1RN, IL1B, CX3CR1, CCR5, AGT, ACE, and F2. GO and KEGG analyses yielded 302 GO terms (q < 0.05) and 29 signaling pathways (q < 0.05), respectively, mainly including coronavirus disease-COVID-19 and cytokine-cytokine receptor interaction. IL6 and AGT were central in the PPI, with 8 and 5 connections, respectively. In this study, we identified 11 genes associated with both COVID-19 and three comorbidities that may contribute to infection and disease severity. The key genes IL6 and AGT are involved in regulating immune response, cytokine activity, and viral infection. Therefore, RAAS inhibitors, AGT antisense nucleotides, cytokine inhibitors, vitamin D, fenofibrate, and vaccines regulating non-immune and immune factors could be potential strategies to prevent and cure COVID-19. The study provides a basis for further investigation of genes and pathways with predictive value for the risk of infection and prognosis and could help guide drug and vaccine development to improve treatment efficacy and the development of personalised treatments, especially for COVID-19 individuals with common comorbidities.

Label-free quantitative proteomics of arbuscular mycorrhizal Elaeagnus angustifolia seedlings provides insights into salt-stress tolerance mechanisms.

Introduction: Soil salinization has become one of the most serious environmental issues globally. Excessive accumulation of soluble salts will adversely affect the survival, growth, and reproduction of plants. Elaeagnus angustifolia L., commonly known as oleaster or Russian olive, has the characteristics of tolerance to drought and salt. Arbuscular mycorrhizal (AM) fungi are considered to be bio-ameliorator of saline soils that can enhance the salt tolerance of the host plants. However, there is little information on the root proteomics of AM plants under salt stress. Methods: In this study, a label-free quantitative proteomics method was employed to identify the differentially abundant proteins in AM E. angustifolia seedlings under salt stress. Results: The results showed that a total of 170 proteins were significantly differentially regulated in E.angustifolia seedlings after AMF inoculation under salt stress. Mycorrhizal symbiosis helps the host plant E. angustifolia to respond positively to salt stress and enhances its salt tolerance by regulating the activities of some key proteins related to amino acid metabolism, lipid metabolism, and glutathione metabolism in root tissues. Conclusion: Aspartate aminotransferase, dehydratase-enolase-phosphatase 1 (DEP1), phospholipases D, diacylglycerol kinase, glycerol-3-phosphate O-acyltransferases, and gamma-glutamyl transpeptidases may play important roles in mitigating the detrimental effect of salt stress on mycorrhizal E. angustifolia . In conclusion, these findings provide new insights into the salt-stress tolerance mechanisms of AM E. angustifolia seedlings and also clarify the role of AM fungi in the molecular regulation network of E. angustifolia under salt stress.

Anion-Dependent Structure and Luminescence Diversity in ZnII-LnIII Heterometallic Architectures Supported by a Salicylamide-Imine Ligand.

To advance the structural development and fully explore the application potential, it is highly desirable but challenging to elucidate the relationship between the structures and properties of ZnII-LnIII heterometallic species. Herein, three types of ZnII-LnIII heterometallic compounds (LnIII = GdIII, TbIII) formulated as [Zn16Ln4L12(µ3-O)4(NO3)12]·8CH3CN (ZnLn-1), [Zn2Ln2L2(NO3)6(H2O)2]·3CH3CN (ZnLn-2), and [Zn4Ln2L8(OAc)12]·xCH3CN (ZnLn-3: for Ln = Gd, x = 5; for Ln = Tb, x = 4) were dictated by common inorganic anions, NO3- and OAc-, with the aid of the multidentate ligand H2L with propane as the central skeleton and 3-methoxysalicylamide and 3-methoxysalicylaldimine as terminal groups. ZnLn-1 features cubic cages with four {Zn4L3} tetrahedral subunits and four Ln3+ centers positioned at the eight vertices alternately when NO3- was introduced into the reaction system exclusively. An attempt to replace NO3- in ZnLn-1 with OAc- partially led to the formation of {Zn2Ln2L2} heterometallic wheels. Meanwhile, ZnLn-3 featuring double-hairpin-like {Zn4Ln2L4} hemicycles that are orthogonal to each other assisted by intermolecular hydrogen bonds was constructed when NO3- in ZnLn-1 was completely replaced by OAc-. Their structural integrity in solution were ascertained by both emission and 1H NMR spectroscopy. Ascribed to the different Zn2+-containing antenna, ZnTb-2 possesses a relatively strong emission characteristic of Tb3+; ZnTb-1 has moderate Tb3+ luminescence, yet an absence of Tb3+ emission is found in ZnTb-3. Such an emission difference could be mainly attributed to the antenna effect directed by distinct structural characteristics induced by anions. The anion-dictated self-assembly strategy presented herein not only offers a facile approach to regulate the coordination mode of H2L to such an extent to obtain diverse structures of ZnII-LnIII heterometallic species but also provides an understanding of how common inorganic anions tune coordination-driven self-assemblies as well as the subsequent luminescence properties.

A hydrostable Zn2+ coordination polymer for multifunctional detection of inorganic and organic contaminants in water.

From the perspective of human health and environmental safety, the development of hydrostable fluorescent sensors for the detection of heavy metal ions and nitroaromatics is an important but a challenging issue. To this end, a water-stable Zn2+ coordination polymer formulated as {[Zn(H2L)]·2DMF·3H2O}n (ZnCP) was prepared elaborately by a solvothermal method using a multidentate ligand (H4L) with 2,6-pyridine-dicarboxylic acid spaced by para-substituted benzene. Single-crystal analysis shows that the new ZnCP exhibits one-dimensional chain structural features, which further promoted to afford a wrinkled two-dimensional network structure via inter-chain hydrogen bonding. Powder X-ray diffraction and fluorescence measurements show that it can maintain crystallinity and structural integrity under harsh acidic and alkaline conditions with the pH ranging from 4 to 11. Notably, the bright blue-emissive ZnCP showed selective fluorescence quenching effects for Fe3+ and picric acid (PA), which makes it an excellent chemical sensor for Fe3+ and picric acid (PA) with low detection limits of 0.41 and 0.26 µM in water. The recognition mechanism of Fe3+ could be attributed to UV absorption competition and resonance energy transfer in the aid of weak electrostatic interactions, while the recognition mechanism of PA is considered to be a multi-quenching mechanism dominated by absorption competition and PET effects with the assistance of hydrogen bonding. In addition, poly(methyl methacrylate) (PMMA) films doped with ZnCP (ZnCP@PMMA) were developed to provide better sensing performance and portability for practical applications.

[Research on the classification criteria of femoral intertrochanteric fractures based on irreducibility or not].

OBJECTIVE: To formulate the classification criteria of femoral intertrochanteric fractures based on irreducibility or not in order to predict the difficulty of fracture recovery. METHODS: A clinical data of 244 patients with closed femoral intertrochanteric fractures admitted between January 2017 and March 2020 was retrospectively analyzed. There were 116 males and 128 females with an average age of 77.9 years (range, 45-100 years). The cause of injury included falling in 190 cases, traffic accident in 36 cases, smashing in 13 cases, and falling from height in 5 cases. The time from injury to operation was 1-14 days (mean, 3.6 days). According toAO/Orthopaedic Trauma Association (AO/OTA) classification, the fractures were classified as type 31-A1 in 38 cases, type 31-A2 in 160 cases, and type 31-A3 in 46 cases. According to whether the recovery difficulty occurred after intraoperative closed traction reset, the patients were divided into reducible-group and irreducible-group; combined with the literature and preoperative imaging data of two groups, the classification criteria of femoral intertrochanteric fractures was formulated based on the irreducibility or not. The 244 fractures were classified by the doctors who did not attend the operation according to the classification criteria, predicted the difficulty of fracture reduction, and compared with the actual intraoperative reduction situation. RESULTS: The 244 patients were divided into reducible-group ( n=164, 67.21%) and irreducible-group ( n=80, 32.79%) according to the intraoperative difficulty of reduction. Comparing the imaging data and characteristics of the two groups, and formulating the classification criteria of femoral intertrochanteric fractures based on irreducibility or not, the fractures were mainly divided into two categories of irreducibility and reducibility. The fractures of irreducibility category was divided into typesⅠ-Ⅴ, among which type Ⅲ was divided into subtypes 1-4; the fractures of reducibility category was divided into typesⅠand Ⅱ. Compared with the actual intraoperative evaluation results, the total accuracy rate of the doctors who did not attend the operation was 81.15% (198/244) based on the classification criteria of femoral intertrochanteric fractures. The accuracy rate of irreducibility category was 65.74% (71/108), and the reducibility category was 93.38% (127/136). All patients were followed up 13-25 months, with an average of 17.6 months. All fractures healed except 2 cases died of infection. CONCLUSION: The classification criteria of femoral intertrochanteric fractures based on irreducibility or not can accurately predict the reducible cases preoperatively, and most of the irreducible cases can be correctly predicted in a wider way. But the classification criteria still need to be further improved and supplemented.

[Advances in metabolic engineering for the production of aromatic chemicals].

Metabolic engineering has been developed for nearly 30 years since the early 1990s, and it has given a great impetus to microbial strain breeding and improvement. Aromatic chemicals are a variety of important chemicals that can be produced by microbial fermentation and are widely used in the pharmaceutical, food, feed, and material industry. Microbial cells can be engineered to accumulate a variety of useful aromatic chemicals in a targeted manner through rational engineering of the biosynthetic pathways of shikimate and the derived aromatic amino acids. This review summarizes the metabolic engineering strategies and biosynthetic pathways for the production of aromatic chemicals developed in the past 30 years, with the aim to provide a valuable reference and promote the research in this field.