Effect of Temperature Cycling Pretreatment on the Thermal Stability of Sm2(Co, Fe, Zr, Cu)17 Magnets in the Mild Temperature Range.

The irredeemable magnetic losses of Sm(Co, Fe, Zr, Cu)7.8 permanent magnets caused by oxidation are very important for their practical application. In this work, the simulated results with R2 ≥ 98% based on the data of the temperature cycling test and the long-term isothermal test for the original samples confirmed that the magnetic flux losses reached 9.38% after the 5000th cycle in range R.T.-300 °C, and 7.15% after oxidated at 180 °C for 10 years, respectively. Demagnetization curves showed that the low-temperature oxidation mainly led to the remanence attenuation, while the coercivity remained relatively stable. SEM observation and EDS analysis revealed that an oxide outer layer with a thickness of 1.96 µm was formed on the surface of the original sample at 180 °C for 180 days, in which there was no enrichment or precipitation of metal elements. However, once a Cu, O-rich outer layer with a thickness of 0.72 µm was grown by using a temperature cycling from -50-250 °C for three cycles, the attenuation of magnetic properties could be inhibited under the low-temperature oxidation. This work suggested that the magnetic attenuation of Sm2Co17-type permanent magnets in the low-temperature field could not be ignored, and provided a simple method to suppress this attenuation of magnetic properties below 300 °C.

A NAC Transcription Factor from 'Sea Rice 86' Enhances Salt Tolerance by Promoting Hydrogen Sulfide Production in Rice Seedlings.

Soil salinity severely threatens plant growth and crop performance. Hydrogen sulfide (H2S), a plant signal molecule, has been implicated in the regulation of plant responses to salinity stress. However, it is unclear how the transcriptional network regulates H2S biosynthesis during salt stress response. In this study, we identify a rice NAC (NAM, ATAF and CUC) transcription factor, OsNAC35-like (OsNACL35), from a salt-tolerant cultivar 'Sea Rice 86' (SR86) and further show that it may have improved salt tolerance via enhanced H2S production. The expression of OsNACL35 was significantly upregulated by high salinity and hydrogen peroxide (H2O2). The OsNACL35 protein was localized predominantly in the nucleus and was found to have transactivation activity in yeast. The overexpression of OsNACL35 (OsNACL35-OE) in japonica cultivar Nipponbare ramatically increased resistance to salinity stress, whereas its dominant-negative constructs (SUPERMAN repression domain, SRDX) conferred hypersensitivity to salt stress in the transgenic lines at the vegetative stage. Moreover, the quantitative real-time PCR analysis showed that many stress-associated genes were differentially expressed in the OsNACL35-OE and OsNACL35-SRDX lines. Interestingly, the ectopic expression of OsNACL35 triggered a sharp increase in H2S content by upregulating the expression of a H2S biosynthetic gene, OsDCD1, upon salinity stress. Furthermore, the dual luciferase and yeast one-hybrid assays indicated that OsNACL35 directly upregulated the expression of OsDCD1 by binding to the promoter sequence of OsDCD1. Taken together, our observations illustrate that OsNACL35 acts as a positive regulator that links H2S production to salt stress tolerance, which may hold promising utility in breeding salt-tolerant rice cultivar.

Mirror-like Bright Al-Mn Coatings Electrodeposition from 1-Ethyl-3 Methylimidazolium Chloride-AlCl3-MnCl2 Ionic Liquids with Pyridine Derivatives.

The effects of three pyridine derivative additives, 4-hydroxypyridine, 4-picolinic acid, and 4-cyanopyridine, on Al-Mn coatings were investigated in 1-ethyl-3-methylimidazolium chloride-AlCl3-MnCl2 (EMIC-AlCl3-MnCl2) ionic liquids. The smooth mirror-like bright Al-Mn coatings were obtained only in the EMIC-AlCl3-MnCl2 ionic liquids containing 4-cyanopyridine, while the matte Al-Mn coatings were electrodeposited from EMIC-AlCl3-MnCl2 without additives or containing either 4-hydroxypyridine or 4-picolinic acid. The scanning electron microscope and X-ray diffraction showed that the bright Al-Mn coatings consisted of nanocrystals and had a strong (200) preferential orientation, while the particle size of matte Al-Mn coatings were within the micron range. The brightening mechanism of 4-cyanopyridine is due to it being adsorbed onto the cathode to produce the combined effect of (1) generating an overpotential to promote Al-Mn nucleation; (2) inhibiting the growth of the deposited nuclei and enabling them grow preferentially, making the coating composed of nanocrystals and with a smooth surface. The brightening effect of 4-cyanopyridine on the Al-Mn coatings was far better than that of the 4-hydroxypyridine and the 4-picolinic acid. In addition, the bright Al-Mn coating was prepared in a bath with 6 mmol·L-1 4-cyanopyridine and displayed superior corrosion resistance relative to the matte coatings, which could be attributed to its unique nanocrystalline structure that increased the number of grain boundaries and accelerated the formation of the protective layer of the corrosion products.