A novel approach to Fabry-Pérot-resonance-based lens and demonstrating deep-subwavelength imaging.

During our research, we explored a novel way to represent subwavelength imaging and derived a transmission equation to explicate the FP (Fabry-Pérot) resonance phenomena. Subsequently, using analysis and observation, we performed deep-subwavelength imaging. Both numerically and experimentally, imaging with super-resolution was achieved at deep subwavelength scale of λ/56.53 with a lens thickness 212 mm. Our results also showed that by increasing lens thickness, higher resolution can be achieved. Moreover, via a single source study, we showed the full width at half maximum range and predicted the size of smallest detectable object. We also observed that with a greater lens thickness, finer features could be detected. These findings may open a new route in near-field imaging for practical applications such as biometric sensors, ultrasonic medical equipment, and non-destructive testing.

Multimodal and Covert-Overt Convertible Structural Coloration Transformed by Mechanical Stress.

Most materials and devices with structurally switchable color features responsive to external stimuli can actively and flexibly display various colors. However, realizing covert-overt transformation behavior, especially switching between transparent and colored states, is more challenging. A composite laminate of soft poly(dimethylsiloxane) (PDMS) with a rigid SiO2 -nanoparticle (NP) structure pattern is developed as a multidimensional structural color platform. Owing to the similarity in the optical properties of PDMS and SiO2 NPs, this device is fully transparent in the normal state. However, as their mechanical strengths differ considerably, upon compressive loading, a buckling-type instability arises on the surface of the laminate, leading to the generation of 1D or 2D wrinkled patterns in the form of gratings. Finally, an application of the device in which quick response codes are displayed or hidden as covert-overt convertible colored patterns for optical encryption/decryption, showing their remarkable potential for anticounterfeiting applications, is demonstrated.

In-depth study on resonant tunneling for subwavelength imaging.

We report new frequency bands for subwavelength imaging by using the resonant tunneling method which have not been explored previously. As per the existing theory of resonant tunneling, imaging frequency is limited for a certain number of crystals. However, after conducting an analytical analysis over a wide range of frequencies, we observed that higher frequencies do exist for subwavelength imaging. We verified this observation both numerically and experimentally. We extended our study to observe the effect of lattice periodicity on image resolution. By reducing periodicity during experiment, we achieved a resolution of λ/9.5 at the conventional region and λ/2.45 at the higher band region.

Infrared broadband metasurface absorber for reducing the thermal mass of a microbolometer.

We demonstrate an infrared broadband metasurface absorber that is suitable for increasing the response speed of a microbolometer by reducing its thermal mass. A large fraction of holes are made in a periodic pattern on a thin lossy metal layer characterised with a non-dispersive effective surface impedance. This can be used as a non-resonant metasurface that can be integrated with a Salisbury screen absorber to construct an absorbing membrane for a microbolometer that can significantly reduce the thermal mass while maintaining high infrared broadband absorption in the long wavelength infrared (LWIR) band. The non-dispersive effective surface impedance can be matched to the free space by optimising the surface resistance of the thin lossy metal layer depending on the size of the patterned holes by using a dc approximation method. In experiments a high broadband absorption was maintained even when the fill factor of the absorbing area was reduced to 28% (hole area: 72%), and it was theoretically maintained even when the fill factor of the absorbing area was reduced to 19% (hole area: 81%). Therefore, a metasurface with a non-dispersive effective surface impedance is a promising solution for reducing the thermal mass of infrared microbolometer pixels.

Inkjet Printing Based Mono-layered Photonic Crystal Patterning for Anti-counterfeiting Structural Colors.

Photonic crystal structures can be created to manipulate electromagnetic waves so that many studies have focused on designing photonic band-gaps for various applications including sensors, LEDs, lasers, and optical fibers. Here, we show that mono-layered, self-assembled photonic crystals (SAPCs) fabricated by using an inkjet printer exhibit extremely weak structural colors and multiple colorful holograms so that they can be utilized in anti-counterfeit measures. We demonstrate that SAPC patterns on a white background are covert under daylight, such that pattern detection can be avoided, but they become overt in a simple manner under strong illumination with smartphone flash light and/or on a black background, showing remarkable potential for anti-counterfeit techniques. Besides, we demonstrate that SAPCs yield different RGB histograms that depend on viewing angles and pattern densities, thus enhancing their cryptographic capabilities. Hence, the structural colorations designed by inkjet printers would not only produce optical holograms for the simple authentication of many items and products but also enable a high-secure anti-counterfeit technique.

Directional Reflective Surface Formed via Gradient-Impeding Acoustic Meta-Surfaces.

Artificially designed acoustic meta-surfaces have the ability to manipulate sound energy to an extraordinary extent. Here, we report on a new type of directional reflective surface consisting of an array of sub-wavelength Helmholtz resonators with varying internal coiled path lengths, which induce a reflection phase gradient along a planar acoustic meta-surface. The acoustically reshaped reflective surface created by the gradient-impeding meta-surface yields a distinct focal line similar to a parabolic cylinder antenna, and is used for directive sound beamforming. Focused beam steering can be also obtained by repositioning the source (or receiver) off axis, i.e., displaced from the focal line. Besides flat reflective surfaces, complex surfaces such as convex or conformal shapes may be used for sound beamforming, thus facilitating easy application in sound reinforcement systems. Therefore, directional reflective surfaces have promising applications in fields such as acoustic imaging, sonic weaponry, and underwater communication.

Sound pressure level gain in an acoustic metamaterial cavity.

The inherent attenuation of a homogeneous viscous medium limits radiation propagation, thereby restricting the use of many high-frequency acoustic devices to only short-range applications. Here, we design and experimentally demonstrate an acoustic metamaterial localization cavity which is used for sound pressure level (SPL) gain using double coiled up space like structures thereby increasing the range of detection. This unique behavior occurs within a subwavelength cavity that is 1/10(th) of the wavelength of the incident acoustic wave, which provides up to a 13 dB SPL gain. We show that the amplification results from the Fabry-Perot resonance of the cavity, which has a simultaneously high effective refractive index and effective impedance. We also experimentally verify the SPL amplification in an underwater environment at higher frequencies using a sample with an identical unit cell size. The versatile scalability of the design shows promising applications in many areas, especially in acoustic imaging and underwater communication.

Emission enhancement of sound emitters using an acoustic metamaterial cavity.

The emission enhancement of sound without electronic components has wide applications in a variety of remote systems, especially when highly miniaturized (smaller than wavelength) structures can be used. The recent advent of acoustic metamaterials has made it possible to realize this. In this study, we propose, design, and demonstrate a new class of acoustic cavity using a double-walled metamaterial structure operating at an extremely low frequency. Periodic zigzag elements which exhibit Fabry-Perot resonant behavior below the phononic band-gap are used to yield strong sound localization within the subwavelength gap, thus providing highly effective emission enhancement. We show, both theoretically and experimentally, 10 dB sound emission enhancement near 1060 Hz that corresponds to a wavelength approximately 30 times that of the periodicity. We also provide a general guideline for the independent tuning of the quality factor and effective volume of acoustic metamaterials. This approach shows the flexibility of our design in the efficient control of the enhancement rate.

Reduced temperature-dependent thermal conductivity of magnetite thin films by controlling film thickness.

We report on the out-of-plane thermal conductivities of epitaxial Fe3O4 thin films with thicknesses of 100, 300, and 400 nm, prepared using pulsed laser deposition (PLD) on SiO2/Si substrates. The four-point probe three-omega (3-ω) method was used for thermal conductivity measurements of the Fe3O4 thin films in the temperature range of 20 to 300 K. By measuring the temperature-dependent thermal characteristics of the Fe3O4 thin films, we realized that their thermal conductivities significantly decreased with decreasing grain size and thickness of the films. The out-of-plane thermal conductivities of the Fe3O4 films were found to be in the range of 0.52 to 3.51 W/m · K at 300 K. For 100-nm film, we found that the thermal conductivity was as low as approximately 0.52 W/m · K, which was 1.7 to 11.5 order of magnitude lower than the thermal conductivity of bulk material at 300 K. Furthermore, we calculated the temperature dependence of the thermal conductivity of these Fe3O4 films using a simple theoretical Callaway model for comparison with the experimental data. We found that the Callaway model predictions agree reasonably with the experimental data. We then noticed that the thin film-based oxide materials could be efficient thermoelectric materials to achieve high performance in thermoelectric devices.

Optimal moth eye nanostructure array on transparent glass towards broadband antireflection.

Broadband antireflection (AR) is essential for improving the photocurrent generation of photovoltaic modules or the enhancement of visibility in optical devices. Beyond conventional AR coating methods, moth eye mimicking nanostructures give new directions to enhance broadband antireflection through the selection of geometrical parameters, such as height, periodic distance, shape, and arrangement. This study numerically and experimentally investigates the behavior of light on complex nanostructures designed to mimic the surface of the moth eye with mixed shapes and various arrangements. To obtain broadband AR, we rigorously study the design parameters, such as height, periodic distance, shape, and arrangement, on a transparent quartz substrate. Several kinds of nanopillar arrays are elaborately fabricated including mixed nanostructures comprising pointy and round shapes in ordered and random arrangements via colloidal lithography. The optimal morphology of moth eye nanostructure arrays for broadband antireflection is suggested in view of reflectance and average weight transmittance.