An ultrasensitive human cardiac troponin T graphene screen-printed electrode based on electropolymerized-molecularly imprinted conducting polymer.

A nano-molecularly imprinted polymer (N-MIP) assembled on a screen-printed electrode for the cardiac troponin T (cTnT) was developed. The biomimetic surface was obtained by a co-polymer matrix assembled on the reduced graphene oxide (RGO) electrode surface. The cTnT active sites were engineered using pyrrole and carboxylated pyrrole that was one-step electropolymerized jointly with cTnT by cyclic voltammetry. The stepwise preparation of the biomimetic surface was characterized by cyclic and differential pulse voltammetries using the ferrocyanide/ferricyanide as redox probe. Structural and morphological characterization was also performed. The optimal relation of pyrrole and pyrrole-3-acid carboxylic to perform the cTnT biomimetic nanosurface was obtained at 1:5 ratio. The analytical performance of cTnT N-MIP performed by differential pulse voltammetry showed a linear range from 0.01 to 0.1 ngmL(-1) (r=0.995, p«0.01), with a very low limit of detection (0.006 ngmL(-1)). The synergic effect of conductive polymer and graphene forming 3D structures of reactive sites resulted in a N-MIP with excellent affinity to cTnT binding (KD=7.3 10(-13) molL(-1)). The N-MIP proposed is based on a simple method of antibody obtaining with a large potential for point-of-care testing applications.

Disposable immunosensor for human cardiac troponin T based on streptavidin-microsphere modified screen-printed electrode.

Screen-printed electrodes (SPE) have been widely used in the design of disposable sensors bringing advances in the use of electrochemical immunosensors for in field-clinical analysis. In this work, streptavidin polystyrene microspheres were incorporated to the electrode surface of SPEs in order to increase the analytical response of the cardiac troponin T (cTnT), a specific biomarker for the acute myocardial infarction diagnosis. The precise calculation of the stoichiometric streptavidin-biotin ratio [1:4] allowed the increase of sensitivity and stability of the immunosensor response to the cTnT analyte. The surface of the immunosensor was characterized by scanning electron microscopy and cyclic voltammetry. It was observed that the use of streptavidin microspheres significantly increased the analytical sensitivity of the electrode in 8.5 times, showing a curve with a linear response range between 0.1 and 10 ngmL(-1) of cTnT and a detection limit of 0.2 ngmL(-1). The proposed SPE showed ease preparation and high sensitivity allowing the detection of cTnT in the range of clinical levels. The new device coupled with a portable electrochemical analyzer shows great promise for point-of-care quantitative testing of necrosis cardiac proteins.