Identification and quantification of key phytochemicals in peas - Linking compounds with sensory attributes.

Pea protein isolates contain high-quality plant protein. However, they have sensory drawbacks, notably bitterness and astringency, that have limited their use in commercial foods. This study's aim was thus to identify the main phytochemicals in pea-based samples and to examine associations with sensory attributes. The phytochemical profiles of pea flour, pea protein isolates, and pea protein isolate fractions were characterized via UHPLC-DAD-MS. A total of 48 phytochemicals have been revealed: 6 phenolic acids, 5 flavonoids, and 1 saponin were identified and quantified, while another 9 phenolic acids, 10 flavonoids, and 6 saponins were tentatively identified. The impacts of protein extraction and fractionation were studied. These processes appear to have caused some compound degradation. It was found that 29 compounds were correlated with perceived bitterness and/or astringency. Therefore, these results show that certain phytochemicals can lead to negative sensory attributes in pea-protein-based products.

Review: Quality of animal-source foods.

This article critically reviews the current state of knowledge on the quality of animal-source foods according to animal production and food processing conditions, including consumer expectations-behaviours and the effects of consumption of animal-source foods on human health. Quality has been defined through seven core attributes: safety, commercial, sensory, nutritional, technological, convenience, and image. Image covers ethical, cultural and environmental dimensions associated with the origin of the food and the way it is produced and processed. This framework enabled to highlight the priorities given to the different quality attributes. It also helped to identify potential antagonisms and synergies among quality attributes, between production and processing stages, and among stakeholders. Primacy is essentially given to commercial quality attributes, especially for standard commodity animal-source foods. This primacy has strongly influenced genetic selection and farming practices in all livestock commodity chains and enabled substantial quantitative gains, although at the expense of other quality traits. Focal issues are the destructuration of chicken muscle that compromises sensory, nutritional and image quality attributes, and the fate of males in the egg and dairy sectors, which have heavily specialised their animals. Quality can be gained but can also be lost throughout the farm-to-fork continuum. Our review highlights critical factors and periods throughout animal production and food processing routes, such as on-farm practices, notably animal feeding, preslaughter and slaughter phases, food processing techniques, and food formulation. It also reveals on-farm and processing factors that create antagonisms among quality attributes, such as the castration of male pigs, the substitution of marine-source feed by plant-based feed in fish, and the use of sodium nitrite in meat processing. These antagonisms require scientific data to identify trade-offs among quality attributes and/or solutions to help overcome these tensions. However, there are also food products that value synergies between quality attributes and between production and processing phases, particularly Geographical Indications, such as for cheese and dry-cured ham. Human epidemiological studies have found associations between consumption of animal-source foods and increased or decreased risk for chronic non-communicable diseases. These associations have informed public health recommendations. However, they have not yet considered animal production and food processing conditions. A concerted and collaborative effort is needed from scientists working in animal science, food process engineering, consumer science, human nutrition and epidemiology in order to address this research gap. Avenues for research and main options for policy action are discussed.

Gastro-intestinal in vitro digestions of protein emulsions monitored by pH-stat: Influence of structural properties and interplay between proteolysis and lipolysis.

This study describes an experimental design, based on pH-stat, to rapidly screen and assess food formulation effects on the degrees of hydrolysis (DH) of both proteins and lipids throughout in vitro gastro-intestinal digestions. This approach was used to quantitatively compare and hierarchize key structure parameters of protein emulsions. Six matrices (15 wt% whey proteins, 0 or 10 wt% oil), each differing by at least one structure characteristic, were studied. The physical state of the bulk and the oil droplet size were the major structural levers to modulate the hydrolysis of proteins (final DH between 51.7 and 58.3%) and lipids (final DH between 46.9 and 72.7%), with non-trivial interplays between proteolysis and lipolysis. Additionally, pH-stat measurements in presence of a pancreatic lipase inhibitor proved to be an efficient way to widen the scope of the proposed experimental approach to foods that are intrinsically made of both proteins and lipids.

Gaining deeper insight into aroma perception: An integrative study of the oral processing of breads with different structures.

The objective of this study was to investigate for the first time the influence of bread structure, volatile compounds, and oral processing on aroma perception. 3 types of French baguette were created using the same raw ingredients but different bread-making processes; they consequently varied in their crumb and crust structures. We characterized the initial volatile profiles of two bread structural subtypes-namely bread crumb and bread crumb with crust-using proton transfer reaction-mass spectrometry (PTR-MS) headspace analysis. Three types of bread were characterized by thirty-nine ion fragments from m/z 45 to 139. We then conducted a study in which 8 participants scored aroma attribute intensities for the different bread types and subtypes at 3 key stages of oral processing (10, 40, and 100% of individual swallowing time). At these 3 time points, we collected boli from the participants and characterized their volatile profiles using PTR-MS headspace analysis. The results suggest saliva addition dilutes volatile compounds, reducing volatile release during oral processing. Thus, a bread with high porosity and high hydration capacity was characterized by a low volatile release above boli. We examined the relationships between 4 aroma attributes of bread crumb with crust and 24 discriminatory fragment ions found in boli headspace. This study demonstrated for the first time that the perceived aroma of crumb with crust was influenced more by volatile profiles than by crumb texture. It thus contributes to our understanding of aroma perception dynamics and the mechanisms driving volatile release during oral processing in bread.

Breakdown pathways during oral processing of different breads: impact of crumb and crust structures.

Oral processing during bread consumption is a key process related to the dynamics of texture perceptions, sensory stimuli release and starch digestion. The aim of this study was to determine the respective contribution of bread properties (composition and structure of crumb and crust) and of the oral physiology of subjects to the breakdown pathways in the mouth. The properties of the in vivo bread bolus obtained from eight healthy subjects were studied at three key points in time during their oral processing. The progressive lubrication and breakdown of bread were observed, as well as the beginning of the enzymatic degradation of starch. The study showed that "time" was the factor responsible for the greatest variability in bolus properties. Breakdown pathways were established for crumbs with and without crust. The presence of crust modified the oral processing, increasing, for instance, the heterogeneity of particle size at the middle of the oral processing sequence. Moreover, the hydration capacity of crust contributed to high starch degradation at swallowing time, in comparison with crumb alone. The main subject characteristics impacting bolus properties were the in-mouth duration, the individual masticatory index and the mouth volume, while the main bread properties explaining the bolus properties were the initial composition and the water-absorbing capacity. We concluded that both crumb and crust structures had an impact on the oral processing, affecting the capacity of hydration, the rheology and the breakdown degree of the bolus.

Respective impact of bread structure and oral processing on dynamic texture perceptions through statistical multiblock analysis.

Texture perception is a multidimensional and dynamic phenomenon resulting from both the initial structure of food and its breakdown during oral processing. The aim of this study is to identify the respective contribution of food and bolus properties to temporal changes in texture perceptions during bread consumption. For this purpose, the perception dynamics of three French baguettes with dif\ferent structures were assessed through Temporal Dominance of Sensations and Progressive Profiling. Samples of crumb with and without crust were tasted by trained panelists. The intensities of nine texture attributes were evaluated at three key stages of oral processing (10%, 40% and 100% of individual swallowing time) using the Progressive Profiling method. Six of them were related with a Multiblock Partial Least Squares (MB-PLS) regression to the initial bread properties and to some bolus properties measured at these three stages. The evolution during oral processing of some attributes such as "soft", "dry", "doughy" and "sticky" was more influenced by modifications of bolus properties than by the initial characteristics of the breads. Among bolus properties, the MB-PLS highlighted that the hydration and texture properties of the bolus had a greater impact on texture perceptions than bolus structure. The "aerated" perception was more affected by the crumb structure, while the "heterogeneousness" and the "crispiness" were more affected by the presence of crust. This study thus contributes to improving our understanding of dynamic texture perceptions through a statistical model that takes the physical properties of bread and bolus during oral processing into account.

Main individual and product characteristics influencing in-mouth flavour release during eating masticated food products with different textures: mechanistic modelling and experimental validation.

A mechanistic model predicting flavour release during oral processing of masticated foods was developed. The description of main physiological steps (product mastication and swallowing) and physical mechanisms (mass transfer, product breakdown and dissolution) occurring while eating allowed satisfactory simulation of in vivo release profiles of ethyl propanoate and 2-nonanone, measured by Atmospheric Pressure Chemical Ionization Mass Spectrometry on ten representative subjects during the consumption of four cheeses with different textures. Model sensitivity analysis showed that the main parameters affecting release intensity were the product dissolution rate in the mouth, the mass transfer coefficient in the bolus, the air-bolus contact area in the mouth and the respiratory frequency. Parameters furthermore affecting release dynamics were the mastication phase duration, the velopharynx opening and the rate of saliva incorporation into the bolus. Specific retention of 2-nonanone on mucosa was assumed to explain aroma release kinetics and confirmed when gaseous samples were consumed.

Mechanisms explaining the role of viscosity and post-deglutitive pharyngeal residue on in vivo aroma release: A combined experimental and modeling study.

The objective of this study was to analyse the viscosity effect of liquid Newtonian products on aroma release, taking human physiological characteristics into account. In vivo release of diacetyl from glucose syrup solutions varying widely in viscosity (from 0.7 to 405mPas) was assessed by five panelists using Proton Transfer Reaction Mass Spectrometry (PTR-MS). The physicochemical properties of the solutions and the physiological parameters of subjects were experimentally measured. In parallel, a mechanistic model describing aroma release while eating a liquid food was developed. Model predictions based on the characteristics of the glucose syrup solution were invalidated when compared to in vivo measurements. Therefore, the assumption that the post-deglutitive pharyngeal residue was considerably diluted with saliva was introduced into the model. Under this hypothesis, the model gives a satisfactory prediction of the in vivo data. Thus, relevant properties to be considered for in vivo release were those of product-saliva mixes.

Quality changes in yogurt during storage in different packaging materials.

The influence of packaging polymers (polypropylene or polystyrene) on the sensory and physicochemical characteristics of flavoured stirred yogurts with either 0% or 4%-fat content was investigated during the 28 days of storage at 4°C. Regardless of the packaging type, complex viscosity and thickness perception increased during storage due to exopolysaccharide production, whereas the pH of yogurts decreased. Packaging type had a greater impact on 0%-fat yogurts than on 4%-fat yogurts for both sensory and physicochemical characteristics. During storage, 0%-fat yogurt conditioned in glass displayed the lowest aroma quantity decrease of the three types of packaging, in accordance with the olfactory properties. However, between the two polymer types, polystyrene packaging seemed to be preferable for limiting aroma compound losses and subsequent fruity note intensities, and for avoiding the development of odour and aroma defects. Less significant packaging effect was observed for 4%-fat yogurts.

Influence of proteins on the perception of flavored stirred yogurts.

Among yogurt dairy components, protein type is known to modify the texture of the products and the volatility of odorous volatile organic compounds. The aim of this study was to investigate the impact of 3 protein ratios (caseinate to total protein) on the sensory properties of 4% fat, strawberry-flavored stirred yogurts. A sensory methodology study was therefore investigated to choose the most efficient method in terms of sensitivity, quantification, and ease with which the panel could distinguish slight differences in olfactory property between the yogurts. Three kinds of product presentation procedures were compared: a monadic presentation, a comparative presentation, and a comparative presentation with a reference. The results showed that the 3 presentation methods emphasized some important texture differences between the yogurts in the same way. However, the comparative procedure with a reference was the only one to reveal clear olfactory property differences between the yogurts. The main effect of protein ratio variation in yogurt concerned the texture properties, which greatly differed between the 3 yogurts and was confirmed by complex viscosity measurements. Olfactory differences between the yogurts were more subtle. Overall, the flavor intensity and the fruity notes were less intense in the yogurts with the high caseinate ratio than in those with the low ratio. This result was in agreement with the physicochemical measurements, which showed a higher retention of a large majority of aroma compounds of the strawberry flavor in the yogurts with a high caseinate ratio.

In situ detoxification of the fermentation medium during gamma-decalactone production with the yeast sporidiobolus salmonicolor

gamma-Decalactone (gamma-C10) is known to be highly toxic for the microorganims used for its production. In this work, three techniques were studied in order to overcome this toxicity during a bioconversion process using ricinoleic acid as precursor of the lactone: in situ trapping in oily phases, in porous hydrophobic sorbents and in beta-cyclodextrins. Oily phases added to the media (olive, Miglyol, tributyrin, and paraffin) had a protective effect on Sp. salmonicolor, and they improved the lactone production. beta-cyclodextrins, which have a hydrophobic cavity that can trap molecules such as gamma-C10, have been used to protect the yeasts. The results showed insufficient preservation of cell viability. Some sorbents (activated carbon and polystyrene-based sorbents) were successfully tested during bioconversion. In all cases viability exceeded the reference one. Nevertheless the aroma production was 30% lower than the reference. All of these solutions led to some enhancement of the cell viability during bioconversion of methyl ricinoleate to gamma-C10. For improvement of the lactone production, the oil trapping method seemed to be the best with the experimental conditions tested.