Oxidation of imidacloprid insecticide through PMS activation using CuFe2O4 nanoparticles: role of process parameters and surface modifications.

The contamination of water bodies by synthetic organic compounds coupled with climate change and the growing demand for water supply calls for new approaches to water management and treatment. To tackle the decontamination issue, the activation of peroximonosulfate (PMS) using copper magnetic ferrite (CuMF) nanoparticles prepared under distinct synthesis conditions was assessed to oxidize imidacloprid (IMD) insecticide. After optimization of some operational variables, such as CuMF load (62.5-250 mg L-1), PMS concentration (250-1000 µM), and solution pH (3-10), IMD was completely oxidized in 2 h without interferences from leached metal ions. Such performance was also achieved when using tap water but was inhibited by a simulated municipal wastewater due to scavenging effects promoted by inorganic and organic species. Although there was evidence of the presence of sulfate radicals and singlet oxygen oxidizing species, only four intermediate compounds were detected by liquid chromatography coupled to mass spectrometry analysis, mainly due to hydroxyl addition reactions. Concerning the changes in surface properties of CuMF after use, no morphological or structural changes were observed except a small increase in the charge transfer resistance. Based on the changes of terminal surface groups, PMS activation occurred on Fe sites.

Effects of cocaine, nicotine, and marijuana exposure in Drosophila Melanogaster development: A systematic review and meta-analysis.

Abuse-related drug usage is a public health issue. Drosophila melanogaster has been used as an animal model to study the biological effects of these psychoactive substances in preclinical studies. Our objective in this review is to evaluate the adverse effects produced by cocaine, nicotine, and marijuana during the development of D. melanogaster. We searched experimental studies in which D. melanogaster was exposed to these three psychoactive drugs in seven online databases up to January 2023. Two reviewers independently extracted the data. Fifty-one studies met eligibility criteria and were included in the data extraction: nicotine (n = 26), cocaine (n = 20), and marijuana (n = 5). Fifteen studies were eligible for meta-analysis. Low doses (∼0.6 mM) of nicotine increased locomotor activity in fruit flies, while high doses (≥3 mM) led to a decrease. Similarly, exposure to cocaine increased locomotor activity, resulting in decreased climbing response in D. melanogaster. Studies with exposure to marijuana did not present a profile for our meta-analysis. However, this drug has been less associated with locomotor changes, but alterations in body weight and fat content and changes in cardiac function. Our analyses have shown that fruit flies exposed to drugs of abuse during different developmental stages, such as larvae and adults, exhibit molecular, morphological, behavioral, and survival changes that are dependent on the dosage. These phenotypes resemble the adverse effects of psychoactive substances in clinical medicine.

Crack cocaine inhalation increases seizure susceptibility by reducing acetylcholinesterase activity.

Crack cocaine is a highly addictive and potent stimulant drug. Animal studies have shown that the cholinergic system plays a role in neurotoxicity induced by cocaine or its active metabolites inhalation. Behavioral alterations associated with crack cocaine use include hyperactivity, depressed mood, and decreased seizure threshold. Here we evaluate the acetylcholinesterase (AChE) and reactive oxygen species (ROS) activity, behavioral profile, and the threshold for epileptic seizures in rats that received intrahippocampal pilocarpine (H-PILO) followed by exposure to crack cocaine (H-PILO + CRACK). Animals exposed to H-PILO + CRACK demonstrated increased severity and frequency of limbic seizures. The AChE activity was reduced in the groups exposed to crack cocaine alone (CRACK) and H-PILO + CRACK, whereas levels of ROS remained unchanged. In addition, crack cocaine exposure increased vertical locomotor activity, without changing water and sucrose intake. Short-term memory consolidation remained unchanged after H-PILO, H-PILO + CRACK, and CRACK administration. Overall, our data suggest that crack cocaine inhalation reduced the threshold for epileptic seizures in rats submitted to low doses of pilocarpine through the inhibition of AChE. Taken together, our findings can be useful in the development of effective strategies for preventing and treating the harmful effects of cocaine and crack cocaine on the central nervous system.

Profile of metacaspase gene expression in Plasmodium vivax field isolates from the Brazilian Amazon.

BACKGROUND: Metacaspases comprise a family of cysteine proteases implicated in both cell death and cell differentiation of protists that has been considered a potential drug target for protozoan parasites. However, the biology of metacaspases in Plasmodium vivax - the second most prevalent and most widespread human malaria parasite worldwide, whose occurrence of chemoresistance has been reported in many endemic countries, remains largely unexplored. Therefore, the present study aimed to address, for the first time, the expression pattern of metacaspases in P. vivax parasites. METHODS AND RESULTS: P. vivax blood-stage parasites were obtained from malaria patients in the Brazilian Amazon and the expression of the three putative P. vivax metacaspases (PvMCA1-3) was detected in all isolates by quantitative PCR assay. Of note, the expression levels of each PvMCA varied noticeably across isolates, which presented different frequencies of parasite forms, supporting that PvMCAs may be expressed in a stage-specific manner as previously shown in P. falciparum. CONCLUSION: The detection of metacaspases in P. vivax blood-stage parasites reported herein, allows the inclusion of these proteases as a potential candidate drug target for vivax malaria, while further investigations are still required to evaluate the activity, role and essentiality of metacaspases in P. vivax biology.

Assessment of Allelopathic Potential of Cotton Chromosome Substitution Lines.

Weed interference consistently poses a significant agronomic challenge in cotton production, leading to unfavorable direct and indirect consequences. Consequently, the predominant strategy employed to manage weeds is the application of synthetic herbicides. However, this extensive reliance has resulted in the development of herbicide-resistant weed populations due to the prolonged use of a single herbicide and the lack of rotation. This project focused on identifying weed-suppressive cotton chromosome substitution (CS) lines. These CS lines closely resemble the parent TM-1, an upland cotton derivative (Gossypium hirsutum). Each CS line carries a single chromosome or chromosome arm exchanged from G. barbadense, G. tomentosum, or G. mustelinum within the TM-1 background. In a greenhouse experiment utilizing a stepwise approach, five CS lines, along with two conventional varieties (Enlist and UA48) and the parent line (TM1), were assessed to determine their potential for suppressing Palmer amaranth growth. The plant height was measured 7, 14, and 21 days after establishment, and the chlorophyll content was measured 21 days after establishment. The results revealed varying levels of chlorophyll reduction in Palmer amaranth, with the Enlist variety displaying the lowest reduction (32%) and TM-1 exhibiting the highest (78%). Within 14 days of establishment, the CS lines T26lo, BNTN 1-15, and T11sh demonstrated substantial suppression of Palmer amaranth height, with reductions of 79, 70, and 71%, respectively. Conversely, Enlist displayed the least effective performance among the CS lines. Moreover, CS22, CS49, CS50, CS34, UA48, and CS23 displayed a decreasing trend in reducing Palmer amaranth height from 14 to 21 days after establishment. This research demonstrates the inherent herbicidal attributes within cotton CS lines against Palmer amaranth. In light of the versatile applications of cotton fibers and the unique characteristics of the G. hirsutum genome, this study investigates the potential of specific cotton lines in enhancing weed management practices. By elucidating the implications of our findings, we aim to contribute to promoting sustainability and developing alternatives to synthetic herbicides in agricultural systems.

Surgical Management of Wilms Tumors with Intravenous Extension: A Multicenter Analysis of Clinical Management with Technical Insights.

BACKGROUND: About 5% of Wilms tumors present with vascular extension, which sometimes extends to the right atrium. Vascular extension does not affect the prognosis, but impacts the surgical strategy, which is complex and not fully standardized. Our goal is to identify elements of successful surgical management of Wilms tumors with vascular extensions. PATIENTS AND METHODS: A retrospective study of pediatric Wilms tumors treated at three sites (January 1999-June 2019) was conducted. The inclusion criterion was the presence of a renal vein and vena cava thrombus at diagnosis. Tumor stage, pre and postoperative treatment, preoperative imaging, operative report, pathology, operative complications, and follow-up data were reviewed. RESULTS: Of the 696 pediatric patients with Wilms tumors, 69 (9.9%) met the inclusion criterion. In total, 24 patients (37.5%) had a right atrial extension and two presented with Budd-Chiari syndrome at diagnosis. Two died at diagnosis owing to pulmonary embolism. All patients received neoadjuvant chemotherapy and thrombus regressed in 35.6% of cases. Overall, 14 patients had persistent intra-atrial thrombus extension (58%) and underwent cardiopulmonary bypass. Most thrombi (72%) were removed intact with nephrectomy. Massive intraoperative bleeding occurred during three procedures. Postoperative renal insufficiency was identified as a risk factor for patient survival (p = 0.01). With a median follow-up of 9 years (range: 0.5-20 years), overall survival was 89% and event-free survival was 78%. CONCLUSIONS: Neoadjuvant chemotherapy with proper surgical strategy resulted in a survival rate comparable to that of children with Wilms tumors without intravascular extension. Clinicians should be aware that postoperative renal insufficiency is associated with worse survival outcomes.

The inclusion of Amazon mangroves in Brazil's REDD+ program.

The Legal Amazon of Brazil holds vast mangrove forests, but a lack of awareness of their value has prevented their inclusion into results-based payments established by the United Nations Framework Convention on Climate Change. Based on an inventory from over 190 forest plots in Amazon mangroves, we estimate total ecosystem carbon stocks of 468 ± 67 Megagrams (Mg) ha-1; which are significantly higher than Brazilian upland biomes currently included into national carbon offset financing. Conversion of mangroves results in potential emissions of 1228 Mg CO2e ha-1, which are 3-fold higher than land use emissions from conversion of the Amazon rainforest. Our work provides the foundation for the inclusion of mangroves in Brazil's intended Nationally Determined Contribution, and here we show that halting mangrove deforestation in the Legal Amazon would generate avoided emissions of 0.9 ± 0.3 Teragrams (Tg) CO2e yr-1; which is equivalent to the annual carbon accumulation in 82,400 ha of secondary forests.

Cardioprotective Effects of Leucine Supplementation against Doxorubicin-Induced Cardiotoxicit.

Doxorubicin is one of the most important antitumor drugs used in oncology; however, its cardiotoxic effect limits the therapeutic use and raises concerns regarding patient prognosis. Leucine is a branched-chain amino acid used in dietary supplementation and has been studied to attenuate the toxic effects of doxorubicin in animals, which increases oxidative stress. Oxidative stress in different organs can be estimated using several methods, including catalase expression analysis. This study aimed to analyze the effect of leucine on catalase levels in rat hearts after doxorubicin administration. Adult male Wistar rats were separated into two groups: Standard diet (SD) and 5% Leucine-Enriched Diet (LED). The animals had free access to diet from D0 to D28. At D14, the groups were subdivided in animals injected with Doxorubicin and animals injected with vehicle, until D28, and the groups were SD, SD + Dox, LED and LED + Dox. At D28, the animals were submitted do Transthoracic Echocardiography and euthanized. Despite Dox groups had impaired body weight gain, raw heart weight was not different between the groups. No substantial alterations were observed in macroscopic evaluation of the heart. Although, Doxorubicin treatment increased total interstitial collagen in the heart, which in addition to Type I collagen, is lower in LED groups. Western blot analysis showed that catalase expression in the heart of LED groups was lower than that in SD groups. In conclusion, leucine supplementation reduced both the precocious Dox-induced cardiac remodeling and catalase levels in the heart.

Effect of the use of bromelain associated with bioactive glass-ceramic on dentin/adhesive interface.

OBJECTIVES: To evaluate the effect of bromelain associated with Biosilicate on the bond strength (BS) of a universal adhesive system to sound (SD) and caries-affected dentin (CAD), and on the proteolytic activity. MATERIALS AND METHODS: Cavities were prepared in 360 molars, half submitted to cariogenic challenge. Teeth were separated into groups (n=20): Control-No treatment; CHX-0.12% chlorhexidine; NaOCl-5% sodium hypochlorite; Br5%-5% bromelain; Br10%-10% bromelain; Bio-10% Biosilicate; NaOClBio-NaOCl+Bio; Br5%Bio-Br5%+Bio; Br10%Bio-Br10%+Bio. Following treatments, the adhesive system was applied, and cavities were restored. Samples were sectioned into sticks and stored at 37 °C for 24 h, 6 months, and 1 year. Microtensile BS (2-way ANOVA, Bonferroni's test, α=0.05), fracture patterns (SEM), and adhesive interfaces (TEM) were evaluated. Bacterial collagenase assay and in situ zymography were performed. RESULTS: In CAD, Br10% presented higher BS (p=0.0208) than Br5%Bio. Br5% presented higher BS (p=0.0033) after 6 months than after 24 h; and association of treatments, higher BS (p<0.05) after aging than after 24 h. Mixed fractures were the most prevalent. Association of treatments promoted a more uniform hybrid layer with embedded Bio particles. Experimental groups presented lower (p<0.0001) relative fluorescence units than Control. Bromelain, associated or not with Bio, showed collagenolytic degradation. CONCLUSIONS: Bromelain associated with Biosilicate did not affect the BS to SD. In CAD, Br5%Bio decreased immediate BS but had no long-term influence. This association decreased the proteolytic activity. CLINICAL RELEVANCE: Bromelain and Biosilicate may enhance the longevity of adhesive restorations by inhibiting endogenous proteases.

Mitochondrial genome of Hancornia speciosa gomes: intergenic regions containing retrotransposons and predicted genes.

BACKGROUND: Plant mitochondrial genomes are characterized by high homologous recombination, extensive intergenic spacers, conservation in DNA sequences, and gene content. The Hancornia genus belongs to the Apocynaceae family, with H. speciosa Gomes being the sole species in the genus. It is an siganificant commercial fruit crop; however, only a number of studies have been conducted. In this study, we present the mitochondrial genome of H. speciosa and compare it with other mitochondrial genomes within the Apocynaceae family. METHODS AND RESULTS: A total of 2.8 Gb of Illumina paired-end reads were used to obtain the mitogenome, resulting in 22 contigs that were merged using 6.1 Gb of Illumina mate-pair reads to obtain a circular chromosome. The mitochondrial genome of H. speciosa is circular, containing 63 predicted functional genes, spanning a length of 741,811 bp, with a CG content of 44%. Within the mitogenome, 50 chloroplast DNA sequences, equivalent to 1.72% of the genome, were detected. However, intergenic spaces accounted for 703,139 bp (94.79% of the genome), and 287 genes were predicted, totaling 173,721 bp. CONCLUSION: This suggests the incorporation of nuclear DNA into the mitogenome of H. speciosa and self duplication. Comparative analysis among the mitogenomes in the Apocynaceae family revealed a diversity in the structure mediated by recombination, with similar gene content and large intergenic spaces.

In silico and in vitro elastase inhibition assessment assays of rosmarinic acid natural product from Rosmarinus officinalis Linn.

The use of various herbs and their compounds has been a strategy widely used in the fight against various human diseases. For example, rosmarinic acid, a bioactive phenolic compound commonly found in Rosemary plants (Rosmarinus officinalis Labiatae), has multiple therapeutic benefits in different diseases, such as cancer. Therefore, the study aimed to evaluate in silico and in vitro the inhibition potential of the enzyme Elastase from the porcine pancreas by rosmarinic acid isolated from the plant species R. officinalis Linn. Through Molecular Docking, the mechanism of action was investigated. In addition, rosmarinic acid presented a range of 5-60 µg/mL and significantly inhibited Elastase. At 60 µg/mL, there was an inhibition of 55% on the enzymatic activity. The results demonstrate the inhibition of Elastase by rosmarinic acid, which can lead to the development of new enzyme inhibitors that can be an inspiration for developing various drugs, including anticancer drugs.

Mammary fibromatosis in a female dog: case report.

Fibromatosis, or desmoid tumour, is characterized by excessive and infiltrative proliferation of connective tissue originating from aponeurotic muscle structures. Mammary fibromatosis is rare in humans and animals and its precise aetiology is unknown. A 10-year-old mixed-breed female dog developed a mass in the right cranial thoracic mammary gland (M1) and underwent lumpectomy. The mass was firm, with an irregular surface and distinct limits. Microscopically, it was a neoplastic proliferation of fusiform cells with low atypia, interspersed with abundant dense collagenous tissue, confirmed by histochemical staining with Gomori's trichrome and Masson's trichrome and immunopositivity for vimentin and smooth muscle actin, confirming mammary fibromatosis. Mammary fibromatosis in dogs needs further studies to elucidate its clinical, epidemiological and aetiopathogenic aspects.

Effect of natural agents on the bond strength to eroded dentin.

OBJECTIVE: This study evaluated the effect of bromelain and propolis extract on the bond strength (BS) of a universal adhesive system to eroded dentin. MATERIALS AND METHODS: Sixty human molars with exposed dentin were halved, with one half protected by composite resin and the other subjected to erosive treatment followed by remineralization. After the erosive treatment, the composite resin was removed, and the teeth were randomly assigned to three groups (n = 20): Adhesive-Control System; Br-10%; Pr-16%. Following the treatments, composite resin blocks were built on the dentin surfaces and sticks of 0.9 mm2 were obtained and stored in distilled water at 37°C for 24 h and 6 months. After these periods, the sticks underwent bond strength testing and the data were analyzed using 2-way ANOVA, Bonferroni test, p < 0.05. Fracture patterns were observed using light microscope and scanning electron microscopy. RESULTS: Irrespective of the substrate and aging duration, propolis demonstrated higher BS (p < 0.05) compared to the other treatments. Eroded dentin exhibited greater removal of the smear layer and dentinal tubules with a larger diameter than sound dentin, especially when treated with bromelain, resulting in the formation of resin tags. CONCLUSIONS: Propolis consistently promoted the highest bond strength, irrespective of aging or substrate. Eroded dentin treated with propolis, or bromelain exhibited a higher prevalence of non-adhesive fractures and resin tag formation. CLINICAL SIGNIFICANCE: Propolis shows promise for enhancing the longevity of adhesive restorations in eroded dentin due to its ability to promote high bond strength.

Exploring the Mycovirus Sclerotinia sclerotiorum Hypovirulence-Associated DNA Virus 1 as a Biocontrol Agent of White Mold Caused by Sclerotinia sclerotiorum.

Sclerotinia sclerotiorum is a necrotrophic fungal pathogen causing white mold on many important economic crops. Recently, some mycoviruses such as S. sclerotiorum hypovirulence-associated DNA virus 1 (SsHADV-1) converted S. sclerotiorum into a beneficial symbiont that helps plants manage pathogens and other stresses. To explore the potential use of SsHADV-1 as a biocontrol agent in the United States and to test the efficacy of SsHADV-1-infected United States isolates in managing white mold and other crop diseases, SsHADV-1 was transferred from the Chinese strain DT-8 to United States isolates of S. sclerotiorum. SsHADV-1 is readily transmitted horizontally among United States isolates of S. sclerotiorum and consistently conferred hypovirulence to its host strains. Biopriming of dry bean seeds with hypovirulent S. sclerotiorum strains enhanced resistance to white mold, gray mold, and Rhizoctonia root rot. To investigate the underlying mechanisms, endophytic growth of hypovirulent S. sclerotiorum in dry beans was confirmed using PCR, and the expression of 12 plant defense-related genes were monitored before and after infection. The results indicated that the endophytic growth of SsHADV-1-infected strains in plants stimulated the expression of plant immunity pathway genes that assisted a rapid response from the plant to fungal infection. Finally, application of the seed biopriming technology with SsHADV-1-infected hypervirulent strain has promise for the biological control of several diseases of wheat, pea, and sunflower.

3D-printed and conventional provisional single crown fabrication on anterior implants: A randomized clinical trial.

OBJECTIVES: The present study aims to compare provisional single crowns on anterior implants made using conventional PMMA and 3D-printed workflows. The study assessed the occurrence of failures, color variation, signs of early deterioration, operating time, and patients' satisfaction with the treatment through a randomized controlled trial. METHODS: This study was conducted as a randomized controlled trial, following the SPIRIT and CONSORT guidelines. Patients were included in the study after meeting the eligibility criteria and were randomly assigned to one of two groups (conventional and 3D-printed). FDI criteria, visible plaque index (VPI), bleeding on probing (BOP), and color variation were considered as the primary outcomes. Operating time and patient satisfaction were also assessed as secondary outcomes. Fisher's exact test was performed to analyze the association between the primary and secondary outcomes and the study groups. Mann-Whitney test was used to compare the mean VAS satisfaction scores between the conventional PMMA and 3D-printed groups (STATA 14™, with an α = 0.05). RESULTS: A total of 42 provisional single crowns (n = 21) were made for 33 patients. Only the fracture parameter (FDI) showed a statistically significant difference, with 3D-printed provisionals exhibiting higher rates of catastrophic failures compared to conventional ones (p = 0.05). Although the operating time for the 3D-printed group was shorter (p < 0.001), no statistical difference observed in patients' satisfaction regarding esthetics, phonetics, chewing, or comfort. SIGNIFICANCE: 3D-printed and conventional PMMA provisional single crowns showed comparable clinical performance, except for the observed fracture types. Although 3D-printed provisional restorations showed a shorter operating time, overall patients' satisfaction was not affected.

Essential oil of Piper hispidum (Piperaceae) has efficacy against monogeneans, and effects on hematology and gill histology of Colossoma macropomum.

This study investigated for the first time the effectiveness of therapeutic baths with essential oil (EO) of Piper hispidum against monogeneans Anacanthorus spathulatus, Notozothecium janauachensis, Mymarothecium boegeri and Linguadactyloides brinkmanni from the gills of Colossoma macropomum, as well as the hematological and histological effects on this fish. In therapeutic baths, 100 mg/L of P. hispidum essential oil and two control groups (water from the culture tank and water from the culture tank with 70% alcohol) were exposed for 1 h/day, with intervals of 48 hours for 3 days, and three replicates each were used. Therapeutic baths with 100 mg/L of P. hispidum essential oil had an efficacy of 78.6% against monogeneans. The toxicity of this essential oil was low, since there were a few physiological and histopathological changes that did not compromise the functioning of the gills of the fish. Therefore, 100 mg/L of P. hispidum essential oil was effective for controlling monogeneans in C. macropomum, when short therapeutic baths were used without compromising the health of the exposed fish.

Incorporation of bioactive glass-ceramic into coconut oil for remineralization of incipient carious lesions.

This study evaluated the efficacy of incorporating different concentrations of bioactive glass-ceramic (Biosilicate) into coconut oil on the remineralizing potential and surface roughness of white spot lesions. Fragments (6 x 6 x 2mm) of bovine teeth were sectioned and initial microhardness (KHN) and surface roughness (Ra) readings were obtained. The samples were submitted to cariogenic challenge to form white spot lesions and were separated into six groups (n=13): 1) Artificial Saliva (AS); 2) Coconut Oil (CO); 3) CO+2% Biosilicate (CO+2%Bio); 4) CO+5% Biosilicate (CO+5%Bio); 5) 2% Biosilicate Suspension (2% Bio) and 6) 5% Biosilicate Suspension (5% Bio). The treatments for 1 cycle/day were: immersion into the treatments for 5 minutes, rinsing in distilled water, and storage in artificial saliva at 37ºC. After 14 days, KHN and Ra readings were taken. The surface roughness alteration ((Ra) was analyzed (Kruskal-Wallis, Dunn's post-test, p<0.05). CO+2%Bio had higher (p = 0.0013) (Ra followed by CO+5%Bio (p = 0.0244) than AS. The relative KHN and remineralization potential were analyzed (ANOVA, Tukey, p<0.05), and 5% Bio treatment presented a higher relative microhardness than all other groups (p>0.05). The remineralizing potential of all the treatments was similar (p > .05). When Biosilicate was added, the pH of the suspensions increased and the alkaline pH remained during the analysis. Biosilicate suspension is more efficient than the incorporation of particles into coconut oil at white spot lesion treatment. In addition to the benefits that coconut oil and Biosilicate present separately, their association can enhance the remineralizing potential of Biosilicate.

Long-term effect of firing protocols on surface roughness and flexural strength of lithium disilicate glass-ceramic.

This study evaluated the effect of different firing protocols on the surface roughness and flexural strength of CAD/CAM lithium disilicate glass-ceramic (LD) after aging methods. Forty-two LD bars of 16 x 4 x 2 mm (IPS e-max CAD, Ivoclar) were randomly separated into two groups according to firing protocols: Single firing-Staining, glazing, and crystallization in a single step; Multiple firings-Crystallization+First staining+Firing+Second staining+Firing+Glazing+Firing. After protocols, initial surface roughness readings were taken (Surfcorder SE1700, Kosakalab). Samples were then randomly separated into three groups (n=7) according to the aging methods they were submitted: Thermomechanical cycling (TMC, ER System, Erios, 1,200,000 cycles, 0.3 MPa, 2 Hz and 5°C/37°C/55°C, 30 s swell time); Simulated toothbrushing (STB, Pepsodent, MAVTEC, 73,000 cycles), and Control (no aging). Final surface roughness readings were done, and samples were submitted to a three-point bending test (OM100, Odeme Dental Research) and fractographic analysis by scanning electron microscopy (EVO-MA10, ZEISS). Data were analyzed (2-way ANOVA, (α=.05). There was no difference (p>.05) in the flexural strength between the firing protocols, regardless of the aging method. STB decreased the flexural strength of samples submitted to multiple firings, different from control (p<.05). Without aging (Control), before TMC, and after STB, LD had lower surface roughness when submitted to multiple firings than to single firing (p<.05). The firing protocols did not affect the flexural strength or the surface roughness of the lithium disilicate glass-ceramic, even after aging. However, toothbrushing negatively affected the flexural strength and smoothed the surface of the ceramic submitted to multiple firings.

Effect of artificial aging on mechanical and physical properties of CAD-CAM PMMA resins for occlusal splints.

PURPOSE: This study aimed to assess and compare the color stability, flexural strength (FS), and surface roughness of occlusal splints fabricated from heat-cured acrylic resin, milled polymethyl methacrylate (PMMA)-based resin, and 3D-printed (PMMA) based-resin. MATERIALS AND METHODS: Samples of each type of resin were obtained, and baseline measurements of color and surface roughness were recorded. The specimens were divided into three groups (n = 10) and subjected to distinct aging protocols: thermomechanical cycling (TMC), simulated brushing (SB), and control (without aging). Final assessments of color and surface roughness and three-point bending test (ODM100; Odeme) were conducted, and data were statistically analyzed (2-way ANOVA, Tukey, P <.05). RESULTS: Across all resin types, the most significant increase in surface roughness (Ra) was observed after TMC (P < .05), with the 3D-printed resin exhibiting the lowest Ra (P < .05). After brushing, milled resin displayed the highest Ra (P < .05) and greater color alteration (ΔE00) compared to 3D-printed resin. The most substantial ΔE00 was recorded after brushing for all resins, except for heat-cured resin subjected to TMC. Regardless of aging, milled resin exhibited the highest FS (P < .05), except when compared to 3D-printed resin subjected to TMC. Heat-cured resin exposed to TMC demonstrated the lowest FS, different (P < .05) from the control. Under control conditions, milled resin exhibited the highest FS, different (P < .05) from the brushed group. 3D-printed resin subjected to TMC displayed the highest FS (P < .05). CONCLUSION: Among the tested resins, 3D-printed resin demonstrated superior longevity, characterized by minimal surface roughness and color alterations. Aging had a negligible impact on its mechanical properties.