Selenium inorganic speciation in beers using MSFIA-HG-AFS system after multivariate optimization.

In this work, the use of a multisyringe flow injection analysis coupled to hydride generation atomic fluorescence spectrometry (MSFIA-HG-AFS) for inorganic selenium chemical speciation was proposed. A Doehlert design was applied to optimize the experimental conditions for hydride generation (NaBH4 and HCl concentrations). The limits of quantification (LoQ) obtained were 0.07 µg L-1, for total inorganic Se, and 0.08 µg L-1, for Se(IV). Accuracy and precision of the proposed analytical method were evaluated through analysis of standard reference material and addition and recovery tests. The optimized method was applied to analyses of eight samples of beer, produced in Spain, obtaining concentrations for Se(IV) (<0.08 - 0.46 ± 0.01 µg L-1), total inorganic Se (0.47 ± 0.01 - 3.04 ± 0.62 µg L-1) and Se(VI) (0.06 ± 0.01 - 3.00 ± 0.59 µg L-1). The proposed analytical method was accurate, precise and sensitivity for determination of selenium species in beer samples.

Speciation analysis of inorganic As and Sb in urban dust using slurry sampling and detection by fast sequential hydride generation atomic absorption spectrometry.

In this work, a methodology for chemical speciation analysis of inorganic As and Sb in urban dust using slurry sampling and detection by fast sequential hydride generation atomic absorption spectrometry is proposed. Doehlert design and desirability function were used to find the optimum conditions for hydride generation (1.0 mol L-1 HCl and 0.9% m v-1 NaBH4). The accuracy of the analytical method was evaluated by analysis of reference material fly ash (BCR 176R), addition and recovery tests for inorganic As species, and comparison of independent methods for Sb determination in urban dust samples. The determination of the total concentrations of As and Sb and their inorganic species presented good accuracy, between 80 ± 1 and 101 ± 6%. Precision was expressed as the relative standard deviation and was better than 4.7% (n = 3). The limit-of-quantification values were 0.23 and 1.03 mg kg-1 for As and Sb, respectively. The methodology was applied to eight samples of dust collected in an urban area of Salvador and Jaguaquara cities, Bahia, Northeast, Brazil, with an aerodynamic size lower than 38 µm. Concentrations of pentavalent inorganic species (iAs5+ and iSb5+) in relation to trivalent species (iAs3+ and iSb3+) were found in urban dust collected in the city of Salvador, which are regarded as more toxic for both elements. The enrichment factor and geoaccumulation index (Igeo) values showed that for some samples, the concentrations of iAs and iSb presented strong enrichment and, and regarding environment, strong to moderately polluted by iAs and iSb, with an indication of anthropogenic contributions. The occurrence of these inorganic constituents in the urban area of Salvador can be related with intense industrial activities and vehicular traffic.

Optimization of sample preparation procedures for evaluation of the mineral composition of fish feeds using ICP-based methods.

This work describes the application of an experimental design in optimizing the decomposition and spectrometer operational conditions for analysis of fish feeds. The content of 22 elements (six macroelements, four microelements and eleven trace elements) in feeds for fishes (ornamental and for human consumption) was determined by inductively coupled plasma (ICP)-based methods. Limits of quantification were obtained and the values ranged between 0.02 mg kg-1 (Cd) and 76 mg kg-1 (Al). Evaluation of the methods was achieved through analysis of standard reference material, Oyster Tissue (NIST 1566b) and Tea (NCS DC 73351). Element concentrations in feed samples for ornamental fish ranged from <0.02 mg kg-1 (Cd) to 2.79% (P) and for fish breeding for human consumption from <0.02 mg kg-1 (Cd) to 2.00% (Ca). The concentrations of the elements obtained in the analyzed fish feeds were within the limits established by Brazilian and American legislation for regulated elements.

Determination of Zn in Dry Feeds for Cats and Dogs by Energy-Dispersive X-Ray Fluorescence Spectrometry.

This work describes an analytical method for Zn determination in dry feeds for cats and dogs by energy-dispersive X-ray fluorescence (EDXRF). Samples of dry feed were powdered and prepared in the form of pellets for direct analysis by EDXRF. The LOQ (10σ) was 0.4 mg/kg. The samples were also analyzed by inductively coupled plasma-optical emission spectrometry (ICP-OES) as an independent comparative method. Application of a paired t-test showed no significant differences between Zn concentrations obtained by EDXRF and ICP-OES (at a 95% confidence level). Analysis of variance was also applied to the results and revealed no significant differences between the two techniques (at a 95% confidence level). The precision, expressed as the RSD (n = 3), was RSD < 4.55%. This analytical method provides a simple, rapid, accurate, and precise determination of Zn in dry feeds for cats and dogs by EDXRF as direct, solid-sample analysis.