Effect of the calcium silicate and sodium phosphate remineralizing products on bleached enamel.

Context and Aims: This study evaluated the effect of calcium silicate and sodium phosphate (CSSP) dentifrice and serum on the surface of enamel bleached with hydrogen peroxide (H2O2). Materials and Methods: A total of 160 bovine enamel slabs were bleached with 35% H2O2 and treated with sodium fluoride (NaF) dentifrice-GI, CSSP dentifrice-GII; CSSP dentifrice + CSSP serum-GIII, or NaF dentifrice + NaF gel-GIV. The dentifrices were applied using a brushing machine three times daily for 7 days. After brushing, sodium phosphate gel and CSSP serum were applied. The microhardness (KNH, n = 14), surface roughness (Ra, n = 14), energy dispersive spectroscopy (n = 6), and scanning electron microscopy (n = 6) were assessed at t0 (before bleaching), t1 (after bleaching), and t2 (after postbleaching treatments). Statistical Analysis Used: The data were subjected to a two-way analysis of variance and Bonferroni's test. Results: The KNH decreased at t1 (P < 0.001) but recovered at t2 for all treatments, although only GII showed restored baseline values (P = 0.0109). The surface roughness increased at t1 (P < 0.001) and reduced at t2 (P < 0.001) for all groups, with no significant differences among groups. Enamel composition and morphology did not differ after the treatments, except for silicon accumulation in GIII. Conclusions: Postbleaching treatment with CSSP dentifrice and serum yielded superior remineralizing effects on bleached enamel.

Morphological characteristics of non-carious cervical lesions. A systematic review.

OBJECTIVES: This systematic review assessed the morphological characteristics of non-carious cervical lesions (NCCL), among clinical and ex-vivo studies assessed by observational and imaging methods. DESIGN: The search strategy was conducted on four online databases (MEDLINE, Embase, Scopus and Web of Science) and grey literature (Google Scholar and OpenGrey). The study selection was performed by three reviewers from March to September (2023). The eligibility criteria were established according to the PICO strategy and included NCCL, morphological characteristics and clinical and ex-vivo study designs. The data extraction considered general data that identifies the study, evaluation method, parameter to assess the outcome and the main results for each study. The risk of bias was evaluated using Joanna Briggs Institute critical appraisal tool, and a personalized tool. RESULTS: The search resulted in 252 studies. A total of 14 studies were included. Prevalence of NCCLs ranged from 3.5 %to 77.78 % with a higher presence in premolars. Common characteristics were wear facets, occluded tubules or cracks, occlusal stress, scratch marks, dimples and craters, structure loss, and dentin sclerosis, which appear more often on buccal surface and were generally classified as wedge-shaped, saucer-shaped. Etiological hypothesis was mainly related to multifactorial factors. In most of the studies, the risk of bias was classified as high. CONCLUSIONS: The morphological characteristics of NCCL showed a wide range of descriptions regarding appearance, prevalence, lesion-related measures, and macro and microscopic descriptions.

Efficiency of the photodynamic therapy on viability of Streptococcus mutans in the oral cavity using chitosan nanoparticles: an in vitro study.

PURPOSE: This study aimed to investigate the efficiency of antimicrobial photodynamic therapy (aPDT) on Streptococcus mutans biofilm in the oral cavity using the photosensitizer chloroaluminum phthalocyanine encapsulated in chitosan nanoparticles (ClAlPc/Ch) at three preirradiation times. METHODS: Biofilms of Streptococcus mutans strains (ATCC 25,175) were cultivated on bovine tooth blocks and exposed to a 10% sucrose solution three times a day for 1 min over three consecutive days. The samples were randomly distributed into five treatment groups (n = 5): (I) aPDT with ClAlPc/Ch with a preirradiation time of 5 min (F5), (II) aPDT with ClAlPc/Ch with a preirradiation time of 15 min (F15), (III) aPDT with ClAlPc/Ch with a preirradiation time of 30 min (F30), (IV) 0.12% chlorhexidine digluconate (CHX), and (V) 0.9% saline solution (NaCl). After treatment, the S. mutans biofilms formed on each specimen were collected to determine the number of viable bacteria (colony-forming units (CFU)/mL). Data were analyzed for normality using the Shapiro-Wilk test and the analysis of variance (ANOVA) and Tukey HSD tests to analyze the number of viable bacteria (α = 0.05). RESULTS: The one-way ANOVA showed a difference between the groups (p = 0.0003), and the Tukey HSD posttest showed that CHX had the highest microbial reduction of S. mutans, not statistically different from the F5 and F15 groups, whereas the NaCl group had the lowest microbial reduction statistically similar to the F30 group. CONCLUSION: The results demonstrate that aPDT mediated by ClAlPc/Ch when used at preirradiation times of 5-15 min can be an effective approach in controlling cariogenic biofilm of S. mutans, being an alternative to 0.12% CHX.

A Fluorescence-based Method to Reaccess Root Canals in Endodontically Treated Teeth: A Micro-Computed Tomography Tridimensional Assessment.

INTRODUCTION: The aim of this study was to evaluate the volume of dentin removal and the volume of remnants of restorative material after the removal of an esthetic restorative coronal set and cervical barrier in endodontically treated mandibular molars with the aid of different magnification methods using 3-dimensional (3D) micro-computed tomographic (micro-CT) morphometric analysis. METHODS: A sample of 30 mandibular first molars (N = 30) was used. All teeth were endodontically treated, and the specimens were initially scanned using micro-CT imaging and reconstructed. The molars were filled by a single-cone technique, and immediately the material at the initial 2-mm cervical level was removed. Cervical barriers were confected using ionomer glass cement with fluorescein 0.1%, filling the 2 mm at the cervical level of the canals and an additional 2 mm as the base. The coronal restoration set was performed using esthetic resin composites. A simulated tooth aging process was performed with 20,000 thermocycling cycles. The sample was distributed into the following 3 groups (n = 10) for the removal of the restoration set and cervical barrier with diamond burs based on the magnification aid: no magnification aid (naked eye), operative microscope aid, and REVEAL device (Design for Vision Inc, Bohemia, NY) aid. After removal, the final 3D micro-CT scanning and reconstruction were conducted with the same parameters as the initial scanning, and superposition of the final and initial scanning was performed. Morphometric analysis was conducted using CTAn software (Bruker microCT, Kontich, Belgium) to assess the volume of remnant restorative material (mm³), the volume of dentin removal (mm³), and the direction and site of dentin removal. Data were analyzed using 1-Way analysis of variance (P < .05). RESULTS: The REVEAL group showed better results regarding the volume of remnant material (3.17 ± 1.65) and the percentage of dentin removal (2.56 ± 1.34). The microscope group showed no statistical difference compared with the REVEAL group regarding dentin removal (3.30 ± 1.48) and was statistically similar to the naked eye group in the volume of remnant material (9.63 ± 4.33). The naked eye group showed the worst results for the volume of remnant material (7.60 ± 2.68) and the percentage of dentin removal (6.60 ± 3.70). CONCLUSIONS: The use of fluorescence associated with magnification was the method that presented the best results, with lower percentages of dentin removal and smaller volumes of remaining restorative material. This is an innovative technology in endodontics that shows potential to overcome the challenge of reaccessing root canals in the context of endodontic retreatment.

Longevity of composite restorations in posterior teeth placed by dental students: a 12-year retrospective study.

OBJECTIVES: To evaluate the longevity of resin composite restorations placed in posterior teeth by dental students, using data from electronic records from 2008 to 2019. MATERIALS AND METHODS: Demographic (gender and age) and clinical variables (dental group, position in dental arch, and the number of restored surfaces) were evaluated. The 5-year follow-up was assessed according to the day the restoration was placed. Kaplan-Meier curves were generated to calculate the annual failure rate. Data were analyzed by Chi-Square, Kruskal-Wallis, and Mann-Whitney tests (α = 0.05). RESULTS: In total, 3.883 records relative to return periodicity were analyzed. The final sample consisted of 900 restorations from 479 patients. The majority were females, aged between 31 and 60. In total, 256 failures were reported (success rate = 78%), showing an annual failure rate of 2.05%. The main reasons for failures were restoration replacement (55.5%), endodontics (21.9%), prosthetics (14.5%) and extraction (8.2%). There was a higher risk of failure in restorations involving three or more surfaces (p = 0.000) and in patients over 60 years (p < 0.001). In females (p = 0.030), molars (p = 0.044), and maxillary teeth (p = 0.038) failed in a shorter time. CONCLUSIONS: Resin composite restorations placed in permanent posterior teeth by dental students had high survival rates. The main reason for failure was the replacement of restorations. The age group and the number of restored surfaces significantly affected the success of the restorations. CLINICAL RELEVANCE: The electronic health records over 12 years showed that 78% of the resin restorations in posterior teeth placed by dental students were successful for a minimum of five years.

Pomegranate extract on eroded dentin: antioxidant action, bond strength and morphology of the adhesive interface after aging.

Objectives: This study aimed to evaluate the effect of pomegranate solution (Punica granatum) on eroded dentin through antioxidant action, shear bond strength (SBS) and interface morphology. Materials and Methods: The 10% pomegranate peel extract was prepared by the lyophilization method. Punicalagin polyphenol was confirmed by high-performance liquid chromatography. Antioxidant activity was evaluated by capturing the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical. For the SBS, 48 dentin fragments were divided into sound or eroded, and subdivided according to the pretreatment (n = 12): water or P. granatum. The surfaces were restored with self-etch adhesive and a bulk-fill resin (Ecosite; DMG). The SBS was done immediately (24 hours) and after thermal cycling + water storage (12 months). For scanning electron microscopy, 48 dentin fragments (24 sound and 24 eroded) received the same treatments as for SBS (n = 6), and they were analyzed after 24 hours and 12 months. Results: The P. granatum had antioxidant action similar (p = 0.246) to the phenolic standard antioxidants. After 24 hours, eroded dentin had lower SBS than sound dentin (p < 0.001), regardless of the pretreatment. After 12 months, P. granatum maintained the SBS of sound dentin (13.46 ± 3.42 MPa) and eroded dentin (10.96 ± 1.90 MPa) statistically similar. The lowest values were found on eroded dentin treated with water (5.75 ± 1.65 MPa) (p < 0.001). P. granatum on eroded dentin caused peritubular demineralization and hybrid layer with resin tags. Conclusions: The pomegranate extract had antioxidant action and preserved the adhesive interface of the eroded dentin.

Physicochemical and mechanical properties of preheated composite resins for luting ceramic laminates.

This study analyzed and compared the physicochemical and mechanical properties of preheated resin composite with light-cured resin cement for luting indirect restorations. 210 specimens of resin cement/resin composite were prepared according to preheating treatment heated (Htd) or not (NHtd). Light-cured resin cement (Variolink Veneer, Ivoclar), and resin composite (Microhybrid-Z100, 3 M; Nanohybrid-Empress direct, Ivoclar; and Bulk fill-Filtek One, 3 M) were used (n = 10). Resin cement specimens were not preheated. The response variables were (n = 10): film thickness, microhardness, liquid sorption and solubility. Data were analyzed by 2-way ANOVA and Tukey HSD post-test (α = 0.05). Bulk fill NHtd resin had the highest film thickness values (p < 0.001). Microhybrid and nanohybrid Htd resins had the smallest thicknesses and did not differ from the cement (p > 0.05). The highest microhardness values were found for Bulk fill NHtd and Bulk fill Htd resins. The nanohybrid and microhybrid Htd resins showed the lowest microhardness values, with no difference in cement (p > 0.05). For liquid sorption, there was no significant difference between the groups (p = 0.1941). The microhybrid Htd resin showed higher solubility values than the other materials (p = 0.0023), but it did not differ statistically from resin cement (p > 0.05). Preheating composite resins reduced the film thickness. After heating, nanohybrid and Bulk fill resins retained stable microhardness, sorption, and solubility values.

Impact of access cavities on root canal preparation, restorative protocol quality, and fracture resistance of teeth.

The survival of endodontically treated teeth depends on the remaining tooth structure. The aim of this study was to evaluate the impact of different access cavities on root canal preparation, restorative protocol, and fracture resistance of endodontically treated teeth. Fifty-six mandibular molars were divided into control (n=8) and experimental (n=16) groups according to access cavity: Traditional, Conservative, and Truss; and redistributed (n=8) according to instrumentation protocols: Reciproc Blue and R-motion. After, teeth were scanned in micro-CT and then filled and redistributed according to composite resin restoration (n=8): Filtek One BulkFill and Filtek Z350. A new micro-CT scan was performed to analyze the restorative material. Then, samples were submitted to fracture resistance testing and the failure pattern was determined. Data were analyzed using paired T-test, ANOVA, Tukey, and chi-square tests (α=0.05). In Truss, R-Motion promoted less transportation in different thirds of root canals. Higher percentages of voids (5.05%) and filling material (11.7%) were observed in Truss. Fracture resistance values were higher for the control group, followed by Truss, Conservative, and Traditional. The predominant failure pattern was type-II. In Truss, reciprocating instruments with smaller taper showed less canal transportation. Also, Truss provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material. Thus, in Truss, reciprocating files with smaller taper showed less canal transportation, and these cavities provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material.

Er:YAG laser in selective caries removal and dentin treatment with chitosan: a randomized clinical trial in primary molars.

This study evaluated the effect of chitosan on dentin treatment after selective removal of caries lesions with Er:YAG laser in reducing Streptococcus mutans, as well as its effect on the performed restorations. The sample consisted of children (aged 7 to 9 years) with active carious lesions and dentin cavitation located on the occlusal surface of deciduous molars. Eighty teeth were randomly distributed into 4 groups according to the caries removal method: Er:YAG laser (250 mJ/4 Hz) or bur and dentin surface treatment: 2.5% chitosan solution or distilled water. The bacterial load of caries-affected dentin was quantified by counting CFU/mg (n = 10). The teeth were restored and evaluated at 7 days, 6 months, and 12 months using modified USPHS criteria (n = 20). Microbiological data was analyzed by Mann-Whitney and clinical analyses were done using Kruskal-Wallis and Dunn test (α = 0.05). The results showed that the Er:YAG laser significantly reduced the amount of Streptococcus mutans (p = 0.0068). After dentin treatment with chitosan, there was a significant reduction in the amount of Streptococcus mutans for both removal methods (p = 0.0424). For the retention and secondary caries criteria, no significant differences were observed along the evaluated time (p > 0.05). The laser-treated group was rated "bravo" for discoloration (p = 0.0089) and marginal adaptation (p = 0.0003) after 6 and 12 months compared to baseline. The Er:YAG laser reduced the amount of Streptococcus mutans and the chitosan showed an additional antibacterial effect. After 1 year, the Er:YAG laser-prepared teeth, regardless of the dentin treatment, showed greater discoloration and marginal adaptation of the restorations.

Antibiofilm and antimicrobial activity of temporary filling materials on root canals: an in situ acid challenge.

The present study evaluated the antibiofilm and antimicrobial effects of temporary restorative materials on root canals after an intra-oral challenge. Seventy roots were endodontically treated and divided into 5 groups: high-viscosity glass ionomer (HV-GIC), light-activated glass ionomer (RM-GIC), zinc-oxide cement without eugenol (ZO), zinc-oxide cement with eugenol (ZOE), and unsealed roots (negative control). For 28 days, 14 participants used intra-oral devices with five roots, and drops of sucrose were applied onto them. The amount of biofilm and the bacterial counts were analyzed by Kruskal-Wallis and Dunn, and by two-way ANOVA and Tukey (α = 0.05). HV-GIC and RM-GIC better inhibit biofilm, followed by ZO and ZOE. Unsealed roots had the largest biofilm accumulation (p = 0.002) and higher bacterial penetration than restored roots (p = 0.023). A low amount of Streptococcus was found in RM-GIC and ZOE-restored roots without difference from HV-GIC (p = 0.021). The low amount of Enterococcus (p = 0.003) was found in the ZOE-restored roots, without difference from GICs.

Patients´ satisfaction concerning direct anterior dental restoration.

The objective of this study was to observe patients' satisfaction with their in-service direct anterior dental restorations and to compare it with clinical evaluation using FDI (Federation Dental International) criteria. Patients scored their own anterior dental restorations regarding satisfaction (satisfactory /dissatisfactory). If dissatisfaction was mentioned, then, they would be interviewed about the complaint. In the same session, the dental restorations were clinically evaluated by two dentists using FDI criteria (1-5 score) concerning esthetic, functional, and biological domains. Descriptive statistics were used for frequencies of scores attributed by patients and clinicians. In order to compare patients' to clinicians' frequencies, the Chi-square test was applied (p ≤ 0.05). A total of 106 restorations were evaluated by patients and clinicians. Patients reported 52.8% of restorations satisfactory and 47.8% dissatisfactory. Overall, clinicians reported the same restorations as 82,3% satisfactory and 17,6% dissatisfactory. Patients' most frequent complaints referred to color, followed by anatomical form, fracture of material and retention, and approximal anatomical form. Comparing patients' satisfaction and dissatisfaction rates to clinicians' evaluation per criteria, there was no difference regarding esthetics. The frequency of dissatisfactory restorations by clinicians was significantly lower when functional and biological properties were compared with patients' opinions. Direct anterior dental restorations were more frequently reported as satisfactory by patients and clinicians, being the main complaints related to esthetic issues. When clinicians and patients' evaluations were compared, it was observed that the frequencies of satisfactory restoration by patients and clinicians were similar regarding esthetic properties, and significantly different regarding functional and biological properties.

Canal Drying Protocols to Use with Calcium Silicate-based Sealer: Effect on Bond Strength and Adhesive Interface.

INTRODUCTION: The aim of this study was to evaluate the influence on bond strength and interface quality of different canal drying protocols in roots filled with Bio-C Sealer (BCS; Angelus, Londrina, Paraná, Brazil). METHODS: Ninety-six roots of upper canines were prepared with an R50 file (Reciproc; VDW GmbH, Munich, Germany) and irrigated with 2.5% sodium hypochlorite and 17% EDTA under ultrasonic agitation. Roots were divided according to the drying protocol as follows: dry, the White Mac tip (Ultradent, Indaiatuba, SP, Brazil) for 5 seconds followed by aspiration with a capillary tip for 5 seconds and paper points; slightly moist, the White Mac tip followed by capillary aspiration without paper points; wet, the White Mac tip followed by a single paper point. The roots were filled with BCS or AH Plus (AHP; Dentsply Maillefer, Ballaigues, Switzerland) (n = 16) and sectioned for the push-out test after 3 months. Failure modes were assessed, and the interface morphology was analyzed under scanning electron microscopy. After 6 months, the other half of the roots were evaluated. Data were analyzed by analysis of variance/Tukey test at 5%. The chi-square test was used in the failure analysis and the Kruskal-Wallis/Dwass-Steel-Critchlow-Fligner for interface analysis. RESULTS: The AHP-filled roots had the highest bond strength when the canal was dried (P < .05). No difference was found for periods (P > .05). For BCS, the highest bond strength was found in the slightly moist canals (P < .05). A predominance of adhesive failures was observed. The dried canals filled with AHP had the highest percentage of good adaptation, whereas BCS had no difference. CONCLUSIONS: The best drying protocol for AHP is using the White Mac tip followed by capillary tip aspiration and paper points until complete dryness, and for BCS, it is using the White Mac tip followed by capillary aspiration without paper points.

Epigallocatechin-3-gallate prior to composite resin in abfraction lesions: a split-mouth randomized clinical trial.

Objectives: Natural extracts have been investigated as a biomimetic strategy to mechanically strengthen the collagen network and control the biodegradation of extracellular matrix. This study evaluated the effect of epigallocatechin-3-gallate (EGCG) on abfraction lesions prior to the composite resin. Materials and Methods: The sample consisted of 30 patients (aged between 28 and 60 years) with abfraction lesions located in 2 homologous premolars. The teeth were randomly assigned according to dentin treatment: 0.02% EGCG solution or distilled water (control). After enamel acid etching, the solutions were applied immediately for 1 minute. The teeth were restored with Universal Adhesive (3M) and Filtek Z350 XT (3M). Analyzes were done by 2 independent examiners using modified USPHS (retention, secondary caries, marginal adaptation, and postoperative sensitivity) and photographic (color, marginal pigmentation, and anatomical form) criteria at baseline (7 days) and final (18 months). The data analysis used Friedman and Wilcoxon signed-rank tests (α = 0.05). Results: At baseline, all restorations were evaluated as alpha for all criteria. After 18 months, restorations were evaluated as alpha for secondary caries, color, and marginal pigmentation. There was significant difference between baseline and 18 months (p = 0.009) for marginal adaptation and postoperative sensitivity (p = 0.029), but no significant difference were verified between treatments (p = 0.433). The EGCG group had a restoration retention rate of 93.3%, while the control group had 96.7%. Conclusions: The application of EGCG solution on abfraction lesions did not significantly influence the survival of the restorations based on clinical and photographic criteria.

Patients´ satisfaction concerning direct anterior dental restoration

Abstract The objective of this study was to observe patients' satisfaction with their in-service direct anterior dental restorations and to compare it with clinical evaluation using FDI (Federation Dental International) criteria. Patients scored their own anterior dental restorations regarding satisfaction (satisfactory /dissatisfactory). If dissatisfaction was mentioned, then, they would be interviewed about the complaint. In the same session, the dental restorations were clinically evaluated by two dentists using FDI criteria (1-5 score) concerning esthetic, functional, and biological domains. Descriptive statistics were used for frequencies of scores attributed by patients and clinicians. In order to compare patients' to clinicians' frequencies, the Chi-square test was applied (p ≤ 0.05). A total of 106 restorations were evaluated by patients and clinicians. Patients reported 52.8% of restorations satisfactory and 47.8% dissatisfactory. Overall, clinicians reported the same restorations as 82,3% satisfactory and 17,6% dissatisfactory. Patients' most frequent complaints referred to color, followed by anatomical form, fracture of material and retention, and approximal anatomical form. Comparing patients' satisfaction and dissatisfaction rates to clinicians' evaluation per criteria, there was no difference regarding esthetics. The frequency of dissatisfactory restorations by clinicians was significantly lower when functional and biological properties were compared with patients' opinions. Direct anterior dental restorations were more frequently reported as satisfactory by patients and clinicians, being the main complaints related to esthetic issues. When clinicians and patients' evaluations were compared, it was observed that the frequencies of satisfactory restoration by patients and clinicians were similar regarding esthetic properties, and significantly different regarding functional and biological properties.

Resumo O objetivo deste estudo foi observar a satisfação dos pacientes com suas restaurações dentárias anteriores diretas e compará-las com a avaliação clínica do dentista usando os critérios FDI (Federation Dental International). Os pacientes pontuaram suas restaurações dentárias (n=106) anteriores em relação à satisfação (satisfatória / insatisfatória). Quando insatisfatória, ele foi entrevistado sobre a queixa. Na mesma sessão, as restaurações dentárias foram avaliadas clinicamente por dois dentistas utilizando os critérios FDI (escore 1-5) quanto aos aspectos estéticos, funcionais e biológicos. Estatística descritiva foi usada para frequências de escores atribuídos por pacientes e clínicos. Para comparar as frequências dos pacientes e dos clínicos, foi aplicado o teste Qui-quadrado (p ≤ 0,05). Os pacientes relataram suas restaurações como 52,8% satisfatórias e 47,8% insatisfatórias. Os clínicos reportaram as mesmas restaurações, 82,3% satisfatória e 17,6% insatisfatória. As queixas mais frequentes dos pacientes referiam-se à cor, seguida da forma anatômica, fratura e retenção do material e forma anatômica proximal. Comparando os índices de satisfação e insatisfação dos pacientes com os clínicos, não houve diferença em relação à estética. A frequência de restaurações insatisfatórias por dentistas foi significativamente menor quando as propriedades funcionais e biológicas foram comparadas com as opiniões dos pacientes. As restaurações foram mais frequentemente relatadas como satisfatórias pelos pacientes, sendo as principais queixas relacionadas a questões estéticas. Quando as avaliações dos clínicos e dos pacientes foram comparadas, observou-se que as frequências de restaurações satisfatórias por pacientes e clínicos foram semelhantes em relação às propriedades estéticas e significativamente diferentes em relação às propriedades funcionais e biológicas.

Evaluation of the push-out bond strength of an adjustable fiberglass post system to an endodontically treated oval root canal.

To evaluate the push-out bond strength of the adjustable fiberglass post system to dentin. Twenty maxillary canine roots were endodontically treated and divided into two groups (n=10): conventional fiberglass posts (CFPs) and with single adjustable post (SAP) system. Two slices of each third were subjected to the push-out and failure pattern test and the most apical slice was subjected to analysis of the adhesive interface by scanning electron microscopy (SEM). Data were analyzed by the three-way analysis of variance, Tukey, and Friedman tests, and linear regression (α=0.05). The results showed higher push-out bond strength in the initial time interval for SAP (10.3±5.3, p<0.01). After 6 months, there was reduction in push-out bond strength for both (p<0.001). A higher percentage of adhesive and cohesive failures to dentin. After 6 months areas of maladaptation were noted (p=0.000). The SAP is completed to the promissory root canal in relation to alternative CFP.

Cone-beam computed tomographic evaluation of the root canal anatomy of the lower premolars and molars in a Brazilian sub-population.

Purpose: This study evaluated anatomical variations in the root canals of the lower premolars and molars in a Brazilian sub-population using cone-beam computed tomography (CBCT). Materials and Methods: In total, 121 CBCT images of patients were selected from a database. All images contained lower first and second premolars and molars on both sides of the arch, fully developed roots, and no treatment, resorption, or calcifications. In each image, the root canals of the lower premolars and molars were evaluated according to the Vertucci classification in On-Demand 3D software in the multiplanar reconstruction with dynamic navigation. Twenty-five percent of the images were re-assessed to analyze intraobserver confidence with the kappa test. Data were statistically evaluated with linear regression to evaluate the correlations of anatomic variations with age and sex, and the Wilcoxon test to analyze the laterality of variations, with a significance level of 5%. Results: The intraobserver agreement (0.94) was excellent. In general, the root canals of lower premolars and molars showed a higher prevalence of type I than other Vertucci classification types, followed by type V in premolars and type II in molars. When the molar roots were evaluated separately, type II was more frequent in mesial roots and type I in distal roots. Although age showed no correlations with the results, sex and laterality showed correlations with tooth 45 and the lower second premolars, respectively. Conclusion: The lower premolars and molars of a Brazilian sub-population showed a wide range of root canal anatomic variations.

Bond strength of composite resin/universal adhesive to dentin submitted to radiotherapy / Fuerza de unión de resina compuesta/adhesivo universal a dentina sometida a radioterapia

Aim: To evaluate the bond strength of a universal adhesive system to dentin submitted to radiotherapy. Materials and Methods: Sixty extracted human teeth were divided into two groups (n = 30): without radiotherapy (control); with radiotherapy, according to the adhesive protocol (n=15): ER-etch-and-rinse (acid + Single Bond Uni-versal); SE-self-etch (Single Bond Universal). The analyzes were shear bond strength (SBS) (n=10), failure pattern (n=10) and scanning electron microscopy (n=5). Data was analyzed by a two-way ANOVA (α =0.05). Results: The radiotherapy decreased SBS of the restorative material to dentin (p<0.0001). The ER protocol provided lower bond strength values (p<0.001). The predominant type of fracture without radiotherapy was mixed (SE), cohesive to the material (ER). Both protocols presented adhesive failures with radiotherapy. Teeth had a hybrid layer and long resin tags (without radiotherapy) and few tags (with radiotherapy). Conclusions: The SE adhesive mode favors the shear bond strength of resin to dentin in teeth submitted to radiotherapy.

Objetivo: Evaluar la fuerza de adhesión de un sistema adhesivo universal a la dentina sometida a radioterapia. Materiales y Métodos: Sesenta dientes humanos extraídos se dividieron en dos grupos (n = 30): sin radioterapia (control); con radioterapia, según protocolo adhesivo (n=15): ER-grabado y enjuague (ácido + Single Bond Universal); autograbado SE (Single Bond Universal). Los análisis ejecutados fueron resistencia al cizallamiento (SBS) (n=10), patrón de falla (n=10) y microscopía electrónica de barrido (n=5). Los datos se sometieron al test de ANOVA de dos vías (α =0,05). Resultados: La radioterapia disminuyó la SBS del material restaurador a la dentina (p<0,0001). El protocolo ER proporcionó valores de fuerza de unión más bajos (p<0,001). El tipo de fractura predominante sin radioterapia fue mixta (SE), cohesiva al material (ER). Ambos protocolos presentaron fallas adhesivas con radioterapia. Los dientes tenían una capa híbrida y colas de resina largas (sin radioterapia) o pocas colas de resina (con radioterapia). Conclusión: El modo adhesivo SE favorece la resistencia al corte de la resina a la dentina en dientes sometidos a radioterapia.

Adjuvant therapy with a 980-nm diode laser in root canal retreatment: randomized clinical trial with 1-year follow-up.

The purpose of this study is to assess the laser effect in root canal disinfection and periapical healing of endodontically treated teeth from patients with asymptomatic apical periodontitis. This study was performed as a randomized clinical trial. Thirty patients were selected according to the inclusion/exclusion criteria. Fifteen patients received the root canal retreatment (RCR) combined with 980-nm diode laser irradiation (LI). The canals were irrigated with saline solution and gently dried with paper points, keeping the dentin partially moist. The irradiation was performed using a 320-µm-diameter fiber in helicoidal movements (pulsed mode, power output of 1.5 W, 100 Hz for 20 s). The other 15 patients received the RCR with placebo irradiation (PI). Microbiological samples were taken in three periods: S1, after the filling material removal (baseline); S2, after laser or placebo irradiation (LI or PI); and S3, after the RCR followed by laser or placebo. The samples were submitted to the total microbial and E. faecalis counting. The periapical radiographic healing was analyzed after 3, 6, 9, and 12 months. Microbiological data (CFU/mg) were analyzed by ANOVA and Tukey's test (P < 0.05), and the repair by Mann-Whitney test (P < 0.05). In S2, the laser provided 42.44% microbial reduction and 53.14% of E. faecalis, different from the placebo that had no reduction, and 4.85% for Enterococcus (P < 0.05). In S3, the bacterial counts decreased without differences between groups. No differences in healing were found at 3 months. However, diode laser facilitated the repair from 3- to 12-month follow-up (P < 0.05) and had 45% more healed cases than placebo. Diode laser provided an antimicrobial effect before the biomechanical preparation but was not synergistic in RCR. It improved the periapical healing during follow-up.

Guided endodontics of calcified canals: The drilling path of rotary systems and intracanal dentin wear.

This study evaluated the drilling path (mm) and the dentin wear (mm3 ) of two instruments used during guided endodontic access. Twenty mandibular incisors with calcified canals were selected using cone-beam computed tomography (CBCT) and fixed in articulated models. Preoperative CBCT scans were performed in combination with intraoral scanning, and the images were reconstructed in the Blue Sky Bio software for access planning and printing the guides. The access cavity was drilled with 1.0-mm-diameter bur (DSP) and 0.8-mm-diameter bur (Munce). Postoperative CBCT was performed, and the images obtained preoperative and postoperative were superimposed for the analyses. Data were analysed by a t-test and linear regression (α = 0.05). No difference was found in the drilling path (p = 0.422). However, the Munce bur had higher dentin wear than the DSP bur (p = 0.011). A positive linear correlation (R2  = 0.859) was found between the factors.