RESUMO
Using a wheelchair over uneven terrain generates vibrations of the human body. These vibrations result from mechanical energy impulses transferred from the ground through the wheelchair components to the user's body, which may negatively affect the quality of the wheelchair use and the user's health. This energy can be dissipated through the structure of the wheelchair frame, such as polymer and carbon fiber composites. This article aims to compare a wheelchair with an aluminum alloy frame and a carbon fiber frame in terms of reducing kinematic excitation acting on the user's body. Three wheelchairs were used in the study, one with an aluminum alloy frame (reference) and two innovative ones with composite frames. The user was sitting in the tested wheelchairs and had an accelerometer attached to their forehead. The vibrations were generated by applying impulses to the rear wheels of the wheelchair. The obtained results were analyzed and compared, especially regarding differences in the damping decrement. The research shows that using modern materials in the wheelchair frame has a beneficial effect on vibration damping. Although the frame structure and material did not significantly impact the reduction in the acceleration vector, the material and geometry had a beneficial effect on the short dissipation time of the mechanical energy generated by the kinematic excitation. Research has shown that modern construction materials, especially carbon fiber-reinforced composites, may be an alternative to traditional wheelchair suspension modules, effectively damping vibrations.
RESUMO
Nanotechnology is used, to an increasing extent, in practically every aspect of the economy and society. One area where nanotechnology is constantly advancing is fire protection. Nanostructures are found in elements used in direct protection, such as in protective clothing, filters, and helmets. Solutions in the field of nanotechnology are also used in elements reducing the fire risk and increasing the fire safety, such as building materials and structures, paints, coatings, or fire safety equipment (e.g., fire detectors). However, new solutions may also pose a threat to the safety of people and the environment. As a result of operation or combustion and degradation processes, the emission of nano-substances with toxic properties may occur. Therefore, knowledge in this field is necessary, as it allows for the appropriate targeting and use of nanotechnology.