Spray-deposition and photopolymerization of organic-inorganic thiol-ene resins for fabrication of superamphiphobic surfaces.

Superamphiphobic surfaces, exhibiting high contact angles and low contact angle hysteresis to both water and low surface tension liquids, have attracted a great deal attention in recent years because of the potential of these materials in practical applications such as liquid-resistant textiles, self-cleaning surfaces, and antifouling/anticorrosion coatings. In this work, we present a simple strategy for fabricating of superamphiphobic coatings based on photopolymerization of hybrid thiol-ene resins. Spray-deposition and UV photopolymerization of thiol-ene resins containing hydrophobic silica nanoparticles and perfluorinated thiols provide a multiscale topography and low-energy surface that endows the surface with superamphiphobicity. The wettability and chemical composition of the surfaces were characterized by contact-angle goniometry and X-ray photoelectron spectroscopy, respectively. The hierarchical roughness features of the thiol-ene surfaces were investigated with field-emission scanning electron microscopy. Droplet impact and sandpaper abrasion tests indicate the coatings respectively possess a robust antiwetting behavior and good mechanical durability.

Sequential thiol click reactions: formation of ternary thiourethane/thiol-ene networks with enhanced thermal and mechanical properties.

We report the physical properties of thiol-ene networks modified with thiourethane or urethane linkages, either along the main chain or as a branched component in the network, respectively. Because of the robust and orthogonal nature of thiol-isocyanate and thiol-ene reactions, these networks can be formed in a two-step, one-pot synthesis. Resultant networks were characterized using dynamic mechanical analysis, mechanical testing and other complementary techniques. It was found that incorporating (thio)urethanes into the networks increased Tg, but also increased strain at break and toughness while decreasing cross-link density. The changes in physical properties are discussed in terms of a proposed dual network morphology. These facile modifications to thiol-ene networks demonstrate how molecular-level, nanoscale changes can have a profound influence on the macroscale properties through hierarchical development of network morphology.

Superhydrophobic hybrid inorganic-organic thiol-ene surfaces fabricated via spray-deposition and photopolymerization.

We report a simple and versatile method for the fabrication of superhydrophobic inorganic-organic thiol-ene coatings via sequential spray-deposition and photopolymerization under ambient conditions. The coatings are obtained by spray-deposition of UV-curable hybrid inorganic-organic thiol-ene resins consisting of pentaerythritol tetra(3-mercaptopropionate) (PETMP), triallyl isocyanurate (TTT), 2,4,6,8-tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane (TMTVSi), and hydrophobic fumed silica nanoparticles. The spray-deposition process and nanoparticle agglomeration/dispersion provide surfaces with hierarchical morphologies exhibiting both micro- and nanoscale roughness. The wetting behavior, dependent on the concentration of TMTVSi and hydrophobic silica nanoparticles, can be varied over a broad range to ultimately provide coatings with high static water contact angles (>150°), low contact angle hysteresis, and low roll off angles (<5°). The cross-linked thiol-ene coatings are solvent resistant, stable at low and high pH, and maintain superhydrophobic wetting behavior after extended exposure to elevated temperatures. We demonstrate the versatility of the spray-deposition and UV-cure process on a variety of substrate surfaces including glass, paper, stone, and cotton fabric.

Synthesis of thiol-clickable and block copolypeptide brushes via nickel-mediated surface initiated polymerization of α-amino acid N-carboxyanhydrides (NCAs).

We describe the synthesis of homo-, block, and clickable copolypeptide brushes from low surface area substrates using nickel-mediated surface-initiated polymerization of α-amino N-carboxyanhydrides.