RESUMO
The European Commission (EC) has tasked the European Medicines Agency (EMA) to provide a recommendation towards the acceptability of titanium dioxide (TiO2) in pharmaceutical products by early 2024 to inform on final decision in early 2025[1]. Unlike the already implemented ban of TiO2 in foods, removing this excipient from pharmaceutical products will likely have significant impact on the pharmaceutical industry, regulatory agencies, and patients. This commentary explores the challenges facing the pharmaceutical industry tasked with supporting the development and registration of TiO2 free (TF) drug products. Specifically, justification of formulation changes and potential impact to in vitro and in vivo performance, as well as differences in global regulatory comparative dissolution requirements to justify changing to TF drug product are discussed. Particularly, the uncertainties around how a formulation change such as removal of TiO2 from immediate release solid oral dosage forms will be viewed in Europe compared to other regions is discussed. To respond to these challenges and avoid disruption to the medicines supply chain in case in vitro data such as dissolution is either too challenging or insufficient to justify changing to TF product, pharmaceutical companies may have to decide if the level of risk is worth the effort needed to reformulate, develop, and register a new TF product.
RESUMO
We report a novel utilization of a pH modifier as a disproportionation retardant in a tablet formulation. The drug molecule of interest has significant bioavailability challenges that require solubility enhancement. In addition to limited salt/cocrystal options, disproportionation of the potential salt(s) was identified as a substantial risk. Using a combination of Raman spectroscopy with chemometrics and quantitative X-ray diffraction in specially designed stress testing, we investigated the disproportionation phenomena. The learnings and insight drawn from crystallography drove the selection of the maleate form as the target API. Inspired by the fumarate form's unique stability and solubility characteristics, we used fumaric acid as the microenvironmental pH modulator. Proof-of-concept experiments with high-risk (HCl) and moderate-risk (maleate) scenarios confirmed the synergistic advantage of fumaric acid, which interacts with the freebase released by disproportionation to form a more soluble species. The resultant hemifumarate helps maintain the solubility at an elevated level. This work demonstrates an innovative technique to mediate the solubility drop during the "parachute" phase of drug absorption using compendial excipients, and this approach can potentially serve as an effective risk-mitigating strategy for salt disproportionation.
Assuntos
Química Farmacêutica , Composição de Medicamentos , Fumaratos , Solubilidade , Fumaratos/química , Concentração de Íons de Hidrogênio , Composição de Medicamentos/métodos , Química Farmacêutica/métodos , Análise Espectral Raman/métodos , Difração de Raios X/métodos , Comprimidos/química , Sais/química , Maleatos/química , Excipientes/química , Disponibilidade BiológicaRESUMO
Sofosbuvir (SOF) is a nucleotide prodrug which has been used as a backbone for the clinical treatment of hepatitis C viral infection. Because sofosbuvir undergoes complex first pass metabolism, including metabolic activation to form its pharmacologically active triphosphate (GS-331007-TP) to inhibit the viral RNA polymerase in the liver, it is difficult to project the human dose for clinical evaluation based on preclinical data. Selecting an appropriate animal model for drug exposure in the target tissue is challenging due to differences in absorption, stability, hepatic uptake, and intracellular activation across species. Efficient liver delivery has been established in human liver following administration in a clinical trial of patients receiving sofosbuvir prior to liver transplantation. Using the clinical liver exposure as a benchmark, we assessed and compared the pharmacokinetic profile in mouse, rat, hamster, dog and monkey. Liver accumulation was also assessed in the PXB mouse model in which the liver is mostly populated with human hepatocytes. At human equivalent dose, the hepatic concentrations of GS-331007-TP in dog and PXB mouse were comparable to those observed in the human livers. In these species, high and sustained levels of GS-331007-TP were observed in both primary hepatocytes in vitro and the liver in vivo.
Assuntos
Fígado/química , Fígado/metabolismo , Pró-Fármacos/metabolismo , Sofosbuvir/metabolismo , Animais , Cães , Humanos , Macaca fascicularis , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Conformação Molecular , Pró-Fármacos/química , Pró-Fármacos/farmacocinética , Ratos , Ratos Sprague-Dawley , Sofosbuvir/química , Sofosbuvir/farmacocinéticaRESUMO
Solid-state NMR (SSNMR) (1)H T1 and T1ρ relaxation times were used to evaluate the miscibility of amorphous solid dispersions of nifedipine (NIF) and polyvinylpyrrolidone (PVP) prepared by three different methods: melt quenching in the typical lab setting, spray drying and melt quenching in the NMR rotor while spinning. Of the five compositions prepared by melt quenching in the lab setting, the 95:5 and 90:10 NIF:PVP (w:w) amorphous solid dispersions were not miscible while 75:25, 60:40, and 50:50 NIF:PVP dispersions were miscible by the (1)H T1ρ measurements. The domain size of the miscible systems was estimated to be less than 4.5 nm. Amorphous solid dispersions with composition of 90:10 NIF:PVP prepared by spray drying and melt quenching in the NMR rotor showed miscibility by (1)H T1ρ values. Variable-temperature SSNMR (1)H T1ρ relaxation measurements revealed a change in relaxation time at approximately 20 °C below Tg, suggesting increased molecular mobility above that temperature.
Assuntos
Excipientes/química , Espectroscopia de Ressonância Magnética , Nifedipino/química , Povidona/química , Varredura Diferencial de Calorimetria , Substitutos do Plasma/química , Solubilidade , Temperatura , Vasodilatadores/químicaRESUMO
Polysaccharide-based excipients comprise the majority of most solid dosage forms and can vary dramatically in terms of structural and functionally related properties. Analytical methods for characterizing these important formulation components are crucial. Solid-state NMR spectroscopy (SSNMR) can provide a wealth of information on these materials while offering the advantages of non-destructive sample preparation and selectivity. The overall objective of this work is to identify SSNMR parameters that can be used to detect differences among these excipients. Excipients were obtained from a wide range of suppliers and analyzed as received; (13)C SSNMR spectra were acquired using a Chemagnetics CMX-300 spectrometer operating at approximately 75 MHz. The resolution of SSNMR signals of many excipients allows for positive identification of the major form present. Alginic acid and sodium alginate can be differentiated based on carbonyl peak position. Analysis of relative peak intensities provides insight into the purity of a carrageenan sample compared to known standards. The SSNMR spectrum of starch can be used to identify the source and to quantitate the amorphous and crystalline content. Relaxation values and peak areas of starch derivatives can be related to the degree of hydrolysis, providing an alternative method for determining dextrose equivalent. Differences in peak intensities and relaxation time values of HPMC samples can be correlated to the amount of methoxy subsituent groups. Important characteristics of excipients such as form identification, structural differences, crystalline and amorphous content, and water content variations can be detected using SSNMR spectroscopy.
Assuntos
Excipientes , Espectroscopia de Ressonância Magnética/métodos , Tecnologia Farmacêutica/métodos , Alginatos/química , Carragenina/química , Celulose/análogos & derivados , Excipientes/análise , Excipientes/química , Ácido Glucurônico/química , Ácidos Hexurônicos/química , Transição de Fase , Amido/análogos & derivados , Termogravimetria , Viscosidade , Água/análiseRESUMO
Solid-state nuclear magnetic resonance (SSNMR) spectroscopy has become more prevalent in the pharmaceutical industry due to its nondestructive nature and the wealth of information it can provide on a wide variety of solid samples. In this study, SSNMR spectra and relaxation times were used to analyze differences in monomer composition, molecular weight (MW), and water content among various sodium alginate samples. Differences in structure could be determined via spectral deconvolution of SSNMR spectra, and differences in intrinsic viscosity, MW, and water content were found to correlate to SSNMR relaxation times. The technique was found to be selective and sensitive enough to detect these changes in sodium alginate even when diluted with another excipient and compressed into a tablet.
Assuntos
Alginatos/química , Excipientes/química , Espectroscopia de Ressonância Magnética , Tecnologia Farmacêutica/métodos , Água/análise , Cálcio/análise , Configuração de Carboidratos , Sequência de Carboidratos , Ácido Glucurônico/química , Ácidos Hexurônicos/química , Peso Molecular , Transição de Fase , Comprimidos , Tecnologia Farmacêutica/normas , Termogravimetria , ViscosidadeRESUMO
The purpose of this study is to determine whether sodium alginate solutions' rheological parameters are meaningful relative to sodium alginate's use in the formulation of calcium alginate gels. Calcium alginate gels were prepared from six different grades of sodium alginate (FMC Biopolymer), one of which was available in ten batches. Cylindrical gel samples were prepared from each of the gels and subjected to compression to fracture on an Instron Universal Testing Machine, equipped with a 1-kN load cell, at a cross-head speed of 120 mm/min. Among the grades with similar % G, (grades 1, 3, and 4), there is a significant correlation between deformation work (L(E)) and apparent viscosity (η(app)). However, the results for the partial correlation analysis for all six grades of sodium alginate show that L(E) is significantly correlated with % G, but not with the rheological properties of the sodium alginate solutions. Studies of the ten batches of one grade of sodium alginate show that η(app) of their solutions did not correlate with L(E) while tan δ was significantly, but minimally, correlated to L(E). These results suggest that other factors--polydispersity and the randomness of guluronic acid sequencing--are likely to influence the mechanical properties of the resultant gels. In summary, the rheological properties of solutions for different grades of sodium alginate are not indicative of the resultant gel properties. Inter-batch differences in the rheological behavior for one specific grade of sodium alginate were insufficient to predict the corresponding calcium alginate gel's mechanical properties.
Assuntos
Alginatos/química , Reologia/métodos , Estresse Mecânico , Alginatos/normas , Géis/normas , Ácido Glucurônico/química , Ácido Glucurônico/normas , Ácidos Hexurônicos/química , Ácidos Hexurônicos/normas , Soluções Farmacêuticas/química , Soluções Farmacêuticas/normas , Distribuição Aleatória , Reologia/normasRESUMO
Polymeric excipients are often the least well-characterized components of pharmaceutical formulations. The aim of this study was to facilitate the QbD approach to pharmaceutical manufacturing by evaluating the inter-grade and inter-batch variability of pharmaceutical-grade polymeric excipients. Sodium alginate, a widely used polymeric excipient, was selected for evaluation using appropriate rheological methods and test conditions. The materials used were six different grades of sodium alginate and an additional ten batches of one of the grades. To compare the six grades, steady shear measurements were conducted on solutions at 1%, 2%, and 3% w/w, consistent with their use as thickening agents. Small-amplitude oscillation (SAO) measurements were conducted on sodium alginate solutions at higher concentrations (4-12% w/w) corresponding to their use in controlled-release matrices. In order to compare the ten batches of one grade, steady shear and SAO measurements were performed on their solutions at 2% w/w and 8% w/w, respectively. Results show that the potential interchangeability of these different grades used as thickening agents could be established by comparing the apparent viscosities of their solutions as a function of both alginate concentration and shear conditions. For sodium alginate used in controlled-release formulations, both steady shear behavior of solutions at low concentrations and viscoelastic properties at higher concentrations should be considered. Furthermore, among batches of the same grade, significant differences in rheological properties were observed, especially at higher solution concentrations. In conclusion, inter-grade and inter-batch variability of sodium alginate can be determined using steady shear and small-amplitude oscillation methods.
Assuntos
Alginatos/química , Preparações de Ação Retardada/química , Excipientes/química , Cálcio/análise , Composição de Medicamentos , Ácido Glucurônico/química , Ácidos Hexurônicos/química , Soluções Farmacêuticas/química , Reologia , Resistência ao Cisalhamento , ViscosidadeRESUMO
A series of pyrimidine benzamide-based thrombopoietin receptor agonists is described. The lead molecule contains a 2-amino-5-unsubstituted thiazole, a group that has been associated with idiosyncratic toxicity. The potential for metabolic oxidation at C-5 of the thiazole, the likely source of toxic metabolites, was removed by substitution at C-5 or by replacing the thiazole with a thiadiazole. Potency in the series was improved by modifying the substituents on the pyrimidine and/or on the thiazole or thiadiazole pendant aryl ring. In vivo examination revealed that compounds from the series are not highly bioavailable. This is attributed to low solubility and poor permeability.
Assuntos
Benzamidas/síntese química , Benzamidas/farmacologia , Pirimidinas/síntese química , Pirimidinas/farmacologia , Receptores de Trombopoetina/agonistas , Antígenos CD34/metabolismo , Benzamidas/farmacocinética , Diferenciação Celular/efeitos dos fármacos , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Fenômenos Químicos , Físico-Química , Simulação por Computador , Reações Cruzadas , Avaliação Pré-Clínica de Medicamentos , Humanos , Peso Molecular , Pirimidinas/farmacocinética , Solubilidade , Relação Estrutura-AtividadeRESUMO
Using SAR from two related series of pyrimidinetrione-based inhibitors, compounds with potent MMP-13 inhibition and >100-fold selectivity against other MMPs have been identified. Despite high molecular weights, clogPs, and polar surface areas, the compounds are generally well absorbed and have excellent pharmacokinetic (PK) properties when dosed as sodium salts. In a rat fibrosis model, a compound from the series displayed no fibrosis at exposures many fold greater than its MMP-13 IC50.