Electrospinning in personal protective equipment for healthcare work.

Protection in many service areas is mandatory for good performance in daily activities of workers, especially health areas. Personal protective equipment (PPE) is used to protect patients and health workers from contamination by harmful pathogens and body fluids during clinical attendance. The pandemic scenario caused by SARS-CoV-2 has shown that the world is not prepared to face global disease outbreaks, especially when it comes to the PPE of healthcare workers. In the last years, the world has faced a deficiency in the development of advanced technologies to produce high-quality PPE to attend to the exponential increasing demand. Electrospinning is a technology that can be used to produce high-quality PPE by improving the protective action of clothing. In the face of this concern, this manuscript presents as focus the potential of electrospinning to be applied in protective clothing. PPE mostly used by healthcare workers are also presented. The physico-chemical characteristics and production processes of medical textiles for PPE are addressed. Furthermore, an overview of the electrospinning technique is shown. It is important to highlight most research about electrospinning applied to PPE for health areas presents gaps and challenges; thus, future projections are also addressed in this manuscript.

Optimization of Sibipiruna activated carbon preparation by simplex-centroid mixture design for simultaneous adsorption of rhodamine B and metformin.

The present paper reports the application of augmented simplex-centroid mixture design to obtain a high BET surface area activated carbon using as reactants KOH, K2CO3 and K2C2O4. The optimum mixture composition was 2.51 g of KOH, 0.49 g of K2CO3 and absence of K2C2O4, generating an optimized AC (ACop) with SBET value equals to 1984 m2 g-1. The results herein obtained show that low amounts of K2CO3 can catalyze the pore development in the presence of KOH, increasing the surface area. Furthermore, the fractal dimensions of ACop are greater than 2.72, indicating the material has a complex pore structure with irregularities self-similar upon variations of resolution, as seen by SEM images. The TPD curves showed that the ACop has different oxygenated molecular fragments, which agrees with the pHPZC value (5.05). The ACop was applied in the adsorption of rhodamine B (RhB) and metformin (Met) in both binary and monocomponent systems. The simultaneous adsorption at 30 °C reveals that the adsorption capacity of RhB is 630.94 mg g-1, while for Met the value is 103.83 mg g-1.

KOH-super activated carbon from biomass waste: Insights into the paracetamol adsorption mechanism and thermal regeneration cycles.

A super activated carbon (SAC) was produced by KOH-activation of a biomass waste for paracetamol (PCT) adsorption from aqueous solution and for adsorption-thermal regeneration cycles. The SAC and the regenerated SAC after five adsorption-regeneration cycles (RSAC-5th) were fully characterized by several techniques. The N2 physisorption showed that the SBET values of the SAC and RSAC-5th are remarkably different, being 2794 m² g-1 and 889 m² g-1, respectively. The XPS analysis demonstrated that the SAC surface is composed by oxygen containing-groups, whilst the RSAC-5th also presents nitrogen ones, provenient from the PCT molecules. The adsorption studies revealed that the maximum adsorption capacity (Qm) for the SAC (356.22 mg g-1) is higher than that for RSAC-5th (113.69 mg g-1). Also, the results demonstrated that the PCT adsorption is governed by both physisorption and chemisorption and the ab initio calculations showed the chemisorption mainly occurs in carboxylic groups.

Stevia residue as new precursor of CO2-activated carbon: Optimization of preparation condition and adsorption study of triclosan.

The present work reports the preparation of CO2-activated carbon (AC) using Stevia rebaudiana (Bertoni) residue as a new carbon precursor. The experimental parameters were optimized via chemometrics tools to obtain an AC with high BET surface area (SBET). The found optimum condition was: activation temperature of 900 °C, CO2 flow of 165 cm3 g-1 and activation time of 60 min, providing an ACop with SBET of 874 m2 g-1. The ACop was characterized from several analytical techniques, which showed that it has heterogeneous morphology features and different surface chemical groups, predominating the acidic character. The adsorption performance of ACop for triclosan (TCS) removal from solution was investigated by kinetic, equilibrium and thermodynamic studies. The results showed that TCS adsorption process onto ACop is spontaneous and endothermic, wherein the mechanism occurs by different steps, which equally play important roles. Additionally, the monolayer adsorption capacity (Qm) was found to be 117.00 mg g-1.

Adsorption of caffeine on mesoporous activated carbon fibers prepared from pineapple plant leaves.

The present work reports the preparation of activated carbon fibers (ACFs) from pineapple plant leaves, and its application on caffeine (CFN) removal from aqueous solution. The preparation procedure was carried out using the H3PO4 as activating agent and slow pyrolysis under N2 atmosphere. The characterization of materials was performed from the N2 adsorption and desorption isotherms, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Raman spectroscopy, Boehm titration and pHpzc method. ACFs showed high BET surface area value (SBET = 1031m2 g-1), well-developed mesoporous structure (mesopore volume of 1.27cm³ g-1) and pores with average diameter (DM) of 5.87nm. Additionally, ACFs showed features of fibrous material with predominance of acid groups on its surface. Adsorption studies indicated that the pseudo-second order kinetic and Langmuir isotherm models were that best fitted to the experimental data. The monolayer adsorption capacity was found to be 155.50mgg-1. thermodynamic studies revealed that adsorption process is spontaneous, exothermic and occurs preferably via physisorption. The pineapple leaves are an efficient precursor for preparation of ACFs, which were successful applied as adsorbent material for removal of caffeine from the aqueous solutions.