Crack-Resistant and Tissue-Like Artificial Muscles with Low Temperature Activation and High Power Density.

Constructing soft robotics with safe human-machine interactions requires low-modulus, high-power-density artificial muscles that are sensitive to gentle stimuli. In addition, the ability to resist crack propagation during long-term actuation cycles is essential for a long service life. Herein, a material design is proposed to combine all these desirable attributes in a single artificial muscle platform. The design involves the molecular engineering of a liquid crystalline network with crystallizable segments and an ethylene glycol flexible spacer. A high degree of crystallinity can be afforded by utilizing aza-Michael chemistry to produce a low covalent crosslinking density, resulting in crack-insensitivity with a high fracture energy of 33 720 J m-2 and a high fatigue threshold of 2250 J m-2. Such crack-resistant artificial muscle with tissue-matched modulus of 0.7 MPa can generate a high power density of 450 W kg-1 at a low temperature of 40 °C. Notably, because of the presence of crystalline domains in the actuated state, no crack propagation is observed after 500 heating-cooling actuation cycles under a static load of 220 kPa. This study points to a pathway for the creation of artificial muscles merging seemingly disparate, but desirable properties, broadening their application potential in smart devices.

Numerical model of pressure generated by elastic compression garments on a compressible human limb analogue.

OBJECTIVE: This study aimed to formulate a numerical approach (finite element modelling (FEM)) to calculate pressure values generated by compression garments on a compressible limb analogue, and to validate the numerical approach using experimental measurements. Existing models were also compared. METHOD: Experimentally measured pressure values and deformation caused by compression bands on a compressible human limb analogue were compared with values predicted using the Young-Laplace equation, a previously formulated analytical model and the FEM. RESULTS: The FEM provided greater accuracy in predicting the pressure generated by compression bands compared to existing models. The FEM also predicted deformation of the limb analogue with good agreement relative to experimental values. CONCLUSION: It was concluded that modelling the non-uniform manner in which the way a limb analogue is compressed should be incorporated into future modelling of the pressures generated by compression garments on a compressible limb analogue. DECLARATION OF INTEREST: The authors have no conflicts of interest to declare.

Edge-Functionalized Graphene/Polydimethylsiloxane Composite Films for Flexible Neural Cuff Electrodes.

The design of neural electrodes has changed in the past decade, driven mainly by the development of new materials that open the possibility of manufacturing electrodes with adaptable mechanical properties and promising electrical properties. In this paper, we report on the mechanical and electrochemical properties of a polydimethylsiloxane (PDMS) composite with edge-functionalized graphene (EFG) and demonstrate its potential for use in neural implants with the fabrication of a novel neural cuff electrode. We have shown that a 200 µm thick 1:1 EFG/PDMS composite film has a stretchability of up to 20%, a Young's modulus of 2.52 MPa, and a lifetime of more than 10000 mechanical cycles, making it highly suitable for interfacing with soft tissue. Electrochemical characterization of the EFG/PDMS composite film showed that the capacitance of the composite increased up to 35 times after electrochemical reduction, widening the electrochemical water window and remaining stable after soaking for 5 weeks in phosphate buffered saline. The electrochemically activated EFG/PDMS electrode had a 3 times increase in the charge injection capacity, which is more than double that of a commercial platinum-based neural cuff. Electrochemical and spectrochemical investigations supported the conclusion that this effect originated from the stable chemisorption of hydrogen on the graphene surface. The biocompatibility of the composite was confirmed with an in vitro cell culture study using mouse spinal cord cells. Finally, the potential of the EFG/PDMS composite was demonstrated with the fabrication of a novel neural cuff electrode, whose double-layered and open structured design increased the cuff stretchability up to 140%, well beyond that required for an operational neural cuff. In addition, the cuff design offers better integration with neural tissue and simpler nerve fiber installation and locking.

Designing strong, fast, high-performance hydrogel actuators.

Hydrogel actuators displaying programmable shape transformations are particularly attractive for integration into future soft robotics with safe human-machine interactions. However, these materials are still in their infancy, and many significant challenges remain presenting impediments to their practical implementation, including poor mechanical properties, slow actuation speed and limited actuation performance. In this review, we discuss the recent advances in hydrogel designs to address these critical limitations. First, the material design concepts to improve mechanical properties of hydrogel actuators will be introduced. Examples are also included to highlight strategies to realize fast actuation speed. In addition, recent progress about creating strong and fast hydrogel actuators are sumarized. Finally, a discussion of different methods to realize high values in several aspects of actuation performance metrics for this class of materials is provided. The advances and challenges discussed in this highlight could provide useful guidelines for rational design to manipulate the properties of hydrogel actuators toward widespread real-world applications.

Ultra-Soft Organogel Artificial Muscles Exhibiting High Power Density, Large Stroke, Fast Response and Long-Term Durability in Air.

Polymeric gel-based artificial muscles exhibiting tissue-matched Young's modulus (10 Pa-1 MPa) promise to be core components in future soft machines with inherently safe human-machine interactions. However, the ability to simultaneously generate fast, large, high-power, and long-lasting actuation in the open-air environment, has yet been demonstrated in this class of ultra-soft materials. Herein, to overcome this hurdle, the design and synthesis of a twisted and coiled liquid crystalline glycerol-organogel (TCLCG) is reported. Such material with a low Young's modulus of 133 kPa can surpass the actuation performance of skeletal muscles in a variety of aspects, including actuation strain (66%), actuation rate (275% s-1 ), power density (438 kW m-3 ), and work capacity (105 kJ m-3 ). Notably, its power density is 14 times higher than the record of state-of-the-art polymeric gels. No actuation performance degradation is detected in the TCLCG even after air exposure for 7 days, owing to the excellent water retention ability enabled by glycerol as co-solvent with water. Using TCLCG, mobile soft robots with extraordinary maneuverability in unstructured environments are successfully demonstrated, including a crawler showing fast bidirectional locomotion (0.50 mm s-1 ) in a small-confined space, and a roller that can escape after deep burying in sand.

Artificial Muscles and Soft Robotic Devices for Treatment of End-Stage Heart Failure.

Medical soft robotics constitutes a rapidly developing field in the treatment of cardiovascular diseases, with a promising future for millions of patients suffering from heart failure worldwide. Herein, the present state and future direction of artificial muscle-based soft robotic biomedical devices in supporting the inotropic function of the heart are reviewed, focusing on the emerging electrothermally artificial heart muscles (AHMs). Artificial muscle powered soft robotic devices can mimic the action of complex biological systems such as heart compression and twisting. These artificial muscles possess the ability to undergo complex deformations, aiding cardiac function while maintaining a limited weight and use of space. Two very promising candidates for artificial muscles are electrothermally actuated AHMs and biohybrid actuators using living cells or tissue embedded with artificial structures. Electrothermally actuated AHMs have demonstrated superior force generation while creating the prospect for fully soft robotic actuated ventricular assist devices. This review will critically analyze the limitations of currently available devices and discuss opportunities and directions for future research. Last, the properties of the cardiac muscle are reviewed and compared with those of different materials suitable for mechanical cardiac compression.

A Coiled Carbon Nanotube Yarn-Integrated Surface Electromyography System To Monitor Isotonic and Isometric Movements.

A surface electromyogram (sEMG) electrode collects electrical currents generated by neuromuscular activity by a noninvasive technique on the skin. It is particularly attractive for wearable systems for various human activities and health care monitoring. However, it remains challenging to discriminate EMG signals from isotonic (concentric/eccentric) and isometric movements. By applying nanotechnology, we provide a coiled carbon nanotube (CNT) yarn-integrated sEMG device to overcome sEMG-based motion recognition. When the arm was contracted at different angles, the sEMG-derived root mean square amplitude signals were constant regardless of the angle of the moving arm. However, the coiled CNT yarn-derived open circuit voltage (OCV) signals proportionally increased when the arm's angle increased, and presented negative and positive values depending on the moving direction of the arm. Moreover, isometric contraction is characterized by the onset of EMG signals without an OCV signal, and isotonic contraction is determined by both EMG signals and OCV signals. Taken together, the integration of EMG and coiled CNT yarn electrodes provides complementary information, including the strength, direction, and degree of muscle movement. Therefore, we suggest that our system has high potential as a wearable system to monitor human motions in industrial and human system applications.

Dynamic Mechanical and Creep Behaviour of Meltspun PVDF Nanocomposite Fibers.

Piezoelectric fibers have an important role in wearable technology as energy generators and sensors. A series of hybrid nanocomposite piezoelectric fibers of polyinylidene fluoride (PVDF) loaded with barium-titanium oxide (BT) and reduced graphene oxide (rGO) were prepared via the melt spinning method. Our previous studies show that high-performance fibers with 84% of the electroactive ß-phase in the PVDF generated a peak output voltage up to 1.3 V and a power density of 3 W kg-1. Herein, the dynamic mechanical and creep behavior of these fibers were investigated to evaluate their durability and piezoelectric performance. Dynamic mechanical analysis (DMA) was used to provide phenomenological information regarding the viscoelastic properties of the fibers in the longitudinal direction. DSC and SEM were employed to characterize the crystalline structure of the samples. The storage modulus and the loss tangent increased by increasing the frequency over the temperature range (-50 to 150 °C) for all of the fibers. The storage modulus of the PVDF/rGO nanocomposite fibers had a higher value (7.5 GPa) in comparison with other fibers. The creep and creep recovery behavior of the PVDF/nanofillers in the nanocomposite fibers have been explored in the linear viscoelastic region at three different temperatures (10-130 °C). In the PVDF/rGO nanocomposite fibers, strong sheet/matrix interfacial interaction restricted the mobility of the polymer chains, which led to a higher modulus at temperatures 60 and 130 °C.

Dual high-stroke and high-work capacity artificial muscles inspired by DNA supercoiling.

Powering miniature robots using actuating materials that mimic skeletal muscle is attractive because conventional mechanical drive systems cannot be readily downsized. However, muscle is not the only mechanically active system in nature, and the thousandfold contraction of eukaryotic DNA into the cell nucleus suggests an alternative mechanism for high-stroke artificial muscles. Our analysis reveals that the compaction of DNA generates a mass-normalized mechanical work output exceeding that of skeletal muscle, and this result inspired the development of composite double-helix fibers that reversibly convert twist to DNA-like plectonemic or solenoidal supercoils by simple swelling and deswelling. Our modeling-optimized twisted fibers give contraction strokes as high as 90% with a maximum gravimetric work 36 times higher than skeletal muscle. We found that our supercoiling coiled fibers simultaneously provide high stroke and high work capacity, which is rare in other artificial muscles.

Unipolar stroke, electroosmotic pump carbon nanotube yarn muscles.

Success in making artificial muscles that are faster and more powerful and that provide larger strokes would expand their applications. Electrochemical carbon nanotube yarn muscles are of special interest because of their relatively high energy conversion efficiencies. However, they are bipolar, meaning that they do not monotonically expand or contract over the available potential range. This limits muscle stroke and work capacity. Here, we describe unipolar stroke carbon nanotube yarn muscles in which muscle stroke changes between extreme potentials are additive and muscle stroke substantially increases with increasing potential scan rate. The normal decrease in stroke with increasing scan rate is overwhelmed by a notable increase in effective ion size. Enhanced muscle strokes, contractile work-per-cycle, contractile power densities, and energy conversion efficiencies are obtained for unipolar muscles.

3D Printing Microactuators for Soft Microrobots.

Current additive manufacturing, including three-dimensional (3D) and so-called four-dimensional printing, of soft robotic devices is limited to millimeter sizes. In this study, we present additive manufacturing of soft microactuators and microrobots to fabricate even smaller structures in the micrometer domain. Using a custom-built extrusion 3D printer, microactuators are scaled down to a size of 300 × 1000 µm2, with minimum thickness of 20 µm. Microactuators combined with printed body and electroactive polymers to drive the actuators are fabricated from computer-aided design model of the device structure. To demonstrate the ease and versatility of 3D printing process, microactuators with varying lengths ranging from 1000 to 5000 µm are fabricated and operated. Likewise, microrobotic devices consisting of a rigid body and individually controlled free-moving arms or legs are 3D printed to explore the microfabrication of soft grippers, manipulators, or microrobots through simple additive manufacturing technique.

Bidirectional Core Sandwich Structure of Reduced Graphene Oxide and Spinnable Multiwalled Carbon Nanotubes for Electromagnetic Interference Shielding Effectiveness.

Thin and flexible electromagnetic shielding materials have recently emerged because of their promising applications in drones, portable electronics, military defense facilities, etc. This research develops an electromagnetic interference (EMI) shielding material by a bidirectional lattice sandwich structure (BLSS), which is formed by liquid crystalline graphene oxide (LCGO) and an orthogonal pattern of spinnable multiwalled (OPSM) nanotubes in consideration of the movement of electromagnetic waves. The average EMI shielding effectiveness (SE) of the developed material with 0.5 wt % reduced LCGO (r-LCGO) and an OPSM nanotube composed of 64 layers was approximately 66.1 dB in the X-band frequency range (8.2-12.4 GHz, wavelength: 3.5-2.5 cm), which corresponds to a shielding efficiency of 99.9999%. Also, its absorption effectiveness is 99.7% of the total EMI SE, indicating that it has a remarkable ability to prevent secondary damage induced by EM reflection. The specific EMI SE (SSE/t) of the composite material considering the contribution of thickness (t) ranged from 21 953 to 2259 dB cm2/g.

Experimental evaluation and analytical model of the pressure generated by elastic compression garments on a deformable human limb analogue.

Compression garments are extensively used for various therapeutic treatments and are expected to deliver accurate and reproducible compression pressures. This study focuses on developing an analytical model to predict the pressure generation by compression garments on human limb analogues. The analogues consisted of non-compressible and compressible cylinders that were chosen as the first step towards evaluating pressure generation on real human limbs. An experimental platform was developed to quantify the relationship between material properties, initial garment extension and pressure. A mathematical model was presented that provided greater accuracy in predicting the pressure generated by compression garments than the existing Young-Laplace equation for compressible limb analogues.

Coaxial mussel-inspired biofibers: making of a robust and efficacious depot for cancer drug delivery.

Biopolymer-based hydrogels have emerged as promising platforms for drug delivery systems (DDSs) due to their inherent biocompatibility, tunable physical properties and controllable degradability. Yet, drug release in majority of these systems is solely contingent on diffusion of drug molecules through the hydrogel, which often leads to burst release of drugs from these systems. Herein, inspired by the chemistry of mussel adhesive proteins, a new generation of coaxial hydrogel fibers was developed that could simultaneously exert both affinity and diffusion control over the release of chemotherapeutic drugs. Specifically, dopamine-modified alginate hydrogel along with chemotherapeutic drugs (doxorubicin or gemcitabine) was used as the main core component to confer affinity-controlled release, while a methacrylated-alginate hydrogel was used as the shell composition to provide the controlled diffusion barrier. It was shown that our coaxial mussel-inspired biofibers yielded biocompatible hydrogel fibers (as indicated by comprehensive in vitro and in vivo experiments) with favourable properties including controlled swelling, and enhanced mechanical properties, when compared against single fibers made from unmodified alginate. Notably, it was observed that these coaxial fibers were capable of releasing the two drugs in a slower manner, when compared to single fibers made from pure alginate, which was partly attributed to stronger interactions of drugs with dopamine-modified alginate (the core element of coaxial fibers) as observed from zeta-potential measurements. It was further shown that these drug-loaded coaxial fibers had optimal anticancer activity both in vitro and in vivo using various pancreatic cancer cell lines. Most remarkably, drug loaded coaxial fibers, particularly doxorubicin-containing fibers, had higher anticancer effect in vivo compared to systemic injection of equivalent dosage of the drugs. Altogether, these biocompatible and robust hydrogel fibers may be further used as neoadjuvant or adjuvant therapies for controlled delivery of chemotherapeutic drugs locally to the tumor sites.

Advanced Actuator Materials Powered by Biomimetic Helical Fiber Topologies.

Helical constructs are ubiquitous in nature at all size domains, from molecular to macroscopic. The helical topology confers unique mechanical functions that activate certain phenomena, such as twining vines and vital cellular functions like the folding and packing of DNA into chromosomes. The understanding of active mechanical processes in plants, certain musculature in animals, and some biochemical processes in cells provides insight into the versatility of the helix. Most of these natural systems consist of helically oriented filaments embedded in a compliant matrix. In some cases, the matrix can change volume and in others the filaments can contract and the matrix is passive. In both cases, the helically arranged fibers determine the overall shape change with a great variety of responses involving length contraction/elongation, twisting, bending, and coiling. Synthetic actuator materials and systems that employ helical topologies have been described recently and demonstrate many fascinating and complex shape changes. However, significant new opportunities exist to mimic some of the most remarkable actions in nature, including the Vorticella's coiling stalk and DNA's supercoils, in the quest for superior artificial muscles.

Carbon Nanotube Yarn for Fiber-Shaped Electrical Sensors, Actuators, and Energy Storage for Smart Systems.

Smart systems are those that display autonomous or collaborative functionalities, and include the ability to sense multiple inputs, to respond with appropriate operations, and to control a given situation. In certain circumstances, it is also of great interest to retain flexible, stretchable, portable, wearable, and/or implantable attributes in smart electronic systems. Among the promising candidate smart materials, carbon nanotubes (CNTs) exhibit excellent electrical and mechanical properties, and structurally fabricated CNT-based fibers and yarns with coil and twist further introduce flexible and stretchable properties. A number of notable studies have demonstrated various functions of CNT yarns, including sensors, actuators, and energy storage. In particular, CNT yarns can operate as flexible electronic sensors and electrodes to monitor strain, temperature, ionic concentration, and the concentration of target biomolecules. Moreover, a twisted CNT yarn enables strong torsional actuation, and coiled CNT yarns generate large tensile strokes as an artificial muscle. Furthermore, the reversible actuation of CNT yarns can be used as an energy harvester and, when combined with a CNT supercapacitor, has promoted the next-generation of energy storage systems. Here, progressive advances of CNT yarns in electrical sensing, actuation, and energy storage are reported, and the future challenges in smart electronic systems considered.

Self-Healing Electrode with High Electrical Conductivity and Mechanical Strength for Artificial Electronic Skin.

A self-healing electrode is an electrical conductor that can repair internal damage by itself, similar to human skin. Since self-healing electrodes are based on polymers and hydrogels, these components are still limited by low electrical conductivity and mechanical strength. In this study, we designed an electrically conductive, mechanically strong, and printable self-healing electrode using liquid crystal graphene oxide (LCGO) and silver nanowires (AgNWs). The conductive ink was easily prepared by simply mixing LCGO and AgNWs solutions. The ultrathin (3 µm thick) electrode can be printed in various shapes, such as a butterfly, in a freestanding state. The maximum conductivity and strength of the LCGO/AgNW composite were 17 800 S/cm and 4.2 MPa, respectively; these values are 24 and 4 times higher, respectively, than those of a previously developed self-healing electrode. The LCGO/AgNW composite self-healed internal damage in ambient conditions with moisture and consequently recovered 96.8% electrical conductivity and 95% mechanical toughness compared with the undamaged state. The electrical properties of the composite exhibited metallic tendencies. Therefore, these results suggest that the composite can be used as an artificial electronic skin that detects environmental conditions, such as compression and temperature. This self-healing artificial electronic skin could be applied to human condition monitoring and robotic sensing systems.

Bio-Inspired Stretchable and Contractible Tough Fiber by the Hybridization of GO/MWNT/Polyurethane.

Spider silks represent stretchable and contractible fibers with high toughness. Those tough fibers with stretchability and contractibility are attractive as energy absorption materials, and they are needed for wearable applications, artificial muscles, and soft robotics. Although carbon-based materials and poly(vinyl alcohol) (PVA) composite fibers exhibit high toughness, they are still limited in low extensibility and an inability to operate in the wet-state condition. Herein, we report stretchable and contractible fiber with toughness that is inspired by the structure of spider silk. The bioinspired tough fiber provides 495 J/g of gravimetric toughness, which exceeds 165 J/g of spider silk. Besides, the tough fiber was reversibly stretched to ∼80% strain without damage. This toughness and stretchability are realized by hybridization of aligned graphene oxide/multiwalled carbon nanotubes in a polyurethane matrix as elastic amorphous regions and ß-sheet segments of spider silk. Interestingly, the bioinspired tough fiber contracted up to 60% in response to water and humidity similar to supercontraction of the spider silk. It exhibited 610 kJ/m3 of contractile energy density, which is higher than previously reported moisture driven actuators. Therefore, this stretchable and contractible tough fiber could be utilized as an artificial muscle in soft robotics and wearable devices.

Biomimetic Thermal-sensitive Multi-transform Actuator.

Controllable and miniaturised mechanical actuation is one of the main challenges facing various emerging technologies, such as soft robotics, drug delivery systems, and microfluidics. Here we introduce a simple method for constructing actuating devices with programmable complex motions. Thermally responsive hydrogels based on poly(N-isopropylacrylamide) (PNIPAM) and its functionalized derivatives (f-PNIPAM) were used to control the lower critical solution temperature (LCST) or the temperature at which the gel volume changes. Techniques for ultra-violet crosslinking the monomer solutions were developed to generate gel sheets with controllable crosslink density gradients that allowed bending actuation to specified curvatures by heating through the LCST. Simple molding processes were then used to construct multi-transform devices with complex shape changes, including a bioinspired artificial flower that shows blossoming and reverse blossoming with a change in temperature.

Thermally Responsive Torsional and Tensile Fiber Actuator Based on Graphene Oxide.

Graphene-based actuators are of practical interest because of their relatively low cost compared with other nanocarbon materials, such as carbon nanotubes. We demonstrate the simple fabrication of graphene oxide (GO)-based fibers with an infiltrated nylon-6,6 polymer by wet spinning. These fibers could be twisted to form torsional actuators and further coiled to form tensile actuators. By controlling the relative twisting and coiling direction of the GO/nylon fiber, we were able to realize reversible contraction or elongation actuation with strokes as high as -80 and 75%, respectively, when the samples were heated to 200 °C. The tensile actuation showed a remarkably little hysteresis. Moreover, this GO/nylon actuator could lift loads over 100 times heavier than itself and generate a stable actuation at high temperatures over the melting point of the polymer. This novel kind of GO-based actuator, which has a multidirectional actuation, has potential for a wide range of applications such as artificial muscles, robotics, and temperature sensing.