RESUMO
Polydopamine (PDA) has garnered significant interest for applications in biosensors, drug delivery, and tissue engineering. However, similar polycatecholamines like polynorepinephrine (PNE) with additional hydroxyl groups and poly-α-methylnorepinephrine (PAMN) with additional hydroxyl and methyl groups remain unexplored in the biosensing domain. This research introduces three innovative biosensing platforms composed of ternary nanocomposite based on reduced graphene oxide (RGO), gold nanoparticles (Au NPs), and three sister polycatecholamine compounds (PDA, PNE, and PAMN). The study compares and evaluates the performance of the three biosensing systems for the ultrasensitive detection of Mycobacterium tuberculosis (MTB). The formation of the nanocomposites was meticulously examined through UV-Visible, Raman, XRD, and FT-IR studies with FE-SEM and HR-TEM analysis. Cyclic voltammetry and differential pulse voltammetry measurements were also performed to determine the electrochemical characteristics of the modified electrodes. Electrochemical biosensing experiments reveal that the RGO-PDA-Au, RGO-PNE-Au, and RGO-PAMN-Au-based biosensors detected target DNA up to a broad detection range of 0.1 × 10-8 to 0.1 × 10-18 M, with a low detection limit (LOD) of 0.1 × 10-18, 0.1 × 10-16, and 0.1 × 10-17 M, respectively. The bioelectrodes were proved to be highly selective with excellent sensitivities of 3.62 × 10-4 mA M-1 (PDA), 7.08 × 10-4 mA M-1 (PNE), and 6.03 × 10-4 mA M-1 (PAMN). This study pioneers the exploration of two novel mussel-inspired polycatecholamines in biosensors, opening avenues for functional nanocoatings that could drive further advancements in this field.
Assuntos
Técnicas Biossensoriais , Técnicas Eletroquímicas , Ouro , Grafite , Indóis , Limite de Detecção , Nanopartículas Metálicas , Polímeros , Técnicas Biossensoriais/métodos , Indóis/química , Polímeros/química , Técnicas Eletroquímicas/métodos , Grafite/química , Ouro/química , Animais , Nanopartículas Metálicas/química , Mycobacterium tuberculosis , Bivalves/química , Nanocompostos/química , Eletrodos , Norepinefrina/análiseRESUMO
Chronic wounds, such as burns and diabetic foot ulcers, pose significant challenges to global healthcare systems due to prolonged hospitalization and increased costs attributed to susceptibility to bacterial infections. The conventional use of antibiotic-loaded and metal-impregnated dressings exacerbates concerns related to multidrug resistance and skin argyrosis. In response to these challenges, our research introduces a unique approach utilizing antibiotic-free smart hydrogel wound dressings with integrated infection eradication and diagnostic capabilities. Electrospinning stands out as a method capable of producing hydrogel nanofibrous materials possessing favorable characteristics for treating wounds and detecting infections under conditions utilizing sustainable materials. In this study, innovative dressings are fabricated through electrospinning polycaprolactone (PCL)/gelatin (GEL) hybrid hydrogel nanofibers, incorporating pDA as a cross-linker, εPL as a broad-spectrum antimicrobial agent, and anthocyanin as a pH-responsive probe. The developed dressings demonstrate exceptional antioxidant (>90% radical scavenging) and antimicrobial properties (95-100% killing). The inclusion of polyphenols/flavonoids and εPL leads to absolute bacterial eradication, and in vitro assessments using HaCaT cells indicate increased cell proliferation, decreased reactive oxygen species (ROS) production, and enhanced cell viability (100% Cell viability). The dressings display notable alterations in color that correspond to different wound conditions. Specifically, they exhibit a red/violet hue under healthy wound conditions (pH 4-6.5) and a green/blue color under unhealthy wound conditions (pH > 6.5). These distinctive color changes provide valuable insights into the versatile applications of the dressings in the care and management of wounds. Our findings suggest that these antibiotic-free smart hydrogel wound dressings hold promise as an effective and sustainable solution for chronic wounds, providing simultaneous infection control and diagnostic monitoring. This research contributes to advancing the field of wound care, offering a potential paradigm shift in the development of next-generation wound dressings.
Assuntos
Anti-Infecciosos , Nanofibras , Nanofibras/química , Hidrogéis/farmacologia , Cicatrização , Bandagens , Anti-Infecciosos/farmacologia , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Antibacterianos/químicaRESUMO
This work mainly focuses on synthesizing and evaluating the efficiency of methylammonium lead halide-based perovskite (MAPbX3 ; X=Cl, Br, I) solar cells. We used the colloidal Hot-injection method (HIM) to synthesize MAPbX3 (X=Cl, Br, I) perovskites using the specific precursors and organic solvents under ambient conditions. We studied the structural, morphological and optical properties of MAPbX3 perovskites using XRD, FESEM, TEM, UV-Vis, PL and TRPL (time-resolved photoluminescence) characterization techniques. The particle size and morphology of these perovskites vary with respect to the halide variation. The MAPbI3 perovskite possesses a low band gap and low carrier lifetime but delivers the highest PCE among other halide perovskite samples, making it a promising candidate for solar cell technology. To further enrich the investigations, the conversion efficiency of the MAPbX3 perovskites has been evaluated through extensive device simulations. Here, the optical constants, band gap energy and carrier lifetime of MAPbX3 were used for simulating three different perovskite solar cells, namely I, Cl or Br halide-based perovskite solar cells. MAPbI3 , MAPbBr3 and MAPbCl3 absorber layer-based devices showed ~13.7 %, 6.9 % and 5.0 % conversion efficiency. The correlation between the experimental and SCAPS simulation data for HIM-synthesized MAPBX3 -based perovskites has been reported for the first time.
RESUMO
Since ancient times, Tuberculosis (TB) has been a severe invasive illness that has been prevalent for thousands of years and is also known as "consumption" or phthisis. TB is the most common chronic lung bacterial illness in the world, killing over 2 million people each year, caused by Mycobacterium tuberculosis (MTB). As per the reports of WHO, in spite of technology advancements, the average rate of decline in global TB infections from 2000-2018 was only 1.6% per year, and the worldwide reduction in TB deaths was only 11%. In addition, COVID-19 pandemic has reversed years of global progress in tackling TB with fewer diagnosed cases. The majority of undiagnosed patients of TB are found in low- and middle-income countries where the GeneXpert MTB/RIF assay and sputum smear microscopy have been approved by the WHO as reference procedures for quickly detecting TB. Biosensors, like other cutting-edge technologies, have piqued researchers' interest since they offer a quick and accurate way to identify MTB. Modern integrated technologies allow for the rapid, low-cost, and highly precise detection of analytes in extremely little amounts of sample by biosensors. Here in this review, we outlined the severity of tuberculosis (TB) and the most recent developments in the biosensors sector, as well as their various kinds and benefits for TB detection. The review also emphasizes how widespread TB is and how it needs accurate diagnosis and effective treatment.
Assuntos
Mycobacterium tuberculosis , Tuberculose , Humanos , Rifampina , Pandemias , Sensibilidade e Especificidade , Escarro/microbiologia , Tuberculose/diagnóstico , Tuberculose/epidemiologiaRESUMO
Herein, we report the paddy-straw-derived graphene quantum dots (GQDs)-reinforced vertical-aligned two-dimensional (2D) ZnO nanosheet-based flexible triboelectric nanogenerator (FTNG) for scavenging mechanical energy for the first time. The GQDs (diameter â¼5-7 nm) and ZnO nanosheets were grown using a hydrothermal method and seed-assisted chemical route, respectively. The X-ray diffraction and electron microscopy results confirmed the formation of a hexagonal wurtzite crystal structure and vertical-aligned morphology of 2D ZnO nanosheets. The GQD-reinforced ZnO-nanosheet-based FTNG device generated an output voltage of 40 V and current density of 2 µA/cm2, respectively, whereas pristine vertical-aligned ZnO-nanosheet-based device produced an output voltage of only 16 V and a current density of 0.36 µA/cm2, respectively. The performance of the GQD-ZnO nanosheet FTNG device was also measured under illumination of the UV light, and a drastic increase in the output voltage is observed as compared to a pristine ZnO-nanosheet-based device. The GQD-reinforced ZnO nanosheets exhibited very high dielectric constant of 40 at low frequency side. The current finding suggested a novel approach to efficiently harvest mechanical energy and a novel method to fabricate the self-powered UV sensors and tribotronics devices using agrowaste-derived GQDs and ZnO nanosheets.
RESUMO
Electrolysis of water to produce hydrogen requires an efficient catalyst preferably made of cheap and abundant metal ions for the improved water oxidation reaction. An Fe-based film has been deposited in a single step by electrochemical deposition at temperatures higher than the room temperature. Until now, the electrodeposition of iron oxide has been carried out at 298 K or at lower temperatures under a controlled atmosphere to prohibit atmospheric oxidation of Fe2+ of the iron precursor. A metal inorganic complex, ferrocene, and non-aqueous electrolyte medium propylene carbonate have been used to achieve electrodeposition of iron oxide without the need of any inert or controlled atmosphere. At 298 K, the amorphous film was formed, whereas at 313 K and at higher temperatures, the hematite film was grown, as confirmed by X-ray diffraction. The transformation of iron of the ferrocene into a higher oxidation state under the experimental conditions used was further confirmed by X-ray photoelectron spectroscopy, ultraviolet-visible, and electron paramagnetic resonance spectroscopic methods. The films deposited at 313 K showed the best performance for water oxidation with remarkable long-term electrocatalytic stability and an impressive turnover frequency of 0.028 s-1 which was 4.5 times higher than that of films deposited at 298 K (0.006 s-1). The observed overpotential to achieve a current density of 10 mA cm-2 was found to be 100 mV less for the film deposited at 313 K compared to room-temperature-derived films under similar experimental conditions. Furthermore, electrochemical impedance data revealed that films obtained at 313 K have the least charge transfer resistance (114 Ω) among all, supporting the most efficient electron transport in the film. To the best of our knowledge, this is the first-ever report where the crystalline iron-based film has been shown to be electrodeposited without any post-deposition additional treatment for alkaline oxygen evolution reaction application.
RESUMO
MXene, a new member of 2D material, unites the eminence of hydrophilicity, large surface groups, superb flexibility and excellent conductivity. Because of its prodigious characteristics, MXene has gained much approbation among researchers worldwide. MXene's noteworthy features, such as its electrical conductivity, structural property, magnetic behaviour, etc., manifest a broad spectrum of applications, including environment, catalytic, wireless communications, electromagnetic interference (EMI) shielding, drug delivery, wound dressing, bio-imaging, antimicrobial and biosensor. In this review article, an overview of the latest advancements in the applications of MXene has been reported. First, various synthesis strategies of MXene will be summarized, followed by the different structural, physical and chemical properties. The current advances in versatile applications have been discussed. The article aims to incorporate all the possible applications of MXene, making it a versatile material that juxtaposes it with other 2D materials. A separate section is dedicated to the bottlenecks for future developments and recommendations.
Assuntos
Sistemas de Liberação de Medicamentos , Catálise , Condutividade ElétricaRESUMO
Polydopamine (PDA) has established itself as a promising grafting and coating material, particularly for functional group-deprived electrochemically active nanomaterials such as graphene, MXene, CNT, metal nanoparticles, and so on, and has proven its extensive applicability in the design and development of electrochemical biosensor devices. However, polynorepinephrine (PNE), a sister compound of PDA, having additional -OH groups and greater coating uniformity and biocompatibility, has never been studied in the field of biosensors. Herein, we investigated PNE as a coating material for reduced graphene oxide (RGO) and gold nanoparticles (Au) in order to build an electrochemical genosensor for Mycobacterium tuberculosis (MTB) detection. Biotin-Avidin chemistry was used to covalently immobilize probe DNA (ssDNA) specific to MTB to the nanocomposite surface on glassy carbon electrode (GCE) in order to construct biosensing electrodes. The formation of RGO/PNE and RGO/PNE/Au nanocomposite as well as the immobilization of ssDNA onto the bioelectrodes are both corroborated by UV-Visible, Raman, and XRD studies with FE-SEM and HR-TEM analysis. The electrochemical studies performed using cyclic voltammetry (CV) and linear sweep voltammetry (LSV) showed the significant enhancement in charge transfer kinetics of RGO/PNE/GCE and RGO/PNE/Au/GCE electrode compared to GO/GCE electrode. The biosensing investigations performed using ssDNA/avidin/RGO/PNE/Au/GCE bioelectrode showed high sensitivity (2.3 × 10-3 mA µM-1), low detection limit (0.1 × 10-7 µM), broad detection range (0.1 × 10-2 to 0.1 × 10-7 µM) with good selectivity and low response time (5 s) of the developed sensor. In comparison to the analogous RGO/PDA/Au material system, RGO/PNE/Au demonstrated increased enzyme loading, improved electrochemical responsiveness, and superior biosensing performance.
Assuntos
Grafite , Nanopartículas Metálicas , Mycobacterium tuberculosis , Nanocompostos , Grafite/química , Ouro/química , Avidina , Técnicas Eletroquímicas , Nanopartículas Metálicas/química , Carbono/química , Nanocompostos/químicaRESUMO
This research reports a robust method for developing advanced flexible and moldable X-ray shielding bandages by harnessing an in situ synthesized polygonal cerium oxide nanoparticles/MWCNTs nanocomposite. The developed advanced hybrid nanocomposite was thoroughly blended with silicone rubber, namely polydimethylsiloxane (PDMS) to form an advanced hybrid gel which was then coated on a conventional cotton bandage to develop an advanced flexible, moldable X-ray shielding bandage. The combined effects were analyzed to determine their unique X-ray reduction properties and were very effective. The linear attenuation value of the developed bandage (untreated cotton bandage coated with CeO2/MWCNT/PDMS), varied from 1.274 m-1 to 0.549 m-1 and the mass attenuation values from 0.823 m2 kg-1 to 0.354 m2 kg-1 for kVp 40 to 100 respectively. The improved features of high density and efficiency of protection are because of the binary protective effect of CeO2 nanoparticles and MWCNT. The morphological features of the developed material were characterized using various techniques such as TEM, SEM, XRD, and EDXA. The developed bandage is an entirely lead-free product, thin and light, has high shielding performance, flexibility, durability, good mechanical strength, doesn't crack easily (no crack), and can be washed in water. It may therefore be useful in various fields, including diagnostic radiology, cardiology, urology, and neurology treatments, attenuating emergency radiation leakages in CT scanner rooms or via medical equipment, and safeguarding complex shielding machinery in public areas.
RESUMO
Tuberculosis (TB) has been a devastating human illness for thousands of years. According to the WHO, around 10.4 million new cases of tuberculosis are identified every year, with 1.8 million deaths. To reduce these statistics and the mortality rate, an early and accurate TB diagnosis is essential. This study offers a highly sensitive and selective electrochemical biosensor for Mycobacterium tuberculosis (MTB) detection based on a ternary nanocomposite of reduced graphene oxide, polydopamine, and gold nanoparticles (rGO-PDA-AuNP). Avidin-biotin coupling was used to bind the MTB probe DNA onto the rGO-PDA-AuNP modified glassy carbon electrode (ssDNA/avidin/rGO-PDA-AuNP). UV-Visible, Raman, XRD, and TEM were used to evaluate the structural and morphological characteristics of rGO-PDA-AuNP. Furthermore, DNA immobilization is validated using FESEM and FT-IR techniques. The modified electrodes were electrochemically analyzed using cyclic voltammetry (CV) and linear sweep voltammetry (LSV), and the results indicate that the produced electrode can detect target DNA up to 0.1 × 10-7 mM with 2.12 × 10-3 mA µM-1 sensitivity and a response time of 5 s. The constructed genosensor displayed high sensitivity and stability, and it also provides a unique strategy for diagnosing MTB at an early stage. Furthermore, our rGO-PDA-AuNP/GCE-based electrochemical platform has broad potential for creating biosensor systems for detecting various infectious pathogens and therapeutically significant biomarkers.
Assuntos
Técnicas Biossensoriais , Grafite , Nanopartículas Metálicas , Mycobacterium tuberculosis , Nanocompostos , Humanos , Ouro/química , Avidina , Espectroscopia de Infravermelho com Transformada de Fourier , Nanopartículas Metálicas/química , Grafite/química , Eletrodos , Nanocompostos/química , Técnicas Eletroquímicas/métodos , Técnicas Biossensoriais/métodosRESUMO
Herein, we demonstrate a process for the synthesis of a highly crystalline bi-functional manganese (Mn)-doped zinc silicate (Zn2SiO4) nanostructures using a low-cost sol-gel route followed by solid state reaction method. Structural and morphological characterizations of Mn-doped Zn2SiO4 with variable doping concentration of 0.03, 0.05, 0.1, 0.2, 0.5, 1.0, and 2.0 wt% were investigated by using X-ray diffraction and high-resolution transmission electron microscopy (HR-TEM) techniques. HR-TEM-assisted elemental mapping of the as-grown sample was conducted to confirm the presence of Mn in Zn2SiO4. Photoluminescence (PL) spectra indicated that the Mn-doped Zn2SiO4 nanostructures exhibited strong green emission at 521 nm under 259 nm excitation wavelengths. It was observed that PL intensity increased with the increase of Mn-doping concentration in Zn2SiO4 nanostructures, with no change in emission peak position. Furthermore, magnetism in doped Zn2SiO4 nanostructures was probed by static DC magnetization measurement. The observed photoluminescence and magnetic properties in Mn-doped Zn2SiO4 nanostructures are discussed in terms of structural defect/lattice strain caused by Mn doping and the Jahn-Teller effect. These bi-functional properties of as-synthesized Zn2SiO4 nanostructures provide a new platform for their potential applications towards magneto-optical and spintronic and devices areas.
RESUMO
The linear attenuation coefficients and tenth-value layers are determined experimentally for the newly developed Cement-based high-density Concrete and Fly-Ash-based Geopolymer high-density Concrete using Red-Mud-based synthetic aggregate made up from industrial waste. Linear attenuation coefficients were determined in narrow and broad beam conditions for five megavoltage X-ray photon beam energies, i.e. 6, 10, 15 MV, and 6 and 10 MV-FFF generated by Varian TrueBeam medical linear accelerator. These materials are found to be more effective in radiation shielding when compared with ordinary concrete and hematite ore-based high-density concrete making it a useful construction material for radiotherapy accelerator vaults. Similar values of linear attenuation coefficients are observed for all the above-mentioned X-ray beam energies when cement is replaced with fly-ash in ordinary concrete, hematite-based high-density concrete and red-mud-based high-density concrete, making it a good eco-friendly alternative of cement and useful for the construction of radiotherapy vaults.
Assuntos
Proteção Radiológica , Raios X , Materiais de Construção , Aceleradores de PartículasRESUMO
Heavy metal ion (HMI) sensors are the most sought commercial devices for environmental monitoring and food analysis research due to serious health concerns associated with HMI overdosage. Herein, we developed an effective electrochemical sensor for simultaneous detection of four HMI (Cd2+, Pb2+, Fe2+, and Cu2+) using a ternary nanocomposite of reduced graphene oxide functionalized with polydopamine and alanine (ALA/pDA/rGO). Comprehensive spectroscopic and microscopic characterizations were performed to ensure the formation of the ternary nanocomposite. The developed nanocomposite on glassy carbon electrode (GCE) yields >2-fold higher current than GO/GCE electrode with excellent electrochemical stability and charge transfer rate. Using DPV, various chemical and electrochemical parameters, such as supporting electrolyte, buffer pH, metal deposition time, and potential, were optimized to achieve highly sensitive detection of targeted HMI. For Cd2+, Pb2+, Fe2+, and Cu2+ sensing devised sensor exhibited detection limits of 1.46, 2.86, 50.23, and 17.95 ppb and sensitivity of 0.0929, 0.0744, 0.0051, and 0.0394 µA/ppb, respectively, with <6% interference. The sensor worked similarly well for real water samples with HMI. This study demonstrates a novel strategy for concurrently detecting and quantifying multiple HMI in water and soil using a smart ternary nanocomposite-based electrochemical sensor, which can also detect HMI in food samples.
Assuntos
Cádmio , Nanocompostos , Cádmio/análise , Chumbo , Óxidos/química , Técnicas Eletroquímicas/métodos , Carbono/química , Água , Nanocompostos/químicaRESUMO
Due to their bactericidal and fluid repellent capabilities, antimicrobial textiles with hydrophobic properties have aroused a lot of interest in healthcare, hygiene, air purifiers, water purification systems, food packaging, and other domains. Silver and silver-derived compounds have long been employed in antimicrobial coatings; nevertheless, they are costly, limiting their widespread use. In this work, we combined mussel-inspired polydopamine (pDA) coating chemistry with graphene oxide (GO) and antimicrobial copper compounds (Cu(NO3)2, CuCl2, Cu nanoparticles (CuNPs), and Cu-Carbon nanofibers (Cu-CNF)) to create hydrophobic antimicrobial nanocoatings on cotton fabric. The structural, morphological, wettability, and antibacterial characteristics of the produced coatings were evaluated. The fabric coated with Cu(NO3)2 and CuNPs had good hydrophobicity, which was stabilized for 30 min following GO integration. The coated fabric with GO and CuNPs showed 100% bacterial inhibition for S. aureus and a 99.995% reduction for P. aeruginosa bacteria. Overall, this bioinspired approach to developing antimicrobial coatings on fabric utilizing Cu(NO3)2 and CuNPs with GO shows a lot of promise in preventing the transmission of bacterial and viral infections through contaminated garments and has potential in designing clothing for healthcare settings such as PPEs, gowns, aprons, face mask filters, curtains, and so on.
Assuntos
Anti-Infecciosos , Cobre , Cobre/farmacologia , Cobre/química , Prata/farmacologia , Staphylococcus aureus , Têxteis , Antibacterianos/farmacologia , Antibacterianos/química , Interações Hidrofóbicas e Hidrofílicas , Pseudomonas aeruginosaRESUMO
Highly crystalline few-layered tungsten disulfide (WS2) nanosheets were synthesized via a cost-effective, low-temperature hydrothermal route. X-ray diffraction and HR-TEM analysis confirmed the formation of hexagonal nanosheets with thickness of â¼6-8 nm. Raman analysis and AFM results confirmed the few-layered 2H phase of WS2 nanosheets. The UV-vis study shows absorption peaks at 219 and 271 nm with large band gap value of â¼3.12 eV for WS2 nanosheets. Surprisingly, WS2 nanosheets show a dielectric constant of approximately ε' ≈ 5245, whereas bulk WS2 material exhibits a dielectric constant of 7482373. An almost 1426-fold decrease in the value of dielectric constant for the WS2 nanosheet is observed. Such an extreme reduction in dielectric constant and observance of large band gap in WS2 nanosheet were observed for the first time. The present study reveals the excellent and unusual optical and dielectric properties for their potential application in optoelectronic, dielectric, solar, phosphor, and various nanoelectronic devices.
RESUMO
We report the fabrication of a high-performance flexible piezoelectric nanogenerator based on S-defect-neutralised few-layered molybdenum disulphide (MoS2) nanosheets. High-resolution transmission electron microscopy (HR-TEM) and Raman spectroscopy confirmed the number of stacked layers in the MoS2 sheets to be 3-5. The defect, electronic and chemical states of the as-grown MoS2 nanosheets were investigated by X-ray photoelectron spectroscopy (XPS). An as-fabricated MoS2 nanogenerator with a CNT electrode generates an excellent high output voltage of 22 V and a record-high output current density of 9.00 µA cm-2 under a small vertical compressive force of 1.5 kgf. The piezoelectric charge coefficient of the 2D MoS2 nanosheets was investigated using piezoelectric force microscopy (PFM), and a very high piezoelectric charge coefficient (d33) of 120 pm V-1 was obtained. The energy conversion efficiency of the device was about 30%. Moreover, the MoS2 nanosheets show a high dielectric constant of about 2649 at low frequency. The results suggest that the absence of S-defects can reduce the free charge carrier and screening effect, resulting in a high output voltage and current density. The performance of the nanogenerator is discussed in terms of its high d33, high dielectric constant, the crystalline mixed phase of MoS2 and the electronic state of the MoS2 nanosheets.
RESUMO
Antibacterial properties of copper have been known for ages. With the rise of antimicrobial resistance (AMR), hospital-acquired infections, and the current SARS-CoV-2 pandemic, copper and copper-derived materials are being widely researched for healthcare ranging from therapeutics to advanced wound dressing to medical devices. We cover current research that highlights the potential uses of metallic and ionic copper, copper alloys, copper nanostructures, and copper composites as antibacterial, antifungal, and antiviral agents, including those against the SARS-CoV-2 virus. The applications of copper-enabled engineered materials in medical devices, wound dressings, personal protective equipment, and self-cleaning surfaces are discussed. We emphasize the potential of copper and copper-derived materials in combating AMR and efficiently reducing infections in clinical settings.
RESUMO
Red mud is a solid hazardous alumina industrial waste, which is rich in iron, titanium, aluminum, silicon, calcium, etc. The red mud contains 30-60% of hematite, which is suitable for shielding high energy X- and gamma rays. So, the iron rich red mud was converted into diagnostic X-ray shielding tiles through ceramic route by adding a certain weight percentage of BaSO4 and binders (kaolin clay or sodium hexametaphosphate) with it. The kaolin clay tile possess sufficient impact strength (failure point is 852â¯mm for 19â¯mm steel ball) and flexural strength of ~25â¯N/mm2, which is suitable for wall applications. The 10.3â¯mm and 14.7â¯mm thick red mud:BaSO4:kaolin clay tile possess the attenuation equivalent to 2â¯mm and 2.3â¯mm lead at 125 kVp and 140 kVp, respectively. No heavy elements were found to leach out except chromium and arsenic from the sintered tiles. However, the leaching of Cr (0.6 ppm) and As (0.015 ppm) was found to be well below the permissible limit. These tiles can be used in the X-ray diagnosis, CT scanner, bone densitometry, and cath labs instead of toxic lead sheet and thereby to protect the operating personnel, public, and environment from radiation hazards.
Assuntos
Óxido de Alumínio , Resíduos Perigosos , Cerâmica , Resíduos Industriais/análise , Ferro , RadiografiaRESUMO
Current advances in constructing functional nanomaterials and elegantly designed nanostructures have opened up new possibilities for the fabrication of viable field biosensors. Two-dimensional materials (2DMs) have fascinated much attention due to their chemical, optical, physicochemical, and electronic properties. They are ultrathin nanomaterials with unique properties such as high surface-to-volume ratio, surface charge, shape, high anisotropy, and adjustable chemical functionality. 2DMs such as graphene-based 2D materials, Silicate clays, layered double hydroxides (LDHs), MXenes, transition metal dichalcogenides (TMDs), and transition metal oxides (TMOs) offer intensified physicochemical and biological functionality and have proven to be very promising candidates for biological applications and technologies. 2DMs have a multivalent structure that can easily bind to single-stranded DNA/RNA (aptamers) through covalent, non-covalent, hydrogen bond, and π-stacking interactions, whereas aptamers have a small size, excellent chemical stability, and low immunogenicity with high affinity and specificity. This review discussed the potential of various 2D material-based aptasensor for diagnostic applications, e.g., protein detection, environmental monitoring, pathogens detection, etc.
Assuntos
Técnicas Biossensoriais , Grafite , Nanoestruturas , Técnicas Biossensoriais/métodos , Argila , DNA de Cadeia Simples , Grafite/química , Humanos , Nanoestruturas/química , Oligonucleotídeos , Óxidos/química , RNA , SilicatosRESUMO
Ionic liquids are gaining high attention due to their extremely unique physiochemical properties and are being utilized in numerous applications in the field of electrochemistry and bio-nanotechnology. The excellent ionic conductivity and the wide electrochemical window open a new avenue in the construction of electrochemical devices. On the other hand, carbon nanomaterials, such as graphene (GR), graphene oxide (GO), carbon dots (CDs), and carbon nanotubes (CNTs), are highly utilized in electrochemical applications. Since they have a large surface area, high conductivity, stability, and functionality, they are promising in biosensor applications. Nevertheless, the combination of ionic liquids (ILs) and carbon nanomaterials (CNMs) results in the functional ILs-CNMs hybrid nanocomposites with considerably improved surface chemistry and electrochemical properties. Moreover, the high functionality and biocompatibility of ILs favor the high loading of biomolecules on the electrode surface. They extremely enhance the sensitivity of the biosensor that reaches the ability of ultra-low detection limit. This review aims to provide the studies of the synthesis, properties, and bonding of functional ILs-CNMs. Further, their electrochemical sensors and biosensor applications for the detection of numerous analytes are also discussed.