Imaging and Timing Performance of 1cm × 1cm Position-sensitive Solid-state Photomultiplier.

We have designed and built a large-area 1cm × 1cm position-sensitive solid-state photomultiplier (PS-SSPM) for use in detector design for medical imaging applications. Our new large-area PS-SSPM concept implements resistive network between the micro-pixels, which are photodiodes operated in Geiger mode, called Geiger Photodiodes (GPDs), to provide continuous position sensitivity. Here we present imaging and timing performance of the large-area PS-SSPM for different temperatures and operating biases to find the optimum operating parameters for the device in imaging applications. A detector module was built by coupling a polished 8×8 LYSO array, with 1×1×20 mm3 elements, to a 1×1 cm2 PS-SSPM. Flood images recorded at room temperature show good crystal separation as all 64 elements were separated from each other. Cooling the device at 10 °C showed significant improvement. The device optimum bias voltage was ~4.5V over breakdown voltage. The coincidence timing resolution was improved significantly by increasing the operating bias, as well as by lowering the temperature to 0 °C. Results show excellent imaging performance and good timing response with a large-area PS-SSPM device.

Low-energy coexisting band in 154Gd.

A low-energy coexisting band Jpi (Ex keV) 0(+) (1182), 2(+) (1418), 4(+) (1701) is identified in the deformed nucleus, 154Gd. Detailed gamma-ray spectroscopy following the beta decays of 154Eu (J=3), (g,m(1),m(2))154Tb (J=0,3,7) is used to establish this structure. The structure is explained in terms of the pairing and deformation degrees of freedom, a "pairing isomer," which results from the nu[505] upward arrow Nilsson intruder orbital.