Development of Greener and Stable Inkjet-Printable Perovskite Precursor Inks for All-Printed Annealing-Free Perovskite Solar Mini-Modules Manufacturing.

Inkjet-printing is considered an emerging manufacturing process for developing perovskite solar cells (PSCs) with low material wastes and high production throughput. Up-to-now, all case studies on inkjet-printed PSCs are based on the exploitation of toxic solvents and/or high-molarity perovskite precursor inks that are known to enable the development of high-efficiency photovoltaics (PVs). The present study provides a new insight for developing lower-toxicity, high performance and stable (for more than 2 months) inkjet-printable perovskite precursor inks for fully ambient air processed PSCs. Using an ink composed of a green low vapor pressure noncoordinating solvent and only 0.8 m of perovskite precursors, the feasibility of fabricating high-quality and with minimum coffee-ring defects, annealing-free perovskite absorbent layers under ambient atmosphere is demonstrated. Noteworthily, the PSCs fabricated using the industry-compatible carbon-based hole transport material free architecture and the proposed ink present an efficiency >13% that is considered on the performance records for the under-consideration PV architecture employing an inkjet-printed active layer. Outstanding is also found the stability of the devices under the conditions determined by the ISOS-D-1 protocol (T95  = 1000 h). Finally, the perspective of upscaling PSCs to the mini-module level (100 cm2 aperture area) is demonstrated, with the upscaling losses to be as low as 8.3%rel dec-1 per upscaled active area.

Intriguing physicochemical properties and impact of co-dopants on N-doped graphene oxide based ZnS nanowires for photocatalytic application.

Superparamagnetic N-doped graphene oxide (GO)- with ZnS nanowires was synthesized by a one-step hydrothermal method by doping dilute amounts of Ga, Cr, In, and Al ions for water treatment and biomedical applications. In these experiments, to enhance their properties, 2% of Ga3+, In3+, and or Al3+ were codoped along with 2% Cr ions in these ZnS nanowires. The nanocomposite with the composition, In0.02Cr0.02Zn0.96S, has better photocatalytic efficiency than other co-doped nanocomposites. The In (metalloids) and Cr (transition metal ion) are the best combinations to increase the magnetic properties which are beneficial for photocatalytic activity. Synthesized nanocomposite materials were characterized by several techniques such as X-ray diffraction, Field emission-scanning electron microscope (FESEM) with EDAX, vibrating sample magnetometer (VSM), UV-Vis, X-ray photoelectron spectroscopy (XPS), and fluorescence spectroscopy. The correlation of intriguing magnetic properties with their photocatalytic properties is also discussed. XPS was employed for the detection of surface defects, phase transformation, and the nature of chemical components present in the nanocomposites. The Frankel and substitutional defects have a direct impact on photocatalytic activity that was determined from the fluorescence (FL) spectroscopy. FL and XPS reveal that the Cr and In codoped composite has a higher percentage of defects hence its photocatalytic efficiency reaches 94.21%.

TiO2/palygorskite composite nanocrystalline films prepared by surfactant templating route: synergistic effect to the photocatalytic degradation of an azo-dye in water.

Microfibrous palygorskite clay mineral and nanocrystalline TiO(2) are incorporating in the preparation of nanocomposite films on glass substrates via sol-gel route at 500°C. The synthesis involves a simple chemical method employing nonionic surfactant molecule as pore directing agent along with the acetic acid-based sol-gel route without direct addition of water molecules. Drying and thermal treatment of composite films lead to the elimination of organic material while ensure the formation of TiO(2) nanoparticles homogeneously distributed on the surface of the palygorskite microfibers. TiO(2) nanocomposite films without cracks consisted of small crystallites in size (12-16 nm) and anatase crystal phase was found to cover palygorskite microfibers. The composite films were characterized by microscopy techniques, UV-vis, IR spectroscopy, and porosimetry methods in order to examine their structural properties. Palygorskite/TiO(2) composite films with variable quantities of palygorskite (0-2 w/w ratio) were tested as new photocatalysts in the photo-discoloration of Basic Blue 41 azo-dye in water. These nanocomposite films proved to be very promising photocatalysts and highly effective to dye's discoloration in spite of the small amount of immobilized palygorskite/TiO(2) catalyst onto glass substrates. 3:2 palygorskite/TiO(2) weight ratio was finally the most efficient photocatalyst while reproducible discoloration results of the dye were obtained after three cycles with same catalyst. It was also found that palygorskite showed a positive synergistic effect to the TiO(2) photocatalysis.

Photophysical Behavior of a New Gemini Surfactant in Neat Solvents and in Micellar Environments.

A novel fluorescent gemini surfactant, 1,4-bis-(2'-(N-dodecyl pyridinio-4"-yl)ethenyl)benzene dibromide, abbreviated BDPEBB, has been synthesized and its photophysical properties have been studied in different environments. BDPEBB has a limited solubility in alcohols where it is found in aggregate form at concentrations>/=1 mM. In other solvents, e.g., water, it is only found in aggregate form, even at much lower concentrations. Solvent polarity has a small and insignificant solvatochromic effect but alcohols give a specific interaction with BDPEBB, causing a significant hypsochromic shift in absorption maxima and a large increase in relative fluorescence efficiency. Pyrene fluorescence is effectively quenched by BDPEBB. Pyrene also forms associative complexes with BDPEBB in water. These complexes are partly dissociated in the presence of surfactant micelles. Triton X-100 micelles provide a favorable environment for BDPEBB solubilization well distinguished from the behavior of ionic surfactants. Small quantities of BDPEBB have a large influence on the behavior of aqueous sodium dodecylsulfate (SDS) and sodium decylsulfate (SDeS) micelles, inducing the formation of large aggregates, visible by the naked eye. These large aggregates are most probably microcrystals of BDPEBB(2+)/2DS(-) or BDPEBB(2+)/2DeS(-). The aggregation number of SDS and SDeS micelles in the absence and in the presence of BDPEBB has been calculated by exploitation of the static luminescence quenching kinetics of Ru(bpy)(3)(2+) by 9-methylanthracene, both solubilized in the micellar phase. It has been observed that Ru(bpy)(3)(2+) inhibits the precipitation of SDeS micelles in the presence of BDPEBB. Our results suggest that double-chain surfactant chromophores should be employed with particular care if they are to be used as probes of the micellar phase. Copyright 2000 Academic Press.