RESUMO
The creation of white and multicoloured 3D-printed objects with high color fidelity via powder sintering processes is currently limited by discolouration from thermal sensitizers used in the printing process. Here, we circumvent this problem by using switchable, photochromic tungsten oxide nanoparticles, which are colorless even at high concentrations. Upon ultraviolet illumination, the tungsten oxide nanoparticles can be reversibly activated, making them highly absorbing in the infrared. Their strong infrared absorption upon activation renders them efficient photothermal sensitizers that can act as fusing agents for polymer powders in sintering-based 3D printing. The WO3 nanoparticles show fast activation times, and when mixed with polyamide powders, they exhibit a heating-to-color-change ratio greatly exceeding other sensitizers in the literature. Upon mixing with colored inks, powders containing WO3 display identical coloration to a pristine powder. This demonstrates the potential of WO3, and photochromic nanoparticles in general as a new class of material for advanced manufacturing.
RESUMO
By combining X-ray absorption fine structure and X-ray diffraction measurements with density functional and molecular dynamics simulations, we study the structure of a set of AgxBi1-xS2 nanoparticles, a materials system of considerable current interest for photovoltaics. An apparent contradiction between the evidence provided by X-ray absorption and diffraction measurements is solved by means of the simulations. We find that disorder in the cation sublattice induces strong local distortions, leading to the appearance of short Ag-S bonds, the overall lattice symmetry remaining close to hexagonal.
RESUMO
Colloidal quantum dot (CQD) light-emitting diodes (LEDs) deliver a compelling performance in the visible, yet infrared CQD LEDs underperform their visible-emitting counterparts, largely due to their low photoluminescence quantum efficiency. Here we employ a ternary blend of CQD thin film that comprises a binary host matrix that serves to electronically passivate as well as to cater for an efficient and balanced carrier supply to the emitting quantum dot species. In doing so, we report infrared PbS CQD LEDs with an external quantum efficiency of ~7.9% and a power conversion efficiency of ~9.3%, thanks to their very low density of trap states, on the order of 1014 cm-3, and very high photoluminescence quantum efficiency in electrically conductive quantum dot solids of more than 60%. When these blend devices operate as solar cells they deliver an open circuit voltage that approaches their radiative limit thanks to the synergistic effect of the reduced trap-state density and the density of state modification in the nanocomposite.
RESUMO
The use of photothermal sensitizers to facilitate the sintering of polymer powders is rapidly becoming a pivotal additive manufacturing technology, impacting multiple sectors of industry. However, conventional carbon-based sensitizers can only produce black or gray objects. To create white or colorful prints with this method, visibly transparent equivalents are needed. Here, we address this problem by designing resonant photothermal sensitizers made of plasmonic nanoparticles that strongly absorb in the near-infrared, while only minimally interacting with visible light. Gold nanorods were coated with silica before being mixed with polyamide powders to create stable colorful nanocomposite powders. At resonance, these composites showed greatly improved light-to-heat conversion compared with equivalent composites using the industry standard carbon black as a sensitizer and could be sintered using low-power light sources. Furthermore, they appear much whiter and can produce brightly colored 3D objects when mixed with dyes. Our results open a new route to utilize plasmonic nanoparticles to produce colorful and functional 3D-printed objects.
RESUMO
Developing low-cost photovoltaic absorbers that can harvest the short-wave infrared (SWIR) part of the solar spectrum, which remains unharnessed by current Si-based and perovskite photovoltaic technologies, is a prerequisite for making high-efficiency, low-cost tandem solar cells. Here, infrared PbS colloidal quantum dot (CQD) solar cells employing a hybrid inorganic-organic ligand exchange process that results in an external quantum efficiency of 80% at 1.35 µm are reported, leading to a short-circuit current density of 34 mA cm-2 and a power conversion efficiency (PCE) up to 7.9%, which is a current record for SWIR CQD solar cells. When this cell is placed at the back of an MAPbI3 perovskite film, it delivers an extra 3.3% PCE by harnessing light beyond 750 nm.
RESUMO
The performance of ZnO/PbS colloidal quantum dot (CQD)-based heterojunction solar cells is hindered by charge carrier recombination at the heterojunction interface. Reducing interfacial recombination can improve charge collection and the photocurrent of the device. Here we report the use of a mixed nanocrystal (MNC) buffer layer comprising zinc oxide nanocrystals and lead sulfide quantum dots at the respective heterojunction interface. Remote trap passivation of the PbS CQDs taking place within this MNC layer reduces interfacial recombination and electron back transfer which in turn improves charge collection efficiency. Upon the addition of the MNC layer, the overall power conversion efficiency increases from 9.11 to 10.16% and Short-circuit current density (JSC) increases from 23.54 to 25.23 mA/cm2. Optoelectronic characterization of the solar cells confirms that the effects underlying device improvement are reduced trap density and improved charge collection efficiency due to the presence of the MNC buffer layer.
RESUMO
The power conversion efficiency of colloidal PbS-quantum-dot (QD)-based solar cells is significantly hampered by lower-than-expected open circuit voltage (VOC ). The VOC deficit is considerably higher in QD-based solar cells compared to other types of existing solar cells due to in-gap trap-induced bulk recombination of photogenerated carriers. Here, this study reports a ligand exchange procedure based on a mixture of zinc iodide and 3-mercaptopropyonic acid to reduce the VOC deficit without compromising the high current density. This layer-by-layer solid state ligand exchange treatment enhances the photovoltaic performance from 6.62 to 9.92% with a significant improvement in VOC from 0.58 to 0.66 V. This study further employs optoelectronic characterization, X-ray photoelectron spectroscopy, and photoluminescence spectroscopy to understand the origin of VOC improvement. The mixed-ligand treatment reduces the sub-bandgap traps and significantly reduces bulk recombination in the devices.
RESUMO
We present a simple conceptual model describing the absorption enhancement provided by diffraction gratings due to resonant coupling to guided modes in a multi-layered structure. In doing so, we provide insight into why certain guided modes are more strongly excited than others and demonstrate that the spatial overlap of the mode profile with the grating is important. The model is verified by comparison to optical simulations and experimental measurements. We fabricate metal nanoparticle gratings integrated as back contacts in solution-processed PbS colloidal quantum dot photodiodes. The measured photocurrent at the target wavelength is enhanced by 250%, with reference to planar devices, due to resonant coupling to guided modes with strong spatial overlap with the gratings. In comparison, resonant coupling to weakly overlapping modes results in a 25% increase at the same wavelength.
RESUMO
Over the last several years tremendous progress has been made in incorporating colloidal quantum dot (CQD) solids as photoactive components in optoelectronic devices. A large part of this progress is associated with significant advancements made in controlling the electronic doping of CQD solids. Today, a variety of strategies exists towards that purpose; this Minireview aims to survey the major published works in this subject. Additional attention is given to the many challenges associated with the task of doping CQDs, as well as to the realization of optoelectronic functionalities and applications upon successful light and heavy electronic doping of CQD solids.
RESUMO
More-efficient charge collection and suppressed trap recombination in colloidal quantum dot (CQD) solar cells is achieved by means of a bulk nano-heterojunction (BNH) structure, in which p-type and n-type materials are blended on the nanometer scale. The improved performance of the BNH devices, compared with that of bilayer devices, is displayed in higher photocurrents and higher open-circuit voltages (resulting from a trap passivation mechanism).
Assuntos
Fontes de Energia Elétrica , Nanotecnologia/instrumentação , Pontos Quânticos/química , Energia Solar , Coloides , Chumbo/química , Soluções , Sulfetos/química , Temperatura , Óxido de Zinco/químicaRESUMO
Colloidal quantum dots have emerged as a material platform for low-cost high-performance optoelectronics. At the heart of optoelectronic devices lies the formation of a junction, which requires the intimate contact of n-type and p-type semiconductors. Doping in bulk semiconductors has been largely deployed for many decades, yet electronically active doping in quantum dots has remained a challenge and the demonstration of robust functional optoelectronic devices had thus far been elusive. Here we report an optoelectronic device, a quantum dot homojunction solar cell, based on heterovalent cation substitution. We used PbS quantum dots as a reference material, which is a p-type semiconductor, and we employed Bi-doping to transform it into an n-type semiconductor. We then combined the two layers into a homojunction device operating as a solar cell robustly under ambient air conditions with power conversion efficiency of 2.7%.
RESUMO
High efficiency organic and hybrid solar cells create demand for novel electron acceptor materials that possess appropriate energetic band levels and bandgap for efficient solar energy harnessing. We present hybrid bulk heterojunction devices based on P3HT and bismuth sulfide nanocrystals, a semiconductor based on environmentally friendly compounds, with a power conversion efficiency of 1% and NIR sensitization at 700 nm of 30%, among the highest ever reported for P3HT.
RESUMO
Lead oxide nanocrystals are synthesised by injecting oxygen gas into an air and moisture free complex of Pb oleylamine and oleic acid in octadecene. Using various characterization methods including fabrication and testing of photovoltaic devices we explore the material properties and photovoltaic application of lead oxide nanocrystal films.
RESUMO
We report advances in the growth, characterization and photovoltaic properties of SnS nanocrystals, with controlled < 10 nm size, and their inclusion into a lead chalcogenide solar cell. The SnS/PbS nanocrystalline film heterojunction is shown to display a type II band alignment, in which the direction of flow of the photocurrent depends on the order of the layers and not the relative work functions of the contacts. On placing the SnS layer next to the indium tin oxide (ITO) cathode we observe a dramatic increase in V(oc) to as much as 0.45 V. Our results suggest that SnS nanocrystal films can be used in multi-junction solar cells, that a SnS/PbS heterojunction on its own shows photovoltaic behaviour, and that a SnS layer in an ITO/SnS/PbS/Al device is acting to suppress the flow of an electron injection current.
RESUMO
We present a method to directly align PbS nanocrystals in micron-sized superstructures within a conjugated polymer. First, lead sulfide nanocrystals are directly synthesized in a MEH-PPV suspension via a single pot, surfactant-free method. Post-synthesis precipitation of the composite solution involving mild oxidation of the nanocrystals results in the formation of nanocrystal-polymer and nanocrystal-oxide superstructures. Detailed TEM is used to study the crystallographic nature of these structures and the roles of polymer and lead sulfate. An epitaxial relationship between lead sulfide and lead sulfate at the nanoscale is shown, giving insight into the oxidation rates of the PbS nanocrystals' facets.