Reamed locked intramedullary nailing for studying femur fracture and its complications.

Morbidity associated with femur fractures in polytrauma patients is known to be high. The many unsolved clinical questions include the immunological effect of the fracture and its fixation, timing of fracture fixation, management of fracture non-union, effect of infection and critical size of bone defects. The aim of this study was to establish a clinically-relevant and reproducible animal model with regards to histological, biomechanical and radiological changes during bone healing. A custom-designed intramedullary nail with interlocking system (RabbitNail, RISystem AG, Davos Platz, Switzerland) was used for fixation, following femur fracture. New Zealand White rabbits were assigned to two groups: 1. closed fracture model (CF; non-survival model: n = 6, survival model: n = 3) with unilateral mid-shaft femur fracture created by blunt force; 2. osteotomy model (OT; survival model: n = 14) with unilateral transverse osteotomy creating femur fracture. There were no intraoperative complications and full-weight bearing was achieved in all survival rabbits. Significant periosteal reaction and callus formation were confirmed from 2 weeks postoperatively, with a significant volume formation (739.59 ± 62.14 mm3) at 8 weeks confirmed by micro-computed tomography (µ-CT). 2 months after fixation, there was no difference between the osteotomised and contralateral control femora in respect to the maximum torque (3.47 ± 0.35 N m vs. 3.26 ± 0.37 N m) and total energy (21.11 ± 3.09 N m × degree vs. 20.89 ± 2.63 N m × degree) required to break the femur. The data confirmed that a standardised internal fixation technique with an intramedullary nail for closed fracture or osteotomy produced satisfactory bone healing. It was concluded that important clinically-relevant studies can be conducted using this rabbit model.

Effects of scaffold architecture on cranial bone healing.

In the present study, polycaprolactone-tricalcium phosphate (PCL/TCP) scaffolds with two different fibre laydown patterns, which were coated with hydroxyapatite and gelatine, were used as an approach for optimizing bone regeneration in a critical-sized calvarial defect. After 12 weeks, bone regeneration was quantified using microcomputed tomography (micro-CT) analysis, biomechanical testing, and histological evaluation. Notably, the experimental groups with coated scaffolds showed lower bone formation and lower biomechanical properties within the defect compared to the uncoated scaffolds. Surprisingly, the different laydown pattern of the fibres resulted in different bone formation and biomechanical properties: the 0°/60°/120° scaffolds revealed lower bone formation and biomechanical properties compared to the 0°/90° scaffolds in all the experimental groups. Therefore, future bone regeneration strategies utilizing scaffolds should consider scaffold architecture as an important factor during the scaffold optimization stages in order to move closer to a clinical application.

Biomimetic tubular nanofiber mesh and platelet rich plasma-mediated delivery of BMP-7 for large bone defect regeneration.

There is a growing need for successful bone tissue engineering strategies and advanced biomaterials that mimic the structure and function of native tissues carry great promise. Successful bone repair approaches may include an osteoconductive scaffold, osteoinductive growth factors, cells with an osteogenic potential and capacity for graft vascularisation. To increase osteoinductivity of biomaterials, the local combination and delivery of growth factors has been developed. In the present study we investigated the osteogenic effects of calcium phosphate (CaP)-coated nanofiber mesh tube-mediated delivery of BMP-7 from a PRP matrix for the regeneration of critical sized segmental bone defects in a small animal model. Bilateral full-thickness diaphyseal segmental defects were created in twelve male Lewis rats and nanofiber mesh tubes were placed around the defect. Defects received either treatment with a CaP-coated nanofiber mesh tube (n = 6), an un-coated nanofiber mesh tube (n=6) a CaP-coated nanofiber mesh tube with PRP (n=6) or a CaP-coated nanofiber mesh tube in combination with 5 µg BMP-7 and PRP (n = 6). After 12 weeks, bone volume and biomechanical properties were evaluated using radiography, microCT, biomechanical testing and histology. The results demonstrated significantly higher biomechanical properties and bone volume for the BMP group compared to the control groups. These results were supported by the histological evaluations, where BMP group showed the highest rate of bone regeneration within the defect. In conclusion, BMP-7 delivery via PRP enhanced functional bone defect regeneration, and together these data support the use of BMP-7 in the treatment of critical sized defects.

Small animal bone healing models: standards, tips, and pitfalls results of a consensus meeting.

Small animal fracture models have gained increasing interest in fracture healing studies. To achieve standardized and defined study conditions, various variables must be carefully controlled when designing fracture healing experiments in mice or rats. The strain, age and sex of the animals may influence the process of fracture healing. Furthermore, the choice of the fracture fixation technique depends on the questions addressed, whereby intra- and extramedullary implants as well as open and closed surgical approaches may be considered. During the last few years, a variety of different, highly sophisticated implants for fracture fixation in small animals have been developed. Rigid fixation with locking plates or external fixators results in predominantly intramembranous healing in both mice and rats. Locking plates, external fixators, intramedullary screws, the locking nail and the pin-clip device allow different degrees of stability resulting in various amounts of endochondral and intramembranous healing. The use of common pins that do not provide rotational and axial stability during fracture stabilization should be discouraged in the future. Analyses should include at least biomechanical and histological evaluations, even if the focus of the study is directed towards the elucidation of molecular mechanisms of fracture healing using the largely available spectrum of antibodies and gene-targeted animals to study molecular mechanisms of fracture healing. This review discusses distinct requirements for the experimental setups as well as the advantages and pitfalls of the different fixation techniques in rats and mice.

Can the contra-lateral limb be used as a control with respect to analyses of bone remodelling?

Bone loss may result from remodelling initiated by implant stress protection. Quantifying remodelling requires bone density distributions which can be obtained from computed tomography scans. Pre-operative scans of large animals however are rarely possible. This study aimed to determine if the contra-lateral bone is a suitable control for the purpose of quantifying bone remodelling. CT scans of 8 pairs of ovine tibia were used to determine the likeness of left and right bones. The deviation between the outer surfaces of the bone pairs was used to quantify geometric similarity. The density differences were determined by dividing the bones into discrete volumes along the shaft of the tibia. Density differences were also determined for fractured and contra-lateral bone pairs to determine the magnitude of implant related remodelling. Left and right ovine tibiae were found to have a high degree of similarity with differences of less than 1.0mm in the outer surface deviation and density difference of less than 5% in over 90% of the shaft region. The density differences (10-40%) as a result of implant related bone remodelling were greater than left-right differences. Therefore, for the purpose of quantifying bone remodelling in sheep, the contra-lateral tibia may be considered an alternative to a pre-operative control.

Formalin fixation affects equilibrium partitioning of an ionic contrast agent-microcomputed tomography (EPIC-µCT) imaging of osteochondral samples.

OBJECTIVE: Equilibrium Partitioning of an Ionic Contrast agent with microcomputed tomography (EPIC-µCT) is a non-invasive technique to quantify and visualize the three-dimensional distribution of glycosaminoglycans (GAGs) in fresh cartilage tissue. However, it is unclear whether this technique is applicable to already fixed tissues. Therefore, this study aimed at investigating whether formalin fixation of bovine cartilage affects X-ray attenuation, and thus the interpretation of EPIC-µCT data. DESIGN: Osteochondral samples (n=24) were incubated with ioxaglate, an ionic contrast agent, for 22h prior to µCT scanning. The samples were scanned in both formalin-fixed and fresh conditions. GAG content was measured using a biochemical assay and normalized to wet weight, dry weight, and water content to determine potential reasons for differences in X-ray attenuation. RESULTS: The expected zonal distribution of contrast agent/GAGs was observed for both fixed and fresh cartilage specimens. However, despite no significant differences in GAG concentrations or physical properties between fixed and fresh samples, the average attenuation levels of formalin-fixed cartilage were 14.3% lower than in fresh samples. CONCLUSIONS: EPIC-µCT is useful for three-dimensional visualization of GAGs in formalin-fixed cartilage. However, a significant reduction in X-ray attenuation for fixed (compared to fresh) cartilage must be taken into account and adjusted for accordingly when quantifying GAG concentrations using EPIC-µCT.

A model for integrating clinical care and basic science research, and pitfalls of performing complex research projects for addressing a clinical challenge.

The collaboration of clinicians with basic science researchers is crucial for addressing clinically relevant research questions. In order to initiate such mutually beneficial relationships, we propose a model where early career clinicians spend a designated time embedded in established basic science research groups, in order to pursue a postgraduate qualification. During this time, clinicians become integral members of the research team, fostering long term relationships and opening up opportunities for continuing collaboration. However, for these collaborations to be successful there are pitfalls to be avoided. Limited time and funding can lead to attempts to answer clinical challenges with highly complex research projects characterised by a large number of "clinical" factors being introduced in the hope that the research outcomes will be more clinically relevant. As a result, the complexity of such studies and variability of its outcomes may lead to difficulties in drawing scientifically justified and clinically useful conclusions. Consequently, we stress that it is the basic science researcher and the clinician's obligation to be mindful of the limitations and challenges of such multi-factorial research projects. A systematic step-by-step approach to address clinical research questions with limited, but highly targeted and well defined research projects provides the solid foundation which may lead to the development of a longer term research program for addressing more challenging clinical problems. Ultimately, we believe that it is such models, encouraging the vital collaboration between clinicians and researchers for the work on targeted, well defined research projects, which will result in answers to the important clinical challenges of today.

A finite element analysis for the prediction of load-induced fluid flow and mechanochemical transduction in bone.

Interstitial fluid flow through the lacunocanalicular cavities of mechanically loaded bone provides the biophysical basis for a number of postulates regarding mechanotransduction in bone. Recently, the existence of load-induced fluid flow and its influence on molecular transport through bone has been confirmed using tracer methods to visualize fluid flow induced by in vivo four-point-bending of rat tibiae. In this paper, we present a theoretical two-stage approach for the calculation of load-induced flow fields and for the evaluation of their influence on molecular transport in bone loaded in four-point bending, analogous to the aforementioned experimental model. In the first stage, the fluid velocities are calculated using a three-dimensional, poroelastic finite element model. In the second stage, mass transport analysis, this calculated fluid flow serves as a forced convection flow and its contribution to the total transport potential is determined. Based on this combined approach, the overall tracer concentration in the loaded bone is significantly higher than that in the unloaded bone. Furthermore, augmentation of mass transport through convective flow is more pronounced in the tension band of the tissue, as compared to the compression band. In general, augmentation of tracer concentration via convective mechanisms is most pronounced in areas corresponding to lowest fluid velocities, which is indicative of fluid flow direction and areas of increased "dwell time" or accumulation during the loading cycle. This theoretical model, in combination with the corresponding experimental model, provides unique insight into the role of mechanical loads in modulating local flow distributions and concentration gradients within bone tissue.

In vivo demonstration of load-induced fluid flow in the rat tibia and its potential implications for processes associated with functional adaptation.

Load-induced extravascular fluid flow has been postulated to play a role in mechanotransduction of physiological loads at the cellular level. Furthermore, the displaced fluid serves as a carrier for metabolites, nutrients, mineral precursors and osteotropic agents important for cellular activity. We hypothesise that load-induced fluid flow enhances the transport of these key substances, thus helping to regulate cellular activity associated with processes of functional adaptation and remodelling. To test this hypothesis, molecular tracer methods developed previously by our group were applied in vivo to observe and quantify the effects of load-induced fluid flow under four-point-bending loads. Preterminal tracer transport studies were carried out on 24 skeletally mature Sprague Dawley rats. Mechanical loading enhanced the transport of both small- and larger-molecular-mass tracers within the bony tissue of the tibial mid-diaphysis. Mechanical loading showed a highly significant effect on the number of periosteocytic spaces exhibiting tracer within the cross section of each bone. For all loading rates studied, the concentration of Procion Red tracer was consistently higher in the tibia subjected to pure bending loads than in the unloaded, contralateral tibia. Furthermore, the enhancement of transport was highly site-specific. In bones subjected to pure bending loads, a greater number of periosteocytic spaces exhibited the presence of tracer in the tension band of the cross section than in the compression band; this may reflect the higher strains induced in the tension band compared with the compression band within the mid-diaphysis of the rat tibia. Regardless of loading mode, the mean difference between the loaded side and the unloaded contralateral control side decreased with increasing loading frequency. Whether this reflects the length of exposure to the tracer or specific frequency effects cannot be determined by this set of experiments. These in vivo experimental results corroborate those of previous ex vivo and in vitro studies. Strain-related differences in tracer distribution provide support for the hypothesis that load-induced fluid flow plays a regulatory role in processes associated with functional adaptation.

A finite difference model of load-induced fluid displacements within bone under mechanical loading.

Load-induced fluid flow in the lacunocanalicular network, induced by the mechanical loading of bone, is believed to play an important role in bone modelling, remodelling and adaptation processes. There are strong indications that this fluid flow is responsible for the mechanotransduction from external mechanical loads to the cells responsible for bone apposition or removal. Since direct flow measurements (especially in compact bone, in vivo and in situ) are not yet possible, theoretical modelling offers an alternative approach to determine the fluid flow velocities, displacements and effects of interstitial fluid flow. In this model, the fluid displacements in a middiaphyseal slab of a rat tibia under a cyclic four-point-bending load were calculated by applying Biot's theory of poroelasticity. The resulting differential equations were solved numerically for the fluid displacement vectors using the finite difference method. Thereby, the cross section located in the middle between the two inner points of force application was chosen for examination, such that the problem, although formulated in three dimensions, reduced itself to an essentially planar form. The maximal fluid displacements for the vector components in the cross sectional plane were found in the proximity of the neutral axis of bending. The direction of the displacement vectors was from the lateral aspect, which was in compression in the examined loading situation, towards the medial aspect in tension. In a parameter study it was found that the fluid displacement pattern and the distribution of fluid displacements remained constant for all the examined parameters, while the magnitude was influenced by the model parameters Young's modulus, Poisson's ratio and porosity. This study represents a further step in the examination of load-induced fluid displacements in loaded bone using theoretical models, aiming to understand the relationship between mechanical loading and bone modelling, remodelling and functional adaptation.

Influence of neuroactive drugs on corticosteroid feedback regulation of ACTH secretion in man.

Corticosteroid feedback effects on ACTH secretion in man can be manipulated by neuroactive drugs. In patients without endogenous corticosteroids (primary adrenocortical insufficiency) differential and integral feedback effects can be differentiated. When in these patients brain norepinephrine receptor activity was increased by desipramine, the normally negative differential feedback mechanism was converted into a positive one (paradoxical ACTH response). The pre-existing paradoxical ACTH response of patients with Cushing's disease after adrenalectomy was abolished after depletion of norepinephrine granules by means of reserpine.