Ni Porous Preforms Compacted with Al2O3 Particles and Al Binding Agent.

This work presents an energy-efficient, cheap, and rapid production method of a metal-ceramic preform with open porosity suitable for liquid metal infiltration and filtration applications. It is based on cold isostatic pressing of a mixture of relatively hard Ni and Al2O3 powders with the addition of small amount of Al powders, acting as a binding agent. Open porosity is primarily controlled by Al2O3 particles partially separating Ni particles from mutual contacts. Cold isostatic pressed green compacts were subjected to thermal oxidation by heating in air to 600 °C, 700 °C, and 800 °C. The weight gain and open porosity of oxidized compacts were examined. The chemical composition and microstructure were analyzed by SEM-EDS and XRD techniques. The stability of preforms and the effect of thermal cycling on the open porosity were tested by thermal cycling in an inert Ar atmosphere in the temperature range up to 800 °C. It appeared that, in addition to NiO being an expected product of oxidation, Ni aluminides and spinel particles also played an important role in inter-particle bonding formation. Ni-NiO porous composites resist chemical corrosion and exhibit structural and chemical stability at higher temperatures and admixed Al2O3 particles do not deteriorate them. After subsequent infiltration with Al, it can offer a lower density than other materials, which could result in lower energy consumption, which is highly needed in industries such as the automotive industry.

Effect of Temperature on the Complex Modulus of Mg-Based Unidirectionally Aligned Carbon Fiber Composites.

Composite materials based on magnesium-lithium (MgLi) and magnesium-yttrium (MgY) matrices reinforced with unidirectional carbon fibers were prepared using the gas pressure infiltration method. Two types of carbon fibers were used, high-strength PAN-based T300 fibers and high-modulus pitch-based Granoc fibers. The PAN-based carbon fibers have an internal turbostratic structure composed of crystallites. The pitch-based carbon fibers have a longitudinally aligned graphite crystal structure. The internal carbon fiber structure is crucial in the context of the interfacial reaction with the alloying element. There are various mechanisms of bonding to carbon fibers in the case of magnesium-lithium and magnesium-yttrium alloys. This paper presents the use of the DMA method for the characterization of the role of alloying elements in the quality of interfacial bonding and the influence on the complex modulus at increasingly elevated temperatures (50-250 °C). The complex modulus values of the composites with T300 fibers were in the range of 118-136 GPa. The complex modulus values of the composites with Granoc fibers were in the range of 198-236 GPa. The damping capacity of magnesium-based unidirectionally aligned carbon fiber composites is related to the quality of the interfacial bonding.