CE determination of the thermodynamic pKa values and limiting ionic mobilities of 14 low molecular mass UV absorbing ampholytes for accurate characterization of the pH gradient in carrier ampholytes-based IEF and its numeric simulation.

Fourteen low molecular mass UV absorbing ampholytes containing 1 or 2 weakly acidic and 1 or 2 weakly basic functional groups that best satisfy Rilbe's requirement for being good carrier ampholytes (ΔpKa = pKamonoanion - pKamonocation < 2) were selected from a large group of commercially readily available ampholytes in a computational study using two software packages (ChemSketch and SPARC). Their electrophoretic mobilities were measured in 10 mM ionic strength BGEs covering the 2 < pH < 12 range. Using our Debye-Hückel and Onsager-Fuoss laws-based new software, AnglerFish (freeware, https://echmet.natur.cuni.cz/software/download), the effective mobilities were recalculated to zero ionic strength from which the thermodynamic pKa values and limiting ionic mobilities of the ampholytes were directly calculated by Henderson-Hasselbalch equation-type nonlinear regression. The tabulated thermodynamic pKa values and limiting ionic mobilities of these ampholytes (pI markers) facilitate both the overall and the narrow-segment characterization of the pH gradients obtained in IEF in order to mitigate the errors of analyte ampholyte pI assignments caused by the usual (but rarely proven) assumption of pH gradient linearity. These thermodynamic pKa and limiting mobility values also enable the reality-based numeric simulation of the IEF process using, for example, Simul (freeware, https://echmet.natur.cuni.cz/software/download).

Online preconcentration of weak electrolytes at the pH boundary induced by a system zone in capillary zone electrophoresis.

Within the frame of the dynamic pH junction preconcentration technique in capillary electrophoresis, we introduce a novel approach based on the use of the pH boundary of a system zone for the preconcentration of general, multivalent, weak analytes in a system of binary, uni-univalent, background electrolytes (BGE). For such purpose, in addition to presenting a comprehensive flowchart for the development of a method for BGE preconcentration, we showed several model cases using acidic, basic and ampholytic analytes. Furthermore, we combined the flowchart with calculations in electrophoretic software PeakMaster to determine all necessary information such as analyte mobility, system zones and the amplitude of the pH boundary of a system zone as a function of the sample matrix. For an even more detailed understanding of the process, we also investigated changes in the pH boundary through computer simulations with Simul 5, providing an in-depth characterization of all model analytes according to the steps of the flowchart and to PeakMaster calculations for experimental verification of the final BGE preconcentration.

Direct Hadamard Transform Capillary Zone Electrophoresis without Instrumental Modifications.

We report the first successful implementation of a multiplexing method on a standard capillary electrophoresis system with UV detection that is independent of additional hardware. This was achieved using the Hadamard transform approach and employing vial exchange and voltage suspensions for translation of pseudorandom binary sequence elements into sample and background electrolyte injections of a capillary zone electrophoresis separation. Sequences exceeding peak capacity of the capillary were subdivided into shorter subsequences measured successively and realigned afterward based on EOF marker or analyte peaks. This way, we realized and deconvoluted modulation sequences as long as 8-bit (255 injections) for two systems containing either AMP or a mixture of the nucleotides (A,C,G,U)MP resulting in electropherograms of considerably improved signal-to-noise ratio. We achieved factors of intensity enhancement of around 6.9 and 5.2, respectively (theoretical maximum 8.0). This contribution, further, presents experimental and simulation studies on the effects on zones during injection and separation when experiencing voltage suspensions. Besides analysis of EOF behavior and influence of diffusion dispersion, we also provide data on the significance of specific electrophoretic errors such as peak position shift, inconsistent sample injection, and peak broadening on the quality of the inverse Hadamard transform. Moreover, the application of our approach to the practical analysis of a milk sample is described. The results demonstrate the applicability of multiplexing on unmodified standard CE instrumentation and establish a new suitable methodology to enhance the low sensitivity of on-column UV detection in capillary electrophoresis.

Investigation of Strain-Promoted Azide-Alkyne Cycloadditions in Aqueous Solutions by Capillary Electrophoresis.

The Cu-free 1,3-dipolar cycloaddition of cyclooctynes and azides is an up-and-coming method in bioorganic chemistry and other disciplines. However, broad application is still hampered by major drawbacks such as poor solubility of the reactants in aqueous media and low reaction rates. It is thus of high demand to devise a fast and user-friendly strategy for the optimization of reaction conditions and reagent design. We describe a capillary electrophoresis (CE) study of reaction kinetics in strain-promoted azide-alkyne cycloadditions (SPAAC) using substrates with acidic or basic functionalities. This study reveals that the pH value has a significant effect on reaction rates as a result of changes in the reactants' charge state via protonation or deprotonation, and the concomitant changes of electronic properties. This novel experimental setup also enables the study of even more challenging conditions such as reactions in micelles and we did indeed observe much faster SPAAC reactions in the presence of surfactants. Careful combination of the above-mentioned parameters resulted in the identification of conditions enabling remarkable rate enhancement by a factor of 80. This electrophoretic method may thus serve as a versatile, fast and reliable tool for screening purposes in all research areas applying SPAAC reactions.

Comprehensive study on critical micellar concentrations of SDS in acetonitrile-water solvents.

The CMC is one of the fundamental characteristics of surfactants and its determination is crucial for detail understanding of micelles formation. In this study the CMC of SDS in presence of ACN was determined by two independent experimental techniques, capillary electrophoresis and fluorescence correlation spectroscopy (FCS). Yet, studies of SDS micellization in solutions containing ACN as organic modifier are sparse and inconsistent in literature. The measurements were performed for various ACN contents in the range of 0-50% v/v. At ACN contents of up to 10% v/v the CMC is lower when compared to the aqueous solution, while increasing ACN content causes a significant increase of the CMC. Formation of micelles was observed up to ACN concentrations of 35% v/v, which is in contrast to most of the reports in literature. Based on the results of the FCS experiments, we were able to confirm that presence of ACN causes a gradual increase of the size of the micelles with increasing concentration of SDS. Simultaneously, we proved that the classical conductivity approach for the determination of the CMC does not yield reliable results in the presence of higher content of an organic modifier such as ACN.