Degradation of antibiotic ciprofloxacin by different AOP systems using electrochemically generated hydrogen peroxide.

The present work reports the degradation of the antibiotic ciprofloxacin (CIP) by different advanced oxidative process systems (UV; Anodic Oxidation; H2O2; H2O2/UV; H2O2/Fe2+ and H2O2/UV/Fe2+) in an electrochemical cell using gas diffusion electrode (GDE) for the synthesis of hydrogen peroxide. CIP degradation and mineralization were evaluated by high efficiency liquid chromatography (HPLC) and total organic carbon (TOC) techniques. Of all the systems investigated, the photoelectro-Fenton system presented the best degradation efficiency; this system promoted highly significant mineralization percentages of 54.8% and 84.6% in 90 and 360 min, and relatively lower energy consumption rates of 4110.0 and 9808.2 kWh kg-1 TOC, respectively. In 6 h period of experiment, the main degradation products of ciprofloxacin were identified, and the aliphatic acids obtained helped confirm the rupture of the aromatic ring. The application of the photoelectro-Fenton process with in situ eletroctrogeneration of H2O2 using GDE has proved to be suitably promising for the treatment of organic pollutants.

Mechanistic proposal for the electrochemical and sonoelectrochemical oxidation of thiram on a boron-doped diamond anode.

A comparative study was carried out of sonochemical (SCh), electrochemical (ECh) and sonoelectrochemical (SECh) strategies for the degradation of the fungicide thiram in dilute aqueous solution. The SCh and SECh studies were performed using a sonicator equipped with an 11 mm titanium-alloy probe and operated at 20 kHz with a power intensity of 523 W cm(-2). In the ECh and SECh investigations, galvanostatic electrolyses were implemented using a single compartment electrochemical cell with a boron-doped diamond electrode as anode and applied current densities in the range 10-50 mA cm(-2). For these processes, the decrease in concentration of thiram was monitored by high performance liquid chromatographic (HPLC) analysis and values of current efficiency and energy consumption were determined. The results showed that the rate of degradation of thiram and the amount of energy consumed were directly proportional to the applied current density, while current efficiency was inversely related to current density. The kinetics of thiram degradation followed a pseudo first order model with apparent rate constants in the region of 10(-3)min(-1). Thiram in aqueous solution was subjected to "exhaustive" degradation by ECh and SECh processes for 5h at applied current densities of 35 mA cm(-2) and the intermediates/byproducts so-formed were identified by HPLC-mass spectrometry. Mechanisms of the degradation reactions have been proposed on the basis of the results obtained.

Route of electrochemical oxidation of the antibiotic sulfamethoxazole on a mixed oxide anode.

The appearance of pharmaceutical compounds and their bioactive transformation products in aquatic environments is becoming an issue of increasing concern. In this study, the electrochemical oxidation of the widely used antibiotic sulfamethoxazole (SMX) was investigated using a commercial mixed oxide anode (Ti/Ru0.3Ti0.7O2) and a single compartment filter press-type flow reactor. The kinetics of SMX degradation was determined as a function of electrolyte composition, applied current density, and initial pH. Almost complete (98 %) degradation of SMX could be achieved within 30 min of electrolysis in 0.1 mol L(-1) NaCl solution at pH 3 with applied current densities ≥20 mA cm(-2). Nine major intermediates of the reaction were identified by LC-ESI-Q-TOF-MS (e.g., C6H9NO2S (m/z = 179), C6H4NOCl (m/z = 141), and C6H6O2 (m/z = 110)). The degradation followed various routes involving cleavage of the oxazole and benzene rings by hydroxyl and/or chlorine radicals, processes that could occur before or after rupture of the N-S bond, followed by oxidation of the remaining moieties. Analysis of the total organic carbon content revealed that the antibiotic was partially mineralized under the conditions employed and some inorganic ions, including NO3 (-) and SO4 (2-), could be identified. The results presented herein demonstrate the efficacy of the electrochemical process using a Ti/Ru0.3Ti0.7O2 anode for the remediation of wastewater containing the antibiotic SMX.

Electrochemical and sonoelectrochemical processes applied to amaranth dye degradation.

Amaranth dye is an organic compound largely used in the food and beverage industries with potential toxicity effects on humans. It can be found as a pollutant species in aquatic environments and has been classified as an endocrine disruptor. This study describes amaranth degradation upon ultrasonication associated with an electrochemical system that uses a boron-doped diamond anode BDD, defined as a sonoelectrochemical process. Ninety-minute electrolyses were performed using current densities in the 10-50 mA cm(-2) range, and the concentration decay, pH, energy and current efficiencies, as well as the discoloration rate were evaluated. The amaranth concentration decayed as a function of electrolysis time and the reactions obeyed pseudo first-order kinetics, with an apparent constant rate between 10(-1) and 10(-3)min(-1). The electrochemical and sonoelectrochemical processes at 35 mA cm(-2) yielded TOC removal values between 92.1% and 95.1% respectively, after 90 min. Current efficiency values obtained for both processes were 18.2% and 23.6%. Exhaustive 5h electrolysis was performed and the degradation products were identified by HPLC-MS. A mechanism for the degradation of amaranth was proposed based on an analysis of the aromatic and aliphatic intermediates.