[An update on clinical gait analysis : Current developments and applications]. / Update klinische Ganganalyse : Aktuelle Entwicklungen und Einsatzmöglichkeiten.

The objective acquisition and assessment of joint movements and loads using instrumented gait analysis has become an established tool in clinical diagnostics. In particular, marker-based 3D gait analyses make use of an increasingly comprehensive database for the assessment of orthopaedic or neurological questions. Based on this data and medical-scientific experience, increasingly reliable approaches and evaluation strategies are emerging, which also draw on methods from artificial intelligence and musculoskeletal modelling. This article focusses on marker-based gait analyses of the lower extremity (hip, knee, foot) and how these can be used in a clinically relevant way using current methods, e.g. for determining indications or optimization of surgical planning. Finally, current developments and applications by using alternative methods from sensor technology and optical motion capture will be briefly discussed.

Validation of central peak height method for final adult height predictions on long leg radiographs.

Aims: Accurate skeletal age and final adult height prediction methods in paediatric orthopaedics are crucial for determining optimal timing of growth-guiding interventions and minimizing complications in treatments of various conditions. This study aimed to evaluate the accuracy of final adult height predictions using the central peak height (CPH) method with long leg X-rays and four different multiplier tables. Methods: This study included 31 patients who underwent temporary hemiepiphysiodesis for varus or valgus deformity of the leg between 2014 and 2020. The skeletal age at surgical intervention was evaluated using the CPH method with long leg radiographs. The true final adult height (FHTRUE) was determined when the growth plates were closed. The final height prediction accuracy of four different multiplier tables (1. Bayley and Pinneau; 2. Paley et al; 3. Sanders - Greulich and Pyle (SGP); and 4. Sanders - peak height velocity (PHV)) was then compared using either skeletal age or chronological age. Results: All final adult height predictions overestimated the FHTRUE, with the SGP multiplier table having the lowest overestimation and lowest absolute deviation when using both chronological age and skeletal age. There were no significant differences in final height prediction accuracy between using skeletal age and chronological age with PHV (p = 0.652) or SGP multiplier tables (p = 0.969). Adult height predictions with chronological age and SGP (r = 0.769; p ≤ 0.001), as well as chronological age and PHV (r = 0.822; p ≤ 0.001), showed higher correlations with FHTRUE than predictions with skeletal age and SGP (r = 0.657; p ≤ 0.001) or skeletal age and PHV (r = 0.707; p ≤ 0.001). Conclusion: There was no significant improvement in adult height prediction accuracy when using the CPH method compared to chronological age alone. The study concludes that there is no advantage in routinely using the CPH method for skeletal age determination over the simple use of chronological age. The findings highlight the need for more accurate methods to predict final adult height in contemporary patient populations.

Influence of tension-band plates on the mechanical loading of the femoral growth plate during guided growth due to coronal plane deformities.

Introduction: Correction of knee malalignment by guided growth using a tension-band plate is a common therapy to prevent knee osteoarthritis among other things. This approach is based on the Hueter-Volkmann law stating that the length growth of bones is inhibited by compression and stimulated by tension. How the locally varying mechanical loading of the growth plate is influenced by the implant has not yet been investigated. This study combines load cases from the gait cycle with personalized geometry in order to investigate the mechanical influence of the tension-band plates. Methods: Personalized finite element models of four distal femoral epiphyses of three individuals, that had undergone guided growth, were generated. Load cases from the gait cycles and musculoskeletal modelling were simulated with and without implant. Morphological features of the growth plates were obtained from radiographs. 3D geometries were completed using non-individual Magnetic Resonance Images of age-matched individuals. Boundary conditions for the models were obtained from instrumented gait analyses. Results: The stress distribution in the growth plate was heterogenous and depended on the geometry. In the insertion region, the implants locally induced static stress and reduced the cyclic loading and unloading. Both factors that reduce the growth rate. On the contralateral side of the growth plate, increased tension stress was observed, which stimulates growth. Discussion: Personalized finite element models are able to estimate the changes of local static and cyclic loading of the growth plate induced by the implant. In future, this knowledge can help to better control growth modulation and avoid the return of the malalignment after the treatment. However, this requires models that are completely participant-specific in terms of load cases and 3D geometry.

Factors for Prolonged Pain and Restriction of Movement Following Hemiepiphysiodesis Plating for the Correction of Lower Limb Malalignment in the Frontal Plane: An Explorative Analysis.

The correction of valgus leg malalignment in children using implant-mediated growth guidance is widely used and effective. Despite the minimal invasive character of the procedure, a relevant number of patients sustain prolonged pain and limited mobility after temporary hemiepiphysiodesis. Our aim was to investigate implant-associated risk factors (such as implant position and screw angulation), surgical- or anesthesia-related risk factors (such as type of anesthesia, use, and duration), and pressure of tourniquet or duration of surgery for these complications. Thirty-four skeletally immature patients with idiopathic valgus deformities undergoing hemiepiphysiodesis plating from October 2018-July 2022 were enrolled in this retrospective study. Participants were divided into groups with and without prolonged complications (persistent pain, limited mobility of the operated knee between five weeks and six months) after surgery. Twenty-two patients (65%) had no notable complications, while twelve patients (35%) had prolonged complications. Both groups differed significantly in plate position relative to physis (p = 0.049). In addition, both groups showed significant differences in the distribution of implant location (p = 0.016). Group 1 had a shorter duration of surgery than group 2 (32 min vs. 38 min, p = 0.032) and a lower tourniquet pressure (250 mmHg vs. 270 mmHg, p = 0.019). In conclusion, simultaneous plate implantation at the femur and tibia and metaphyseal plate positioning resulted in prolonged pain and a delay of function. In addition, the amplitude of tourniquet pressure or duration of surgery could play a factor.

Characterization of Postural Sway in Women with Osteoporosis and a Control Group by Means of Linear and Nonlinear Methods.

The mechanisms underlying the altered postural control and risk of falling in patients with osteoporosis are not yet fully understood. The aim of the present study was to investigate postural sway in women with osteoporosis and a control group. The postural sway of 41 women with osteoporosis (17 fallers and 24 non-fallers) and 19 healthy controls was measured in a static standing task with a force plate. The amount of sway was characterized by traditional (linear) center-of-pressure (COP) parameters. Structural (nonlinear) COP methods include spectral analysis by means of a 12-level wavelet transform and a regularity analysis via multiscale entropy (MSE) with determination of the complexity index. Patients showed increased body sway in the medial-lateral (ML) direction (standard deviation in mm: 2.63 ± 1.00 vs. 2.00 ± 0.58, p = 0.021; range of motion in mm: 15.33 ± 5.58 vs. 10.86 ± 3.14, p = 0.002) and more irregular sway in the anterior-posterior (AP) direction (complexity index: 13.75 ± 2.19 vs. 11.18 ± 4.44, p = 0.027) relative to controls. Fallers showed higher-frequency responses than non-fallers in the AP direction. Thus, postural sway is differently affected by osteoporosis in the ML and AP directions. Clinically, effective assessment and rehabilitation of balance disorders can benefit from an extended analysis of postural control with nonlinear methods, which may also contribute to the improvement of risk profiles or a screening tool for the identification of high-risk fallers, thereby prevent fractures in women with osteoporosis.

Peak knee joint moments accurately predict medial and lateral knee contact forces in patients with valgus malalignment.

Compressive knee joint contact force during walking is thought to be related to initiation and progression of knee osteoarthritis. However, joint loading is often evaluated with surrogate measures, like the external knee adduction moment, due to the complexity of computing joint contact forces. Statistical models have shown promising correlations between medial knee joint contact forces and knee adduction moments in particularly in individuals with knee osteoarthritis or after total knee replacements (R2 = 0.44-0.60). The purpose of this study was to evaluate how accurately model-based predictions of peak medial and lateral knee joint contact forces during walking could be estimated by linear mixed-effects models including joint moments for children and adolescents with and without valgus malalignment. Peak knee joint moments were strongly correlated (R2 > 0.85, p < 0.001) with both peak medial and lateral knee joint contact forces. The knee flexion and adduction moments were significant covariates in the models, strengthening the understanding of the statistical relationship between both moments and medial and lateral knee joint contact forces. In the future, these models could be used to evaluate peak knee joint contact forces from musculoskeletal simulations using peak joint moments from motion capture software, obviating the need for time-consuming musculoskeletal simulations.

Intra- and interobserver reliability analysis of pediatric lower limb parameters on digital long leg radiographs.

BACKGROUND: Malalignments of the lower extremity are common reasons for orthopedic consultation because it may lead to osteoarthritis in adulthood. An accurate and reliable radiological assessment of lower limb alignment in children and adolescents is essential for clinical decision-making on treatment of limb deformities and for regular control after a surgical intervention. OBJECTIVE: First, does the analysis of full-length standing anteroposterior radiographs show a good intra- and interobserver reliability? Second, which parameter is most susceptible to observer-dependent errors? Third, what is the Standard Error of Measurement (SEM95%) of the absolute femoral and tibial length? METHODS: Two observers evaluated digital radiographs of 144 legs from 36 children and adolescents with pathological valgus alignment before a temporary hemiepiphysiodesis and before implant removal. Parameters included Mechanical Femorotibial Angle (MFA), Mechanical Axis Deviation (MAD), mechanical Lateral Distal Femoral Angle (mLDFA), mechanical Medial Proximal Tibial Angle (mMPTA), mechanical Lateral Proximal Femoral Angle (mLPFA), mechanical Lateral Distal Tibial Angle (mLDTA), Joint Line Convergence Angle (JLCA), femur length, tibial length. Intra- and interobserver reliability (ICC2,1), SEM95% and proportional errors were calculated. RESULTS: The intra- and interobserver reliability for almost all measurements was found to be good to excellent (Intra-ICC2,1: 0.849-0.999; Inter-ICC2,1: 0.864-0.996). The SEM95% of both observers was found to be ± 1.39° (MFA), ± 3.31 mm (MAD), ± 1.06° (mLDFA) and ± 1.29° (mMPTA). The proportional error of MAD and MFA is comparable (47.29% vs. 46.33%). The relevant knee joint surface angles show a lower proportional error for mLDFA (42.40%) than for mMPTA (51.60%). JLCA has a proportional error of 138%. Furthermore, the SEM95% for the absolute values of the femoral and tibial length was 4.53 mm for the femur and 3.12 mm for the tibia. CONCLUSIONS: In conclusion, a precise malalignment measurement and the knowledge about SEM95% of the respective parameters are crucial for correct surgical or nonsurgical treatment. The susceptibility to error must be considered when interpreting malalignment analysis and must be considered when planning a surgical intervention. The results of the present study elucidate that MAD and MFA are equally susceptible to observer-dependent errors. This study shows good to excellent intra- and interobserver ICCs for all leg alignment parameters and joint surface angles, except for JLCA. TRIAL REGISTRATION: This study was registered with DRKS (German Clinical Trials Register) under the number DRKS00015053. LEVEL OF EVIDENCE: I, Diagnostic Study.

Influence of implantation of a total hip endoprosthesis on the ipsilateral leg alignment: the effect of sex and dysplasia of the hip.

INTRODUCTION: Differences in leg and hip morphology exist between sexes and developmental hip dysplasia is known to alter proximal femoral morphology. The purpose of this study was to determine whether existing differences in leg alignment due to sex or developmental hip dysplasia have an effect on changes in leg alignment after total hip arthroplasty. MATERIALS AND METHODS: 30 hip osteoarthritis patients underwent biplanar full-length radiography in the standing position preoperatively and 3 months after total hip arthroplasty. Differences in leg alignment between men and women and between patients with primary hip osteoarthritis and patients with developmental dysplasia before and after surgery were tested using a general linear model for repeated measures. RESULTS: Implantation of a hip prosthesis had no differential effect on ipsilateral leg alignment in patients with hip osteoarthritis due to dysplasia and in patients with primary hip osteoarthritis. However, patients with hip osteoarthritis due to dysplasia had a 2.1° higher valgus both before and after surgery. After total hip arthroplasty, women had a significantly greater increase in varus angle (1.6° vs. 0°) and femoral offset (10.5 vs. 4.6 mm) compared with men. Because the change in acetabular offset was smaller (2.2 vs. 6.2 mm), the global femoral offset was only increased in women. Femoral torsion was constant for men (15.0° and 16.5°), whereas femoral torsion was significantly reduced in women (19.9° and 13.2°). CONCLUSIONS: Hip arthroplasty has a greater effect on leg axis in women than in men. The axial leg alignment of women could change from a natural valgus to a varus alignment. Therefore, surgeons should consider the effects of total hip arthroplasty on leg alignment in patients with hip osteoarthritis. Whether these changes in leg alignment are also clinically relevant and lead to premature medial or lateral knee osteoarthritis should be investigated in future work. TRIAL REGISTRATION: This study was registered with DRKS (German Clinical Trials Register) under the number DRKS00015053. Registered 1st of August 2018.

Frontal plane knee moment in clinical gait analysis: A systematic review on the effect of kinematic gait changes.

INTRODUCTION: The frontal plane knee moment (KAM1 and KAM2) derived from non-invasive three-dimensional gait analysis is a surrogate measure for knee joint load and of great interest in clinical and research settings. Many aspects can influence this measure either unintentionally or purposely in order to reduce the knee joint load to relieve symptoms and pain. All these aspects must be known when conducting a study or interpreting gait data for clinical decision-making. METHODS: This systematic review was registered with PROSPERO (CRD42020187038). Pubmed and Web of Science were searched for peer-reviewed, original research articles in which unshod three-dimensional gait analysis was undertaken and KAM1 and KAM2 were included as an outcome variable. Two reviewers independently screened articles for inclusion, extracted data and performed a methodological quality assessment using Downs and Black checklist. RESULTS: In total, 42 studies were included. Based on the independent variable investigated, these studies were divided into three groups: 1) gait modifications, 2) individual characteristics and 3) idiopathic orthopedic deformities. Among others, fast walking speeds (1) were found to increase KAM1; There were no sex-related differences (2) and genu valgum (3) reduces KAM1 and KAM2. CONCLUSION: While consistent use of terminology and reporting of KAM is required for meta-analysis, this review indicates that gait modifications (speed, trunk lean, step width), individual characteristics (body weight, age) and idiopathic orthopedic deformities (femoral or tibial torsion, genu valgum/varum) influence KAM magnitudes during walking. These factors should be considered by researchers when designing studies (especially of longitudinal design) or by clinicians when interpreting data for surgical and therapeutic decision-making.

Effect of unplanned athletic movement on knee mechanics: a systematic review with multilevel meta-analysis.

OBJECTIVE: To compare the effects of pre-planned and unplanned movement tasks on knee biomechanics in uninjured individuals. DESIGN: Systematic review with meta-analysis. DATA SOURCES: Five databases (PubMed, Google Scholar, Cochrane Library, ScienceDirect and Web of Science) were searched from inception to November 2020. Cross-sectional, (randomised) controlled/non-controlled trials comparing knee angles/moments of pre-planned and unplanned single-leg landings/cuttings were included. Quality of evidence was assessed using the tool of the Grading of Recommendations Assessment, Development and Evaluation working group. METHODS: A multilevel meta-analysis with a robust random-effects meta-regression model was used to pool the standardised mean differences (SMD) of knee mechanics between pre-planned and unplanned tasks. The influence of possible effect modifiers (eg, competitive performance level) was examined in a moderator analysis. RESULTS: Twenty-five trials (485 participants) with good methodological quality (Downs and Black) were identified. Quality of evidence was downgraded due to potential risk of bias (eg, confounding). Moderate-quality evidence indicates that unplanned tasks evoked significantly higher external knee abduction (SMD: 0.34, 95% CI: 0.16 to 0.51, 14 studies) and tibial internal rotation moments (SMD: 0.51, 95% CI: 0.23 to 0.79, 11 studies). No significant between-condition differences were detected for sagittal plane mechanics (p>0.05). According to the moderator analysis, increased abduction moments particularly occurred in non-professional athletes (SMD: 0.55, 95% CI: 0.14 to 0.95, 5 studies). CONCLUSION: Unplanned movement entails higher knee abduction and tibial internal rotation moments, which could predispose for knee injury. Exercise professionals designing injury-prevention protocols, especially for non-elite athletes, should consider the implementation of assessments and exercises requiring time-constrained decision-making. PROSPERO REGISTRATION NUMBER: CRD42019140331.

Impact of subject-specific step width modification on the knee and hip adduction moments during gait.

BACKGROUND: Patients with hip osteoarthritis (OA) exhibit an increased step width (SW) during walking before and up to 2 years after total hip arthroplasty. Wider SW is associated with a reduction in the external knee adduction moment (KAM), but there is a lack of research regarding the effect of SW on the hip adduction moment (HAM). RESEARCH QUESTION: Is a wider SW an effective compensatory mechanism to reduce the hip joint loading? We hypothesized that (1) an increased SW reduces, (2) a decreased SW increases the KAM/HAM, and (3) secondary kinematic gait changes have an effect on the KAM/HAM. METHODS: Twenty healthy individuals (24.0 ± 2.5 years of age) underwent instrumented gait analyses with 4 different subject-specific SW modifications (habitual, halved, double, and triple SW). The resulting external KAMs and HAMs were compared using statistical parametric mapping (SPM). RESULTS: Post hoc testing demonstrated significantly lower HAM for both the double (p < 0.001, 15-31 % and 61-98 % of the stance phase) and the triple SW (p < 0.001, 1-36 % and 58-98 %) compared to the habitual SW. The extent of the reduction at the first and second peak was comparable for HAM (15-25 % reduction) and less pronounced at the first peak of KAM (9-11 % reduction) compared to the second peak of KAM (19-28 % reduction). In contrast, halving the SW did not lead to a significant change in KAM or HAM compared to the habitual SW (p > 0.009). SIGNIFICANCE: An increase in SW is an effective and simple gait mechanism to reduce the frontal plane knee and hip joint moments. However, hypothesis 2 could not be confirmed, as halving the SW did not cause a significant change in KAM or HAM. Given the results of the present study, gait retraining with regard to an increased SW may be an adequate, noninvasive option for the treatment of patients with hip OA.

Identification of Patients with Similar Gait Compensating Strategies Due to Unilateral Hip Osteoarthritis and the Effect of Total Hip Replacement: A Secondary Analysis.

Despite good clinical functional outcome, deficits in gait biomechanics exist 2 years after total hip replacement surgery. The aims of this research were (1) to group patients showing similar gait adaptations to hip osteoarthritis and (2) to investigate the effect of the surgical treatment on gait kinematics and external joint moments. In a secondary analysis, gait data of 51 patients with unilateral hip osteoarthritis were analyzed. A k-means cluster analysis was performed on scores derived via a principal component analysis of the gait kinematics. Preoperative and postoperative datasets were statistically tested between clusters and 46 healthy controls. The first three principal components incorporated hip flexion/extension, pelvic tilt, foot progression angle and thorax tilt. Two clusters were discriminated best by the peak hip extension during terminal stance. Both clusters deviated from healthy controls in spatio-temporal, kinematic and kinetic parameters. The cluster with less hip extension deviated significantly more. The clusters improved postoperatively but differences to healthy controls were still present one year after surgery. A poor preoperative gait pattern in patients with unilateral hip osteoarthritis is associated with worse gait kinematics after total hip replacement. Further research should focus on the identification of patients who can benefit from an adapted or individualized rehabilitation program.

[Axial deformities of the lower extremity in the frontal plane : From physiological development to pathological and possible long-term consequences]. / Achsdeformitäten der unteren Extremität in der Frontalebene : Von der physiologischen Entwicklung zum Pathologischen und zu möglichen Langzeitfolgen.

BACKGROUND: From birth to the end of growth, leg axes undergo physiological changes. Congenital, idiopathic or secondary deformities of the lower extremities are considered as a pre-arthrosis. A detailed clinical examination is of primary importance. On the basis of the established preventive examinations, predominantly asymptomatic deformities can be distinguished from age-typical physiological axis deviations at an early stage. THERAPY: There is a variety of conservative and surgical therapy options. In most cases, the spontaneous course of development can be waited for, depending on the deformity and the associated restrictions. It is important to recognize the right time for an intervention. Usually, surgical interventions are necessary, including guided growth by permanent and partial arrest of the growth plate or osteotomies. The aim is to restore the anatomical axial alignment and thus prevent the development of osteoarthritis. A missed intervention often leads to an early endoprosthetic replacement in adulthood.

[Dynamic analysis of joint loading due to leg axis deformity in the frontal plane : Relevance of instrumented gait analysis]. / Dynamische Analyse der Gelenkbelastung bei Beinachsendeformitäten in der Frontalebene : Stellenwert der instrumentellen Ganganalyse.

BACKGROUND: Instrumented 3D gait analysis (IGA) has been established for the functional evaluation of orthopedic diseases. It can provide valuable additional information beyond conventional static radiographic diagnostics and, thus, contributes to treatment decisions and a successful surgical outcome. Regarding the assessment of leg axis deformities IGA is currently only used in a few specialized centers. PRACTICE: This article describes the methods used by IGA and shows its benefit for the treatment of leg axis deformities of the knee in the frontal plane. In particular, the calculation of dynamic joint loads provides important insights regarding the development of degenerative joint deformities in the knee joint and, thus, complements the static assessment of the leg axis. A new treatment algorithm for guided growth intervention in children and adolescents by temporary epiphysiodesis is presented. IGA can be particularly useful for clinical decision-making in borderline cases. If there is a discrepancy between the static leg axis and dynamic knee joint loading, IGA can reveal potential compensatory mechanisms during walking.

[Prevalence and predictors of rebound deformity in the frontal plane : A literature review]. / Häufigkeit und Prädiktoren für einen Rebound nach operativer Achskorrektur in der Frontalebene : Eine Literaturübersicht.

The present literature review presents the current state of the art on the prevalence and causes of the rebound phenomenon after successful correction of leg axis deformity using temporary epiphysiodesis in children and adolescents. A total of 20 studies was included by three independent reviewers. The validity of most studies regarding the rebound incidence is limited by a non-standardized follow-up after plate removal, heterogeneous patient groups with a small number of cases, and missing information on the definition of rebound. The rebound incidence in studies without fundamental limitations in study design is on an average about 50% and underlines the clinical relevance of the topic. Only four studies reported reasons or risk factors for the occurrence of a rebound. In particular, a young age at the beginning of treatment with high residual growth potential after implant removal represents an increased rebound risk, which can be minimized by appropriate overcorrection of the leg axis.

Accuracy of Preoperative Templating in Total Hip Arthroplasty With Special Focus on Stem Morphology: A Randomized Comparison Between Common Digital and Three-Dimensional Planning Using Biplanar Radiographs.

BACKGROUND: Accurate preoperative planning is a key component of successful total hip arthroplasty (THA). The purpose of the present study was to compare the accuracy and reliability of three-dimensional (hipEOS) and common digital two-dimensional (TraumaCad) templating with special focus on stem morphology. METHODS: 51 patients undergoing THA were randomized to two groups. Preoperative planning was performed on 23 patients with hipEOS (3D) and on 28 patients with TraumaCad (2D) planning software. Planning results were compared with the implanted component size. Inter- and intraobserver reliability as well as planning accuracy of both planning methods with special focus on straight and short stem design were recorded. RESULTS: Intraobserver reliability of both planning methods was good for component planning (ICC2,1: 0.835-0.967). Interobserver ICC2,1 for stem and cup planning were higher for 3D templating (3D ICC2,1: 0.906-0.918 vs. 2D ICC2,1: 0.835-0.843). Total stem and cup size predictions were within 2 sizes for 3D and within 3 sizes for 2D planning. Comparing short stem planning accuracy of both planning methods, absolute difference between implanted and planned component size was significantly lower in 3D planning (P = .029). There was no significant difference in straight stem (P = .935) and cup (P = .954) planning accuracy. CONCLUSION: Our findings suggest that 3D templating with hipEOS software has a good overall reliability and may have a better planning accuracy of short stem prostheses than digital templating with TraumaCad software. Assuming that the number of implanted short stem prostheses will further increase in coming years, a more precise planning with 3D technique can contribute to improve surgery outcome.

A Systematic Review of the Associations Between Inverse Dynamics and Musculoskeletal Modeling to Investigate Joint Loading in a Clinical Environment.

The assessment of knee or hip joint loading by external joint moments is mainly used to draw conclusions on clinical decision making. However, the correlation between internal and external loads has not been systematically analyzed. This systematic review aims, therefore, to clarify the relationship between external and internal joint loading measures during gait. A systematic database search was performed to identify appropriate studies for inclusion. In total, 4,554 articles were identified, while 17 articles were finally included in data extraction. External joint loading parameters were calculated using the inverse dynamics approach and internal joint loading parameters by musculoskeletal modeling or instrumented prosthesis. It was found that the medial and total knee joint contact forces as well as hip joint contact forces in the first half of stance can be well predicted using external joint moments in the frontal plane, which is further improved by including the sagittal joint moment. Worse correlations were found for the peak in the second half of stance as well as for internal lateral knee joint contact forces. The estimation of external joint moments is useful for a general statement about the peak in the first half of stance or for the maximal loading. Nevertheless, when investigating diseases as valgus malalignment, the estimation of lateral knee joint contact forces is necessary for clinical decision making because external joint moments could not predict the lateral knee joint loading sufficient enough. Dependent on the clinical question, either estimating the external joint moments by inverse dynamics or internal joint contact forces by musculoskeletal modeling should be used.

Knee Load Distribution in Hip Osteoarthritis Patients After Total Hip Replacement.

Reduced external knee adduction moments in the second half of stance after total hip replacement have been reported in hip osteoarthritis patients. This reduction is thought to shift the load from the medial to the lateral knee compartment and as such increase the risk for knee osteoarthritis. The knee adduction moment is a surrogate for the load distribution between the medial and lateral compartments of the knee and not a valid measure for the tibiofemoral contact forces which are the result of externally applied forces and muscle forces. The purpose of this study was to investigate whether the distribution of the tibiofemoral contact forces over the knee compartments in unilateral hip osteoarthritis patients 1 year after receiving a primary total hip replacement differs from healthy controls. Musculoskeletal modeling on gait was performed in OpenSim using the detailed knee model of Lerner et al. (2015) for 19 patients as well as for 15 healthy controls of similar age. Knee adduction moments were calculated by the inverse dynamics analysis, medial and lateral tibiofemoral contact forces with the joint reaction force analysis. Moments and contact forces of patients and controls were compared using Statistical Parametric Mapping two-sample t-tests. Knee adduction moments and medial tibiofemoral contact forces of both the ipsi- and contralateral leg were not significantly different compared to healthy controls. The contralateral leg showed 14% higher medial tibiofemoral contact forces compared to the ipsilateral (operated) leg during the second half of stance. During the first half of stance, the lateral tibiofemoral contact force of the contralateral leg was 39% lower and the ratio 32% lower compared to healthy controls. In contrast, during the second half of stance the forces were significantly higher (39 and 26%, respectively) compared to healthy controls. The higher ratio indicates a changed distribution whereas the increased lateral tibiofemoral contact forces indicate a higher lateral knee joint loading in the contralateral leg in OA patients after total hip replacement (THR). Musculoskeletal modeling using a detailed knee model can be useful to detect differences in the load distribution between the medial and lateral knee compartment which cannot be verified with the knee adduction moment.