High insertion torque versus regular insertion torque: early crestal bone changes on dental implants in relation to primary stability-a retrospective clinical study.

The aim of the presented retrospective study was to evaluate the early crestal bone changes around an implant type designed for high primary stability. A total number of 111 implants placed clinically were evaluated regarding insertion torque, bone density, implant stability quotient (ISQ) and early crestal bone loss from standardized digital radiographs. The implants were allocated in two groups: the "regular torque " group contained all implants that achieved less than 50 Ncm as final insertion torque (n = 63) and the "high torque" group contained the implants that achieved 50-80 Ncm (n = 48). To avoid possible damage either to the implant´s inner connection or to the bone by application of excessive force, a limit of 80 Ncm was set for all surgeries. All implants underwent submerged healing for three months. ISQ measurements and standardized digital radiographs were taken at day of insertion and at day of second stage surgery. The bone loss was measured on the mesial and distal aspect of the implant. The data evaluation showed the following results: Mean bone loss was 0.27 ± 0.30 mm for the high torque group and 0.24 ± 0.27 mm for the regular torque group. The difference was not statistically significant (p = 0.552). In the two groups, no complications nor implant loss occurred. For the evaluated implant type, there was no significant difference in crestal bone changes and complication rate between high and regular insertion torque in the early healing period.

Clinical performance and risk factors of all-ceramic screw-retained implant crowns in the posterior region based on a retrospective investigation.

OBJECTIVES: Clinical data on all-ceramic screw-retained implant crowns (SICs) luted on titanium base abutments (TBAs) over more than 3 years are sparse. This study aimed to evaluate the clinical performance and potential risk factors for these restorations. MATERIALS AND METHODS: Analysis took place based on the medical patient-records of three dental offices. Implant survival and prosthetic complications over time were evaluated. The study included SICs in premolar and molar regions made from monolithic lithium disilicate ceramic (M_LiDi) or veneered zirconia (V_ZiO) luted on a TBA documented over an observation time of at least 3 years. Survival and complication rates were calculated and compared by a log-rank test. Cox-Regressions were used to check potential predictors for the survival (p < .05). RESULTS: Six hundred and one crowns out of 371 patients met the inclusion criteria and follow-up period was between 3.0 and 12.9 (mean: 6.4 (SD: 2.1)) years. Over time, six implants had to be removed and 16 restorations had to be refabricated. The estimated survival rates over 10 years were 93.5% for M_LiDi and 95.9% for V_ZiO and did not differ significantly among each other (p = .80). However, V_ZiO showed significantly higher complication rates (p = .003). Material selection, sex, age, and implant diameter did not affect the survival of investigated SICs but crown height influences significantly the survival rate (hazard ratio, HR = 1.26 (95%CI: 1.08, 1.49); p = .043). CONCLUSIONS: Screw-retained SICs luted on TBAs that were fabricated from monolithic lithium disilicate ceramic or veneered zirconia showed reliable and similar survival rates. Increasing crown heights reduced survival over the years.

Monolithic hybrid abutment crowns: Influence of crown height, crown morphology and material on the implant-abutment complex.

PURPOSE: This in vitro study investigated the influence of material selection, crown morphology, and vertical crown height on the biomechanical behavior of monolithic hybrid abutment crowns (HACs). METHODS: Ninety implants were embedded in accordance with ISO standard 14801; ninety HACs were mounted (N=90). Monolithic crowns with varying group-specific designs were luted using titanium bases. HACs were fabricated from monolithic lithium disilicate ceramic (LD) or zirconia-reinforced lithium silicate ceramic (ZLS). The crown morphology was either maxillary premolar (LD_PM, ZLS_PM) or molar (LD_MO). The three groups were further divided into three subgroups of ten specimens, each designed with a small (7.5 mm), middle (10.5 mm), and high (13.5 mm) configuration of crown heights (N=10). A load-to-failure test at 30° off-axis was conducted using a universal testing machine until failure. For statistical analysis, Kolmogorov-Smirnov and Mann-Whitney U tests were conducted (P < 0.05). RESULTS: All LD_MO groups presented the highest failure values (808.7 to 947.9 N), followed by the LD_PM (525.8 to 722.8 N) and ZLS_PM groups (312.6 to 478.8N). A comparison between LD and ZLS materials (P < 0.001) as well as the crown morphology (P < 0.001) showed significant differences in failure values. The values in the subgroups of ZLS_PM (low, middle, high) decreased as the crown height increased. The fracture modes showed no consistent patterns across the test groups. CONCLUSIONS: Material selection, crown morphology, and vertical crown height appear to be important factors that may influence the clinical failure values and patterns of HACs.

CAD/CAM full-mouth rehabilitation of an elderly patient: One-piece digital complete denture meets multilayered zirconia with gradient technology.

OBJECTIVE: This article highlights a CAD/CAM complete-mouth rehabilitation in an 82-year-old patient by means of a complete maxillary prosthesis and mandibular implant- and tooth-supported fixed restorations made from multilayered zirconia. CLINICAL CONSIDERATIONS: Comprehensive complete-mouth rehabilitations in elderly patients with adaptation of the occlusal vertical dimension (OVD) often present particular challenges. This applies especially when exacting functional and esthetic requirements are to be met and the treatment should not cause the patient too much effort, still ensuring the highest level of quality and efficiency and a low intervention rate. CONCLUSION: The digital approach used for the present patient allowed for an efficient treatment procedure, facilitated virtual evaluations using a face-scan, and enhanced the predictability of the prosthodontic outcome. The approach enabled some steps required in the conventional protocol to be omitted, resulting in a straightforward clinical treatment with minimal strain on the patient. CLINICAL SIGNIFICANCE: Because of the comprehensive recording of extraoral and intraoral data, for example with a facial scanner, it was possible to transfer a digital replica of the patient to the dental laboratory technician. With this protocol, many steps can be performed in the absence of the real patient.

Efficacy of Labial Split-Thickness Eversion Periosteoplasty for Soft Tissue Management in Posterior Mandibular Horizontal Ridge Augmentation Procedures: A Prospective Clinical Study.

Purpose: To evaluate the efficacy of split-thickness labial eversion periosteoplasty (EPP) for soft tissue closure in horizontal ridge augmentation of posterior mandibular regions using a bone shell onlay grafting technique. Materials and Methods: Sixteen patients (12 female and 4 male; mean age: 46.2 ± 8.7 years) with 18 horizontal bone defects in posterior mandibular regions were included for lateral onlay bone grafting using the bone shell technique. After lateral bone augmentation, the EPP was used for soft tissue closure and was prospectively followed up for wound healing efficacy using a modified scoring index. The scoring index included dichotomous (yes: 0 / no: 1) evaluation of the following items: (1) bleeding on palpation or spontaneously, (2) tissue color difference, (3) presence of hematoma, (4) presence of granulation tissue, (5) incomplete incision margin closure, (6) dehiscence with visible augmentation material, (7) presence of exudation, and (8) presence of suppuration. In addition, a visual analog scale (VAS) was used to quantify and record the amount of pain and swelling (0 = no pain/swelling and 5 = severe pain/swelling); VAS scores of 0, 1, and 2 were rated as 1 in the dichotomous scoring index, and VAS scores of 3, 4, and 5 were rated as 0. A summarized wound healing score consisting of all 10 items was assessed at days 2, 7, and 14 and at months 1 and 4 postoperatively, including a comparison of the follow-up evaluations. Results: The summarized healing score increased significantly (P < .01) between day 2 (score: 6.6 ± 1.1) and day 7 (score: 8.9 ± 1.0) but showed little difference between day 14 (score: 9.6 ± 0.6) and the 1- and 4-month follow-ups (score: 10.0 ± 0). There was no wound dehiscence and no incomplete incision margin adaptation. For the individual parameters evaluated, bleeding on palpation, hematoma, and exudation were the most frequent side effects at day 2 at 50%, 100%, and 22.2%, respectively, and at day 7 at 16.7%, 55.6%, and 22.2%, respectively. The average pain score and the swelling/edema score were initially 4.0 ± 0 and 3.0 ± 0.77 on day 2, with a significant decrease (P < .001) by day 7 (pain: 2.0 ± 0; edema/swelling: 2.0 ± 0.59) and day 14 (pain: 1.0 ± 0.42; edema/swelling: 2.0 ± 0.79) and complete absence (score: 0) at months 1 and 4. Conclusions: Labial split-thickness EPP facilitates flap advancement and enables tight soft tissue coverage in large horizontal posterior mandibular bone augmentations as a result of offset double-layer wound closure. Although this procedure is shown to be surgically demanding, the postoperative complication rate may be reduced significantly.

In Vitro Survival and Fracture Force of Lithium-Disilicate Hybrid Abutment Crowns.

PURPOSE: To evaluate the behavior of hybrid abutment crowns fabricated from monolithic lithium disilicate ceramic (LDC) and to compare the influence of different in-vitro artificial aging protocols. MATERIAL AND METHODS: 32 monolithic hybrid abutment crowns of monolithic LDC were fabricated. 24 were artificially aged applying 3 different protocols up to a 20 year-simulation (1.2 × 106, 2.4 × 106, 4.8 × 106 chewing cycles, thermocycling), one control group underwent no artificial aging (N=32, n=8). Load-to-failure tests were conducted for all specimens and failure values were compared (p<0.05). RESULTS/CONCLUSIONS: All specimens passed in-vitro aging. Mean failure load values between 532.6 and 562.8 N were found but did neither differ significantly among the test groups nor from the control group. Within the limitations of this in-vitro pilot study, hybrid abutment crowns manufactured from monolithic LDC seem to offer appropriate long-lasting mechanical stability over a simulation period up to 20 years. The failure values and complication pattern seem to be independent of several aging protocols in this test set-up.

Clinical, radiographic, and histological/histomorphometric analysis of maxillary sinus grafting with deproteinized porcine or bovine bone mineral: A randomized clinical trial.

OBJECTIVE: The present study aimed to compare histomorphometrically evaluated new bone formation, radiographically measured graft stability, and clinical implant outcome between maxillary sinus grafting with either deproteinized porcine bone mineral (DPBM) or deproteinized bovine bone mineral (DBBM). MATERIALS AND METHODS: Thirty maxillary sinuses were initially included and randomly assigned to the test group (TG; DPBM, n = 15) or control group (CG; DBBM, n = 15). After a healing period (6 months), axially retrieved bone biopsies of the molar region were used for histological/histomorphometric analysis of new bone formations. Additionally, radiographically measured graft stability and clinical implant outcome were assessed. RESULTS: Twenty-three sinus sites with 10 sinuses of the TG and 13 of the CG were ultimately available for data and statistical analysis. In the TG, a slightly, but yet significantly (p = .040) higher proportion of new bone formation (TG: 27.7 ± 5.6% vs. CG: 22.9 ± 5.1%) and a lesser (p = .019) amount of connective (non-mineralized) tissue (TG: 47.5 ± 9.5% vs. CG: 56.1 ± 9.5%) was found than in the CG. However, both xenografts showed comparable (n.s.) residual bone graft (TG: 23.7 ± 7.2% vs. CG: 21.1 ± 9.85.6%), bone-to-graft contacts (TG: 26.2 ± 9.8% vs. CG: 30.8 ± 13.8%), similar graft height reduction over time (TG: 12.9 ± 6.7% CG: 12.4 ± 5.8%) and implant survival/success rate (100%). At the 3-year post-loading evaluation, the peri-implant marginal bone loss (TG: 0.52 ± 0.19 mm; CG: 0.48 ± 0.15 mm) and the peri-implant health conditions (TG: 87.5%/CG: 81.2%) did not differ between implants inserted in both xenografts used. CONCLUSIONS: The use of DPBM or DBBM for maxillary sinus augmentation is associated with comparable bone formation providing stable graft dimension combined with healthy peri-implant conditions.

Biomechanical behavior of implants with different diameters in relation to simulated bone loss- an in vitro study.

OBJECTIVES: Bone resorption around implants could influence the resistance of the implant abutment complex (IAC). The present in vitro study aimed to assess the stability to static fatigue of implants presenting different levels of bone losses and diameters. MATERIALS AND METHODS: Ninety implants with an internal conical connection with 3 different implant diameters (3.3 mm (I33), 3.8 mm (I38), and 4.3 mm (I43)) and 3 simulated bone loss settings (1.5 mm (I_15), 3.0 mm (I_30), and 4.5 mm (I_45) (n = 10)) were embedded and standard abutments were mounted. All specimens were artificially aged (1,200,000 cycles, 50 N, simultaneous thermocycling) and underwent subsequently load-to-fracture test. For statistical analysis, Kolmogorov-Smirnov test, Kruskal-Wallis test, and Mann-Whitney U test (p < 0.05) were applied. RESULTS: All test specimens withstood the artificial aging without damage. The mean failure values were 382.1 (± 59.2) N (I3315), 347.0 (± 35.7) N (I3330), 315.9 N (± 30.9) (I3345), 531.4 (± 36.2) N (I3815), 514.5 (± 40.8) N (I3830), 477.9 (± 26.3) N (I3845), 710.1 (± 38.2) N (I4315), 697.9 (± 65.2) N (I4330), and 662.2 N (± 45.9) (I4345). The stability of the IACs decreased in all groups when bone loss inclined. Merely, the failure load values did not significantly differ among subgroups of I43. CONCLUSIONS: Larger implant diameters and minor circular bone loss around the implant lead to a higher stability of the IAC. The smaller the implant diameter was, the more the stability was affected by the circumferential bone level. CLINICAL RELEVANCE: Preserving crestal bone level is important to ensure biomechanical sustainability at implant systems with a conical interface. It seems sensible to take the effect of eventual bone loss around implants into account during implant planning processes and restorative considerations.

Transsinusoidal lateral nasal floor augmentation for implant placement in the atrophic premaxilla: A within-patient, 5-year, prospective comparative study.

OBJECTIVES: To evaluate the clinical outcome for implants placed with transsinusoidal-lateral nasal cavity augmentation (NA) compared to implants placed in maxillary sinus augmentation (SA). MATERIALS AND METHODS: In 28 atrophic edentulous maxillary regions (14 patients bi-maxillary), a lateral window approach was used to perform transsinusoidal-lateral NA (TSLNA) combined with maxillary SA. After healing period of about 6 months, each patient received bimaxillary one anterior implant located in the pre-maxilla having lateral NA and 2-3 implants in the maxillary posterior region with SA. In a prospective follow-up evaluation, clinical implant outcome (survival/success rates) and peri-implant health (mucositis/peri-implantitis) were assessed and compared between implants placed in TSLNA (n = 28) and SA (n = 58). RESULTS: At the year-1, year-3, and year-5 evaluation, neither patient-based nor implant-based comparisons revealed differences for marginal bone level reduction between implants placed in TSLNA (5-year overall: 1.11 ± 0.26 mm) and SA (5-year overall: 1.07 ± 0.30 mm), although with a significant (p < .001) continuous reduction over the observation time. At the year-5 evaluation, all implants (n = 86) and restorations (n = 14) were still in situ (survival 100%) and showed an implant-based incidence of peri-implant mucositis/peri-implantitis of 14.3%/0% in TSLNA and 6.9%/3.4% in SA corresponding to 21.4%/0% and 28.6%/7.1% for implant-based evaluation. In addition, the implant success rate did not differ between NA and SA at implant- (100%/ 98.8%) and patient-based (100%/97.6%) evaluation. CONCLUSION: The findings obtained show TSLNA as an effective method for implant placement of adequate length and direction in the atrophic premaxilla providing for success rates comparable to those of implants placed in SA.

Forced surgical extrusion using an axial tooth extraction system as a practicable technique for preserving severely destroyed teeth? - Clinical outcomes up to 4.8 years.

OBJECTIVE: Several extrusion techniques have been described to restore teeth with insufficient coronal tooth structure and to avoid their extraction. Still, there is little evidence for a treatment concept combining surgical extrusion using an atraumatic axial extraction system. MATERIALS AND METHODS: A total of nine patients, each with an iso- or subgingival fractured tooth, were retrospectively examined. Treatment of the damaged tooth comprised an atraumatic forced surgical extrusion performed with an axial tooth extraction system and a more coronal positioning within the socket. The teeth were initially splinted and subsequently restored. The follow-up period was up to 57.1 months and averaged 36.5 (SD: ±13.5) months. RESULTS: All nine teeth were still in situ, without signs of inflammation. During the period of the provisional restoration, six prosthetic complications occurred, which were resolved with little effort, whereas, success rate for the definitive restoration was 100%. No biological complications were observed concerning the root apex or soft tissue. The radiographically measured mean extrusion distance was 3.4 (SD: ±1.0) mm, so that a sufficient prosthetic ferrule could be reestablished. CONCLUSIONS: Surgical extrusions using an axial tooth extraction system demonstrate low biological and prosthetic complications rates over observation time. CLINICAL SIGNIFICANCE: The presented extrusion approach preserves soft and hard tissue and is an efficient treatment option for severely destroyed teeth. Saving hopeless teeth by this relatively predictable and feasible procedure has hardly any disadvantages for patients, and in case of failure, an implant or fixed partial denture are still an option.

Influence of monolithic restorative materials on the implant-abutment interface of hybrid abutment crowns: An in vitro investigation.

Purpose This in vitro study aimed to investigate the long-term performance, stability, and fracture mode of monolithic hybrid abutment crowns, and the effect of different materials on the implant-abutment interface (IAI).Methods Eighty monolithic hybrid abutment crowns luted on titanium bases were manufactured from 3Y-TZP zirconia (ZY3), "Gradient Technology" zirconia (ZY35), 5Y-TZP zirconia (ZY5), lithium disilicate ceramic (LDS), zirconia-reinforced lithium silicate ceramic (ZLS), polymer-infiltrated ceramic network (MHY), polymethylmethacrylate (PMA), and 3D-printed hybrid composite (PHC) (n = 10 for each material). Eighty implants (Camlog Progressive-Line, diameter: 3.8 mm) were embedded in accordance with ISO standard 14801, and crowns were mounted. After artificial aging (1.2 × 106 cycles, 50 N, thermocycling), intact specimens were loaded 30° off-axis in a universal testing machine until failure.Results Seven specimens in the PHC group failed during artificial aging, and all the others survived. There were two subgroups based on the one-way analysis of variance and Dunnett's test (P < 0.05) of the mean fracture load values. The first comprised Z3Y, ZY35, Z5Y, and LDS, with mean fracture loads between 499.4 and 529.7 N, while the second included ZLS, MHY, and PMA, with values in the 346.2-416.0 N range. ZY3, ZY35, ZY5, and LDS exhibited irreversible, visible deformations of the implant shoulders with varying dimensions after load-to-fracture tests.Conclusions Crowns made of LDS, ZLS, MHY, and PMA may act as potential stress breakers, and prevent possible deformation at IAIs. Further clinical studies need to assess if these materials also withstand relevant loads in-vivo.

Immediate loading of a fixed full-arch prosthesis on four template-guided implants.

BACKGROUND: Treatment of the edentulous maxilla with a fixed full-arch prosthesis on four immediately loaded implants has been discussed as a treatment option, although generally five implants are recommended for that indication. The precise transfer of the virtually planned position by 3D-guided implant placement is an essential prerequisite for delivering the prefabricated temporary restoration at the time of surgery. Three-point support on the teeth or implants ensures that the template for the guided surgery is soundly seated during the operation. CASE PRESENTATION: In the described case, the three-point support was carried out by teeth and temporary implants in the molar region inserted prior to the CBCT. The virtual implant planning determined the best prosthetic implant position while using the available bone to avoid extensive augmentation. Following this, a metal-reinforced provisional restoration was prepared using a drilling template. Four implants were placed in the planned position with the aid of a tooth-/implant-supported guide. The prosthetic axis of the angulated distal implants is balanced by 17-degree angled abutments. After transferring the implant position to the dental laboratory, the prepared restoration was finalized. The remaining teeth were extracted and the temporary restoration was delivered 3 h after implant placement. The definitive fixed full-arch zirconia restoration with micro layering was placed 9 months later in a stable situation. CONCLUSION: The remarkable accuracy of the implant placement with a surgical template generated from preoperative virtual implant planning ensures a relatively short treatment time and an uneventful and fast recovery with minimal discomfort. The immediate prosthodontic rehabilitation is a benefit, not only for the patient but also for the dental team. Micro-layered monolithic zirconia seems to be a promising option for screw-retained full-arch prostheses.

Up to 10-Year Incidence of Complications in Fixed vs Removable Implant-Supported Restorations for Edentulous Arches.

PURPOSE: To retrospectively compare the incidence of biologic and prosthetic complications in implant-supported fixed dental prostheses (FDP) and removable dental prostheses (RDP) in edentulous patients after up to 10 years. MATERIALS AND METHODS: A total of 13 patients (mean age: 58.8 years, women = 9, men = 4) who had received 14 implant-supported FDPs and a total of 43 patients (mean age: 64.4 years, 22 women, 21 men) who were provided with 50 implant-supported RDPs were included in the study. The RDPs were fixed using locator attachments, ball heads, bars, or double-crowns. Technical, biologic, and prosthetic complications were assessed over a 73.3-month (± 37.7) follow-up period, and the collected data covered the period between 2000 and 2016. Using Kaplan-Meier curve and Breslow tests, the data were statistically analyzed. The level of peri-implant bone margins was determined at least every 2 years. RESULTS: Of the 328 implants placed, 2 had to be removed during the follow-up period. All implant superstructures were still in situ at the end of the observation period. The mean overall complication rate was 0.24 per restoration per year for FDPs and 0.37 per year for RDPs. Reasonable therapeutic interventions allowed for preserving and reestablishing the integrity of all implants and full operability of all superstructures. Prosthetic complications occurred about four to five times more frequently than biologic ones; however, according to Breslow test, the distribution of biologic and prosthetic complications was not significantly different (P > .05) when comparing FDPs and RDPs over 10 years. CONCLUSION: Implant-supported FDPs were not significantly more prone to complications than implant-supported RDPs over time. Prosthetic intervention was required more often than biologic interventions in both approaches.

Short communication: In vitro pilot study: Are monolithic 3Y-TZP zirconia crowns too strong for titanium Implants?

PURPOSE: To report on pilot tests for a planned study on single implant-supported crowns made from different restorative materials using finite element analysis (FEA) and in vitro load-to-failure testing. MATERIALS AND METHODS: Within this pilot study, FEA was conducted using Ansys 2019 R2 to simulate stress and deformation for implant-supported crowns made of lithium disilicate ceramic (LiS2) and zirconia (3Y-TZP). Additionally, an in vitro load to failure test was conducted using two specimens per group to evaluate the failure mode and to confirm the findings from the FEA. RESULTS/CONCLUSION: FEA revealed stress areas at the palatal cervical areas of the crowns. In the load to failure test, both hybrid abutment crowns made of LiS2 fractured (410 N and 510 N) before plastic deformation of the metal implant components occurred. The monolithic hybrid abutment crowns made of 3Y-TZP did not fracture until tests were interrupted at 646-N and 690-N occlusal force, when plastic deformation of the metal implant components was visually observed.

Immediately loaded implants simultaneously placed in fresh extraction and healed sites supporting four-implant-supported fixed mandibular prostheses using the all-on-4 concept: A 5-year prospective study.

OBJECTIVES: To evaluate the peri-implant marginal bone level for immediately loaded implants placed simultaneously in both fresh extraction sites (FES) and healed sites (HS) supporting a 4-implant supported mandibular fixed prosthesis (4-ISFMP) using the all-on-4 concept. MATERIAL AND METHODS: A 5-year prospective study was conducted in 24 patients (96 implants) treated with 4-ISFMP including 55 implants inserted in FES and 41 implants in HS. At implant placement (baseline) and at the 1st -, 3rd - and 5th -year follow-up examinations, peri-implant marginal bone level was evaluated radiographically and compared between placement in FES and HS. Marginal bone loss was calculated as the difference in the marginal bone level evaluated at the follow-up periods. Additionally, implant and prosthesis survival rates as well as the presence of peri-implant mucositis (bleeding on probing+[BOP]) and peri-implantitis (BOP+ >2 mm MBL) were evaluated. RESULTS: 22/24 patients with 88/96 implants (dropout rate: 8.3%) were continually followed for 5 years (survival rate: 100%). Radiographically measured marginal bone level differed significantly between FES and HS at implant placement (1.46 ± 0.80 mm vs. 0.60 ± 0.70 mm; p < .001), at the 1-year (-0.04 ± 0.14 mm vs. -0.18 ± 0.20 mm; p = .002) and 3-year (-0.26 ± 0.49 mm vs. -0.58 ± 0.48 mm, p = .049), but not at the 5-year evaluation (-0.90 ± 0.66 mm vs. -1.00 ± 0.59 mm, p = .361). The marginal bone loss differed significantly (p < .001) between FES and HS between implant placement and the 1-year evaluation but not for the 1- to 3-year (p > .99) and the 3- to 5-year period (p = .082). At the 5-year follow-up evaluation, no implant/prosthesis failed (100% survival) and peri-implant mucositis and peri-implantitis were noted in 41.2% and 11.7% at patient level and in 17.6% and 4.5% at implant level respectively. CONCLUSION: Implants placed in FES showed a prolonged peri-implant remodelling process but provided for similar peri-implant marginal bone levels as implants placed in HS at the 5-year evaluation for immediately loaded 4-ISFMP.

Influence of butt joint connections with long guiding areas on the stability of single crowns and 3-unit bridges - an in-vitro-study.

Purpose The aim of this study was to evaluate the stability of single crowns and 3-unit bridges in relation to the implant-abutment complex with and without tube in tube connection.Methods 60 specimens with a total of 90 implants (diameter 3.8 mm) were fabricated and distributed into 4 groups: CST (Crown with short tube), CLT (crown with long tube), BNT (Bridge without tube) and BLT (bridge with long tube). All superstructures consisted of one-piece hybrid abutment restorations out of monolithic zirconia, bonded on prefabricated titanium bases and were directly screwed into the implants. Specimen underwent artificial aging (2.000.000 cycles, 120 N, 30° off axis) and were subsequently loaded in an universal testing machine at an angle of 30° until failure. The specimens were examined for damage during and after artificial aging.Results During artificial aging, one test specimen of group CLT and two test specimens of group BNT failed. The average failure load was 498.8 (± 34.4) N for CLT, 418.8 (± 41.5) N for CST, 933.1 (± 26.2) N for BLT and 634.4 (± 29.0) N for BNT, with a statistical differences (p ˂ 0.001) between the crown and bridge groups. All tested samples exhibited macroscopic deformations at the implant shoulder, which were more pronounced in the specimens without a tube in tube connection.Conclusions Single crowns and 3-unit bridges with a long tube in tube connection showed significantly higher fatigue fracture strength compared to restorations with short or without tube in tube connection.

Mechanical stability of all-ceramic abutments retained with three different screw materials in two-piece zirconia implants-an in vitro study.

OBJECTIVES: To measure the abutment rotation and fracture load of two-piece zirconia implants screwed with three different abutment screw materials. MATERIAL AND METHODS: Thirty-six zirconia implants with 36 zirconia abutments were distributed into 3 test groups: group G connected with gold screws, group T with titanium screws, and group P with peek screws. In the first part of the study, the rotation angle of the abutments was measured. The second part of the study measured the maximum fracture force of adhesively bonded lithium disilicate crowns after artificial aging and fracture modes were reported. RESULTS: In group G, the median rotation angle was 8.0°, in group T 11.6°, and in group P 9.5°. After artificial aging, no screw loosening, crown, abutment, or implant fracture occurred. The median fracture force in group G was 250 N, in group T 263 N, and in group P 196 N. CONCLUSIONS: Rotation angles and fracture loads of two-piece zirconia implants with gold, titanium, or peek screws showed no significant differences; however, fracture loads showed inferior results for group P. CLINICAL RELEVANCE: The indication for the material peek as an abutment screw is still questionable and should be considered carefully.

Advances in materials and concepts in fixed prosthodontics: a selection of possible treatment modalities.

The introduction of adhesive techniques in combination with translucent restorative materials has greatly influenced treatment concepts in fixed prosthodontics. Modern production technologies offer access to new polymer materials that provide innovative pre-treatment options for complex prosthetic rehabilitations. Additionally, computer-aided design and manufacturing (CAD/CAM) provides access to new ceramic types and thus extends the range of indications for metal-free restorative options. With these developments, important changes of treatment concepts in fixed prosthodontics have occurred which affect the professional life of dental practitioners with a focus on prosthetic dentistry. This article gives an overview of the advances in selected fields of fixed prosthodontics and provides support in material selection for different kinds of indications, from single-tooth restorations to fixed dental prostheses.

Metal-free implant-supported single-tooth restorations. Part II: Hybrid abutment crowns and material selection.

In many areas of restorative dentistry, metal-free materials offer an alternative to metal-based restorations while ensuring high levels of biocompatibility and esthetics. Rapidly evolving CAD/CAM technology has significantly expanded the range of materials available, providing access to materials classes and their combinations not previously available within conventional manufacturing, such as zirconia ceramics and hybrid ceramics. In addition, digital methods offer previously unavailable options in diagnostics, greater planning reliability, better material quality through standardization of the manufacturing process, and reproducibility - significant benefits that can be used to advantage, especially in oral implantology. Even though technological progress in the field of metal-free materials has given rise to considerable improvements in their mechanical properties over the decades, their clinical long-term success is still very much dependent on an appropriate indication and proper material selection, on the knowledge and skills of the dental practitioner and dental technician, and on an adequate occlusion concept. The high rate of innovation - both with regard to the materials themselves and to CAD/CAM technology - therefore requires an adequate level of prior knowledge to sensibly and successfully implement the wide range of possibilities. It is becoming more and more puzzling for users to find their way around the many different new techniques and materials. This review article provides an up-to-date overview of the possibilities and limitations of metal-free implant-supported single-tooth restorations. This second part discusses hybrid abutment crowns and materials selection. Resultant treatment concepts are presented and evaluated based on clinical examples.