RESUMO
The diversity of chemical environments present on unique crystallographic facets can drive dramatic differences in catalytic activity and the reaction mechanism. By coupling experimental investigations of five different IrO2 facets and theory, we characterize the detailed elemental steps of the surface redox processes and the rate-limiting processes for the oxygen evolution reaction (OER). The predicted complex evolution of surface adsorbates and the associated charge transfer as a function of applied potential matches well with the distinct redox features observed experimentally for the five facets. Our microkinetic model from grand canonical quantum mechanics (GC-QM) calculations demonstrates mechanistic differences between nucleophilic attack and O-O coupling across facets, providing the rates as a function of applied potential. These GC-QM calculations explain the higher OER activity observed on the (100), (001), and (110) facets and the lower activity observed for the (101) and (111) facets. This combined study with theory and experiment brings new insights into the structural features that either promote or hinder the OER activity of IrO2, which are expected to provide parallels in structural effects on other oxide surfaces.
RESUMO
Surface terminations and defects play a central role in determining how water interacts with metal oxides, thereby setting important properties of the interface that govern reactivity such as the type and distribution of hydroxyl groups. However, the interconnections between facets and defects remain poorly understood. This limits the usefulness of conventional notions such as that hydroxylation is controlled by metal cation exposure at the surface. Here, using hematite (α-Fe2O3) as a model system, we show how oxygen vacancies overwhelm surface cation-dependent hydroxylation behavior. Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy was used to monitor the adsorption of molecular water and its dissociation to form hydroxyl groups in situ on (001), (012), or (104) facet-engineered hematite nanoparticles. Supported by density functional theory calculations of the respective surface energies and oxygen vacancy formation energies, the findings show how oxygen vacancies are more prone to form on higher energy facets and induce surface hydroxylation at extremely low relative humidity values of 5 × 10-5%. When these vacancies are eliminated, the extent of surface hydroxylation across the facets is as expected from the areal density of exposed iron cations at the surface. These findings help answer fundamental questions about the nature of reducible metal oxide-water interfaces in natural and technological settings and lay the groundwork for rational design of improved oxide-based catalysts.
RESUMO
Water electrolysis can use renewable electricity to produce green hydrogen, a portable fuel and sustainable chemical precursor. Improving electrolyzer efficiency hinges on the activity of the oxygen evolution reaction (OER) catalyst. Earth-abundant, ABO3-type perovskite oxides offer great compositional, structural, and electronic tunability, with previous studies showing compositional substitution can increase the OER activity drastically. However, the relationship between the tailored bulk composition and that of the surface, where OER occurs, remains unclear. Here, we study the effects of electrochemical cycling on the OER activity of La0.5Sr0.5Ni1-xFexO3-δ (x = 0-0.5) epitaxial films grown by oxide molecular beam epitaxy as a model Sr-containing perovskite oxide. Electrochemical testing and surface-sensitive spectroscopic analyses show Ni segregation, which is affected by electrochemical history, along with surface amorphization, coupled with changes in OER activity. Our findings highlight the importance of surface composition and electrochemical cycling conditions in understanding OER performance, suggesting common motifs of the active surface with high surface area systems.
RESUMO
Electrocatalysis is a promising approach to convert waste nitrate to ammonia and help close the nitrogen cycle. This renewably powered ammonia production process sources hydrogen from water (as opposed to methane in the thermal Haber-Bosch process) but requires a delicate balance between a catalyst's activity for the hydrogen evolution reaction (HER) and the nitrate reduction reaction (NO3RR), influencing the Faradaic efficiency (FE) and selectivity to ammonia/ammonium over other nitrogen-containing products. We measure ammonium FEs ranging from 3.6 ± 6.6% (on Ag) to 93.7 ± 0.9% (on Co) across a range of transition metals (TMs; Ti, Fe, Co, Ni, Ni0.68Cu0.32, Cu, and Ag) in buffered neutral media. To better understand these competing reaction kinetics, we develop a microkinetic model that captures the voltage-dependent nitrate rate order and illustrates its origin as competitive adsorption between nitrate and hydrogen adatoms (H*). NO3RR FE can be described via competition for electrons with the HER, decreasing sharply for TMs with a high work function and a correspondingly high HER activity (e.g., Ni). Ammonium selectivity nominally increases as the TM d-band center energy (Ed) approaches and overcomes the Fermi level (EF), but is exceptionally high for Co compared to materials with similar Ed. Density functional theory (DFT) calculations indicate Co maximizes ammonium selectivity via (1) strong nitrite binding enabling subsequent reduction and (2) promotion of nitric oxide dissociation, leading to selective reduction of the nitrogen adatom (N*) to ammonium.
RESUMO
Interactions between a transition metal (oxide) catalyst and a support can tailor the number and nature of active sites, for instance in the methanol oxidation reaction. We here use ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to identify and compare the surface adsorbates that form on amorphous metal oxide films that maximize such interactions. Considering Al(1-x)MxOy (M = Fe or Mn) films at a range of methanol : oxygen gas ratios and temperatures, we find that the redox-active transition metal site (characterized by methoxy formation) dominates dissociative methanol adsorption, while basic oxygen sites (characterized by carbonate formation) play a lesser role. Product detection, however, indicates complete oxidation to carbon dioxide and water with partial oxidation products (dimethyl ether) comprising a minor species. Comparing the intensity of methoxy and hydroxyl features at a fixed XPS chemical shift suggests methanol deprotonation during adsorption in oxygen rich conditions for high transition metal content. However, increasing methanol partial pressure and lower metal site density may promote oxygen vacancy formation and the dehydroxylation pathway, supported by a nominal reduction in the oxidation state of iron sites. These findings illustrate that AP-XPS and mass spectrometry together are powerful tools in understanding metal-support interactions, quantifying and probing the nature of catalytic active sites, and considering the link between electronic structure of materials and their catalytic activity.
RESUMO
Electrocatalytic reactions are known to take place at the catalyst/electrolyte interface. Whereas recent studies of size-dependent activity in nanoparticles and thickness-dependent activity of thin films imply that the sub-surface layers of a catalyst can contribute to the catalytic activity as well, most of these studies consider actual modification of the surfaces. In this study, the role of catalytically active sub-surface layers was investigated by employing atomic-scale thickness control of the La0.7 Sr0.3 MnO3 (LSMO) films and heterostructures, without altering the catalyst/electrolyte interface. The activity toward the oxygen evolution reaction (OER) shows a non-monotonic thickness dependence in the LSMO films and a continuous screening effect in LSMO/SrRuO3 heterostructures. The observation leads to the definition of an "electrochemically-relevant depth" on the order of 10 unit cells. This study on the electrocatalytic activity of epitaxial heterostructures provides new insight in designing efficient electrocatalytic nanomaterials and core-shell architectures.
RESUMO
Rare earth nickelates including LaNiO3 are promising catalysts for water electrolysis to produce oxygen gas. Recent studies report that Fe substitution for Ni can significantly enhance the oxygen evolution reaction (OER) activity of LaNiO3. However, the role of Fe in increasing the activity remains ambiguous, with potential origins that are both structural and electronic in nature. On the basis of a series of epitaxial LaNi1-xFexO3 thin films synthesized by molecular beam epitaxy, we report that Fe substitution tunes the Ni oxidation state in LaNi1-xFexO3 and a volcano-like OER trend is observed, with x = 0.375 being the most active. Spectroscopy and ab initio modeling reveal that high-valent Fe3+δ cationic species strongly increase the transition-metal (TM) 3d bandwidth via Ni-O-Fe bridges and enhance TM 3d-O 2p hybridization, boosting the OER activity. These studies deepen our understanding of structural and electronic contributions that give rise to enhanced OER activity in perovskite oxides.
RESUMO
The hydrogenation of benzaldehyde to benzyl alcohol on carbon-supported metals in water, enabled by an external potential, is markedly promoted by polarization of the functional groups. The presence of polar co-adsorbates, such as substituted phenols, enhances the hydrogenation rate of the aldehyde by two effects, that is, polarizing the carbonyl group and increasing the probability of forming a transition state for H addition. These two effects enable a hydrogenation route, in which phenol acts as a conduit for proton addition, with a higher rate than the direct proton transfer from hydronium ions. The fast hydrogenation enabled by the presence of phenol and applied potential overcompensates for the decrease in coverage of benzaldehyde caused by competitive adsorption. A higher acid strength of the co-adsorbate increases the intensity of interactions and the rates of selective carbonyl reduction.
RESUMO
In this perspective, we highlight the role of surface heterogeneity in electrosynthesis reactions. Heterogeneities may come in the form of distinct crystallographic facets, boundaries between facets or grains, or point defects. We approach this topic from a foundation of surface science, where signatures from model systems provide understanding of observations on more complex and higher-surface-area materials. In parallel, probe-based techniques can inform directly on spatial variation across electrode surfaces. We call attention to the role spectroscopy can play in understanding the impact of these heterogeneities in electrocatalyst activity and selectivity, particularly where these surface features have effects extending into the electrolyte double layer.
RESUMO
Developing highly efficient and cost-effective oxygen evolution reaction (OER) electrocatalysts is critical for many energy devices. While regulating the proton-coupled electron transfer (PCET) process via introducing additive into the system has been reported effective in promoting OER activity, controlling the PCET process by tuning the intrinsic material properties remains a challenging task. In this work, we take double perovskite oxide PrBa0.5Sr0.5Co1.5Fe0.5O5+δ (PBSCF) as a model system to demonstrate enhancing OER activity through the promotion of PCET by tuning the crystal orientation and correlated proton diffusion. OER kinetics on PBSCF thin films with (100), (110), and (111) orientation, deposited on single crystal LaAlO3 substrates, were investigated using electrochemical measurements, density functional theory (DFT) calculations, and synchrotron-based near ambient X-ray photoelectron spectroscopy. The results clearly show that the OER activity and the ease of deprotonation depend on orientation and follow the order of (100) > (110) > (111). Correlated with OER activity, proton diffusion is found to be the fastest in the (100) film, followed by (110) and (111) films. Our results point out a way of boosting PCET and OER activity, which can also be successfully applied to a wide range of crucial applications in green energy and environment.
RESUMO
The perovskite oxide LaNiO3 is a promising oxygen electrocatalyst for renewable energy storage and conversion technologies. Here, it is shown that strontium substitution for lanthanum in coherently strained, epitaxial LaNiO3 films (La1- x Sr x NiO3) significantly enhances the oxygen evolution reaction (OER) activity, resulting in performance at x = 0.5 comparable to the state-of-the-art catalyst Ba0.5Sr0.5Co0.8Fe0.2O3- δ . By combining X-ray photoemission and X-ray absorption spectroscopies with density functional theory, it is shown that an upward energy shift of the O 2p band relative to the Fermi level occurs with increasing x in La1- x Sr x NiO3. This alloying step strengthens Ni 3d-O 2p hybridization and decreases the charge transfer energy, which in turn accounts for the enhanced OER activity.
RESUMO
The functionality of magnetite, Fe3O4, for catalysis and spintronics applications is dependent on the molar ratio of Fe2+ and Fe3+ and their distribution at the surface. In turn, this depends on a poorly understood interplay between crystallographic orientation, dopants, and the reactive adsorption of atmospheric species such as water. Here, (100)-, (110)-, and (111)-oriented films of titano-magnetite, Fe(3-x)TixO4, were grown by pulsed laser deposition and their composition, valence distribution, magnetism, and interaction with water were studied by ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and X-ray magnetic circular dichroism. Although the bulk compositions match the desired stoichiometry, the surfaces were found to be enriched in Ti4+, especially the top 1 nm. The highest surface energy (110) film was the most reduced, tied to local Ti enrichment, and a corresponding decreased magnetic moment. AP-XPS showed that incorporation of x = 0.25 Ti dramatically lowered the propensity to form hydroxyl species at a given relative humidity, and also that hydroxylation is relatively invariant with orientation. In contrast, the affinity for water is similar across orientations, regardless of Ti incorporation, suggesting that relative humidity controls its uptake. The findings may help demystify the interactions that lead to specific distributions of Fe2+ and Fe3+ at magnetite surfaces, toward design of more deliberately active catalysts and magnetic devices.
RESUMO
Epitaxial strain can cause both lattice distortion and oxygen nonstoichiometry, effects that are strongly coupled at heterojunctions of complex nickelate oxides. Here we decouple these structural and chemical effects on the oxygen evolution reaction (OER) by using a set of coherently strained epitaxial NdNiO3 films. We show that within the regime where oxygen vacancies (VO) are negligible, compressive strain is favorable for the OER whereas tensile strain is unfavorable; the former induces orbital splitting, resulting in a higher occupancy in the d3 z2- r2 orbital and weaker Ni-O chemisorption. However, when the tensile strain is sufficiently large to promote VO formation, an increase in the OER is also observed. The partial reduction of Ni3+ to Ni2+ due to VO makes the eg occupancy slightly larger than unity, which is thought to account for the increased OER activity. Our work highlights that epitaxial-strain-induced lattice distortion and VO generation can be individually or collectively exploited to tune OER activity, which is important for the predictive synthesis of high-performance electrocatalysts.
RESUMO
This corrects the article DOI: 10.1038/nchem.2695.
RESUMO
Understanding the surface chemistry of electrocatalysts in operando can bring insight into the reaction mechanism, and ultimately the design of more efficient materials for sustainable energy storage and conversion. Recent progress in synchrotron based X-ray spectroscopies for in operando characterization allows us to probe the solid/liquid interface directly while applying an external potential, applied here to the model system of Pt in alkaline electrolyte for the hydrogen evolution reaction (HER). We employ ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to identify the oxidation and reduction of Pt-oxides and hydroxides on the surface as a function of applied potential, and further assess the potential for hydrogen adsorption and absorption (hydride formation) during and after the HER. This new window into the surface chemistry of Pt in alkaline electrolyte brings insight into the nature of the rate limiting step, the extent of H ad/absorption, and its persistence at more anodic potentials.
RESUMO
This corrects the article DOI: 10.1038/nchem.2695.
RESUMO
Understanding how materials that catalyse the oxygen evolution reaction (OER) function is essential for the development of efficient energy-storage technologies. The traditional understanding of the OER mechanism on metal oxides involves four concerted proton-electron transfer steps on metal-ion centres at their surface and product oxygen molecules derived from water. Here, using in situ 18O isotope labelling mass spectrometry, we provide direct experimental evidence that the O2 generated during the OER on some highly active oxides can come from lattice oxygen. The oxides capable of lattice-oxygen oxidation also exhibit pH-dependent OER activity on the reversible hydrogen electrode scale, indicating non-concerted proton-electron transfers in the OER mechanism. Based on our experimental data and density functional theory calculations, we discuss mechanisms that are fundamentally different from the conventional scheme and show that increasing the covalency of metal-oxygen bonds is critical to trigger lattice-oxygen oxidation and enable non-concerted proton-electron transfers during OER.
RESUMO
The polarity of oxide surfaces can dramatically impact their surface reactivity, in particular, with polar molecules such as water. The surface species that result from this interaction change the oxide electronic structure and chemical reactivity in applications such as photoelectrochemistry but are challenging to probe experimentally. Here, we report a detailed study of the surface chemistry and electronic structure of the perovskite LaFeO3 in humid conditions using ambient-pressure X-ray photoelectron spectroscopy. Comparing the two possible terminations of the polar (001)-oriented surface, we find that the LaO-terminated surface is more reactive toward water, forming hydroxyl species and adsorbing molecular water at lower relative humidity than its FeO2-terminated counterpart. However, the FeO2-terminated surface forms more hydroxyl species during water adsorption at higher humidity, suggesting that adsorbate-adsorbate interactions may impact reactivity. Our results demonstrate how the termination of a complex oxide can dramatically impact its reactivity, providing insight that can aid in the design of catalyst materials.
RESUMO
Understanding the interaction between water and oxides is critical for many technological applications, including energy storage, surface wetting/self-cleaning, photocatalysis and sensors. Here, we report observations of strong structural oscillations of Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) in the presence of both H2O vapour and electron irradiation using environmental transmission electron microscopy. These oscillations are related to the formation and collapse of gaseous bubbles. Electron energy-loss spectroscopy provides direct evidence of O2 formation in these bubbles due to the incorporation of H2O into BSCF. SrCoO3-δ was found to exhibit small oscillations, while none were observed for La0.5Sr0.5CoO3-δ and LaCoO3. The structural oscillations of BSCF can be attributed to the fact that its oxygen 2p-band centre is close to the Fermi level, which leads to a low energy penalty for oxygen vacancy formation, high ion mobility, and high water uptake. This work provides surprising insights into the interaction between water and oxides under electron-beam irradiation.