RESUMO
The number of plant-based meat products on supermarket shelves around the world has grown in recent years however reproducing the sensory experience of eating meat remains a challenge. This study aims to evaluate the sensory gaps between animal and plant-based meat products, specifically burger-type products, from the Australian market. The sample set of 19 commercially available burgers comprises 8 animal-based burgers prepared using beef, chicken, kangaroo, pork, or turkey and 11 high protein plant-based burgers. Vegetable patties are beyond the scope of this study. A trained sensory panel (n = 14) determined the major differences in aroma, texture, flavor, and aftertaste between meat and meat analogues during oral processing, particularly those that may impact consumer acceptability. The animal-based burgers scored high for meaty (aroma), meaty (flavor), and umami but not legume, vegetative, bitterness, and lingering spice attributes. They also received higher average scores for juiciness, fattiness, and final moistness than the plant-based burgers but scored lower in cohesiveness. The plant-based burgers scored high for legume and bitterness but not meaty (aroma), meaty (flavor), and umami attributes. Improving current products and designing new products with desirable sensory properties will enhance consumer acceptability and reinforce recent growth in the plant-based meats market.
Assuntos
Comportamento do Consumidor , Produtos da Carne , Odorantes , Paladar , Animais , Humanos , Produtos da Carne/análise , Bovinos , Odorantes/análise , Austrália , Adulto , Suínos , Galinhas , Feminino , Masculino , Perus , Macropodidae , Pessoa de Meia-Idade , Carne/análiseRESUMO
Using the surface characterization techniques of quartz crystal microbalance with dissipation, atomic force microscopy, and scanning electron microscopy, the structure of the salivary pellicle was investigated before and after it was exposed to dairy proteins, including micellar casein, skim milk, whey protein isolate (WPI), and a mixture of skim milk and WPI. We have shown that the hydration, viscoelasticity, and adsorbed proteinaceous mass of a preadsorbed salivary pellicle on a PDMS surface are greatly affected by the type of dairy protein. After interaction with whey protein, the preadsorbed saliva pellicle becomes softer. However, exposure of the saliva pellicle to micellar casein causes the pellicle to partially collapse, which results in a thinner and more rigid surface layer. This structure change correlates with the measured lubrication behavior when the saliva pellicle is exposed to dairy proteins. While previous studies suggest that whey protein is the main component in milk to interact with salivary proteins, our study indicates interactions with casein are more important. The knowledge gained here provides insights into the mechanisms by which different components of dairy foods and beverages contribute to mouthfeel and texture perception, as well as influence oral hygiene.
Assuntos
Película Dentária , Proteínas e Peptídeos Salivares , Película Dentária/química , Película Dentária/metabolismo , Proteínas e Peptídeos Salivares/química , Proteínas e Peptídeos Salivares/metabolismo , Adsorção , Caseínas/química , Caseínas/metabolismo , Propriedades de Superfície , Proteínas do Soro do Leite/química , Humanos , Animais , Microscopia de Força Atômica , Saliva/química , Saliva/metabolismo , Técnicas de Microbalança de Cristal de QuartzoRESUMO
Astringency is an important mouthfeel attribute that influences the sensory experiences of many food and beverage products. While salivary lubricity loss and increased oral friction were previously believed to be the only astringency mechanisms, recent research has demonstrated that nontactile oral receptors can trigger astringency by responding to astringents without mechanical stimulation. Various human factors have also been identified that affect individual responses to astringents. This article presents a critical review of the key research milestones contributing to the current understanding of astringency mechanisms and the instrumental approaches used to quantify perceived astringency intensity. Although various chemical assays or physical measures mimic in-mouth processes involved in astringent mouthfeel, this review highlights how one chemical or physical approach can only provide a single measure of astringency determined by a specific mechanism. Subsequently, using a single measurement to predict astringency perception is overly idealistic. Astringency has not been quantified beyond the loss of saliva lubrication; therefore, nontactile receptor-based responses must also be explored. An important question remains about whether astringency is a single perception or involves distinct sub-qualities such as pucker, drying, and roughness. Although these sub-quality lexicons have been frequently cited, most studies currently view astringency as a single perception rather than dividing it into sub-qualities and investigating the potentially independent mechanisms of each. Addressing these knowledge gaps should be an important priority for future research.
Assuntos
Lubrificação , Saliva , Saliva/química , Saliva/metabolismo , Humanos , Adstringentes/farmacologia , Paladar/fisiologiaRESUMO
HYPOTHESIS: Aqueous suspensions of cellulose nanocrystals (CNC) form a re-entrant liquid crystal (LC) phase with increasing salinity. Phase separation occurs in this LC state leading to a biphasic gel with a flow programmable structure that can be used to form anisotropic soft materials. We term this state a Liquid Crystal Hydroglass (LCH). Defining the mechanisms by which the LCH forms requires detailed structural analysis at the mesoscopic length scale. EXPERIMENTS: By utilising Small Angle Neutron Scattering (SANS), we investigated the microstructure transitions in CNC suspensions, with a particular focus on the unique LC re-entrancy and gelation into the biphasic LCH. FINDINGS: Scattering from LCH gels comprises contributions from a dispersed liquid state and static heterogeneity, characterised using a Lorentzian-Gaussian model of inhomogeneity. This conceptually supports a gelation mechanism (spinodal decomposition) in CNC suspensions towards a biphasic structure of the LCH. It also demonstrates that, with increasing salinity, the non-monotonic variation in effective volume fraction of CNC rods fundamentally causes the LC re-entrancy. This work provides the first experimental characterisation of the LC-re-entrancy and formation of an anisotropic LCH gel. The proposed mechanism can be extended to understanding the general behaviour of anisotropic colloids.
RESUMO
Three of nineteen Araucaria tree species from around the world produce large edible seeds. While composition is established for edible pinhão and piñones nuts from Brazil and Chile, respectively, the first detailed characterisation for the composition of edible Araucaria bidwillii (bunya nut) from Australia is provided. Almost half of the kernel weight is moisture and the main component in the dried kernel is starch. Whilst low in protein and fat, it contains all essential amino acids and half the fatty acids are polyunsaturated (Omega-3 and 6). Bunya nuts are a source of dietary fibre, folate and minerals (Cu, Mn, Fe, Mg), while the nut husks and inner coating are high in phenolics, mainly catechin. The composition supports the Traditional Knowledge of Aboriginal Australians that the bunya nut is an energy dense and nutrient rich food. Similarities in the composition among the three different edible varieties were found, which should assist in developing sustainable value chain propositions via shared knowledge on processing and utilisation.
Assuntos
Araucaria , Nozes , Humanos , Nozes/química , Araucaria araucana , Austrália , Sementes/químicaRESUMO
HYPOTHESIS: Modifying surfaces with concentrated polymer brushes (CPBs) is an effective way to reduce friction of tribo-pairs lubricated with liquids. We investigate the hypothesis that colloids grafted with CPBs (hybrid colloids) can deposit onto tribo-substrates by varying the solvent quality with respect to the polymer, in order to obtain ultra-low coefficients of friction (CoFs), so-called superlubricity. EXPERIMENTS: Hybrid colloids are synthesized and characterized, and a dynamic light scattering compares their swellings in aqueous solutions of glycerol or polyethylene glycol. A mini-traction machine with viscoelastic tribo-pairs is used for lubrication experiments. Adsorption of colloids and film structures are tested using a quartz crystal microbalance and an atomic force microscope. FINDINGS: The solvent controls whether hybrid colloids spontaneously adsorb to the substrate under quiescent conditions or require contact forces to enable (tribo-)deposition. In both cases, the friction in the boundary-mixed lubrication regimes is lower upon increasing the degree of swelling of CPBs and upon increasing coverage of deposited colloids. The greatest lubrication enhancement and surface coverage occur for the spontaneously adsorbed colloids, with ultra-low CoFs of order 10-3 over a large range of speeds. The results demonstrate the potential for hybrid colloids to be used as solvent dispersible "friction modifier additives".
Assuntos
Polietilenoglicóis , Polímeros , Polímeros/química , Propriedades de Superfície , Solventes/química , Coloides/químicaRESUMO
Bunya nuts are the seeds of Araucaria bidwillii, a conifer native to South-East Queensland, Australia. They are one of the 19 species of Araucaria family found around the world, with the nuts from South America being the most commonly consumed. They are traditionally eaten boiled or roasted. This study aims to profile the sensory properties of bunya nuts with chestnut as a comparator. Since chestnuts do not come from a conifer tree, it is expected that there will be differences. Different methods of preparation are also expected to change the sensory attributes. Representative samples were collected from a variety of locations in South-East Queensland, prepared and presented to a panel of 14 experienced tasters applying conventional sensory descriptive profiling. During training, the panel developed a lexicon of 23 sensory attributes together with definitions and reference. Profiles of the boiled and roasted bunya nuts revealed higher scores for hardness on the first bite than chestnuts and, when chewed, became more crumbly, dry, and grainy. They had a savory aroma and flavor, and roasted samples exhibited a roasted aroma. Bunya nut samples were less sweet than chestnut samples. Differences in the sensory properties due to method of preparation were also observed. Boiled bunya nuts were softer and moister, with lower scores for crumbly and grainy. This research is foundational in providing technical information on the sensory profile of this important Indigenous Australian nut and provides a strong basis to support novel food sector opportunities for the bunya nut as a reemerging food source not only in Australia, but also South America. PRACTICAL APPLICATION: There is an increase demand for local, sustainable, and natural foods. Bunya nuts are native to Australia and are part of the Araucaria family, which includes 19 species that can be found around the world. To the best of our knowledge there is no study characterizing Araucaria nuts in terms of sensory attributes. This study builds a lexicon for bunya nuts and compares to chestnuts. It also shows how different preparation methods affect its sensory attributes, as well as possible future uses in product development. The outcomes might provide information to support studies on Araucaria nuts in other countries.
Assuntos
Nozes , Paladar , Austrália , Dureza , OdorantesRESUMO
We report rheological characterisation of hydrogels formed by highly substituted brush-like arabinoxylans from Plantago ovata seed mucilage. Two arabinoxlyan fractions with similar molecular weight and linkage compositions are chosen to form gels with distinct rheological properties but a similar network structure. Small and large amplitude oscillatory shear rheology is used to characterise the sol-gel transition as a function of temperature and concentration. Differences in rheology and gelation of the two hydrogels are found to be associated with the different proportion of 'slow'- and 'fast'-dissociating junctions stabilised by hydrogen bonds, with the 'fast'-dissociating junctions playing an important role in rapid self-healing of the gel. Based on the temperature dependence of storage modulus and time-temperature superposition principle in combination with the Arrhenius equation, the activation energies of junction zone dissociation are estimated to be 402-480 kJ/mol and 97-144 kJ/mol for the 'slow' and 'fast' junction types, respectively.
Assuntos
Hidrogéis/química , Plantago/química , Sementes/química , Substâncias Viscoelásticas/química , Xilanos/química , Módulo de Elasticidade , Ligação de Hidrogênio , Transição de Fase , ReologiaRESUMO
Suspensions of soft particles transition from a viscous fluid to a soft material upon increases in phase volume. The criteria defining the transition to this jammed state are difficult to define due to the porous and deformable nature of soft particles. Here, we characterise the rheology of aqueous suspensions of industrially relevant non-colloidal, polydisperse, frictional agarose microgels and evaluate shear and viscoelastic behaviour across a range of phase volumes from the dilute regime to the highly concentrated regime. In order to model the viscoelastic response of suspensions without free fitting parameters, the random close packing volume fraction (φrcp) and the particle modulus are determined, respectively, from particle size distribution measurements and direct measurements of reduced elastic modulus of individual particles (Erp) using Atomic Force Microscopy. It is found that at φrcp, previously shown to correspond to divergence of the viscosity, also corresponds to the suspension transition from a viscous to viscoelastic fluid. However, the transition to a jammed solid-like state (φj) occurs at phase volumes exceeding this value (i.e. φj > φrcp). The suspension modulus and its sudden growth at φj are well-predicted by the Evans and Lips model that incorporates the Erp of the hydrogel particles. This rheological behaviour showing a dual transition is reminiscent of two families of systems: (i) colloidal suspensions and (ii) frictional-adhesive non-colloidal suspensions. However, it does not strictly follow either case. We propose that the width of the transition region is dictated by frictional contact, particle size distribution and particle modulus, and plan to further probe this in future work.
RESUMO
Extracellular DNA, or eDNA, is recognised as a critical biofilm component; however, it is not understood how it forms networked matrix structures. Here, we isolate eDNA from static-culture Pseudomonas aeruginosa biofilms using ionic liquids to preserve its biophysical signatures of fluid viscoelasticity and the temperature dependency of DNA transitions. We describe a loss of eDNA network structure as resulting from a change in nucleic acid conformation, and propose that its ability to form viscoelastic structures is key to its role in building biofilm matrices. Solid-state analysis of isolated eDNA, as a proxy for eDNA structure in biofilms, reveals non-canonical Hoogsteen base pairs, triads or tetrads involving thymine or uracil, and guanine, suggesting that the eDNA forms G-quadruplex structures. These are less abundant in chromosomal DNA and disappear when eDNA undergoes conformation transition. We verify the occurrence of G-quadruplex structures in the extracellular matrix of intact static and flow-cell biofilms of P. aeruginosa, as displayed by the matrix to G-quadruplex-specific antibody binding, and validate the loss of G-quadruplex structures in vivo to occur coincident with the disappearance of eDNA fibres. Given their stability, understanding how extracellular G-quadruplex structures form will elucidate how P. aeruginosa eDNA builds viscoelastic networks, which are a foundational biofilm property.
Assuntos
Biofilmes/crescimento & desenvolvimento , DNA Ambiental/química , Matriz Extracelular de Substâncias Poliméricas/genética , Pseudomonas aeruginosa/fisiologia , DNA Bacteriano/química , Matriz Extracelular de Substâncias Poliméricas/química , Quadruplex G , Líquidos Iônicos/química , Espectroscopia de Ressonância Magnética , Pseudomonas aeruginosa/genéticaRESUMO
Soft tribology is used to probe the lubrication behaviour of molten chocolate between soft contacts, analogous to in-mouth interactions between the tongue and palate. Molten chocolate is a concentrated suspension of solid particles (sugar, cocoa and milk solids) in cocoa butter. We hypothesise that the complex frictional behaviour of molten chocolate depends on its particulate nature and thus solid volume fraction (sugar & cocoa solids/fat content). In this work, we assess the properties of molten chocolate as a function of fat content by diluting milk chocolate containing 26, 27 and 29% fat with cocoa butter. The tribological behaviour of molten chocolate deviates notably from the typical Stribeck curve of Newtonian fluids. Additional transitions are observed in mixed and elastohydrodynamic lubrication which are respectively attributed to the effect of shear-thinning rheology (i.e. breakdown of aggregates) and the selective entrainment or exclusion of particles depending on interfacial gap height. These transitions are more pronounced in chocolate of high solid fraction, and correlate with the influence of particle aggregation on rheology. In addition, we assess oral lubrication by preparing model chocolate boluses with aqueous buffer, which produces a ternary system of oil droplets and insoluble cocoa solids dispersed within a continuous aqueous phase. The frictional behaviour of chocolate boluses is determined by the viscosity ratio between cocoa butter and aqueous phase, in agreement with previous findings for oil-in-water emulsions. We provide a conceptual model to interpret how fat content influences the oral lubrication and mouthfeel of chocolate during consumption.
Assuntos
Cacau/química , Chocolate/análise , Fricção/fisiologia , Óleos de Plantas/química , Humanos , Lubrificação , Modelos Químicos , Saliva/química , Saliva/metabolismo , ViscosidadeRESUMO
Nanocrystalline cellulose (NCC) is a colloidal rigid rod, referred to by various terms in the literature including cellulose whisker (CW) and cellulose nanocrystal (CNC). These charged colloidal rods exhibit complex colloidal phase and rheological behaviours in aqueous suspensions, that are dependent on volume fraction and interparticle forces. A major shortcoming in the literature of NCC is that the dimensions and morphology of NCC particles vary significantly with the type of raw material and manufacturing conditions, which causes inconsistencies in suspension rheology and colloidal behaviours reported between different works. In this review, we consider the theory and experimentally-determined rheological and colloidal phase behaviours of charged rod suspensions in general, with a focus in particular on NCC. Dilute and semi-dilute NCC suspensions are isotropic liquids, in which NCC particles follow diffusional dynamics. The rheology of these isotropic NCC suspensions can be described by theoretical models that account for the effects of rod dimensions and surface charge, including those based on Doi and Edwards' theory. With increasing NCC concentration, the isotropic phase can undergo a transition to a liquid crystalline state (isotropic-nematic transition) or a transition to a dynamically arrested solid (liquid-solid transition). The liquid crystal ordering and gelation/glass transition are of particular interest because they respectively form an ordered structure and allow a solid-like mechanical response at relatively low solids fraction. For conditions at which the isotropic-nematic and liquid-solid transitions coincide, the formation of an anisotropic structure within a soft solid suspension is possible. Investigation of these two competing transitions led to the discovery of liquid crystal re-entrancy and existence of an anisotropic soft solid (liquid crystal hydroglass, LCH). LCH has a biphasic structure with an attractive glass matrix and a co-existing liquid crystal phase, providing similar viscoelastic properties to hydrogels but permitting reversible orientation of the colloidal rods in the liquid crystalline phase by shear forces; i.e. their structural ordering is programmable. The liquid crystal transition and gelation/glass transitions are quantitatively dependent on rod dimensions i.e. respectively proportional to L2D and L/D. Phase transitions in NCC suspensions including liquid crystal re-entrancy and formation of LCH can be fully described as a function of rod dimension, volume fraction and interparticle forces. This behaviour is independent of NCC source, allowing development of a generalised phased diagram in which separately-reported phase transitions converge to consistent phase boundaries. This validates a key hypothesis for the study of NCC suspensions, that variation in NCC concentration and interparticle forces can explain the complex phase behaviours observed within suspensions formulated using NCC obtained from different sources.
RESUMO
We discuss food oral processing research over the last two decades and consider strategies for quantifying the food breakdown model, originally conceptualized by Hutchings and Lillford. The key innovation in their seminal 1988 paper was shifting the focus from intact food properties, measured in the lab, toward strategies to capture the dynamic nature of eating. This has stimulated great progress in the field, but a key aspect missing in oral processing research is the conversion of the Hutchings and Lillford breakdown path conceptual model into quantifiable parameters considered in the context of physiological factors such as saliva and oral movements. To address these shortcomings, we propose the following analysis: Hutchings's and Lillford's definitions of "Structure" and "Lubrication" are incomplete and they comprise many and varied physicochemical properties. We offer, here, a deeper analysis of each parameter, and propose strategies for researchers to consider in their quantification as an update of the Hutchings and Lillford Breakdown path.
Assuntos
Alimentos , Boca/fisiologia , Saliva/fisiologia , Humanos , Lubrificação , Reologia , Paladar , ViscosidadeRESUMO
Here we provide a comprehensive review of the knowledge base of soft tribology, the study of friction, lubrication, and wear on deformable surfaces, with consideration for its application toward oral tribology and food lubrication. Studies on "soft-tribology" have emerged to provide knowledge and tools to predict oral behavior and assess the performance of foods and beverages. We have shown that there is a comprehensive set of fundamental literature, mainly based on soft contacts in the Mini-traction machine with rolling ball on disk configuration, which provides a baseline for interpreting tribological data from complex food systems. Tribology-sensory relationships do currently exist. However, they are restricted to the specific formulations and tribological configuration utilized, and cannot usually be applied more broadly. With a careful and rigorous formulation/experimental design, we envisage tribological tools to provide insights into the sensory perception of foods in combination with other in vitro technique such as rheology, particle sizing or characterization of surface interactions. This can only occur with the use of well characterized tribopairs and equipment; a careful characterization of simpler model foods before considering complex food products; the incorporation of saliva in tribological studies; the removal of confounding factors from the sensory study and a global approach that considers all regimes of lubrication.
Assuntos
Alimentos , Percepção Gustatória/fisiologia , Fricção , Humanos , Lubrificantes , Lubrificação , Reologia , Saliva/metabolismo , Sensação , IogurteRESUMO
HYPOTHESIS: Liquid crystal hydroglass (LCH) is a biphasic soft material with flow programmable anisotropy that forms via phase separation in suspensions of charged colloidal rods upon increases in ionic strength. The unique structure and rheology of the LCH gel formed using nanocrystalline cellulose (NCC) is hypothesised to be dependent on colloidal stability that is modulated using specific ion effects arising from Hofmeister phenomena. EXPERIMENTS: LCHs are prepared in NCC suspensions in aqueous media containing varying levels of sodium chloride (NaCl) or sodium thiocyanate (NaSCN). The NCC suspensions are characterised using rheology and structural analysis techniques that includes polarised optical microscopy, zeta potential, dynamic light scattering and small-angle X-ray scattering. FINDINGS: The two salts have a profound effect on the formation process and structure of the LCH. Differences in network density and size of the liquid crystal domains are observed within the LCH for each of the salts, which is associated with the strength of interaction between NCC particles during LCH formation. In comparison to Cl- at the same salinity, the chaotropic nature of the weakly hydrated SCN- enhances colloidal stability by rendering NCC particles more hydrated and repulsive, but this also leads to weaker gel strength of the LCH. The results suggest that salts are a means in which to control the formation, structure and rheology of these anisotropic soft materials.
RESUMO
Oral processing of solid foods is an extremely dynamic and complicated activity that involves multiple processes in tandem such as comminution, mixing, dilution, hydration and enzymatic breakdown that gradually transform the food from a morsel or a bite to a bolus that is ready for swallowing. It is hypothesised that just after "first bite" and initial particle reduction and hydration of solid brittle foods, the response to deformation of food particles is analogous to studies on the flowability and cohesion of wetted powders, which are effectively characterised using a Ring Shear Tester (RST). We examine this hypothesis and determine whether the RST measures properties of solid snack foods (potato chips or crisps, PCs) that are relevant to their dynamic sensory response, which includes capturing the effect of hydration on comminuted PCs. The RST is found to differentiate PCs obtained from different manufacturing sources (e.g. baked versus fried), and its measurements of cohesion and friction can be considered in context of the structure and composition of the PCs as well as oral processing. Remarkably, RST measurements for this small set of PC samples correlate with several sensory attributes that arise during mastication, which includes Sharpness and Ease of Clearance. This study highlights the potential of the RST as a new tool for oral processing research.
Assuntos
Mastigação/fisiologia , Lanches , Solanum tuberosum , Adulto , Estudos de Avaliação como Assunto , Feminino , Tecnologia de Alimentos , Humanos , Masculino , Microscopia Confocal , Pessoa de Meia-Idade , Modelos Biológicos , Modelos Teóricos , PaladarRESUMO
Texture perception is conceptualized as an emergent cognitive response to food characteristics that comprise several physical and chemical properties. Contemporary oral processing research focuses on revealing the relationship between the sensory perceptions and food properties, with the goal of enabling rational product design. One major challenge is associated with revealing the complex molecular and biocolloidal interactions underpinning even simple texture percepts. Here, we introduce in vitro oral processing, which considers oral processing in terms of discrete units of operation (first bite, comminution, granulation, bolus formation, and tribology). Within this framework, we systematically investigate the material properties that govern each specific oral processing unit operation without being impacted by the biological complexity of the oral environment. We describe how this framework was used to rationally design a low-fat potato chip with improved sensory properties by investigating the impact from adding back, to a low-fat potato chip, a small amount of oil mixed with the surface-active agent polyglycerol polyricinoleate (PGPR). The relevance of instrumental measures is validated by sensory assessment, whereby panelists ranked the perceived oiliness of three different types of potato chips. The sensory results indicate that perceived oiliness was higher when a low-fat potato chip was supplemented with an additional 0.5% (w/w) topical coating (the coating comprised 15%, w/w, PGPR in oil) compared to the unaltered low-fat potato chip. The perceived difference in oiliness is hypothesized to correspond to the dynamic friction measured in vitro with a saliva-coated substrate in the presence and absence of PGPR. The study illustrates how dividing oral processing into distinct units provides a rational approach to food product design focused on controlling key sensory attributes.
Assuntos
Gorduras/análise , Boca/metabolismo , Solanum tuberosum/metabolismo , Gorduras/metabolismo , Manipulação de Alimentos , Humanos , Modelos Biológicos , Reologia , Saliva/metabolismo , Lanches , Solanum tuberosum/químicaRESUMO
Biomacromolecules play a key role in protecting human biointerfaces from friction and wear, and thus enable painless motion. Biomacromolecules give rise to remarkable tribological properties that researchers have been eager to emulate. In this review, we examine how molecules such as mucins, lubricin, hyaluronic acid and other components of biotribological interfaces provide a unique set of rheological and surface properties that leads to low friction and wear. We then highlight how researchers have used some of the features of biotribological contacts to create biomimetic systems. While the brush architecture of the glycosylated molecules present at biotribological interfaces has inspired some promising polymer brush systems, it is the recent advance in the understanding of synergistic interaction between biomacromolecules that is showing the most potential in producing surfaces with a high lubricating ability. Research currently suggests that no single biomacromolecule or artificial polymer successfully reproduces the tribological properties of biological contacts. However, by combining molecules, one can enhance their anchoring and lubricating capacity, thus enabling the design of surfaces for use in biomedical applications requiring low friction and wear.
Assuntos
Biomimética , Lubrificação , Substâncias Macromoleculares/química , Materiais Biomiméticos/química , Humanos , Reologia , ViscosidadeRESUMO
Dietary fibre fortified products have increased in popularity as health-conscious consumers seek convenient ways to increase fibre intake. Fibres from wholegrains are particularly desirable inclusions in food products because of their proven physiological health-benefits. When fortifying beverages with fibre, however, the insoluble dietary fibre components present in wholegrains often contribute to unpleasant gritty sensations making the products unpalatable. Consequently, designing wholegrain-fortified beverages with sufficient fibre-content to make health related fibre claims is a major challenge in the food manufacturing industry. This work aims to take a systematic approach in identifying the texture/mouthfeel related sensory impact and interaction between two commercial oat fibre ingredients (Oatwell28XF® and Milled Oats) when added to a model beverage system. Eighteen samples were prepared containing either or both the ingredients, at varying levels, and were assessed by a trained panel using conventional sensory descriptive techniques. The results indicate that the two different oat bran fibres produced distinct mouthfeel perceptions which could be attributed to the varying soluble and insoluble fibre content of the samples. Insoluble dietary fibre concentrations above 2% (w/w) resulted in particle-related sensory properties chalkiness, dryness and particle perception, which dominated the overall mouthfeel and textural sensory perception of the samples. Samples with predominantly soluble ß-glucan, resulted in perceptions of smoothness, sliminess and stickiness residue, while thickness, mouthcoating and cloying sensations were driven by total fibre concentration, irrespective of fibre solubility. This work provides a solid foundation for food manufacturers aiming to rationally design and develop nutritionally superior fibre-fortified beverages and is relevant to fibre content concentrations required for labelling/nutrition claims for consumer products in many developed nations.
Assuntos
Avena/química , Bebidas , Comportamento do Consumidor , Fibras na Dieta , Manipulação de Alimentos , Alimentos Fortificados , Grãos Integrais/química , Adulto , Fibras na Dieta/análise , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Boca , Percepção , Solubilidade , Tato , Viscosidade , beta-Glucanas/análiseRESUMO
A new anisotropic soft material - a liquid crystal 'hydroglass' (LCH) - is created from aqueous suspensions of nanocrystalline cellulose (NCC) colloidal rods. Under specific conditions, the NCC suspension separates into a colloid-rich attractive glass matrix phase and a coexisting liquid crystal phase. LCH provides similar viscoelastic properties to polymer and colloidal gels, but permits reversibly-orientating the colloidal rods through shear forces.