Minimally invasive sacroiliac fusion, a case series, and a literature review.

INTRODUCTION: Non-autoimmune sacroiliac joint pain contributes to nearly a quarter of low back pain patients. Non-surgical management fails to satisfy patients. A new minimally invasive technique for sacroiliac stabilization has been introduced, defying the traditional rules of fusion. The results outside explanatory trials and in day-to-day practice have not been reported. MATERIALS AND METHODS: This case series includes 20 patients diagnosed with chronic sacroiliac pain resistant to conservative management for at least 6 months. The diagnosis was confirmed with a positive sacroiliac injection. Patients underwent stabilization using the iFuse® implant. Patients were followed up for a minimum of one year. The primary outcome was the functional outcomes, assessed using VAS, ODI, and SF36. Secondary procedure rates, complication rates, and radiological assessments of fusion were collected as secondary outcomes. RESULTS: At one year, the mean VAS score improved from 81.25 ± 10.7 SD preoperatively to 52.5 ± 26.8, p-value 0.0013. The mean ODI improved from 54.8 ± 11.21 SD preoperatively to 41.315 ± 15.34, P value = 0.0079. The mean PCS and MCS of SF36 improved by 17 and 20 points, respectively. Only 55% of patients achieved the MCID for the VAS score. 35% of the cohort had secondary procedures. DISCUSSION: Minimally invasive sacroiliac fusion resulted in an improvement in mean functional scores with a wide dispersion. Patients not achieving MCID are patients with either a malpositioned implant, an associated lumbar pathology, or an inaccurate diagnosis. Our results are underwhelming compared to similar work but are still better than conservative cohorts in comparative studies. CONCLUSION: Minimally invasive sacroiliac fusion can be used successfully in select patients. Attention to diagnosis and surgical technique can improve the reproducibility of results.

Minimally Invasive Sacroiliac Joint Fusion with Triangular Titanium Implants: Cost-Utility Analysis from NHS Perspective.

OBJECTIVE: The aim was to identify the cost-effectiveness of minimally invasive sacroiliac joint fusion (MI SIJF) surgery with titanium triangular implants for patients with sacroiliac joint (SIJ) pain who have failed conservative management, compared to non-surgical management (NSM) from a National Health Service (NHS) England perspective. METHODS: Over a time horizon of 5 years, a cohort state transition model compared the costs and outcomes of treating patients with MI SIJF to those of traditional NSM treatment pathways. The NSM arm included two treatments: grouped physical therapy and corticosteroid injections (PTSI) or radiofrequency ablation (RFA). Three different strategies were considered: (1) a stepped pathway, (2) patients split between PTSI and RFA, and (3) RFA only. The outcome measure was incremental cost-effectiveness ratio (ICER), reported in 2018 British pounds per quality-adjusted life year (QALY) gained. One-way and probabilistic sensitivity analyses were used to test the robustness of the model results. RESULTS: Patients undergoing MI SIJF accrued total procedure-related and pain-management costs of £8358, while NSM treatment strategy 1 had total costs of £6880. The MI SIJF cohort had 2.98 QALYs compared to strategy 1 with 2.30 QALYs. This resulted in an ICER for MI SIJF versus strategy 1 of £2164/QALY gained. Strategy 2 of the NSM arm had lower costs than strategy 1 (£6564) and 2.26 QALYs, and this resulted in an ICER of £2468/QALY gained for MI SIJF. Strategy 3 of the NSM arm had lower costs than strategy 1 (£6580), and this resulted in 2.28 QALYs and an ICER of £2518/QALY gained for MI SIJF. Probabilistic sensitivity analysis shows that at a threshold of £20,000/QALY gained, MI SIJF has a probability of being cost-effective versus NSM strategies of 96%, 97%, and 91% for strategies 1, 2, and 3, respectively. CONCLUSION: MI SIJF appears to be cost-effective over a 5-year time horizon when compared to traditional NSM pathways in an NHS context.

Techniques for the Management of Failed Surgery for Fractures of the Neck of Femur.

BACKGROUND: The majority of modern surgical treatments for managing hip fracture in the elderly are successful and result in a very low rate of revision surgery. Subsequent operations are however occasionally necessary. Optimal management of complications such as infection, dislocation or failed fixation is critical in ensuring that this frail patient group is able to survive their treatment and return to near normal function. METHODS: This paper is a discussion of techniques, tips and tricks from a high volume hip fracture unit. CONCLUSION: This article is a technique-based guide to approaching the surgical management of failed hip fracture treatment and includes sections on revising both failed fixation and failed arthroplasty.

Perioperative management of elderly patients suffering a hip fracture.

Preparing elderly patients for emergency hip fracture surgery is a significant challenge for hospital staff. This article discusses the principles of preoperative care in these patients, and the rationale for such strategies, based on evidence and current guidelines. Such guidance increasingly reflects a national standard of care.

The results of total hip arthroplasty for fractured neck of femur in octogenarians.

The role of total hip arthroplasty (THA) for fracture in octogenarians remains unclear. Over a two-year period, 354 patients aged > 80 years were admitted with a displaced intracapsular hip fracture. Using defined clinical guidelines, 38 patients underwent THA with a median age of 84 years, mean follow-up of 20 months. Primary outcomes were dislocation, 30-day and one-year mortality, revision surgery and periprosthetic fracture. There were no dislocations or periprosthetic fractures and patient survival was 97% at 30 days and 87% at one year. There was one revision for deep infection. This study demonstrates that THA for selected octogenarians can be performed safely, allows the majority of patients to return to independent living and has a low complication rate.

The ultimate Aberdeen knot.

INTRODUCTION: The Aberdeen knot has been shown to be stronger and more secure than a surgeon's knot for ending a suture line. No data exist as to the ideal configuration of the Aberdeen knot. The Royal College of Surgeons of England in their Basic Surgical Skills Course, 2002 recommended six throws. The aim of this experiment is to find the ideal combination of throws and turns. MATERIALS AND METHODS: Aberdeen knots of various configurations were tied in 0-PDS suture (Ethicon, Johnson and Johnson). Each configuration was tied 10 times. A materials testing machine was used to test the knots to destruction in a standardised manner. RESULTS: The knots were seen to behave in two ways. They either slipped and unravelled, or broke. Knots tied with fewer than three throws were unreliable. Knots tied with three throws and two turns appear to be the strongest configuration. Adding further throws and turns does not increase the strength of an Aberdeen knot. CONCLUSIONS: An Aberdeen knot tied with three throws and two turns is the ultimate Aberdeen knot.

The accuracy of computer-assisted percutaneous iliosacral screw placement.

The benchmark fluoroscopic technique of iliosacral screw insertion is disadvantaged by its reliance on ionizing radiation and presentation of dynamic information in only one plane. Multiplane targeting requires interpolation, which may be associated with inherent errors. Computer-assisted surgery enables surgeons to monitor their screw trajectory in 3-D space. The clinical application of computer-assisted surgery requires validation of its accuracy when tested against a benchmark technique. We simulated surgical implantation of cannulated screws in 10 embalmed human cadavers. Two specimens had sacral dysplasia. We inserted 20 screws into the S1 body, the left side by the benchmark fluoroscopic technique and the right side by a fluoroscopically registered computer-assisted surgery technique. All specimens were intact with no simulated injuries. A postoperative high-definition computed tomography scan showed the screw track. The actual track was compared with the intended screw track by a graphical technique. There was no deviation from the intended screw path in any of the simulated screw paths. With both techniques, two of the 10 tracks penetrated the sacral cortex in dysplastic pelvices. A fluoroscopic computer-assisted surgery technique appears as accurate as the standard fluoroscopic technique but no more so. Caution is recommended in dysplastic pelvices.

A new and effective tension-band braided polyester suture technique for transverse patellar fracture fixation.

OBJECTIVES: Concerning the tension-band principle of internal fixation, this study aims to establish whether any difference in interfragmentary gap exists after bone-reducing forceps are released, when a recommended suture-knot technique and a new technique are tested in vitro on a purpose built machine that features a model of a transverse fracture of the patella. In addition, a standard tension-band wiring technique has also been tested as one form of control. BACKGROUND: Satisfactory compression at a fracture site reduces the risk of failure of fixation, loss of reduction (interfragmentary gap >2mm) and subsequent risks of malunion, delayed union, and ultimately non-union from excessive movement. Stainless-steel wire can provide a stable rigid construct but is associated with complications. Tension-band fixation employing a braided polyester non-absorbable suture provides a less rigid construct. However, satisfactory clinical results and fewer complications are reported. The method by which a suture is tied has an effect on initial compression provided the fracture is reduced. However, it also has an effect on the degree of fracture gap once it is subject to biomechanical distraction. METHODS: By measuring the output of a strain gauge Wheatstone bridge of a purpose built rig that had been calibrated against fracture gap and compression force, the various tension-band fixation techniques as discussed above were evaluated. RESULTS: The tension-band suture technique examined in this work (the modified Wagoner's Hitch) has been evaluated. It has quantitatively shown less fracture gap than other recognised tension-band suture and wire techniques. The results exhibit statistical significance (p<0.001). CONCLUSIONS: This evaluation study has produced quantitative and comparable data of fracture gap as observed with the model of a transverse patella fracture, for both new and established surgical techniques. The contribution this study has made to the knowledge of the subject is that a testing device similar to the one in this study may be useful in the future for conducting preliminary studies of new or established tension-band techniques. The proposed tension-band suture method tested in this dissertation provided statistically significant quantitative data, which may after further work, support its use as an alternative method in the clinical setting.