RESUMO
The estimation of natural background levels (NBLs) of dissolved concentrations of target chemical species in subsurface reservoirs relies on a proper assessment of the effects of forcing terms driving flow and transport processes taking place within the system and whose dynamics drive background concentration values. We propose coupling methodologies based on (a) global statistical analyses and (b) numerical modeling of system dynamics to distinguish between the impacts of different types of external forcing components influencing background concentration values. We focus on the joint application of a statistical methodology based on Component Separation and experimental/numerical modeling studies of groundwater flow and transport for the NBL estimation of selected chemical species in potentially contaminated coastal aquifers. We consider a site which is located in Calabria, Italy, and constitutes a typical example of a Mediterranean coastal aquifer which has been subject to intense industrial development. Our study is keyed to the characterization of NBLs of manganese and sulfate and is geared to the proper identification of the importance of a natural external forcing (i.e., seawater intrusion) on NBL assessment. Results from the Component Separation statistical approach are complemented by numerical simulations of the advective-dispersive processes that could influence the distribution of chemical species (i.e., sulfate) within the system. Estimated NBLs for manganese are consistent with the geochemical composition of soil samples. While Component Separation ascribes the largest detected sulfate concentrations to anthropogenic sources, our numerical modeling analysis suggests that they are mainly related to the natural process of seawater intrusion. Our results indicate that the use of statistical methodologies in complex groundwater systems should be assisted by a detailed characterization of the dynamics of natural (and/or induced) processes to distinguish effective anthropogenic contamination from natural conditions and to define realistic environmental clean-up goals.
Assuntos
Monitoramento Ambiental , Água Subterrânea/química , Água do Mar/análise , Poluentes Químicos da Água/análise , Itália , SalinidadeRESUMO
We investigated the role of iron (Fe) on arsenic (As) release from two samples of a natural deep soil collected in an aquifer body in the Emilia-Romagna Region, Italy. Each sample is representative of a different solid matrix, i.e., sand and vegetal matter. Batch experiments were performed by applying alternating aerobic/anaerobic conditions to the samples under a range of redox and pH conditions, consistent with the corresponding values measured in the field. Arsenic mobilization was triggered by abrupt and rapid changes in redox conditions and displayed a clear correlation with oxidation/reduction potential for both solid matrices. Vegetal matter showed high binding capacity and large As concentration release. Arsenic release was also correlated with Fe released from the solid matrices. Our results suggest that the environmentally critical As concentrations detected in some aquifers in the Emilia-Romagna Region are consistent with (a) the occurrence of high natural As content in the component of the host porous medium associated with vegetal matter and (b) the effect of possible sharp localized (and temporally oscillating) variations in redox conditions.
Assuntos
Arsênio/química , Poluentes do Solo/química , Poluentes Químicos da Água/química , Físico-Química/instrumentação , Físico-Química/métodos , Desenho de Equipamento , Água Subterrânea/química , Concentração de Íons de Hidrogênio , Ferro/química , Itália , OxirreduçãoRESUMO
The importance of estimating spatially variable aquifer parameters such as transmissivity is widely recognized for studies in resource evaluation and contaminant transport. A useful approach for mapping such parameters is inverse modeling of data from series of pumping tests, that is, via hydraulic tomography. This inversion of field hydraulic tomographic data requires development of numerical forward models that can accurately represent test conditions while maintaining computational efficiency. One issue this presents is specification of boundary and initial conditions, whose location, type, and value may be poorly constrained. To circumvent this issue when modeling unconfined steady-state pumping tests, we present a strategy that analyzes field data using a potential difference method and that uses dipole pumping tests as the aquifer stimulation. By using our potential difference approach, which is similar to modeling drawdown in confined settings, we remove the need for specifying poorly known boundary condition values and natural source/sink terms within the problem domain. Dipole pumping tests are complementary to this strategy in that they can be more realistically modeled than single-well tests due to their conservative nature, quick achievement of steady state, and the insensitivity of near-field response to far-field boundary conditions. After developing the mathematical theory, our approach is first validated through a synthetic example. We then apply our method to the inversion of data from a field campaign at the Boise Hydrogeophysical Research Site. Results from inversion of nine pumping tests show expected geologic features, and uncertainty bounds indicate that hydraulic conductivity is well constrained within the central site area.
Assuntos
Tomografia/métodos , Movimentos da Água , Monitoramento Ambiental/métodos , Modelos TeóricosRESUMO
Ground water flow associated with pumping and injection tests generates self-potential signals that can be measured at the ground surface and used to estimate the pattern of ground water flow at depth. We propose an inversion of the self-potential signals that accounts for the heterogeneous nature of the aquifer and a relationship between the electrical resistivity and the streaming current coupling coefficient. We recast the inversion of the self-potential data into a Bayesian framework. Synthetic tests are performed showing the advantage in using self-potential signals in addition to in situ measurements of the potentiometric levels to reconstruct the shape of the water table. This methodology is applied to a new data set from a series of coordinated hydraulic tomography, self-potential, and electrical resistivity tomography experiments performed at the Boise Hydrogeophysical Research Site, Idaho. In particular, we examine one of the dipole hydraulic tests and its reciprocal to show the sensitivity of the self-potential signals to variations of the potentiometric levels under steady-state conditions. However, because of the high pumping rate, the response was also influenced by the Reynolds number, especially near the pumping well for a given test. Ground water flow in the inertial laminar flow regime is responsible for nonlinearity that is not yet accounted for in self-potential tomography. Numerical modeling addresses the sensitivity of the self-potential response to this problem.
Assuntos
Teorema de Bayes , Movimentos da Água , Modelos TeóricosRESUMO
The availability of single-patient-use laparoscopic instrumentation has been important for the adoption of laparoscopic surgery. Many surgeons were first introduced to laparoscopic surgery through the use of single-patient-use instrumentation. While there are reusable alternatives in most cases, many surgeons and operating room nurses still prefer single-patient-use instruments because they are sterile, safe, reliable, innovative in design, and always available. They also offer potential long-term hospital cost savings.
Assuntos
Equipamentos Descartáveis , Laparoscópios , Custos e Análise de Custo , Equipamentos Descartáveis/economia , Desenho de Equipamento , Reutilização de Equipamento/economia , Humanos , Controle de Infecções , Laparoscopia/economia , Eliminação de Resíduos de Serviços de Saúde , EsterilizaçãoRESUMO
The inhibitory effect of triiodothyronine (T3) given in early postnatal life on Sertoli cell proliferative activity, leading to their precocious terminal differentiation, has been demonstrated previously. However, data concerning the role of thyroid hormone on androgen metabolism of Sertoli cells during the same period are still lacking. In this study we performed a time-course investigation on the effects of T3 treatment on testosterone metabolism in Sertoli cells isolated from 2-, 3- and 4-weeks-old euthyroid rats. Triiodothyronine (3 micrograms/100 g body wt) was given ip., during the last week prior to sacrifice. Sertoli cells from all animal groups initially were cultured under basal conditions during the first 24 h and subsequently in the presence of testosterone (0.5 mumol/l) with or without T3 (1 nmol/l) for an additional 24 h. This treatment given to 2-week-old animals resulted in reduced testicular growth. As far as androgen metabolism is concerned, T3 in vivo and in vitro treatment in 2- and 3-week-old animals induced a lowering of dihydrotestosterone + 3 alpha-diol with an enhancement of the two other 5 alpha-reduced androgens. The effect was much less pronounced in the oldest group. In both 2- and 3-week-old treated rats a marked reduction of oestradiol was observed, which indicates an inhibition of aromatase activity, mainly in younger animals. This enzyme has been reported to be extremely active in Sertoli cells of rats (of the same strain) between the age of 5 and 20 days, but it decreases rapidly thereafter.(ABSTRACT TRUNCATED AT 250 WORDS)
Assuntos
Células de Sertoli/metabolismo , Testosterona/metabolismo , Tri-Iodotironina/farmacologia , Fatores Etários , Animais , Peso Corporal , Células Cultivadas , Meios de Cultura/metabolismo , Seguimentos , Masculino , Ratos , Ratos Wistar , Testículo/crescimento & desenvolvimento , Testículo/metabolismoRESUMO
1. The normal activity of the medial articular nerve of the knee joint of nine dogs was measured in response to continuous passive movement. Whole nerve recordings were made simultaneously with joint position and angular velocity. 2. When the knee was moved the medial articular nerve discharged at all joint angles with maximum activity at flexion in some animals, and at extension in others. For an individual animal the discharge pattern was reproducible over several cycles of movement. 3. The discharge was direction sensitive, responding with a lesser activity whenever the joint was moved away from the extremes of movement range. 4. With higher velocities of movement, the discharge activity of the nerve increased at the ends of joint movement. 5. The results indicate that the discharge activity of the whole medial articular nerve is influenced not only by joint position but also by the velocity and acceleration of movement. This may reflect changes in the tension of capsular and extra-capsular tissues.