RESUMO
The origin of metal elements in tonsillar tissues of children patients was investigated in order to establish the link between environmental pollution and tonsilitis diagnosis. The children lived either in a polluted, industrial region (Moravian-Silesian Region, North-East Czechia) or a clean, predominantly agricultural region (South Bohemian Region, South-East Czechia). Simultaneously, the distance of the address of the patients to the closest main road was assessed. The elemental content of the present particulate matter in the tonsil samples, coming from indicated tonsillectomies, was analysed using scanning electron microscopy equipped with an X-ray microprobe. No significant association of the elemental composition and the region was found using both bivariate and multivariate methods; however, an association with the distance to the closest main road was found. The study presents a novel assessment of the tonsillar tissues and supports the link between environmental factors (traffic-related particulate pollution) and the onset of chronic, idiopathic diseases in children, which has been debated recently.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Tonsilite , Poluição Relacionada com o Tráfego , Poluentes Atmosféricos/análise , Poluição do Ar/análise , Criança , Doença Crônica , Monitoramento Ambiental , Humanos , Sistema Linfático/química , Material Particulado/análise , Projetos Piloto , Poluição Relacionada com o Tráfego/análiseRESUMO
Spent coffee ground (SCG) is an environmental nuisance material, but, if appropriately processed it can be converted into pellets, and thus, used as an energy source. The moisture content of the final product should be below 10%, to ensure safe storage, and elimination of microorganism growth (particularly moulds). The present study aims to identify the optimal drying process for removing moisture from SCG and to investigate changes to the composition of SCG due to drying, at temperatures around 75 °C, so that the dried SCG to qualify as renewable energy source. Three drying processes were employed for SCG drying (with initial moisture content of about 65%): oven drying, solar drying and open air sun drying, while SCG samples were placed in aluminium trays with thicknesses of 1.25, 2.5 and 4 cm. Based on the experimental results for SCG samples with thickness 2.5 cm, the open air sun drying process required 10 h to reach final moisture content of 37%, while solar drying achieved 10% moisture content in 10 h and oven drying achieved 7% moisture content in 6 h. The solar drying process proved as the most advantageous, due to low energy requirements and adequate quality of dried SCG. Also, experiments indicated that SCG storage at "normal room conditions" resulted to equilibrium moisture content in SCG of 8%, regardless of the initial moisture content. Furthermore, instrumental analyses of the SCG, revealed changes to its composition for a number of chemical groups, such as aldehydes, ketones, phytosterols, alkaloids, lactones, alcohols, phenols, pyrans and furans, among others. It was also identified that the SCG colour was affected due to the drying process.
Assuntos
Café , Dessecação , Fenóis , Energia Renovável , TemperaturaRESUMO
The aim of the study was to investigate the influence of the barley cleaning process in relation to physical properties. The knowledge of the range of changes in the physical parameters of processed material and their mutual relationships is required for the design and implementation of various technological processes. In this study were compared the input and output commodities in the primary postharvest cleaning process of undesirable components-occurring as admixtures of fine and coarse barley impurities as well as the barley component itself. An efficient cleaning process ensuring barley grain quality is a basic step in beer production. Therefore, seven bred varieties of brewing barley (Malz, Sebastian, Francin, KWS Irina1, KWS Irina2, Bojos, and Laudis) were tested for the qualitative assessment of the cleaning process. Physical parameters such as granulometry, bulk and tapped density, angle of repose, internal and wall friction angle, and flow functions were determined for all samples. In order to identify whether the barley variety or the sample cleaning significantly influences the determined physical properties, two-way ANOVA was applied. The results imply that barley cleaning had the main influence on wall friction angle, while the barley variety had a significant effect on effective internal friction. Moreover, the mechanical postharvest cleaning process reduces the overall wall friction.
RESUMO
Chlorophyll content in leaves is a convenient indicator of the physiological state of the plant following exposure to a stressor. In the present study, a pot experiment was carried out using two medicinal plant species - peppermint (Mentha X piperita L.) and common sage (Salvia officinalis L.) to determine the link between the chlorophyll content in the plant leaves and the exposure of the plants to nano-TiO2 either through the leaves (in suspension) or through the root system (in soil). Following the exposure, the shoots were analysed for the contents of Ti, Al, Ca, K, Mg, Mn, Na and chlorophyll. Significant decrease in chlorophyll content was observed in all but one of the nano-TiO2 treatments, the differences in the determined element content were mostly species-dependent: Ti exposure was found to be related to the decrease in the chlorophyll and Mn content in both species as well as to the decrease in Mg content in common sage.
Assuntos
Clorofila/metabolismo , Plantas Medicinais/metabolismo , Titânio/farmacologia , Antioxidantes , Mentha piperita , Extratos Vegetais , Folhas de Planta/metabolismo , Raízes de Plantas , Salvia officinalis , Sódio/análise , Titânio/análiseRESUMO
The study aimed to apply novel source classification tool for local scale air pollution assessment reducing the total number of organic compounds in the model. Samples of particulate matter (PM) were collected in the town of Napajedla (South-eastern Czech Republic) in 2016. The industrial sector of the town is represented by plastics processing and manufacturing, as well as by mechanical engineering. Analytical technique of pyrolysis chromatography with mass spectroscopy detection was employed to identify organic species in the PM10 fraction. Two datasets (465 determined organic compounds and 50 selected organic markers) were used and compared by multivariate analysis - principal component analysis followed with hierarchical clustering on principal components incorporating compositional data approach. Three resulting clusters were observed in both cases. The cluster representing measurements near plastic processing and manufacturing plants was identical in both the analysed datasets with the same organic compounds that characterized resulting cluster Consequently, leading markers for plastic processing and manufacturing sources were suggested (bumetrizole, bis(tridecyl)phthalate, mono(2-ethylhexyl)phthalate). Other two clusters varied among the analysed datasets, however, dataset with selected markers showed more reliable outcomes. The results imply that concept of using only selected organic marker species with the compositional approach in multivariate statistical methods is sufficient and allows properly distinguishing the main air pollution sources between sampling locations even at a small urban scale.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , República Tcheca , Monitoramento Ambiental , Análise Multivariada , Material ParticuladoRESUMO
With the continuously growing production of nanomaterials, their presence in the environment increases. The effects of nanoparticle exposure on plants are yet not fully understood. This study aimed to provide new insights into the stress induced by the exposure of plants to nanoparticles via the determination of the content of L-ascorbic acid, known antioxidant, in the samples of bryophyte species Pleurozium schreberi (Brid.) Mitt. Bryophyte samples, collected from a pristine environment, were exposed to 0.1 g·L-1 suspensions of nano-ZnO for five weeks. Prior to the exposure, the samples were subjected to the combination of treatments-washing or not washing as well as drying or irrigation. In order to assess the level of oxidative stress caused by the exposure to the ZnO nanoparticles under various pre-treatment conditions, the content of the L-ascorbic acid in the samples was determined by titration with dichlorophenolindophenol. Effect of both nano-ZnO exposure and pre-treatment was observed; nano-ZnO exposure significantly reduced the content of L-ascorbic acid in the bryophyte samples indicating it being consumed in the repair processes following the exposure-related physiological stress.
Assuntos
Nanopartículas Metálicas , Óxido de Zinco , Antioxidantes/metabolismo , Ácido Ascórbico , Nanopartículas Metálicas/toxicidade , Nanopartículas/toxicidade , Estresse Oxidativo , Óxido de Zinco/toxicidadeRESUMO
The aim of the study was to characterize vertical distribution of particulate matter, in an area well known by highest air pollution levels in Europe. A balloon filled with helium with measuring instrumentation was used for vertical observation of air pollution over the fugitive sources in Moravian-Silesian metropolitan area during spring and summer. Synchronously, selected meteorological parameters were recorded together with particulate matter for exploration its relationship with particulate matter. Concentrations of particulate matter in the vertical profile were significantly higher in the spring than in the summer. Significant effect of fugitive sources was observed up to the altitude â¼255 m (â¼45 m above ground) in both seasons. The presence of inversion layer was observed at the altitude â¼350 m (120-135 m above ground) at locations with major source traffic load. Both particulate matter concentrations and number of particles for the selected particle sizes decreased with increasing height. Strong correlation of particulate matter with meteorological parameters was not observed. The study represents the first attempt to assess the vertical profile over the fugitive emission sources - old environmental burdens in industrial region.