Transition metal-substituted polyoxometalate-ionic liquids with remarkable flame retardancy performance.

The development of effective and novel flame retardants has been attracting considerable attention in extenuating the fire threat of flammable polymer materials including the widely-used epoxy resins. In this work, we pioneeringly report the construction of transition-metal-substituted polyoxometalate-ionic liquids (tmsPOM-ILs) as effective flame retardants, which consist of tetra-metal-containing POMs ([M4(H2O)2(PW9O34)2]10-, M4P2, M = Ni, Cu) anions and tetra-n-heptylammonium [(n-C7H15)4N+, THPA] cations. The resulting tmsPOM-ILs exhibited remarkably improved fire-safety of the epoxy resin (EP) matrix and even at a loading amount of as low as 3 wt%, the flame retardancy efficiency was even higher than that of commercial flame retardants (aluminum hydroxide (ATH), triphenyl phosphate (TPP), and decabromodiphenyl ethane (DBDPE)). Physicochemical and mechanistic studies revealed that the remarkable flame retardancy performance of the tmsPOM-ILs reported is due to their excellent epoxy matrix compatibility and remarkable catalytic charring ability. This work opens up a brand-new research direction of developing next-generation compatible and effective tmsPOM-based molecular flame retardants at the molecular level.

Light-Induced Charge Separation in Covalently Linked BODIPY-Quinone-Alkyne Dyads.

Visible light-induced charge separation and directional charge transfer are cornerstones for artificial photosynthesis and the generation of solar fuels. Here, we report synthetic access to a series of noble metal-free donor-acceptor dyads based on bodipy light-absorbers and redox-active quinone/anthraquinone charge storage sites. Peripheral functionalization of the quinone/anthraquinone units with alkynes primes the dyads for integration into a range of light-harvesting systems, e. g., by Cu-catalyzed cycloadditions (CLICK chemistry) or Pd-catalyzed C-C cross-coupling reactions. Initial photophysical, electrochemical and theoretical analyses reveal the principal processes during the light-induced charge separation in the reported dyads.

Poly(dehydroalanine)-Based Hydrogels as Efficient Soft Matter Matrices for Light-Driven Catalysis.

Soft matter integration of photosensitizers and catalysts provides promising solutions to developing sustainable materials for energy conversion. Particularly, hydrogels bring unique benefits, such as spatial control and 3D-accessibility of molecular units, as well as recyclability. Herein, the preparation of polyampholyte hydrogels based on poly(dehydroalanine) (PDha) is reported. Chemically crosslinked PDha with bis-epoxy poly(ethylene glycol) leads to a transparent, self-supporting hydrogel. Due to the ionizable groups on PDha, this 3D polymeric matrix can be anionic, cationic, or zwitterionic depending on the pH value, and its high density of dynamic charges has a potential for electrostatic attachment of charged molecules. The integration of the cationic molecular photosensitizer [Ru(bpy)3 ]2+ (bpy = 2,2'-bipyridine) is realized, which is a reversible process controlled by pH, leading to light harvesting hydrogels. They are further combined with either a thiomolybdate catalyst ([Mo3 S13 ]2- ) for hydrogen evolution reaction (HER) or a cobalt polyoxometalate catalyst (Co4 POM = [Co4 (H2 O)2 (PW9 O34 )2 ]10- ) for oxygen evolution reaction (OER). Under the optimized condition, the resulting hydrogels show catalytic activity in both cases upon visible light irradiation. In the case of OER, higher photosensitizer stability is observed compared to homogeneous systems, as the polymer environment seems to influence decomposition pathways.

Thiomolybdate Clusters: From Homogeneous Catalysis to Heterogenization and Active Sites.

Thiomolybdates are molecular molybdenum-sulfide clusters formed from Mo centers and sulfur-based ligands. For decades, they have attracted the interest of synthetic chemists due to their unique structures and their relevance in biological systems, e.g., as reactive sites in enzymes. More recently, thiomolybdates are explored from the catalytic point of view and applied as homogeneous and molecular mimics of heterogeneous molybdenum sulfide catalysts. This review summarizes prominent examples of thiomolybdate-based electro- and photocatalysis and provides a comprehensive analysis of their reactivities under homogeneous and heterogenized conditions. Active sites of thiomolybdates relevant for the hydrogen evolution reaction are examined, aiming to shed light on the link between cluster structure and performance. The shift from solution-phase to surface-supported thiomolybdates is discussed with a focus on applications in electrocatalysis and photocatalysis. The outlook highlights current trends and emerging areas of thiomolybdate research, ending with a summary of challenges and key takeaway messages based on the state-of-the-art research.

Hydrogenation Catalysis by Hydrogen Spillover on Platinum-Functionalized Heterogeneous Boronic Acid-Polyoxometalates.

The activation of molecular hydrogen is a key process in catalysis. Here, we demonstrate how polyoxometalate (POM)-based heterogeneous compounds functionalized with Platinum particles activate H2 by synergism between a hydrogen spillover mechanism and electron-proton transfer by the POM. This interplay facilitates the selective catalytic reduction of olefins and nitroarenes with high functional group tolerance. A family of polyoxotungstates covalently functionalized with boronic acids is reported. In the solid-state, the compounds are held together by non-covalent interactions (π-π stacking and hydrogen bonding). The resulting heterogeneous nanoscale particles form stable colloidal dispersions in acetonitrile and can be surface-functionalized with platinum nanoparticles by in situ photoreduction. The resulting materials show excellent catalytic activity in hydrogenation of olefins and nitrobenzene derivatives under mild conditions (1 bar H2 and room temperature).

Initial Quenching Efficiency Determines Light-Driven H2 Evolution of [Mo3 S13 ]2- in Lipid Bilayers.

Nature uses reactive components embedded in biological membranes to perform light-driven photosynthesis. Here, a model artificial photosynthetic system for light-driven hydrogen (H2 ) evolution is reported. The system is based on liposomes where amphiphilic ruthenium trisbipyridine based photosensitizer (RuC9 ) and the H2 evolution reaction (HER) catalyst [Mo3 S13 ]2- are embedded in biomimetic phospholipid membranes. When DMPC was used as the main lipid of these light-active liposomes, increased catalytic activity (TONCAT ~200) was observed compared to purely aqueous conditions. Although all tested lipid matrixes, including DMPC, DOPG, DPPC and DOPG liposomes provided similar liposomal structures according to TEM analysis, only DMPC yielded high H2 amounts. In situ scanning electrochemical microscopy (SECM) measurements using Pd microsensors revealed an induction period of around 26 minutes prior to H2 evolution, indicating an activation mechanism which might be induced by the fluid-gel phase transition of DMPC at room temperature. Stern-Volmer-type quenching studies revealed that electron transfer dynamics from the excited state photosensitizer are most efficient in the DMPC lipid environment giving insight for design of artificial photosynthetic systems using lipid bilayer membranes.

Coupled reaction equilibria enable the light-driven formation of metal-functionalized molecular vanadium oxides.

The introduction of metal sites into molecular metal oxides, so-called polyoxometalates, is key for tuning their structure and reactivity. The complex mechanisms which govern metal-functionalization of polyoxometalates are still poorly understood. Here, we report a coupled set of light-dependent and light-independent reaction equilibria controlling the mono- and di-metal-functionalization of a prototype molecular vanadium oxide cluster. Comprehensive mechanistic analyses show that coordination of a Mg2+ ion to the species {(NMe2H2)2[VV12O32Cl]}3- results in formation of the mono-functionalized {(NMe2H2)[(MgCl)VV12O32Cl]}3- with simultaneous release of a NMe2H2+ placeholder cation. Irradiation of this species with visible light results in one-electron reduction of the vanadate, exchange of the second NMe2H2+ with Mg2+, and formation/crystallization of the di-metal-functionalized [(MgCl)2VIVVV11O32Cl]4-. Mechanistic studies show how stimuli such as light or competing cations affect the coupled equilibria. Transfer of this synthetic concept to other metal cations is also demonstrated, highlighting the versatility of the approach.

Evaluating the durability and performance of polyoxometalate-ionic liquid coatings on calcareous stones: Preventing biocolonisation in outdoor environments.

Rock-based materials exposed to outdoor environments are naturally colonised by an array of microorganisms, which can cause dissolution and fracturing of the natural stone. Biocolonisation of monuments and architectures of important cultural heritage therefore represents an expensive and recurring problem for local authorities and private owners alike. In this area, preventive strategies to mitigate biocolonisation are generally preferred to curative approaches, such as mechanical cleaning by brush or high-pressure cleaning, to remove pre-existing patina. The aim of this work was to study the interaction between biocidal polyoxometalate-ionic liquid (POM-IL) coatings and calcareous stones and evaluate the capacity of these coatings to prevent biocolonisation through a series of accelerated ageing studies in climate chambers, carried out in parallel with a two-year period of outdoor exposure in north-eastern France. Our experiments show that POM-IL coatings did not affect water vapour transfer nor significantly alter the total porosity of the calcareous stones. Simulated weathering studies replicating harsh (hot and wet) climatic weather conditions demonstrated that the colour variation of POM-IL-coated stones did not vary significantly with respect to the natural uncoated stones. Accelerated biocolonisation studies performed on the weathered POM-IL-coated stones proved that the coatings were still capable of preventing colonisation by an algal biofilm. However, a combination of colour measurements, chlorophyll fluorescence data, and scanning electron microscopy imaging of stones aged outdoors in northern France for two years showed that coated and uncoated stone samples showed signs of colonisation by fungal mycelium and phototrophs. Altogether, our results demonstrate that POM-ILs are suitable as preventative biocidal coatings for calcareous stones, but the correct concentrations must be chosen to achieve a balance between porosity of the stone, the resulting colour variation and the desired duration of the biocidal effect over longer periods of time, particularly in outdoor environments.

Diiodo-BODIPY Sensitizing of the [Mo3S13]2- Cluster for Noble-Metal-Free Visible-Light-Driven Hydrogen Evolution within a Polyampholytic Matrix.

We report on a photocatalytic setup that utilizes the organic photosensitizer (PS) diiodo-BODIPY and the non-precious-metal-based hydrogen evolution reaction (HER) catalyst (NH4)2[Mo3S13] together with a polyampholytic unimolecular matrix poly(dehydroalanine)-graft-poly(ethylene glycol) (PDha-g-PEG) in aqueous media. The system shows exceptionally high performance with turnover numbers (TON > 7300) and turnover frequencies (TOF > 450 h-1) that are typical for noble-metal-containing systems. Excited-state absorption spectra reveal the formation of a long-lived triplet state of the PS in both aqueous and organic media. The system is a blueprint for developing noble-metal-free HER in water. Component optimization, e.g., by modification of the meso substituent of the PS and the composition of the HER catalyst, is further possible.

Multimodal Analysis of Light-Driven Water Oxidation in Nanoporous Block Copolymer Membranes.

Heterogeneous light-driven catalysis is a cornerstone of sustainable energy conversion. Most catalytic studies focus on bulk analyses of the hydrogen and oxygen evolved, which impede the correlation of matrix heterogeneities, molecular features, and bulk reactivity. Here, we report studies of a heterogenized catalyst/photosensitizer system using a polyoxometalate water oxidation catalyst and a model, molecular photosensitizer that were co-immobilized within a nanoporous block copolymer membrane. Via operando scanning electrochemical microscopy (SECM), light-induced oxygen evolution was determined using sodium peroxodisulfate (Na2 S2 O8 ) as sacrificial electron acceptor. Ex situ element analyses provided spatially resolved information on the local concentration and distribution of the molecular components. Infrared attenuated total reflection (IR-ATR) studies of the modified membranes showed no degradation of the water oxidation catalyst under the reported light-driven conditions.

Mechanistic insights into template-driven polyoxovanadate self-assembly: the role of internal and external templates.

The self-assembly of molecular metal oxides, polyoxometalates (POMs), can be controlled using internal or, more rarely, external templates. Here, we explore how the interplay between internal templates (halides, oxoanions) and organic external templates (protonated cyclene species) affect the self-assembly of a model polyoxovanadate cluster, [V12O32X]n- (X = Cl-, Br-, NO3-). A combination of crystallographic analyses, spectroscopic studies and in situ as well as solid-state 51V NMR spectroscopy provide critical insights into the initial formation of an intermediate vanadate species formed during the process. Structural and spectroscopic studies suggest that a direct interaction between internal and external templates allows tuning of the internal template position within the cluster cavity. These insights form the basis for further developing the template-driven synthetic chemistry of polyoxovanadates.

Initial Steps of the Acid-Catalyzed Polyoxometalate-Functionalization with Phosphonic Acid Esters.

The organo-functionalization of metal oxides is a key strategy to introduce new functionalities. Often, phosphonates are used to anchor organic moieties to a range of metal oxides. Despite their widespread use, there is a lack of understanding of the parameters which enable selective and efficient formation of organophosphonate-metal oxide hybrids. Here, we report fundamental insights into the mechanism of phosphonate anchoring to a molecular metal oxide model. Specifically, we use in situ 31P NMR spectroscopy to follow the acid-catalyzed deprotection of a model phosphonate and its subsequent condensation to form a phosphonate-functionalized Dawson-polyoxometalate. Our study shows that the nucleophilicity of the acid anion is a key parameter which controls the clean and selective deprotection and polyoxometalate attachment of phosphonates. This insight will allow researchers to expand the scope of phosphonate anchoring to metal oxides by enabling the development of mild and scalable syntheses.

Supramolecular Aggregation Control in Polyoxometalates Covalently Functionalized with Oligoaromatic Groups.

CLICK-chemistry has become a universal route to covalently link organic molecules functionalized with azides and alkynes, respectively. Here, we report how CLICK-chemistry can be used to attach oligoaromatic organic moieties to Dawson-type polyoxometalates. In step one, the lacunary Dawson anion [α2 -P2 W17 O61 ]6- is functionalized with phosphonate anchors featuring peripheral azide groups. In step two, this organic-inorganic hybrid undergoes microwave-assisted CLICK coupling. We demonstrate the versatility of this route to access a series of Dawson anions covalently functionalized with oligoaromatic groups. The supramolecular chemistry and aggregation of these systems in solution is explored, and we report distinct changes in charge-transfer behavior depending on the size of the oligoaromatic π-system.

First Ultrathin Pure Polyoxometalate 2D Material as a Peroxidase-Mimicking Catalyst for Detecting Oxidative Stress Biomarkers.

Although two-dimensional (2D) materials with ultrathin geometry and extraordinary electrical attributes have attracted substantial concern, exploiting new-type 2D materials is still a great challenge. In this work, an unprecedented single-layer pure polyoxometalate (POM) 2D material (2D-1) was prepared by ultrasonically exfoliating a one-dimensional (1D)-chain heterometallic crystalline germanotungstate Na4[Ho(H2O)6]2[Fe4(H2O)2(pic)6Ge2W20O72]·16H2O (1) (Hpic = picolinic acid). The 1D polymeric chain of 1 is assembled from particular {Ge2W20}-based [Fe4(H2O)2(pic)6Ge2W20O72]10- segments through bridging [Ho(H2O)6]3+ cations. 2D-1 is formed by π-π interaction driving force among adjacent 1D polymeric chains of 1. Also, the peroxidase-mimicking properties of 2D-1 toward detecting H2O2 were evaluated and good detection result was observed with a limit of detection (LOD) of 58 nM. Density functional theory (DFT) calculation further confirms that 2D-1 displays outstanding catalytic activity and active sites are located on Fe centers and Hpic ligands. Under the catalysis of uricase, uric acid can be transformed to allantoin and H2O2, and then, H2O2 oxidizes TMB to its blue ox-TMB in the presence of 2D-1 as a catalyst. Then, we utilized this cascade reaction to detect uric acid, which also exhibits prominent results. This research opens a door to prepare ultrathin pure POM 2D materials and broadens the scope of potential applications of POMs in biology and iatrology.

POM@ZIF Derived Mixed Metal Oxide Catalysts for Sustained Electrocatalytic Oxygen Evolution.

The design of efficient and stable oxygen evolution reaction (OER) catalysts based on noble-metal-free materials is crucial for energy conversion and storage. In this work, it was demonstrated how polyoxometalate (POM)-doped ZIF-67 can be converted into a stable oxygen evolution electrocatalyst by chemical etching, cation exchange, and thermal annealing steps. Characterization by X-ray photoelectron spectroscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy and Raman spectroscopy indicate that POM-doped ZIF-67 derived carbon-supported metal oxides were synthesized. The resulting composite shows structural and compositional advantages which lead to low overpotential (306 mV at j=10 mA ⋅ cm-2 ) and long-term stability under harsh OER conditions (1.0 M aqueous KOH).

Cation-controlled capture of polyoxovanadate-based organic-inorganic 1D architectures.

Metal cations are used to control the selective crystallization of organic-inorganic supramolecular polymers. Two complementary monomers, a dodecanuclear vanadate [V12O32(NO3)]5- and the organic macrocycle cyclen assemble into hybrid host-guest aggregates. In the presence of Ba2+ or La3+, supramolecular polymerization and crystallization is driven by a complex interplay of cyclene protonation, hydrogen-bonding and electrostatics.

Surface Anchoring and Active Sites of [Mo3S13]2- Clusters as Co-Catalysts for Photocatalytic Hydrogen Evolution.

Achieving light-driven splitting of water with high efficiency remains a challenging task on the way to solar fuel exploration. In this work, to combine the advantages of heterogeneous and homogeneous photosystems, we covalently anchor noble-metal- and carbon-free thiomolybdate [Mo3S13]2- clusters onto photoactive metal oxide supports to act as molecular co-catalysts for photocatalytic water splitting. We demonstrate that strong and surface-limited binding of the [Mo3S13]2- to the oxide surfaces takes place. The attachment involves the loss of the majority of the terminal S2 2- groups, upon which Mo-O-Ti bonds with the hydroxylated TiO2 surface are established. The heterogenized [Mo3S13]2- clusters are active and stable co-catalysts for the light-driven hydrogen evolution reaction (HER) with performance close to the level of the benchmark Pt. Optimal HER rates are achieved for 2 wt % cluster loadings, which we relate to the accessibility of the TiO2 surface required for efficient hole scavenging. We further elucidate the active HER sites by applying thermal post-treatments in air and N2. Our data demonstrate the importance of the trinuclear core of the [Mo3S13]2- cluster and suggest bridging S2 2- and vacant coordination sites at the Mo centers as likely HER active sites. This work provides a prime example for the successful heterogenization of an inorganic molecular cluster as a co-catalyst for light-driven HER and gives the incentive to explore other thio(oxo)metalates.

Comparative Evaluation of Light-Driven Catalysis: A Framework for Standardized Reporting of Data.

Light-driven homogeneous and heterogeneous catalysis require a complex interplay between light absorption, charge separation, charge transfer, and catalytic turnover. Optical and irradiation parameters as well as reaction engineering aspects play major roles in controlling catalytic performance. This multitude of factors makes it difficult to objectively compare light-driven catalysts and provide an unbiased performance assessment. This Scientific Perspective highlights the importance of collecting and reporting experimental data in homogeneous and heterogeneous light-driven catalysis. A critical analysis of the benefits and limitations of the commonly used experimental indicators is provided. Data collection and reporting according to FAIR principles is discussed in the context of future automated data analysis. The authors propose a minimum dataset as a basis for unified collecting and reporting of experimental data in homogeneous and heterogeneous light-driven catalysis. The community is encouraged to support the future development of this parameter list through an open online repository.