Stabilizing the Bulk-Phase and Solid Electrolyte Interphase of Silicon Microparticle Anode by Constructing Gradient-Hierarchically Ordered Conductive Networks.

The poor bulk-phase and interphase stability, attributable to adverse internal stress, impede the cycling performance of silicon microparticles (µSi) anodes and the commercial application for high-energy-density lithium-ion batteries. In this work, a groundbreaking gradient-hierarchically ordered conductive (GHOC) network structure, ingeniously engineered to enhance the stability of both bulk-phase and the solid electrolyte interphase (SEI) configurations of µSi, is proposed. Within the GHOC network architecture, two-dimensional (2D) transition metal carbides (Ti3C2Tx) act as a conductive "brick", establishing a highly conductive inner layer on µSi, while the porous outer layer, composed of one-dimensional (1D) Tempo-oxidized cellulose nanofibers (TCNF) and polyacrylic acid (PAA) macromolecule, functions akin to structural "rebar" and "concrete", effectively preserves the tightly interconnected conductive framework through multiple bonding mechanisms, including covalent and hydrogen bonds. Additionally, Ti3C2Tx enhances the development of a LiF-enriched SEI. Consequently, the µSi-MTCNF-PAA anode presents a high discharge capacity of 1413.7 mAh g-1 even after 500 cycles at 1.0 C. Moreover, a full cell, integrating LiNi0.8Mn0.1Co0.1O2 with µSi-MTCNF-PAA, exhibits a capacity retention rate of 92.0% following 50 cycles. This GHOC network structure can offer an efficacious pathway for stabilizing both the bulk-phase and interphase structure of anode materials with high volumetric strain.

High-Voltage Na0.76Ni0.25-x/2Mgx/2Mn0.75O2-xFx Cathode Improved by One-Step In Situ MgF2 Doping with Superior Low-Temperature Performance and Extra-Stable Air Stability.

P2-NaxMnO2 has garnered significant attention due to its favorable Na+ conductivity and structural stability for large-scale energy storage fields. However, achieving a balance between high energy density and extended cycling stability remains a challenge due to the Jahn-Teller distortion of Mn3+ and anionic activity above 4.1 V. Herein, we propose a one-step in situ MgF2 strategy to synthesize a P2-Na0.76Ni0.225Mg0.025Mn0.75O1.95F0.05 cathode with improved Na-storage performance and decent water/air stability. By partially substituting cost-effective Mg for Ni and incorporating extra F for O, the optimized material demonstrates both enhanced capacity and structure stability via promoting Ni2+/Ni4+ and oxygen redox activity. It delivers a high capacity of 132.9 mA h g-1 with an elevated working potential of ≈3.48 V and maintains ≈83.0% capacity retention after 150 cycles at 100 mA g-1 within 2-4.3 V, compared to the 114.9 mA h g-1 capacity and 3.32 V discharging potential of the undoped Na0.76Ni0.25Mn0.75O2. While increasing the charging voltage to 4.5 V, 133.1 mA h g-1 capacity and 3.55 V discharging potential (vs Na/Na+) were achieved with 72.8% capacity retention after 100 cycles, far beyond that of the pristine sample (123.7 mA h g-1, 3.45 V, and 43.8%@100 cycles). Moreover, exceptional low-temperature cycling stability is achieved, with 95.0% after 150 cycles. Finally, the Na-storage mechanism of samples employing various doping strategies was investigated using in situ EIS, in situ XRD, and ex situ XPS techniques.

Enabling Stable and Low-Strain Lithium Plating/Stripping with 2D Layered Transition Metal Carbides by Forming Li-Zipped MXenes and a Li Halide-Rich Solid Electrolyte Interphase.

Two-dimensional (2D) layered materials demonstrate prominent advantage in regulating lithium plating/stripping behavior by confining lithium diffusion/plating within interlayer gaps. However, achieving effective interlayer confined lithium diffusion/plating without compromising the stability of bulk-structural and the solid electrolyte interphase (SEI) remains a considerable challenge. This paper presents an electrochemical scissor and lithium zipper-driven protocol for realizing interlayer confined lithium plating with pretty-low strain and volume change. In this protocol, lithium serves as a "zipper" to reunite the adjacent MXene back to MAX-like phase to markedly enhance the structural stability, and a lithium halide-rich SEI is formed by electrochemically removing the terminals of halogenated MXenes to maintain the stability and rapid lithium ions diffusion of SEI. When the Ti3 C2 I2 serves as the host for lithium plating, the average coulomb efficiency exceeds 97.0 % after 320 lithium plating/stripping cycles in conventional ester electrolyte. Furthermore, a full cell comprising of LiNi0.8 Mn0.1 Co0.1 O2 and Ti3 C2 I2 @Li exhibits a capacity retention rate of 73.4 % after 200 cycles even under high cathode mass-loading (20 mg cm-2 ) and a low negative/positive capacity ratio of 1.4. Our findings advance the understanding of interlayer confined lithium plating in 2D layered materials and provide a new direction in regulating lithium and other metal plating/stripping behaviors.

Enabling High-Performance Layered Li-Rich Oxide Cathodes by Regulating the Formation of Integrated Cation-Disordered Domains.

Layered Li-rich oxide cathode materials are capable of offering high energy density due to their cumulative cationic and anionic redox mechanism during (de)lithiation process. However, the structural instability of the layered Li-rich oxide cathode materials, especially in the deeply delitiated state, results in severe capacity and voltage degradation. Considering the minimal isotropic structural evolution of disordered rock salt oxide cathode during cycling, cation-disordered nano-domains have been controllably introduced into layered Li-rich oxides by co-doping of d0 -TM and alkali ions. Combining electrochemical and synchrotron-based advanced characterizations, the incorporation of the phase-compatible cation-disordered domains can not only hinder the oxygen framework collapse along the c axis of layered Li-rich cathode under high operation voltage but also promote the Mn and anionic activities as well as Li+ (de)intercalation kinetics, leading to remarkable improvement in rate capability and mitigation of capacity and voltage decay. With this unique layered/rocksalt intergrown structure, the intergrown cathode yields an ultrahigh capacity of 288.4 mAh g-1 at 0.1 C, and outstanding capacity retention of ≈90.0% with obviously suppressed voltage decay after 100 cycles at 0.5, 1, and 2 C rate. This work provides a new direction toward advanced cathode materials for next-generation Li-ion batteries.

Piezoelectric Interlayer Enabling a Rechargeable Quasisolid-State Sodium Battery at 0 °C.

Solid-state sodium (Na) batteries (SSNBs) hold great promise but suffer from several major issues, such as high interfacial resistance at the solid electrolyte/electrode interface and Na metal dendrite growth. To address these issues, a piezoelectric interlayer design for an Na3Zr2Si2PO12 (NZSP) solid electrolyte is proposed herein. Two typical piezoelectric films, AlN and ZnO, coated onto NZSP function as interlayers designed to generate a local stress-induced field for alleviating interfacial charge aggregation coupling stress concentration and promoting uniform Na plating. The results reveal that the interlayer (ZnO) with matched modulus, high Na-adhesion, and sufficient piezoelectricity can provide a favorable interphase. Low interfacial resistances of 91 and 239 Ω cm2 are achieved for the ZnO layer at 30 and 0 °C, respectively, which are notably lower than those for bare NZSP. Moreover, steady Na plating/stripping cycles are rendered over 850 and 4900 h at 0 and 30 °C, respectively. The superior anodic performance is further manifested in an Na2MnFe(CN)6-based full cell which delivers discharge capacities of 125 mA h g-1 over 1600 cycles at 30 °C and 90 mA h g-1 over 500 cycles at 0 °C. A new interlayer-design insight is clearly demonstrated for SSNBs breaking low-temperature limits.

Flexible Li-CO2 Batteries with Boosted Reaction Kinetics and Cyclelife Enabled by Heterostructured Mo3 N2 @TiN Cathode and Interface-protected Li Anode.

With theoretically endowing with high energy densities and environmentally friendly carbon neutralization ability, flexible fiber-shaped Li-CO2 battery emerges as a multipurpose platform for next-generation wearable electronics. Nevertheless, the ineluctable issues faced by cathode catalysts and Li anodes have brought enormous obstacles to the development of flexible fiber-shaped Li-CO2 batteries. Herein, a flexible fiber-shaped Li-CO2 battery based on Mo3 N2 cathode coating with atomic layer deposited TiN and Li3 N protected Li anode is constructed. Owing to the regulation surface electrons of Mo3 N2 by TiN, heterostructured cathode has more delocalized electrons which enable cathodes to stabilize 2-electron intermediate products Li2 C2 O4 by electron bridge bonds and avoid disproportionation into Li2 CO3 . Li3 N layers not only accelerate Li+ transportation but also avoid contact between Li and CO2 to form Li2 CO3 . Thus, the constructed Li-CO2 battery demonstrates a low charge potential of 3.22 V, low overpotential of 0.56 V, outstanding rate capabilities up to 1 A g-1 , and excellent long-term cycling (≈2000 h) with an energy efficiency of ≈80%. The fabricated flexible fiber-shaped Li-CO2 battery shows an ultrahigh energy density of 14 772.5 Wh kg-1 based on cathodes (340.8 Wh kg-1 based on device mass), and outstanding deformations adaptability, giving it great potential for wearable electronics.

Novel Low-Strain Layered/Rocksalt Intergrown Cathode for High-Energy Li-Ion Batteries.

Both layered- and rocksalt-type Li-rich cathode materials are drawing great attention due to their enormous capacity, while the individual phases have their own drawbacks, such as great volume change for the layered phase and low electronic and ionic conductivities for the rocksalt phase. Previously, we have reported the layered/rocksalt intergrown cathodes with nearly zero-strain operation, while the use of precious elements hinders their industrial applications. Herein, low-cost 3d Mn4+ ions are utilized to partially replace the expensive Ru5+ ions, to develop novel ternary Li-rich cathode material Li1+x[RuMnNi]1-xO2. The as-designed Li1.15Ru0.25Mn0.2Ni0.4O2 is revealed to have a layered/rock salt intergrown structure by neutron diffraction and transmission electron microscopy. The as-designed cathode exhibits ultrahigh lithium-ion reversibility, with 0.86 (231.1 mAh g-1) out of a total Li+ inventory of 1.15 (309.1 mAh g-1). The X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectra further demonstrate that the high Li+ storage of the intergrown cathode is enabled by leveraging cationic and anionic redox activities in charge compensation. Surprisingly, in situ X-ray diffraction shows that the intergrown cathode undergoes extremely low-strain structural evolution during the charge-discharge process. Finally, the Mn content in the intergrown cathodes is found to be tunable, providing new insights into the design of advanced cathode materials for high-energy Li-ion batteries.

Accelerated aging of lithium-ion batteries: bridging battery aging analysis and operational lifetime prediction.

The exponential growth of stationary energy storage systems (ESSs) and electric vehicles (EVs) necessitates a more profound understanding of the degradation behavior of lithium-ion batteries (LIBs), with specific emphasis on their lifetime. Accurately forecasting the lifetime of batteries under various working stresses aids in optimizing their operating conditions, prolonging their longevity, and ultimately minimizing the overall cost of the battery life cycle. Accelerated aging, as an efficient and economical method, can output sufficient cycling information in short time, which enables a rapid prediction of the lifetime of LIBs under various working stresses. Nevertheless, the prerequisite for accelerated aging-based battery lifetime prediction is the consistency of aging mechanisms. This review, by comprehensively summarizing the aging mechanisms of various components within LIBs and the battery degradation mechanisms under stress-accelerated conditions, provides a reference for evaluating the consistency of battery aging mechanisms. Furthermore, this paper introduces accelerated aging-based lifetime prediction models and offers constructive suggestions for future research on accelerated lifetime prediction of LIBs.

Rechargeable Solid-State Na-Metal Battery Operating at -20 °C.

Achieving satisfactory performance for a solid-state Na-metal battery (SSNMB) with an inorganic solid electrolyte (SE), especially under freezing temperatures, poses a challenge for stabilizing a Na-metal anode. Herein, this challenge is addressed by utilizing a Natrium super ionic conductor (NASICON) NASICON-type solid electrolyte, enabling the operation of a rechargeable SSNMB over a wide temperature range from -20 to 45 °C. The interfacial resistance at the Na metal/SE interface is only 0.4 Ω cm2 at 45 °C and remains below 110 Ω cm2 even at -20 °C. Remarkably, long-term Na-metal plating/stripping cycles lasting over 2000 h at -20 °C are achieved with minimal polarization voltages at 0.1 mA cm-2 . Further analysis reveals the formation of a uniform Na3- x Cax PO4 interphase layer at the interface, which significantly contributes to the exceptional interfacial performance observed. By employing a Na3 V1.5 Al0.5 (PO4 )3 cathode, the full battery system demonstrates excellent adaptability to low temperatures, exhibiting a capacity of 80 mA h g-1 at -20 °C over 50 cycles and retaining a capacity of 108 mAh g-1 (88.5% of the capacity at 45 °C) at 0 °C over 275 cycles. This research significantly reduces the temperature threshold for SSNMB operation and paves the way toward solid-state batteries suitable for all-season applications.

Benchmarking the Effect of Particle Size on Silicon Anode Materials for Lithium-Ion Batteries.

High-capacity silicon has been regarded as one of the most promising anodes for high-energy lithium-ion batteries. However, it suffers from severe volume expansion, particle pulverization, and repeated solid electrolyte interphase (SEI) growth, which leads to rapid electrochemical failure, while the particle size also plays key role here and its effects remain elusive. In this paper, through multiple-physical, chemical, and synchrotron-based characterizations, the evolutions of the composition, structure, morphology, and surface chemistry of silicon anodes with the particle size ranging from 50 to 5 µm upon cycling are benchmarked, which greatly link to their electrochemical failure discrepancies. It is found that the nano- and micro-silicon anodes undergo similar crystal to amorphous phase transition, but quite different composition transition upon de-/lithiation; at the same time, the nano- and 1 µm-silicon samples present obviously different mechanochemical behaviors from the 5 µm-silicon sample, such as electrode crack, particle pulverization/crack as well as volume expansion; in addition, the micro-silicon samples possess much thinner SEI layer than the nano-silicon samples upon cycling, and also differences in SEI compositions. It is hoped this comprehensive study and understanding should offer critical insights into the exclusive and customized modification strategies to diverse silicon anodes ranging from nano to microscale.

Preparation of Buffered Nano-Submicron Hierarchical Structure Hollow SiOx @C Anodes for Lithium-Ion Battery Materials with Carboxymethyl Chitosan.

Silicon-based materials are among the most promising anode materials for next-generation lithium-ion batteries. However, the volume expansion and poor conductivity of silicon-based materials during the charge and discharge process seriously hinder their practical application in the field of anodes. Here, we choose carboxymethyl chitosan (CMCS) as the carbon source coating and binding on the surface of nano silicon and hollow silicon dioxide (H-SiO2 ) to form a hierarchical buffered structure of nano-hollow SiOx @C. The hollow H-SiO2 can alleviate the volume expansion of nano silicon during the lithiation process under continuous cycling. Meanwhile, the carbon layer carbonized by CMCS containing N-doping further regulates the silicon's expansion and improves the conductivity of the active materials. The as- prepared SiOx @C material exhibits an initial discharge capacity of 985.4 mAh g-1 with the decay rate of 0.27 % per cycle in 150 cycles under the current density of 0.2 A g-1 . It is proved that the hierarchical buffer structure nano-hollow SiOx @C anode material has practical application potential.

Life cycle environmental impact assessment for battery-powered electric vehicles at the global and regional levels.

As an important part of electric vehicles, lithium-ion battery packs will have a certain environmental impact in the use stage. To analyze the comprehensive environmental impact, 11 lithium-ion battery packs composed of different materials were selected as the research object. By introducing the life cycle assessment method and entropy weight method to quantify environmental load, a multilevel index evaluation system was established based on environmental battery characteristics. The results show that the Li-S battery is the cleanest battery in the use stage. In addition, in terms of power structure, when battery packs are used in China, the carbon footprint, ecological footprint, acidification potential, eutrophication potential, human toxicity cancer and human toxicity noncancer are much higher than those in the other four regions. Although the current power structure in China is not conducive to the sustainable development of electric vehicles, the optimization of the power structure is expected to make electric vehicles achieve clean driving in China.

Hopping Rate and Migration Entropy as the Origin of Superionic Conduction within Solid-State Electrolytes.

Inorganic solid-state electrolytes (SSEs) have gained significant attention for their potential use in high-energy solid-state batteries. However, there is a lack of understanding of the underlying mechanisms of fast ion conduction in SSEs. Here, we clarify the critical parameters that influence ion conductivity in SSEs through a combined analysis approach that examines several representative SSEs (Li3YCl6, Li3HoCl6, and Li6PS5Cl), which are further verified in the xLiCl-InCl3 system. The scaling analysis on conductivity spectra allowed the decoupled influences of mobile carrier concentration and hopping rate on ionic conductivity. Although the carrier concentration varied with temperature, the change alone cannot lead to the several orders of magnitude difference in conductivity. Instead, the hopping rate and the ionic conductivity present the same trend with the temperature change. Migration entropy, which arises from lattice vibrations of the jumping atoms from the initial sites to the saddle sites, is also proven to play a significant role in fast Li+ migration. The findings suggest that the multiple dependent variables such as the Li+ hopping frequency and migration energy are also responsible for the ionic conduction behavior within SSEs.

Suppressing the Dynamic Oxygen Evolution of Sodium Layered Cathodes through Synergistic Surface Dielectric Polarization and Bulk Site-Selective Co-Doping.

Utilizing anionic redox activity within layered oxide cathode materials represents a transformational avenue for enabling high-energy-density rechargeable batteries. However, the anionic oxygen redox reaction is often accompanied with irreversible dynamic oxygen evolution, leading to unfavorable structural distortion and thus severe voltage decay and rapid capacity fading. Herein, it is proposed and validated that the dynamic oxygen evolution can be effectively suppressed through the synergistic surface CaTiO3 dielectric coating and bulk site-selective Ca/Ti co-doping for layered Na2/3 Ni1/3 Mn2/3 O2 . The surface dielectric coating layer not only suppresses the surface oxygen release but more importantly inhibits the bulk oxygen migration by creating a reverse electric field through dielectric polarization. Meanwhile, the site-selective doping of oxygen-affinity Ca into Na layers and Ti into transition metal layers effectively stabilizes the bulk oxygen through modulating the O 2p band center and the oxygen migration barrier. Such a strategy also leads to a reversible structural evolution with a low volume change because of the enhanced structural integrality and improved oxygen rigidity. Because of these synergistic advantages, the designed electrode exhibits greatly suppressed voltage decay and capacity fading upon long-term cycling. This study affords a promising strategy for regulating the dynamic oxygen evolution to achieve high-capacity layered cathode materials.

Na+-Activation Engineering in the Na3V2(PO4)3 Cathode with Boosting Kinetics for Fast-Charging Na-Ion Batteries.

Na superionic conductor-structured phosphates have attracted wide interest due to their high working voltage and fast Na+ migration facilitated by the robust 3D open framework. However, they usually suffer from low-rate capability and inferior cycling stability due to the low intrinsic electronic conductivity and limited activated Na+ ions. Herein, a doping protocol with Na+ in the V3+ site is developed to activate extra electrochemical Na+ ions and expand the migration path of Na+, leading to the improvement of the electronic conductivity and diffusion kinetics. It is also disclosed that the generated stronger Na-O bonds with high ionicity significantly conduce to the enhanced structural stability in the Na+-substituted Na3.05V1.975Na0.025(PO4)3/C cathode. The obtained composite can deliver an excellent rate capacity of 83.8 mA h g-1 at 20 C and a moderate cycling persistence of 91.3% over 1500 cycles at 10 C with great fast-charging properties. The reversible structure evolution is confirmed by the ex situ XRD, XPS, and ICP characterization. This work sheds light on awakening electroactive Na+ ions and designing phosphates with superior electrochemical stability for practical Na-ion batteries.

An Effective Inoculation Method for Phytophthora capsici on Black Pepper Plants.

Piper nigrum L. (black pepper) is a typical woody vine that is an economically important spice crop across the world. Black pepper production is significantly impacted by root rot disease caused by Phytophthora capsici, which has seriously influenced the industry development as a "choke point" problem. However, the molecular genetic mechanism of resistance in black pepper is unclear, leading to slow progress in the development of new black pepper varieties. An effective inoculation and precise sampling system for Phytophthora capsici on black pepper plants is essential for studying this plant-pathogen interaction. The main aim of this study is to demonstrate a detailed methodology where the basal head of black pepper is inoculated with Phytophthora capsici, while also providing a reference for the inoculation of woody vine plants. The basal head of the black pepper plant was pinpricked to damage it, and mycelial pellets covered the three holes to retain the moisture so the pathogen could infect the plant well. This method provides a better way of solving the instability that is caused by traditional inoculation methods including soil drench or root dipping. It also provides a promising means for studying the mode of action between plants and other soil-borne plant pathogens in agricultural precision breeding.

Thermochemical Cyclization Constructs Bridged Dual-Coating of Ni-Rich Layered Oxide Cathodes for High-Energy Li-Ion Batteries.

Enhancing microstructural and electrochemical stabilities of Ni-rich layered oxides is critical for improving the safety and cycle-life of high-energy Li-ion batteries. Here we propose a thermochemical cyclization strategy where heating polyacrylonitrile with LiNi0.8Co0.1Mn0.1O2 can simultaneously construct a cyclized polyacrylonitrile outer layer and a rock-salt bridge-like inner layer, forming a compact dual-coating of LiNi0.8Co0.1Mn0.1O2. Systematic studies demonstrate that the mild cyclization reaction between polyacrylonitrile and LiNi0.8Co0.1Mn0.1O2 induces a desirable "layered to rock-salt" structural transformation to create a nano-intermedium that acts as the bridge for binding cyclized polyacrylonitrile to layered LiNi0.8Co0.1Mn0.1O2. Because of the improvement of the structural and electrochemical stability and electrical properties, this cathode design remarkably enhances the cycling performance and rate capability of LiNi0.8Co0.1Mn0.1O2, showing a high reversible capacity of 183 mAh g-1 and a high capacity retention of 83% after 300 cycles at 1 C rate. Notably, this facile and scalable surface engineering makes Ni-rich cathodes potentially viable for commercialization in high-energy Li-ion batteries.

Small RNA sequencing reveals various microRNAs involved in piperine biosynthesis in black pepper (Piper nigrum L.).

BACKGROUND: Black pepper (Piper nigrum L.), an important and long-cultivated spice crop, is native to South India and grown in the tropics. Piperine is the main pungent and bioactive alkaloid in the berries of black pepper, but the molecular mechanism for piperine biosynthesis has not been determined. MicroRNAs (miRNAs), which are classical endogenous noncoding small RNAs, play important roles in regulating secondary metabolism in many species, but less is known regarding black pepper or piperine biosynthesis. RESULTS: To dissect the functions of miRNAs in secondary metabolism especially in piperine biosynthesis, 110 known miRNAs, 18 novel miRNAs and 1007 individual targets were identified from different tissues of black pepper by small RNA sequencing. qRT-PCR and 5'-RLM-RACE experiments were conducted to validate the reliability of the sequencing data and predicted targets. We found 3 miRNAs along with their targets including miR166-4CL, miR396-PER and miR397-CCR modules that are involved in piperine biosynthesis. CONCLUSION: MiRNA regulation of secondary metabolism is a common phenomenon in plants. Our study revealed new miRNAs that regulate piperine biosynthesis, which are special alkaloids in the piper genus, and they might be useful for future piperine genetic improvement of black pepper.

A Universal Method for Enhancing the Structural Stability of Ni-Rich Cathodes Via the Synergistic Effect of Dual-Element Cosubstitution.

Ni-rich layered cathodes suffer detrimental structural changes due to irreversible phase transformation (IPT). Precisely surface structural reconstruction through foreign element doping is a potential method to alleviate IPT propagation. The structure of surface reconstructed layer is greatly determined by the foreign element content and species. Herein, small doses of Ti and Al were co-substituted in LiNi0.92Co0.08O2 to synergistically regulate the surface reductive Ni distribution, consequently constructing thin rock salt phase at the particle surface. This homogeneous rock salt phase combined with the strong Ti-O and Al-O bonds generated a reversible H2-H3 phase transition and further eliminated IPT propagation. Moreover, the suppressed IPT propagation converted the two-phase (H2 and H3) coexistence to a quasi-single-phase transition. This eliminated the strong internal strains caused by a significant lattice mismatch. The Ti and Al co-substituted LiNi0.92Co0.08O2 exhibited outstanding capacity retention and excellent structural stability. Similar improvements were observed with W or Zr and Al cosubstitution in Ni-rich layered cathodes. This study proposes a universal method for comprehensive improvement of structural stability based on the synergistic effect of dual-element cosubstitution in Ni-rich layered oxide cathodes, which is being explored for production of high-cycle-stability lithium-ion batteries.

Roles of Fast-Ion Conductor LiTaO3 Modifying Ni-rich Cathode Material for Li-Ion Batteries.

Limited cycling stability hampers the commercial application of Ni-rich materials, which are regarded as one of the most promising cathode materials for Li-ion batteries. Ni-rich LiNi0.9 Co0.06 Mn0.04 O2 layered cathode was modified with different amounts of LiTaO3 , and the influences of fast-ion conductor material on cathode materials were explored. Detailed analysis of the materials revealed the formation of a uniformly epitaxial LiTaO3 coating layer and a little Ta5+ doping into the lattice structure of Ni-rich materials. The coating-layer thickness increased with the amount of LiTaO3 added, protecting the electrode from erosion by electrolyte and suppressing undesired parasitic reactions on the cathode-electrolyte interface. Meanwhile, the doped Ta5+ increased the interplanar spacing of materials, accelerating Li+ transfer. Using the positive synergistic effects of LiTaO3 -coating and Ta5+ -doping, improved capacity retentions of the modified materials, especially for 0.25 and 0.5 wt%-coated Ni-rich materials, were obtained after long-term cycling, showing the potential applications of LiTaO3 modification. Further, the relations between one excessively thick coating layer and transfer of Li+ /electron between the cathode and electrolyte was established, proving that very thick coating layers, even layers containing Li ions, have adverse effects on electrochemical performances. This finding may help to understand the roles of the coating layer better.