Two Organic-Inorganic Manganese(II) Halide Hybrids Showing Compelling Photo- and Mechanoluminescence as well as Rewritable Anticounterfeiting Printing.

Two organic-inorganic manganese(II) halide hybrids (OIMHs) with formulas of [(TEA)(TMA)]MnCl4 (1) and [(TPA)(TMA)3](MnCl4)2 (2) (TEA = tetraethylammonium, TMA = tetramethylammonium, and TPA = tetrapropylammonium) were synthesized by a mixed-ligand strategy. Both compounds crystallize in the acentric space group and are composed of isolated [MnCl4]2- tetrahedral units separated by two types of organic cations. They show high thermal stability and emit strong green light with different emission bandwidths, quantum yields, and high-temperature photostability. Remarkably, the quantum yield of 1 can reach up to 99%. Due to the high thermal stability and quantum yield of 1 and 2, green light-emitting diodes (LEDs) were fabricated. Furthermore, mechanoluminescence (ML) was observed in 1 and 2 when stress was applied. The ML spectrum of 1 is similar to the photoluminescence (PL) spectrum, suggesting ML and PL emissions come from the same transition of Mn(II) ions. Finally, rewritable anticounterfeiting printing and information storage were achieved by utilizing the outstanding photophysical properties and ionic features of the products. The printed images still remain clear after several cycles, and the information stored on the paper can be read out by a UV lamp and commercial mobile phones.

Boosting CO Catalytic Oxidation Performance via Highly Dispersed Copper Atomic Clusters: Regulated Electron Interaction and Reaction Pathways.

Copper-loaded ceria (Cu/CeO2) catalysts have become promising for the catalytic oxidation of industrial CO emissions. Since their superior redox property mainly arises from the synergistic effect between Cu and the CeO2 support, the dispersion state of Cu species may dominate the catalytic performance of Cu/CeO2 catalysts: the extremely high or low dispersity is disadvantageous for the catalytic performance. The nanoparticle catalysts usually present few contact sites, while the single-atom catalysts tend to be passivated due to their relatively single valence state. To achieve a suitable dispersion state, we synthesized a superior Cu/CeO2 catalyst with Cu atomic clusters, realizing high atomic exposure and unit atomic activity simultaneously via favorable electron interaction and an anchoring effect. The catalyst reaches a 90% CO conversion at 130 °C, comparable to noble-metal catalysts. According to combined in situ spectroscopy and density functional theory calculations, the superior CO oxidation performance of the Cu atomic cluster catalyst results from the joint efforts of effective adsorption of CO at the electrophilic sites, the CO spillover phenomenon, and the efficient bicarbonate pathway triggered by hydroxyl. By providing a superior atomic cluster catalyst and uncovering the catalytic oxidation mechanism of Cu-Ce dual-active sites, our work may enlighten future research on industrial gaseous pollutant removal.

Defect Engineering on CuMn2O4 Spinel Surface: A New Path to High-Performance Oxidation Catalysts.

Catalytic combustion is an efficient method to eliminate CO and volatile organic compound (VOC) pollutants. CuMn2O4 spinel is a high-performance non-noble metal oxide catalyst for catalytic combustion and has the potential to replace noble metal catalysts. In order to further improve the catalytic activity of CuMn2O4 spinel, we propose a simple and low-cost approach to introduce numerous oxygen and metal vacancies simultaneously in situ on the CuMn2O4 spinel surface for the catalytic combustion of CO and VOCs. Alkali treatment was used to generate oxygen vacancies (VO), copper vacancies (VCu), and novel active sites (VO combines with Mn2O3 at the interface between Mn2O3(222) and CuMn2O4(311)) on the CuMn2O4 spinel surface. In the catalytic combustion of CO and VOCs, the vacancies and new active sites showed high activity and stability. The oxidation rate of CO increased by 4.13 times at 160 °C, and that of toluene increased by 11.63 times at 250 °C. Oxygen is easier to adsorb and dissociate on VO and novel sites, and the dissociated oxygen also more easily participates in the oxidation reaction. Furthermore, the lattice oxygen at VCu more readily participates in the oxidation reaction. This strategy is beneficial for the development of defect engineering on spinel surfaces and provides a new idea for improving the catalytic combustion activity of CuMn2O4 spinel.

Boosting the Catalytic Performance of CeO2 in Toluene Combustion via the Ce-Ce Homogeneous Interface.

Catalytic combustion is an advanced technology to eliminate industrial volatile organic compounds such as toluene. In order to replace the expensive noble metal catalysts and avoid the aggregation phenomenon occurring in traditional heterogeneous interfaces, designing homogeneous interfaces can become an emerging methodology to enhance the catalytic combustion performance of metal oxide catalysts. A mesocrystalline CeO2 catalyst with abundant Ce-Ce homogeneous interfaces is synthesized via a self-flaming method which exhibits boosted catalytic performance for toluene combustion compared with traditional CeO2, leading to a ∼40 °C lower T90. The abundant Ce-Ce homogeneous interfaces formed by both highly ordered stacking and small grain size endow the CeO2 mesocrystal with superior redox property and oxygen storage capacity via forming various oxygen vacancies. Surface and bulk oxygen vacancies generate and activate crucial oxygen species, while interfacial oxygen vacancies further promote the reaction behavior of oxygen species (i.e., activation, regeneration, and migration), causing the splitting of redox property toward lower temperature. These properties facilitate aromatic ring decomposition, the important rate-determining step, thus contributing to toluene catalytic degradation to CO2. This work may shed insights into the catalytic effects of homogeneous interfaces in pollutant removal and provide a strategy of interfacial defect engineering for catalyst development.

Roles of Oxygen Vacancies in the Bulk and Surface of CeO2 for Toluene Catalytic Combustion.

Catalytic combustion technology is one of the effective methods to remove VOCs such as toluene from industrial emissions. The decomposition of an aromatic ring via catalyst oxygen vacancies is usually the rate-determining step of toluene oxidation into CO2. Series of CeO2 probe models were synthesized with different ratios of surface-to-bulk oxygen vacancies. Besides the devotion of the surface vacancies, a part of the bulk vacancies promotes the redox property of CeO2 in toluene catalytic combustion: surface vacancies tend to adsorb and activate gaseous O2 to form adsorbed oxygen species, whereas bulk vacancies improve the mobility and activity of lattice oxygen species via their transmission effect. Adsorbed oxygen mainly participates in the chemical adsorption and partial oxidation of toluene (mostly to phenolate). With the elevated temperatures, lattice oxygen of the catalysts facilitates the decomposition of aromatic rings and further improves the oxidation of toluene to CO2.