Topography-Guided Control of Local Migratory Behaviors and Protein Expression of Cancer Cells.

In vivo cancer cell migration and invasion are directed by biophysical guidance mechanisms such as pre-existing microtracks and basement membrane extracellular matrices. Here, this paper reports the correlation of the local migratory behavior of cancer cells and the biochemical signal expression using the topography that can guide or inhibit cell behaviors. To this end, the local apparent migration and the protein expression level are investigated with respect to the topographical feature size (flat, nanoline, and microline) and orientation (microline, microconcentric, and microradial) with the collectively migrating (A431) and individually migrating (MDA-MB-231 and U-87-MG) cancer cells. The results show that the migration and the protein expression of focal adhesion kinase, rho-associated protein kinase, and extracellular signal-regulated kinase are localized in the periphery of cell colony. Furthermore, the inhibition of migratory behavior at the periphery recues the protein expression, while the guidance of migration enhances the aforementioned protein expression. The results may imply the employ of biophysical inhibitory factors can help to control invasiveness of cancer cells during the progression state.

3D tissue formation by stacking detachable cell sheets formed on nanofiber mesh.

We present a novel approach for assembling 3D tissue by layer-by-layer stacking of cell sheets formed on aligned nanofiber mesh. A rigid frame was used to repeatedly collect aligned electrospun PCL (polycaprolactone) nanofiber to form a mesh structure with average distance between fibers 6.4 µm. When human umbilical vein endothelial cells (HUVECs), human foreskin dermal fibroblasts, and skeletal muscle cells (C2C12) were cultured on the nanofiber mesh, they formed confluent monolayers and could be handled as continuous cell sheets with areas 3 × 3 cm2 or larger. Thicker 3D tissues have been formed by stacking multiple cell sheets collected on frames that can be nested (i.e. Matryoshka dolls) without any special tools. When cultured on the nanofiber mesh, skeletal muscle, C2C12 cells oriented along the direction of the nanofibers and differentiated into uniaxially aligned multinucleated myotube. Myotube cell sheets were stacked (upto 3 layers) in alternating or aligned directions to form thicker tissue with ∼50 µm thickness. Sandwiching HUVEC cell sheets with two dermal fibroblast cell sheets resulted in vascularized 3D tissue. HUVECs formed extensive networks and expressed CD31, a marker of endothelial cells. Cell sheets formed on nanofiber mesh have a number of advantages, including manipulation and stacking of multiple cell sheets for constructing 3D tissue and may find applications in a variety of tissue engineering applications.

Artificial Slanted Nanocilia Array as a Mechanotransducer for Controlling Cell Polarity.

We present a method to induce cell directional behavior using slanted nanocilia arrays. NIH-3T3 fibroblasts demonstrated bidirectional polarization in a rectangular arrangement on vertical nanocilia arrays and exhibited a transition from a bidirectional to a unidirectional polarization pattern when the angle of the nanocilia was decreased from 90° to 30°. The slanted nanocilia guided and facilitated spreading by allowing the cells to contact the sidewalls of the nanocilia, and the directional migration of the cells opposed the direction of the slant due to the anisotropic bending stiffness of the slanted nanocilia. Although the cells recognized the underlying anisotropic geometry when the nanocilia were coated with fibronectin, collagen type I, and Matrigel, the cells lost their directionality when the nanocilia were coated with poly-d-lysine and poly-l-lysine. Furthermore, although the cells recognized geometrical anisotropy on fibronectin coatings, pharmacological perturbation of PI3K-Rac signaling hindered the directional elongation of the cells on both the slanted and vertical nanocilia. Furthermore, myosin light chain II was required for the cells to obtain polarized morphologies. These results indicated that the slanted nanocilia array provided anisotropic contact guidance cues to the interacting cells. The polarization of cells was controlled through two steps: the recognition of underlying geometrical anisotropy and the subsequent directional spreading according to the guidance cues.

Nonlinear Frameworks for Reversible and Pluripotent Wetting on Topographic Surfaces.

Soft, ultrathin frameworks nonlinearly organized in tandem are presented to realize both reversible and pluripotent wetting on topographic surfaces. A design rule is introduced by establishing and proving the theoretical model upon hierarchical textures. Nonlinear frameworks can be conformally and reversibly wet upon complex topography in nature, thereby overcoming the wetting problems in previous conventional solid systems.

Directed migration of cancer cells guided by the graded texture of the underlying matrix.

Living cells and the extracellular matrix (ECM) can exhibit complex interactions that define key developmental, physiological and pathological processes. Here, we report a new type of directed migration-which we term 'topotaxis'-guided by the gradient of the nanoscale topographic features in the cells' ECM environment. We show that the direction of topotaxis is reflective of the effective cell stiffness, and that it depends on the balance of the ECM-triggered signalling pathways PI(3)K-Akt and ROCK-MLCK. In melanoma cancer cells, this balance can be altered by different ECM inputs, pharmacological perturbations or genetic alterations, particularly a loss of PTEN in aggressive melanoma cells. We conclude that topotaxis is a product of the material properties of cells and the surrounding ECM, and propose that the invasive capacity of many cancers may depend broadly on topotactic responses, providing a potentially attractive mechanism for controlling invasive and metastatic behaviour.

Creation of a Hybrid Scaffold with Dual Configuration of Aligned and Random Electrospun Fibers.

A novel hybrid construct was developed by combining aligned fibers (AFs) and random fibers (RFs) to form a scaffolding system. Homogeneous fiber-based structures were fabricated by electrospinning, which produced both random and aligned fiber mats depending on the collection method. The upper part of the scaffold contained an AF layer, which possessed a well-organized configuration that provided uniaxial topographic guidance. For mechanical stability and support, the lower part of the scaffold was composed of an RF layer. Despite the presence of randomly distributed RFs, desirable alignment and differentiation could be achieved in cultured C2C12 myoblasts by controlling the density of AF layer. The fibrous structure of the hybrid scaffold also exhibited high porosity and therefore reasonable permeability. Owing to the structural stability provided by the underlying RFs, the cell-laden fibrous scaffolds were amenable to physical manipulation, such as multilayering. Collectively, the morphological features and manipulable architecture of the developed scaffolds suggest that they would perform well in practical applications.

Remote Manipulation of Droplets on a Flexible Magnetically Responsive Film.

The manipulation of droplets is used in a wide range of applications, from lab-on-a-chip devices to bioinspired functional surfaces. Although a variety of droplet manipulation techniques have been proposed, active, fast and reversible manipulation of pure discrete droplets remains elusive due to the technical limitations of previous techniques. Here, we describe a novel technique that enables active, fast, precise and reversible control over the position and motion of a pure discrete droplet with only a permanent magnet by utilizing a magnetically responsive flexible film possessing actuating hierarchical pillars on the surface. This magnetically responsive surface shows reliable actuating capabilities with immediate field responses and maximum tilting angles of ~90°. Furthermore, the magnetic responsive film exhibits superhydrophobicity regardless of tilting angles of the actuating pillars. Using this magnetically responsive film, we demonstrate active and reversible manipulation of droplets with a remote magnetic force.

Multiplex lithography for multilevel multiscale architectures and its application to polymer electrolyte membrane fuel cell.

The production of multiscale architectures is of significant interest in materials science, and the integration of those structures could provide a breakthrough for various applications. Here we report a simple yet versatile strategy that allows for the LEGO-like integrations of microscale membranes by quantitatively controlling the oxygen inhibition effects of ultraviolet-curable materials, leading to multilevel multiscale architectures. The spatial control of oxygen concentration induces different curing contrasts in a resin allowing the selective imprinting and bonding at different sides of a membrane, which enables LEGO-like integration together with the multiscale pattern formation. Utilizing the method, the multilevel multiscale Nafion membranes are prepared and applied to polymer electrolyte membrane fuel cell. Our multiscale membrane fuel cell demonstrates significant enhancement of performance while ensuring mechanical robustness. The performance enhancement is caused by the combined effect of the decrease of membrane resistance and the increase of the electrochemical active surface area.

Robust microzip fastener: repeatable interlocking using polymeric rectangular parallelepiped arrays.

We report a highly repeatable and robust microzip fastener based on the van der Waals force-assisted interlocking between rectangular parallelepiped arrays. To investigate zipperlike interlocking behaviors, various line arrays were fabricated with three different spacing ratios (1, 3, and 5 of 800 nm in width) and width of parallelepipeds (400 nm, 800 nm, and 5 µm with the spacing ratio of 1). In addition, the different rigidity of line arrays was inspected for a repeatable microzip fastener. The normal and shear locking forces were measured with variation of the material rigidity as well as geometry of the array, in good agreement with a proposed theory based on the contact area and force balance. The maximum adhesion forces as high as ∼8.5 N cm(-2) in the normal direction and ∼29.6 N cm(-2) in the shear direction were obtained with high stability up to 1000 cycles. High stability of our fastening system was confirmed for preventing critical failures such as buckling and fracture in practical applications.

Microfluidic platforms with monolithically integrated hierarchical apertures for the facile and rapid formation of cargo-carrying vesicles.

We fabricated a simple yet robust microfluidic platform with monolithically integrated hierarchical apertures. This platform showed efficient diffusive mixing of the introduced lipids through approximately 8000 divisions with tiny pores (~5 µm in diameter), resulting in massive, real-time production of various cargo-carrying particles via multi-hydrodynamic focusing.

Ultrasensitive mechanical crack-based sensor inspired by the spider sensory system.

Recently developed flexible mechanosensors based on inorganic silicon, organic semiconductors, carbon nanotubes, graphene platelets, pressure-sensitive rubber and self-powered devices are highly sensitive and can be applied to human skin. However, the development of a multifunctional sensor satisfying the requirements of ultrahigh mechanosensitivity, flexibility and durability remains a challenge. In nature, spiders sense extremely small variations in mechanical stress using crack-shaped slit organs near their leg joints. Here we demonstrate that sensors based on nanoscale crack junctions and inspired by the geometry of a spider's slit organ can attain ultrahigh sensitivity and serve multiple purposes. The sensors are sensitive to strain (with a gauge factor of over 2,000 in the 0-2 per cent strain range) and vibration (with the ability to detect amplitudes of approximately 10 nanometres). The device is reversible, reproducible, durable and mechanically flexible, and can thus be easily mounted on human skin as an electronic multipixel array. The ultrahigh mechanosensitivity is attributed to the disconnection-reconnection process undergone by the zip-like nanoscale crack junctions under strain or vibration. The proposed theoretical model is consistent with experimental data that we report here. We also demonstrate that sensors based on nanoscale crack junctions are applicable to highly selective speech pattern recognition and the detection of physiological signals. The nanoscale crack junction-based sensory system could be useful in diverse applications requiring ultrahigh displacement sensitivity.

Repetitive cleavage of elastomeric membrane via controlled interfacial fracture.

Here, we report a method of fabricating thin layer of polydimethylsiloxane (PDMS), with a thickness in the range of 60-80 nm, which can be repeatedly generated (more than 10 times) from the same block of PDMS via controlled interfacial fracture. The thin layers can be transferred to various substrates by peeling off from the bulk PDMS. The cleavage is attributed to the built-in stress at the fracture interface due to plasma treatment, resulting in the repetitive formation of the thin membranes, with no residue from processing, and with a surface roughness of ∼5 nm. We were able to demonstrate transferred patterns with controlled thickness by varying the oxygen plasma treatment conditions and the composition of bulk PDMS stamp. Using the method, we achieved residual-free patterns with submicrometer resolution for applications in biomolecule array templates.

Janus-compartmental alginate microbeads having polydiacetylene liposomes and magnetic nanoparticles for visual lead(II) detection.

Janus-compartmental alginate microbeads having two divided phases of sensory polydiacetylene (PDA) liposomes and magnetic nanoparticles were fabricated for facile sensory applications. The sensory liposomes are composed of PDA for label-free signal generation and 1,2-dipalmitoyl-sn-glycero-3-galloyl (DPGG) lipids whose galloyl headgroup has specific interactions with lead(II). The second phase having magnetic nanoparticles is designed for convenient handling of the microbeads, such as washing, solvent exchange, stirring, and detection, by applying magnetic field. Selective and convenient colorimetric detection of lead(II) and efficient removal of lead(II) by alginate matrix at the same time are demonstrated.

Hierarchical multilayer assembly of an ordered nanofibrous scaffold via thermal fusion bonding.

A major challenge in muscle tissue engineering is mimicking the ordered nanostructure of native collagen fibrils in muscles. Electrospun nanofiber constructs have been proposed as promising candidate alternatives to natural extracellular matrix. Here, we introduce a novel method to fabricate a two-dimension (2D) sheet-type and three-dimensionally integrated nanofibrous scaffolds by combining electrospinning and rapid prototyping. The aligned 2D nanofiber mats can be processed into different configurations by the CAD/CAM-based deposition of thermally extruded microstructures. We demonstrate the feasibility of these microstructures for application in muscle tissue engineering by culturing C2C12 myoblasts and then evaluating their viability and alignment. Highly aligned cellular morphologies were successfully achieved along the direction of the nanofibers in all types of scaffolds. The hybrid scaffolds provided mechanical support and served as a topographical guide at the nanoscale, exhibiting their potential to meet the requirements for practical use in tissue engineering applications.

T cells sense biophysical cues using lamellipodia and filopodia to optimize intraluminal path finding.

Intraluminal crawling is considered to be important for extravasation of leukocytes in blood vessels, but biochemical/biophysical cues guiding the crawling of leukocytes have not been clearly understood. Here we provide evidence that T cells sense the topography of luminal surfaces and the nuclei of endothelial cells (ECs) using lamellipodia and filopodia, respectively, to optimize path finding during intraluminal crawling. Well-aligned EC layers or replicas of EC layers, which exhibit topography similar to that of EC layers, were fabricated, and flow was applied either parallel or perpendicular to the orientation of EC alignment. T cells crawled along the valleys of the topographical landscapes of the EC layers, while avoiding nuclei of ECs regardless of flow direction. Pharmacological inhibitor treatments revealed that sensing of topography and nuclei of EC layers was mediated by lamellipodia and filopodia, respectively. Lamellipodia or filopodia-inhibited T cells crawled significantly longer distances for extravasation than did normal T cells, indicating that sensing biophysical cues are critical for optimizing routes for extravasation.

Replication of flexible polymer membranes with geometry-controllable nano-apertures via a hierarchical mould-based dewetting.

Membranes with nano-apertures are versatile templates that possess a wide range of electronic, optical and biomedical applications. However, such membranes have been limited to silicon-based inorganic materials to utilize standard semiconductor processes. Here we report a new type of flexible and free-standing polymeric membrane with nano-apertures by exploiting high-wettability difference and geometrical reinforcement via multiscale, multilevel architecture. In the method, polymeric membranes with various pore sizes (50-800 nm) and shapes (dots, lines) are fabricated by a hierarchical mould-based dewetting of ultraviolet-curable resins. In particular, the nano-pores are monolithically integrated on a two-level hierarchical supporting layer, allowing for the rapid (<5 min) and robust formation of multiscale and multilevel nano-apertures over large areas (2 × 2 cm(2)).

Spatial control of adult stem cell fate using nanotopographic cues.

Adult stem cells hold great promise as a source of diverse terminally differentiated cell types for tissue engineering applications. However, due to the complexity of chemical and mechanical cues specifying differentiation outcomes, development of arbitrarily complex geometric and structural arrangements of cells, adopting multiple fates from the same initial stem cell population, has been difficult. Here, we show that the topography of the cell adhesion substratum can be an instructive cue to adult stem cells and topographical variations can strongly bias the differentiation outcome of the cells towards adipocyte or osteocyte fates. Switches in cell fate decision from adipogenic to osteogenic lineages were accompanied by changes in cytoskeletal stiffness, spanning a considerable range in the cell softness/rigidity spectrum. Our findings suggest that human mesenchymal stem cells (hMSC) can respond to the varying density of nanotopographical cues by regulating their internal cytoskeletal network and use these mechanical changes to guide them toward making cell fate decisions. We used this finding to design a complex two-dimensional pattern of co-localized cells preferentially adopting two alternative fates, thus paving the road for designing and building more complex tissue constructs with diverse biomedical applications.

25th anniversary article: scalable multiscale patterned structures inspired by nature: the role of hierarchy.

Multiscale, hierarchically patterned surfaces, such as lotus leaves, butterfly wings, adhesion pads of gecko lizards are abundantly found in nature, where microstructures are usually used to strengthen the mechanical stability while nanostructures offer the main functionality, i.e., wettability, structural color, or dry adhesion. To emulate such hierarchical structures in nature, multiscale, multilevel patterning has been extensively utilized for the last few decades towards various applications ranging from wetting control, structural colors, to tissue scaffolds. In this review, we highlight recent advances in scalable multiscale patterning to bring about improved functions that can even surpass those found in nature, with particular focus on the analogy between natural and synthetic architectures in terms of the role of different length scales. This review is organized into four sections. First, the role and importance of multiscale, hierarchical structures is described with four representative examples. Second, recent achievements in multiscale patterning are introduced with their strengths and weaknesses. Third, four application areas of wetting control, dry adhesives, selectively filtrating membranes, and multiscale tissue scaffolds are overviewed by stressing out how and why multiscale structures need to be incorporated to carry out their performances. Finally, we present future directions and challenges for scalable, multiscale patterned surfaces.

Nanopatterned muscle cell patches for enhanced myogenesis and dystrophin expression in a mouse model of muscular dystrophy.

Skeletal muscle is a highly organized tissue in which the extracellular matrix (ECM) is composed of highly-aligned cables of collagen with nanoscale feature sizes, and provides structural and functional support to muscle fibers. As such, the transplantation of disorganized tissues or the direct injection of cells into muscles for regenerative therapy often results in suboptimal functional improvement due to a failure to integrate with native tissue properly. Here, we present a simple method in which biodegradable, biomimetic substrates with precisely controlled nanotopography were fabricated using solvent-assisted capillary force lithography (CFL) and were able to induce the proper development and differentiation of primary mononucleated cells to form mature muscle patches. Cells cultured on these nanopatterned substrates were highly-aligned and elongated, and formed more mature myotubes as evidenced by up-regulated expression of the myogenic regulatory factors Myf5, MyoD and myogenin (MyoG). When transplanted into mdx mice models for Duchenne muscular dystrophy (DMD), the proposed muscle patches led to the formation of a significantly greater number of dystrophin-positive muscle fibers, indicating that dystrophin replacement and myogenesis is achievable in vivo with this approach. These results demonstrate the feasibility of utilizing biomimetic substrates not only as platforms for studying the influences of the ECM on skeletal muscle function and maturation, but also to create transplantable muscle cell patches for the treatment of chronic and acute muscle diseases or injuries.

Multiscale transfer printing into recessed microwells and on curved surfaces via hierarchical perfluoropolyether stamps.

A simple method for the formation of multiscale metal patterns is presented using hierarchical polymeric stamps with perfluoropolyether (PFPE). A dual-scale PFPE structure is made via two-step moulding process under partial photocrosslinking conditions. The hierarchical PFPE stamp enables multiscale transfer printing (MTP) of metal pattern in one step within microwells as well as on curved surfaces.