An overview of approaches and challenges for retrieving marine inherent optical properties from ocean color remote sensing.

Ocean color measured from satellites provides daily global, synoptic views of spectral waterleaving reflectances that can be used to generate estimates of marine inherent optical properties (IOPs). These reflectances, namely the ratio of spectral upwelled radiances to spectral downwelled irradiances, describe the light exiting a water mass that defines its color. IOPs are the spectral absorption and scattering characteristics of ocean water and its dissolved and particulate constituents. Because of their dependence on the concentration and composition of marine constituents, IOPs can be used to describe the contents of the upper ocean mixed layer. This information is critical to further our scientific understanding of biogeochemical oceanic processes, such as organic carbon production and export, phytoplankton dynamics, and responses to climatic disturbances. Given their importance, the international ocean color community has invested significant effort in improving the quality of satellite-derived IOP products, both regionally and globally. Recognizing the current influx of data products into the community and the need to improve current algorithms in anticipation of new satellite instruments (e.g., the global, hyperspectral spectroradiometer of the NASA Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission), we present a synopsis of the current state of the art in the retrieval of these core optical properties. Contemporary approaches for obtaining IOPs from satellite ocean color are reviewed and, for clarity, separated based their inversion methodology or the type of IOPs sought. Summaries of known uncertainties associated with each approach are provided, as well as common performance metrics used to evaluate them. We discuss current knowledge gaps and make recommendations for future investment for upcoming missions whose instrument characteristics diverge sufficiently from heritage and existing sensors to warrant reassessing current approaches.

Evidence for ubiquitous preferential particle orientation in representative oceanic shear flows.

In situ measurements were undertaken to characterize particle fields in undisturbed oceanic environments. Simultaneous, co-located depth profiles of particle fields and flow characteristics were recorded using a submersible holographic imaging system and an acoustic Doppler velocimeter, under different flow conditions and varying particle concentration loads, typical of those found in coastal oceans and lakes. Nearly one million particles with major axis lengths ranging from ∼14 µm to 11.6 mm, representing diverse shapes, sizes, and aspect ratios were characterized as part of this study. The particle field consisted of marine snow, detrital matter, and phytoplankton, including colonial diatoms, which sometimes formed "thin layers" of high particle abundance. Clear evidence of preferential alignment of particles was seen at all sampling stations, where the orientation probability density function (PDF) peaked at near horizontal angles and coincided with regions of low velocity shear and weak turbulent dissipation rates. Furthermore, PDF values increased with increasing particle aspect ratios, in excellent agreement with models of spheroidal particle motion in simple shear flows. To the best of our knowledge, although preferential particle orientation in the ocean has been reported in two prior cases, our findings represent the first comprehensive field study examining this phenomenon. Evidence of nonrandom particle alignment in aquatic systems has significant consequences to aquatic optics theory and remote sensing, where perfectly random particle orientation and thus isotropic symmetry in optical parameters is assumed. Ecologically, chain-forming phytoplankton may have evolved to form large aspect ratio chains as a strategy to optimize light harvesting.

Assessing uncertainties in scattering correction algorithms for reflective tube absorption measurements made with a WET Labs ac-9.

In situ absorption measurements collected with a WET Labs ac-9 employing a reflective tube approach were scatter corrected using several possible methods and compared to reference measurements made by a PSICAM to assess performance. Overall, two correction methods performed best for the stations sampled: one using an empirical relationship between the ac-9 and PSICAM to derive the scattering error (ε) in the near-infrared (NIR), and one where ε was independently derived from concurrent measurements of the volume scattering function (VSF). Application of the VSF-based method may be more universally applicable, although difficult to routinely apply because of the lack of commercially available VSF instrumentation. The performance of the empirical approach is encouraging as it relies only on the ac meter measurement and may be readily applied to historical data, although there are inevitably some inherent assumptions about particle composition that hinder universal applicability. For even the best performing methods, residual errors of 20% or more were commonly observed for many water types. For clear ocean waters, a conventional baseline subtraction with the assumption of negligible near-IR absorption performed as well or better than the above methods because propagated uncertainties were lower than observed with the proportional method.

Polarimetric imaging and retrieval of target polarization characteristics in underwater environment.

Polarized light fields contain more information than simple irradiance and such capabilities provide an advanced tool for underwater imaging. The concept of the beam spread function (BSF) for analysis of scalar underwater imaging was extended to a polarized BSF which considers polarization. The following studies of the polarized BSF in an underwater environment through Monte Carlo simulations and experiments led to a simplified underwater polarimetric imaging model. With the knowledge acquired in the analysis of the polarimetric imaging formation process of a manmade underwater target with known polarization properties, a method to extract the inherent optical properties of the water and to retrieve polarization characteristics of the target was explored. The proposed method for retrieval of underwater target polarization characteristics should contribute to future efforts to reveal the underlying mechanism of polarization camouflage possessed by marine animals and finally to generalize guidelines for creating engineered surfaces capable of similar polarization camouflage abilities in an underwater environment.

Open-ocean fish reveal an omnidirectional solution to camouflage in polarized environments.

Despite appearing featureless to our eyes, the open ocean is a highly variable environment for polarization-sensitive viewers. Dynamic visual backgrounds coupled with predator encounters from all possible directions make this habitat one of the most challenging for camouflage. We tested open-ocean crypsis in nature by collecting more than 1500 videopolarimetry measurements from live fish from distinct habitats under a variety of viewing conditions. Open-ocean fish species exhibited camouflage that was superior to that of both nearshore fish and mirrorlike surfaces, with significantly higher crypsis at angles associated with predator detection and pursuit. Histological measurements revealed that specific arrangements of reflective guanine platelets in the fish's skin produce angle-dependent polarization modifications for polarocrypsis in the open ocean, suggesting a mechanism for natural selection to shape reflectance properties in this complex environment.

Lidar extinction-to-backscatter ratio of the ocean.

Bio-optical models are used to develop a model of the lidar extinction-to-backscatter ratio applicable to oceanographic lidar. The model is based on chlorophyll concentration, and is expected to be valid for Case 1 waters. The limiting cases of narrow- and wide-beam lidars are presented and compared with estimates based on in situ optical measurements. Lidar measurements are also compared with the model using in situ or satellite estimates of chlorophyll concentration. A modified lidar ratio is defined, in which the properties of pure sea water are removed. This modified ratio is shown to be nearly constant for wide-beam lidar operating in low-chlorophyll waters, so accurate inversion to derive extinction and backscattering is possible under these conditions. This ratio can also be used for lidar calibration.

Oceanographic lidar profiles compared with estimates from in situ optical measurements.

Oceanographic lidar profiles measured in an aerial survey were compared with in situ measurements of water optical properties made from a surface vessel. Experimental data were collected over a two-week period in May 2010 in East Sound, Washington. Measured absorption and backscatter coefficients were used with the volume-scattering function in a quasi-single-scattering model to simulate an idealized lidar return, and this was convolved with the measured instrument response to accurately reproduce the measured temporal behavior. Linear depth-dependent depolarization from the water column and localized depolarization from scattering layers are varied to fine tune the simulated lidar return. Sixty in situ measurements of optical properties were correlated with nearly collocated and coincident lidar profiles; our model yielded good matches (±3 dB to a depth of 12 m) between simulated and measured lidar profiles for both uniform and stratified waters. Measured attenuation was slightly higher (5%) than diffuse attenuation for the copolarized channel and slightly lower (8%) for the cross-polarized channel.

Benthic effects on the polarization of light in shallow waters.

Measurements of the upwelling polarized radiance in relatively shallow waters of varying depths and benthic conditions are compared to simulations, revealing the depolarizing nature of the seafloor. The simulations, executed with the software package RayXP, are solutions to the vector radiative transfer equation, which depends on the incident light field and three types of parameters: inherent optical properties, the scattering matrix, and the benthic reflectance. These were measured directly or calculated from measurements with additional assumptions. Specifically, the Lambertian model used to simulate benthic reflectances is something of a simplification of reality, but the bottoms used in this study are found to be crucial for accurate simulations of polarization. Comparisons of simulations with and without bottom contributions show that only the former corroborate measurements of the Stokes components and the degree of linear polarization (DoLP) collected by the polarimeter developed at the City College of New York. Because this polarimeter is multiangular and hyperspectral, errors can be computed point-wise over a large range of scattering angles and wavelengths. Trends also become apparent. DoLP is highly sensitive to the benthic reflectance and to the incident wavelength, peaking in the red band, but the angle of linear polarization is almost spectrally constant and independent of the bottom. These results can thus facilitate the detection of benthic materials as well as future studies of camouflage by benthic biota; to hide underwater successfully, animals must reflect light just as depolarized as that reflected by benthic materials.

Measurements and simulations of polarization states of underwater light in clear oceanic waters.

Polarization states of the underwater light field were measured by a hyperspectral and multiangular polarimeter and a video polarimeter under various atmospheric, surface, and water conditions, as well as solar and viewing geometries, in clear oceanic waters near Port Aransas, Texas. Some of the first comprehensive comparisons were made between the measured polarized light, including the degree and angle of linear polarization and linear Stokes parameters (Q and U), and those from Monte Carlo simulations that used concurrently measured water inherent optical properties and particle volume scattering functions as input. For selected wavelengths in the visible spectrum, measured and model-simulated polarization characteristics were found to be consistent in most cases. Measured degree and angle of linear polarization are found to be largely determined by an in-water single-scattering model. Model simulations suggest that the degree of linear polarization (DoLP) at horizontal viewing directions is highly dependent on the viewing azimuth angle for a low solar elevation. This implies that animals can use the DoLP signal for orientation.

Angular shape of the oceanic particulate volume scattering function in the backward direction.

Analysis of several million particulate volume scattering functions (VSFs) from different field sites around the world's oceans and coastlines revealed that the shape of the VSF in the backward direction was remarkably consistent (5% or less variability at angles between 90 degrees and 170 degrees ). In agreement with theoretical models and past field measurements, the variability of the VSF shape (the VSF normalized to the backscattering coefficient) was found to be lowest between 110 degrees and 120 degrees . This study concludes that under most oceanic conditions, estimates of the particulate backscattering coefficient, using single angle scattering measurements near 110 degrees to 120 degrees and suitable conversion factors, are justified and should have a maximum uncertainty of less than a few percent once instrument noise is accounted for.

Scattering by solutions of major sea salts.

Increased scattering by seawater relative to that by pure water is primarily due to additional fluctuation of the refractive index contributed by sea salts. Salts with different ionic weight and sizes, while barely affecting the scattering that is due to density fluctuations, have a significant effect on the scattering that is due to concentration fluctuations. And this explains the major differences of their total scattering that would be observed. Scattering by solutions of NaCl, the major sea salt, is consistently about 6.7% and 4% lower than seawater of the same mass concentration and of the same refractive index, respectively. Because of ionic interactions, the molecular scattering does not follow the simple addition rule that applies to bulk inherent optical properties, with the total less than the summation of the parts. The possible values of scattering by waters of, such as, Dead Sea or Orca Basin, which have different salt composition from seawater, are discussed.

Survivors' perspectives on the impact of clergy sexual abuse on families of origin.

Clergy-perpetrated sexual abuse rose to public attention in 2002 through the disclosure of abuse by Catholic priests within the Archdiocese of Boston and a simultaneous cover-up by church hierarchy. Similar patterns have since been described in other Catholic dioceses and in other faith denominations. While recent studies have examined the impact of such abuse on adult survivors, little is known about the impact on their families of origin. Using the Trauma Transmission and Empowerment models and the Family Adjustment and Adaptation Response model, this paper examines the impact of such abuse on families from male survivors' perspectives. A five-phased approach to reconciliation within families and dialogue with the church community is discussed to highlight communication as a core theme to healing.

Hyperspectral temperature and salt dependencies of absorption by water and heavy water in the 400-750 nm spectral range.

The temperature and salt dependencies of absorption by liquid water (H2O) and heavy water (D2O) were determined using a hyperspectral absorption and attenuation meter (WET Labs, AC-S). Sodium chloride (NaCl) was used as a proxy for seawater salts. There was no significant temperature (PsiT) or salt (PsiS) dependency of absorption at wavelengths <550 nm. At wavelengths >550 nm, PsiT exhibited peaks at approximately 604, 662, and 740 nm. A small negative trough in PsiS occurred at approximately 590 nm, followed by a small positive peak approximately 620 nm, a larger negative trough at approximately 720 nm, and a strong positive peak at approximately 755 nm. The salt dependency of absorption by heavy water, Psis(H), exhibited a negative power-law shape with very low Psis(H), at wavelengths >550 nm. Our experiments with NaCl, clean open ocean seawater, and artificial seawater support the hypothesis that salts modify the absorption spectra of seawater by modifying the molecular matrix and vibrations of pure water.

Use of optical scattering to discriminate particle types in coastal waters.

The particulate scattering characteristics of coastal waters were examined at nine locations around the United States, including near-shore sites in the Gulf of Mexico and the Atlantic and Pacific oceans. The scattering measurements were used in conjunction with inversion models to estimate particle size distributions and bulk refractive indices of the suspended particles. The relationships between various scattering properties and chlorophyll concentration were also investigated and compared with previous relationships described for case I waters. Although the general patterns of scattering and particle characteristics in coastal waters were fairly consistent, fine-scale variability within the water column was substantial. Combining optical measurements with inversion techniques provided a more informative view of the environment and a better understanding of the nature of particle populations in the coastal ocean.

Electrical spin injection from an n-type ferromagnetic semiconductor into a III-V device heterostructure.

The use of carrier spin in semiconductors is a promising route towards new device functionality and performance. Ferromagnetic semiconductors (FMSs) are promising materials in this effort. An n-type FMS that can be epitaxially grown on a common device substrate is especially attractive. Here, we report electrical injection of spin-polarized electrons from an n-type FMS, CdCr(2)Se(4), into an AlGaAs/GaAs-based light-emitting diode structure. An analysis of the electroluminescence polarization based on quantum selection rules provides a direct measure of the sign and magnitude of the injected electron spin polarization. The sign reflects minority rather than majority spin injection, consistent with our density-functional-theory calculations of the CdCr(2)Se(4) conduction-band edge. This approach confirms the exchange-split band structure and spin-polarized carrier population of an FMS, and demonstrates a litmus test for these FMS hallmarks that discriminates against spurious contributions from magnetic precipitates.