Integrated transcriptome and microbiome analyses of residual feed intake in ducks during high production period.

Residual feed intake (RFI) is a crucial parameter for assessing the feeding efficiency of poultry. Minimizing RFI can enhance feed utilization and reduce costs. In this study, 315 healthy female ducks were individually housed in cages. Growth performance was monitored during the high laying period, from 290 to 325 d of age. The cecal transcriptome and microbiome of 12 ducks with high RFI and 12 with low residual feed intake (LRFI) were analyzed. Regarding growth performance, the LRFI group exhibited significantly lower RFI, feed conversion ratio (FCR), and feed intake (Fi) compared to the HRFI group (p < 0.01). However, there were no significant differences observed in body weight (BW), body weight gain (BWG), and egg mass (EML) between the groups (p > 0.05). Microbiome analysis demonstrated that RFI impacted gut microbial abundance, particularly affecting metabolism and disease-related microorganisms such as Romboutsia, Enterococcus, and Megamonas funiformis. Transcriptome analysis revealed that varying RFI changed the expression of genes related to glucose metabolism and lipid metabolism, including APOA1, G6PC1, PCK1, and PLIN1. The integrated analysis indicated that host genes were closely linked to the microbiota and primarily function in lipid metabolism, which may enhance feeding efficiency by influencing metabolism and maintaining gut homeostasis.

Janus membranes derived from multi-shelled hollow spheres coated electrospun PVA membranes as phase change composites for photothermal conversion.

The development and preparation of multifunctional photothermal conversion materials has far-reaching significance for the utilization of solar energy resources in response to the energy crisis. Herein, we propose a Janus membrane for interfacial solar evaporation and phase change energy storage. The membranes were fabricated via combining the PVA film with multi-shelled hollow spheres (MHS). The membranes have asymmetric wettability, that is, one side is hydrophilic and the other side is hydrophobic. The as-resulted membranes obtain outstanding light absorption without further processing. According to these two advantages, the membranes were applied to solar evaporation. The evaporation rate of the membrane is 1.41 kg*m-2h-1 and the evaporation efficiency is 92.4 % under 1sun irradiation. Moreover, the membrane prepared by impregnating 1-Hexadecanamine (HDA) into MHS possesses excellent tensile strength (2.21 MPa) and photothermal conversion ability. The light-to-thermal conversion efficiency can reach 81.9 % under 1sun irradiation. Therefore, the membranes have broad application prospects in the field of photothermal conversion.

Recent advances and perspectives in solar photothermal conversion and storage systems: A review.

Developing high-efficiency solar photothermal conversion and storage (SPCS) technology is significant in solving the imbalance between the supply and demand of solar energy utilization in time and space. Aiming at the current research status in the field of SPCS, this review thoroughly examines the phase change materials and substrates in SPCS systems. It elucidates the design principles and methods of SPCS integrated composites. Comparatively, it analyzes the parameters of various types of SPCS composites in terms of photothermal conversion, thermal conductivity, energy density, and cycling stability. Additionally, the review discusses the trade-offs between each parameter to achieve the most optimal effect of SPCS. By sorting out the current status of the application of SPCS technology in solar thermal/photovoltaic, aerospace, buildings, textile, and other industries, this analysis clarifies the requirements for various latent heat, phase change temperature, and other properties under different environmental conditions. Through a comprehensive discussion of SPCS technology, this paper accurately captures the development trend of efficiently and comprehensively utilizing solar energy by analyzing existing scientific problems. It identifies bottlenecks in SPCS technology and suggests future development directions that need focused attention. The insights gained from this analysis may provide a theoretical basis for designing strategies, enhancing performance, and promoting the application of SPCS.

Analysis of Transcriptomic Differences in the Ovaries of High- and Low-Laying Ducks.

The egg-laying performance of Shan Ma ducks (Anas Platyrhynchos) is a crucial economic trait. Nevertheless, limited research has been conducted on the egg-laying performance of this species. We examined routine blood indicators and observed higher levels of metabolic and immune-related factors in the high-egg-production group compared with the low-egg-production group. Furthermore, we explored the ovarian transcriptome of both high- and low-egg-production groups of Shan Ma ducks using Illumina NovaSeq 6000 sequencing. A total of 1357 differentially expressed genes (DEGs) were identified, with 686 down-regulated and 671 up-regulated in the high-egg-production (HEP) ducks and low-egg-production (LEP) ducks. Several genes involved in the regulation of ovarian development, including neuropeptide Y (NPY), cell cycle protein-dependent kinase 1 (CDK1), and transcription factor 1 (E2F1), exhibited significant differential expressions at varying stages of egg production. Pathway functional analysis revealed that the DEGs were primarily associated with the steroid biosynthesis pathway, and the neuroactive ligand-receptor interaction pathway exhibited higher activity in the HEP group compared to the LEP group. This study offers valuable information about and novel insights into high egg production.

Comparative analysis of the hypothalamus transcriptome of laying ducks with different residual feeding intake.

Feed costs account for approximately 60 to 70% of the cost of poultry farming, and feed utilization is closely related to the profitability of the poultry industry. To understand the causes of the differences in feeding in Shan Partridge ducks, we compared the hypothalamus transcriptome profiles of 2 groups of ducks using RNA-seq. The 2 groups were: 1) low-residual feed intake (LRFI) group with low feed intake but high feed efficiency, and 2) high-residual feed intake (HRFI) group with high feed intake but low feed efficiency. We found 78 DEGs were enriched in 9 differential Kyoto Encyclopedia of Genes and Genome (KEGG) pathways, including neuroactive ligand-receptor interaction, GABAergic synapse, nitrogen metabolism, cAMP signaling pathway, calcium signaling pathway, nitrogen metabolism, tyrosine metabolism, ovarian steroidogenesis, and gluconeogenesis. To further identify core genes among the 78 DEGs, we performed protein-protein interaction and coexpression network analyses. After comprehensive analysis and experimental validation, 4 core genes, namely, glucagon (GCG), cholecystokinin (CCK), gamma-aminobutyric acid type A receptor subunit delta (GABRD), and gamma-aminobutyric acid type A receptor subunit beta1 (GABRB1), were identified as potential core genes responsible for the difference in residual feeding intake between the 2 breeds. We also investigated the level of cholecystokinin (CCK), neuropeptide Y (NPY), peptide YY (PYY), ghrelin, and glucagon-like peptide1 (GLP-1) hormones in the sera of Shan Partridge ducks at different feeding levels and found that there was a difference between the 2 groups with respect to GLP-1 and NPY levels. The findings will serve as a reference for future research on the feeding efficiency of Shan Partridge ducks and assist in promoting their genetic breeding.

Vertical porous aerogel based on polypyrrole and bimetallic modified ß-cyclodextrin polymer-chitosan for efficient solar evaporation.

Solar-driven interfacial evaporation (SDIE) stands out as a prospective technology for freshwater production, playing a significant role in mitigating global water scarcity. Herein, a cyclodextrin polymer/chitosan composite aerogel (PPy-La/Al@CDP-CS) with vertically aligned channels was prepared as a solar evaporator for efficient solar steam generation. The vertically aligned pore structure, achieved through directional freezing assisted by liquid nitrogen, not only improves water transport during evaporation but also enhances light absorption through multiple reflections of sunlight within the pores. The polypyrrole particles sprayed on the surface of the aerogel acted as a light-absorbing layer, resulting in an impressive absorbance of 98.15 % under wetting conditions. The aerogel has an evaporation rate of 1.85 kg m-2 h-1 under 1 kW m-2 irradiation. Notably, the vertical pore structure of the aerogel allows it to exhibit excellent evaporation performance and salt resistance even in highly concentrated salt solutions. Furthermore, this aerogel is an excellent solar-driven interfacial evaporator for purifying seawater and fluoride-containing wastewater. This photothermal aerogel has the advantages of excellent performance, low cost, and environmental friendliness, and thus this work provides a new approach to the design and fabrication of solar photothermal materials for water treatment.

Multishell Copper Oxide Hollow Spheres Incorporated with Fatty Amines for High Light-To-Thermal Conversion.

Composite phase change materials (PCMs) are of great importance for the storage and conversion of energy. In this study, a multishell metal oxide hollow microsphere (CuOHS) was prepared by the hydrothermal method, and a new composite PCM (CuOHS@PCMs) for energy storage and conversion purposes was developed by effectively absorbing fatty amines [namely, tetradecylamine (TDA), hexadecylamine (HDA), and octadecylamine (ODA)] PCMs into the CuOHS via the abundant micropores located on the surface of the microsphere. The incorporation of uncontaminated phase alteration substances with CuOHS yields superior light absorption and leak prevention traits. The three CuOHS@PCMs, specifically CuOHS@TDA, CuOHS@HDA, and CuOHS@ODA, possess considerable latent heats of 198.8, 192.6, and 196.0 J·g-1, respectively, and exhibit desirable thermal properties even after completing 50 and 100 thermal cycles. Moreover, under illumination, the photothermal conversion efficiencies of the three variations of CuOHS@PCMs were 84.0, 81.4, and 78.0%. This CuOHS@PCMs, which are based on CuOHS, have considerable potential in the fields of photothermal conversion, solar energy harvesting, and storage.

Projections from anteromedial thalamus nucleus to the midcingulate cortex mediate pain and anxiety-like behaviors in mice.

Prior research has demonstrated the involvement of the midcingulate cortex (MCC) and its downstream pathway in pain regulation. However, the mechanism via which pain information is conveyed to the MCC remains unclear. The present study utilized immunohistochemistry, chemogenetics, optogenetics, and behavior detection methods to explore the involvement of MCC, anteromedial thalamus nucleus (AM), and AM-MCC pathway in pain and emotional regulation. Chemogenetics or optogenetics methods were employed to activate/inhibit MCCCaMKIIα, AMCaMKIIα, AMCaMKIIα-MCC pathway. This manipulation evokes/relieves mechanical and partial heat hyperalgesia, as well as anxiety-like behaviors. In the complete Freund,s adjuvant (CFA) inflammatory pain model, chemogenetic inhibition of the AMCaMKIIα-MCCCaMKIIα pathway contributed to pain relief. Notably, this study presented the first evidence implicating the AM in the regulation of nociception and negative emotions. Additionally, it was observed that the MCC primarily receives projections from the AM, highlighting the crucial role of this pathway in the transmission of pain and emotional information.

Guar Gum-Based Macroporous Hygroscopic Polymer for Efficient Atmospheric Water Harvesting.

Solar-driven atmospheric water harvesting technology has the advantage of not being limited by geography and has great potential in solving the freshwater crisis. Here, we first propose a purely natural and degradable superhydrophilic composite macroporous hygroscopic material by applying guar gum (GG) to atmospheric water harvesting. The material consists of GG-cellulose nanofibers (CNFs) as a porous substrate material, limiting the hygroscopic factor lithium chloride (LiCl) in its three-dimensional (3D) network structure, and carbon nanotubes (CNTs) play a photothermal conversion role. The composite material has a high light absorption rate of more than 95%, and the macroporous structure (20-60 µm) allows for rapid adsorption/desorption kinetics. At 35 °C and 90% relative humidity (RH), the moisture absorption capacity is as high as 1.94 g/g. Under 100 mW/cm2 irradiation, the absorbed water is almost completely desorbed within 3 h, and the water harvesting performance is stable in 10 cycles. Moreover, liquid water was successfully collected in an actual outdoor experiment. This work demonstrates the great potential of biomass materials in the field of atmospheric water collection and provides more opportunities for various energy and sustainable applications in the future.

3D Tea-Residue Microcrystalline Cellulose Aerogel with Aligned Channels for Solar-Driven Interfacial Evaporation Co-generation.

Solar-driven interfacial evaporation co-generation (SIE-CG) technology is of great significance in solving the problem of water and energy shortage. Herein, we report the ionic liquid-assisted alignment of waste biomass tea residue-based microcrystalline cellulose for aerogels (abbreviated as TPPA-5) with aligned channels for solar-driven interfacial evaporation co-generation. In the ionic liquid, strong H-bonding is formed between the pyranoid rings of cellulose combined with the slow freezing technique, resulting in the microcrystalline cellulose being reoriented, which allowed TPPA-5 to form abundant aligned channels after solvent replacement and freeze-drying. These aligned channels enable the brine to form a localized circulating flow, which is conducive to the improvement of the TPPA's evaporation rate and salt resistance. The salinity gradient is naturally formed in the channel of TPPA, which enables TPPA-5 to show excellent power generation performance. The evaporation rate of TPPA-5 can reach 3.39 kg m-2 h-1 under 1 kW m-2. With methanol as a highly polar proton solvent, the maximum output voltage obtained was 67.534 mV due to the overlapping electric double-layer effect formed by hydrogen protons on the TPPA surface, and the energy utilization efficiency is 95.95%. Moreover, TPPA-5 can purify pesticide-containing wastewater, which has the advantages of being recyclable and environmentally friendly, showing potential application value in the field of seawater desalination and steam co-generation.

Therapeutic potential of single-nucleotide polymorphism-mediated interleukin-6 receptor blockade in cancer treatment: A Mendelian randomization study.

Background: Interleukin-6 (IL-6) is a crucial member of the cytokine network and plays a pivotal role in the pathogenesis of various diseases, including cancer. IL-6 receptor (IL-6R) blockade is widely employed as a therapeutic strategy; however, its efficacy in anticancer therapy remains ambiguous. Methods: An inverse variance-weighted Mendelian randomization (MR) analysis was conducted to assess the causal effects exerted by IL-6R blockade in remediating cancer. Drug-targeted single-nucleotide polymorphisms (SNPs) were introduced within 300 kb of the IL-6R gene. An instrumental variable comprising 26 SNPs represented IL-6 signaling downregulation and C-reactive protein level reduction. Datasets pertaining to the 33 types of cancer investigated in this study were acquired from the FinnGen genome-wide association study. Results: The selected instrumental variable lowered fibrinogen levels, confirming its ability to mimic IL-6R blockade. IL-6R blockade exhibited therapeutic effects on five different cancer types documented in the FinnGen database (N = 334,364, including 76,781 cancer patients): bladder (odds ratios (OR) = 0.563), laryngeal (OR = 0.293), eye (OR = 0.098), gallbladder (OR = 0.059), and myeloid leukemia (OR = 0.442); however, it simultaneously elevated the risk of developing basal cell carcinoma (OR = 1.312) and melanoma (OR = 1.311). Sensitivity analyses did not alter the primary results. Conclusion: Therefore, this study aimed to evaluate the potential and efficacy of SNP-based IL-6R blockade in treating cancer.

3D porous ß-cyclodextrin grafted graphene oxide/sodium alginate superhydrophilic natural polysaccharide-based aerogel for solar steam generation.

Solar steam generation (SSG) emerges as a paramount technology for efficient and sustainable desalination and wastewater purification. The innovative development of porous aerogel materials for solar steam generation heralds a new era in photothermal materials. In this study, a category of ß-cyclodextrin-grafted graphene oxide/sodium anionic polysaccharide alginate composite aerogels (named GO-CD/SA) with solar steam generation behavior and wastewater purification properties is developed. GO-CD/SA demonstrates remarkable properties, including an impressive solar absorption efficiency of approximately 97.4 %, a low thermal conductivity of just 0.124 W m-1 K-1 in a wetted state, and exceptional superhydrophilicity. These attributes collectively contribute to GO-CD/SA achieving an evaporation rate of 1.79 kg m-2 h-1 when utilized with pure water. Furthermore, GO-CD/SA features an abundant three-dimensional porous structure (88.07 % porosity) and superhydrophilic properties that promote the rapid reflux of salt solution between the pore channels. This, in turn, enables excellent salt resistance, with no noticeable salt crystals precipitating during continuous evaporation in 20 % high concentration brine for 6 h. GO-CD/SA also demonstrates outstanding purification capabilities for organic dye wastewater and heavy metal ion wastewater. Therefore, this work combines the advantages of salt tolerance and wastewater treatment, paving the way for the exploration of natural polysaccharide-based photothermal materials.

Carbonized CMPs Hollow Microspheres-Based Hydrogel Composite Membranes with a Hierarchical Architecture for Efficient Solar-Driven Interfacial Evaporation.

Solar-driven interfacial evaporation (SDIE) with excellent photothermal conversion efficiency is emerging as one of the frontier technologies for freshwater production. In this work, novel carbonized conjugate microporous polymers (CCMPs) hollow microspheres-based composite hydrogel membranes (CCMPsHM-CHM) for efficient SDIE are reported. The precursor, CMPs hollow microspheres (CMPsHM), is synthesized by an in situ Sonogashira-Hagihara cross-coupling reaction using a hard template method. The as-synthesized CCMPsHM-CHM exhibit significantly excellent properties, i.e., 3D hierarchical architecture (from micropore to macropore), superior solar light absorption (more than 89%), better thermal insulation (thermal conductivity as low as 0.32-0.42 W m-1K-1 in the wet state), superhydrophilic wettability with a water contact angle (WCA) of 0°, superior solar efficiency (up to 89-91%), a high evaporation rate of 1.48-1.51 kg m-2 h-1 under 1 sun irradiation, and excellent stability which maintains an evaporation rate of more than 80% after 10 cycles and over 83% evaporation efficiency in highly concentrated brine. In this case, the removal rate of metal ions in seawater is more than 99%, which is much lower than the ion concentration standard for drinking water set by the World Health Organization (WHO) and the United States Environmental Protection Agency (USEPA). Taking advantage of its simple and scalable manufacture, our CCMPsHM-CHM may have great potential as advanced membranes for various applications for efficient SDIE in different environments.

Fabrication of ATP/PEG/MnO2NWs composite for solar steam generation with high conversion efficiency.

Solar steam generation is widely used in seawater desalination because of its high efficiency and environmental protection. However, using low-cost materials to produce efficient solar evaporators is a severe challenge. In this study, a porous carbon material was prepared by combining Attapulgite (ATP), Polyethylene glycol (PEG) and Manganese dioxide nanowires (MnO2NWs) composite, through freeze-drying and high-temperature carbonization. The prepared CAPM aerogel shows a three-dimensional porous structure, which has high evaporation properties in pure water and simulated seawater. Under 1 sun simulated illumination, the pure water evaporation is 1.4574 kg m-2h-1 and the corresponding energy conversion efficiency is 85.94%. The prepared CAPM aerogel showed excellent durability and salt tolerance in 20%Nacl solution, indicating that the CAPM has excellent desalinization performance. In addition, CAPM aerogel has and exhibits super hydrophilic properties, which can transfer water molecules quickly. Due to the advantages of low cost, simple preparation method, and high solar energy conversion efficiency, the CAPM has excellent potential as a photothermal material for solar energy generation.

Association of residual feed intake with intestinal microbiome and metabolome in laying period of ducks.

Introduction: Residual feed intake (RFI) is a indicator to evaluate animal feed. This experiment was explored to study the relationship between intestinal microbiome and metabolome of ducks with different residual feed intake during laying period. Methods: A total of 300 Shaoxing ducks aged 42 weeks were randomly selected and fed a diet of 60 d. At the end of the trial, 20 samples were selected according to the phenotype of RFI and divided into two groups (HRFI and LRFI). The cecal microbiota composition was explored by 16S ribosomal RNA gene sequencing and rectal metabolomics uses liquid chromatography-mass spectrometry (LC-MS) to identify the composition of metabolites in a non-targeted manner. Results: Results show feed intake and feed conversion ratio in the group HRFI were significantly higher than those in the group LRFI (p < 0.05). Chao1 indices were higher in the group LRFI than in the HRFI (p < 0.05), Shannon and Simpson indices were higher in the group LRFI than in the HRFI (p < 0.01). After linear discriminant analysis effect size (p < 0.05, LDA score > 3), Rikenellaceae, Rikenellaceae_RC9_gut_group, Lactobacillales and Ruminococcus_2, etc. were significantly enriched in the group LRFI at the genus level, while Prevotellaceae_NK3B31_group and Bacteria were significantly enriched in the group HRFI. After LC-MS analysis we found 338 metabolic difference products and 10 metabolic pathways, including the ABC transporter system, cysteine and methionine metabolism, arginine and proline metabolism, and vitamin B6 metabolism, were identified to be associated with the significantly differentially expressed between the groups LRFI and HRFI (p < 0.05). We hypothesize that the difference between ducks with different RFIs is mainly due to the fact that ducks with LRFI have more SCFAs-producing bacteria in their gut microorganisms, which regulate the RFI of animals. This process we found that Phascolarctobaterium and Anaerobiospirillum may provide energy for ABC transporter system by producing SCFAs, and regulate RFI to improve feed utilization efficiency. Discussion: These results revealed the relationship between microbiome and metabonomics in laying ducks with different RFI, and provided theoretical basis for further study on the relationship between them.

Central medial thalamic nucleus dynamically participates in acute itch sensation and chronic itch-induced anxiety-like behavior in male mice.

Itch is an annoying sensation consisting of both sensory and emotional components. It is known to involve the parabrachial nucleus (PBN), but the following transmission nodes remain elusive. The present study identified that the PBN-central medial thalamic nucleus (CM)-medial prefrontal cortex (mPFC) pathway is essential for itch signal transmission at the supraspinal level in male mice. Chemogenetic inhibition of the CM-mPFC pathway attenuates scratching behavior or chronic itch-related affective responses. CM input to mPFC pyramidal neurons is enhanced in acute and chronic itch models. Specifically chronic itch stimuli also alter mPFC interneuron involvement, resulting in enhanced feedforward inhibition and a distorted excitatory/inhibitory balance in mPFC pyramidal neurons. The present work underscores CM as a transmit node of the itch signal in the thalamus, which is dynamically engaged in both the sensory and affective dimensions of itch with different stimulus salience.

Dietary supplementation of coated sodium butyrate improves growth performance of laying ducks by regulating intestinal health and immunological performance.

Introduction: This study was conducted to assess the effects of dietary supplementation of coated sodium butyrate (CSB) on the growth performance, serum antioxidant, immune performance, and intestinal microbiota of laying ducks. Methods: A total of 120 48-week-old laying ducks were randomly divided into 2 treatment groups: the control group (group C fed a basal diet) and the CSB-treated group (group CSB fed the basal diet + 250 g/t of CSB). Each treatment consisted of 6 replicates, with 10 ducks per replicate, and the trial was conducted for 60 days. Results: Compared with the group C, the group CSB showed a significant increase in the laying rate (p<0.05) of the 53-56 week-old ducks. Additionally, the serum total antioxidant capacity, superoxide dismutase activity and immunoglobulin G level were significantly higher (p<0.05), while the serum malondialdehyde content and tumor necrosis factor (TNF)-a level were significantly lower (p<0.05) in the serum of the group CSB compared to the group C. Moreover, the expression of IL-1b and TNF-a in the spleen of the group CSB was significantly lower (p<0.05) compared to that of the group C. In addition, compared with the group C, the expression of Occludin in the ileum and the villus height in the jejunum were significantly higher in the group CSB (p<0.05). Furthermore, Chao1, Shannon, and Pielou-e indices were higher in the group CSB compared to the group C (p<0.05). The abundance of Bacteroidetes in the group CSB was lower than that in the group C (p<0.05), while the abundances of Firmicutes and Actinobacteria were higher in the group CSB compared to the group C (p<0.05). Conclusions: Our results suggest that the dietary supplementation of CSB can alleviate egg-laying stress in laying ducks by enhancing immunity and maintaining the intestinal health of the ducks.

Projections from the Rostral Zona Incerta to the Thalamic Paraventricular Nucleus Mediate Nociceptive Neurotransmission in Mice.

Zona incerta (ZI) is an integrative subthalamic region in nociceptive neurotransmission. Previous studies demonstrated that the rostral ZI (ZIR) is an important gamma-aminobutyric acid-ergic (GABAergic) source to the thalamic paraventricular nucleus (PVT), but whether the ZIR-PVT pathway participates in nociceptive modulation is still unclear. Therefore, our investigation utilized anatomical tracing, fiber photometry, chemogenetic, optogenetic and local pharmacological approaches to investigate the roles of the ZIRGABA+-PVT pathway in nociceptive neurotransmission in mice. We found that projections from the GABAergic neurons in ZIR to PVT were involved in nociceptive neurotransmission. Furthermore, chemogenetic and optogenetic activation of the ZIRGABA+-PVT pathway alleviates pain, whereas inhibiting the activities of the ZIRGABA+-PVT circuit induces mechanical hypersensitivity and partial heat hyperalgesia. Importantly, in vivo pharmacology combined with optogenetics revealed that the GABA-A receptor (GABAAR) is crucial for GABAergic inhibition from ZIR to PVT. Our data suggest that the ZIRGABA+-PVT pathway acts through GABAAR-expressing glutamatergic neurons in PVT mediates nociceptive neurotransmission.

Mechanically robust conjugated microporous polymer membranes prepared using polyvinylpyrrolidone (PVP) electrospun nanofibers as a template for efficient PM capture.

Air pollution has become a challenging environmental problem worldwide due to rapid industrial development and excessive emissions of vehicle exhaust. Herein, we report a preparation of conjugated microporous polymer membranes (CMPM) with a hierarchical porous structure by electrospun polyvinylpyrrolidone (PVP) nanofibers as a template for effective removal of PM from airborne and vehicle exhaust. CMP membranes have hierarchical holes, where the macropores are from electrospun nanofiber membranes and the mesopores are from polymer synthesis. Taking advantage of its inherent physicochemical and thermal stability and hierarchical hole characteristics, the CMPM-based filter can work continuously for up to 36 h and still maintains a high removal efficiency (>99.56%), and also has a high filtration efficiency in the treatment of vehicle exhausts, with 95.18% for PM0.3, 98% for PM0.5 and >99% for PM2.5-10.0. The superior mechanical properties of CMPM allow the filter to be cleaned and reused. After three cycles, the filtration effectiveness of CMPM is still 94.83% for respirable particulate matter. Under high humidity (RH ≥ 95%) conditions, the CMPM-based filter showed higher than 95.37% filtration of PM0.3-10, and the oil adsorption rate could be maintained at 284% at high speed, proving the great potential of CMPM to clean air in complex situations.

ZnO nanorods loading with fatty amine as composite PCMs device for efficient light-to-thermal and electro-to-thermal conversion.

Phase change materials (PCMs) with ideal light-to-thermal conversion efficiency play an important role in solar energy storage and conversion. Hence, we report the fabrication of a novel composite PCMs (CPCMs) device based on ZnO nanorods deposited indium tin oxide (ITO) glass loading with fatty amines. ZnO nanorods were deposited on the ITO glass using a three-electrode electrodeposition method, and 1-Hexadecylamine (HDA) was loaded on the ITO glass via spin-coating, followed by spraying polypyrrole (ppy) on the surface of CPCM device to improve thermal conductivity and solar absorption. The as-prepared CPCM device exhibits excellent light-to-thermal conversion efficiency, achieving a high conversion efficiency of 90.2% obtained at 1sun owing to its high light absorption (80%), enhanced thermal conductivity (improved by 57.8%), and the unique vertical aligned nanorods structure which could significantly decrease tortuosity, thereby reducing thermal route and lowering thermal response time. Furthermore, the electro-to-thermal conversion efficiency of the CPCMs device has also been investigated and the results show that it can reach up to 69.8% under a low voltage of 5 V, indicating that the CPCM device has a high potential in the field of electro-to-thermal conversion. Based on the benefits listed above, the CPCM device may serve an ideal platform for a wide range of solar energy storage and conversion applications.