Critical Review of Pd-Catalyzed Reduction Process for Treatment of Waterborne Pollutants.

Catalyzed reduction processes have been recognized as important and supplementary technologies for water treatment, with the specific aims of resource recovery, enhancement of bio/chemical-treatability of persistent organic pollutants, and safe handling of oxygenate ions. Palladium (Pd) has been widely used as a catalyst/electrocatalyst in these reduction processes. However, due to the limited reserves and high cost of Pd, it is essential to gain a better understanding of the Pd-catalyzed decontamination process to design affordable and sustainable Pd catalysts. This review provides a systematic summary of recent advances in understanding Pd-catalyzed reductive decontamination processes and designing Pd-based nanocatalysts for the reductive treatment of water-borne pollutants, with special focus on the interactions and transformation mechanisms of pollutant molecules on Pd catalysts at the atomic scale. The discussion begins by examining the adsorption of pollutants onto Pd sites from a thermodynamic viewpoint. This is followed by an explanation of the molecular-level reaction mechanism, demonstrating how electron-donors participate in the reductive transformation of pollutants. Next, the influence of the Pd reactive site structure on catalytic performance is explored. Additionally, the process of Pd-catalyzed reduction in facilitating the oxidation of pollutants is briefly discussed. The longevity of Pd catalysts, a crucial factor in determining their practicality, is also examined. Finally, we argue for increased attention to mechanism study, as well as precise construction of Pd sites under batch synthesis conditions, and the use of Pd-based catalysts/electrocatalysts in the treatment of concentrated pollutants to facilitate resource recovery.

Mismatched duplexed aptamer-isothermal amplification-based nucleic acid-nanoflower for fluorescent detection of okadaic acid.

We developed a highly sensitive fluorescent assay to detect okadaic acid (OA), a prevalent aquatic toxin posing serious health risks. Our approach uses a mismatched duplexed aptamer (DA) immobilized on streptavidin-conjugated magnetic beads (SMBs) to create a DA@SMB complex. In the presence of OA, the cDNA unwinds, hybridizes with a G-rich segment pre-encoding circular template (CT), and undergoes rolling circle amplification (RCA) to produce G-quadruplexes, which are detected using the fluorescent dye thioflavine T (ThT). The method has a LOD of 3.1 × 10-3 ng/mL, a linear range of 0.1 âˆ¼ 1.0 × 103 ng/mL, and was successfully applied to shellfish samples with spiked recoveries of 85.9% ∼ 102.2% and RSD less than 13%. Furthermore, instrumental analysis confirmed the accuracy and reliability of this rapid detection method. Overall, this work represents a significant advancement in the field of rapid aquatic toxin detection and has important implications for public health and safety.

AuFe3@Pd/γ-Fe2O3 Nanosheets as an In Situ Regenerable and Highly Efficient Hydrogenation Catalyst.

Heterogenous Pd catalysts play a pivotal role in the chemical industry; however, it is plagued by S2- or other strong adsorbates inducing surface poisoning long term. Herein, we report the development of AuFe3@Pd/γ-Fe2O3 nanosheets (NSs) as an in situ regenerable and highly active hydrogenation catalyst. Upon poisoning, the Pd monolayer sites could be fully and oxidatively regenerated under ambient conditions, which is initiated by •OH radicals from surface defect/FeTetra vacancy-rich γ-Fe2O3 NSs via the Fenton-like pathway. Both experimental and theoretical analyses demonstrate that for the electronic and geometric effect, the 2-3 nm AuFe3 intermetallic nanocluster core promotes the adsorption of reactant onto Pd sites; in addition, it lowers Pd's affinity for •OH radicals to enhance their stability during oxidative regeneration. When packed into a quartz sand fixed-bed catalyst column, the AuFe3@Pd/γ-Fe2O3 NSs are highly active in hydrogenating the carbon-halogen bond, which comprises a crucial step for the removal of micropollutants in drinking water and recovery of resources from heavily polluted wastewater, and withstand ten rounds of regeneration. By maximizing the use of ultrathin metal oxide NSs and intermetallic nanocluster and monolayer Pd, the current study demonstrates a comprehensive strategy for developing sustainable Pd catalysts for liquid catalysis.

Enhancing Electrocatalytic Hydrodechlorination through Interfacial Microenvironment Modulation.

Electrochemical reduction (ER) is a promising approach to safely remove pollutants. However, sluggish reaction kinetics and significant side reactions considerably limit the applicability of this green process. Herein, we uncovered the previously ignored role of interfacial hydrophilicity in determining the ER performance through electron microscopy observations, contact angle (CA) analysis, and electrochemical measurements. A Pd/C electrocatalyst forms dense nanopores on the electrode surface, rendering it highly hydrophobic and achieving a CA of up to 145°. This imposes a large mass-transfer barrier for the diffusion of water and pollutants into Pd sites. Moreover, the release of H2 is suppressed, which changes the solid-liquid (Pd-polluted water) interface into a solid-gas (H2)-liquid interface. This further slows down mass transfer and the decontamination process. This dilemma can be easily alleviated by adding hydrophilic polymers like polyethylene glycol to increase hydrophilicity and improve mass transfer. By this way, the activity and Faraday efficiency of Pd/C in the electrochemical hydrodehalogenation of 2,4-dichlorophenol could be increased by 4-5 times. Moreover, this interfacial microenvironment modulation strategy is parallel to other approaches, such as Pd structural engineering, and therefore these strategies can be combined to further increase the electrochemical decontamination performance of electrocatalysts.

Hyaluronic Acid-Guided Cerasome Nano-Agents for Simultaneous Imaging and Treatment of Advanced Atherosclerosis.

Early noninvasive screening and regression therapy for vulnerable atherosclerotic plaques remain challenging. In this study, it is aimed to develop a new approach for the active targeting of atherosclerotic plaques with nano-agents to aid imaging and treatment. Biocompatible hyaluronic acid (HA)-guided cerasomes are generated to selectively target CD44-positive cells within the plaque in in vitro studies and in vivo testing in Apoe-/- mice. Rosuvastatin (RST) is encapsulated in the HA-guided cerasome nano-formulation to produce HA-CC-RST, which results in significant plaque regression as compared to treatment with the free drug. Moreover, gadodiamide-loaded HA-CC enhances magnetic resonance images of vulnerable plaques, thereby attaining the goal of improved simultaneous treatment and imaging. Transcriptomic analysis confirms plaque regression with HA-CC-RST treatment, which potentially benefits from the anti-inflammatory effect of RST. In summary, a safe and efficient nano-formulation for the targeted delivery of active agents to atherosclerotic plaques is developed and may be applicable to other diagnostic and therapeutic agents for atherosclerosis treatment.

An Improved Multiple Competitive Immuno-SERS Sensing Platform and Its Application in Rapid Field Chemical Toxin Screening.

Improving the signal-to-noise ratio (SNR) by amplifying the outputting signal or reducing nonspecific binding (NSB) are the key techniques in multiple immunoassay. Aiming at these issues, this paper presents an improved multiple indirect competitive immune surface-enhanced Raman scattering (ci-SERS) assay for the rapid screening of highly toxic rodenticides in food and biological samples, which ensured remarkable accuracy, ultra-sensitivity and reproducibility. The non-fouling polymer brush grafted magnetic beads (the MB@P-CyM) were prepared as multiple competitive recognition substrates after conjugating triplex haptens (the MB@P-CyM-hap). It was demonstrated that the particular 3D hair-like structures of P-CyM not only facilitate conjugate high-density hapten but reduce the steric hindrance from SERS probes recognition, thus enhancing SNB. On the other hand, Au nanoflowers (AuNFs) of high SERS activity were synthesized using a simple one-pot hydrazine reduction. For simultaneously detecting three highly toxic rodenticides, i.e., diphacinone (DPN), bromadiolone (BRD) and tetramine (TET), the obtained AuNFs were fabricated as a SERS-encoded nanoprobe cocktail after successively labeling mono-antibodies/Raman probes. By integrating the MB@P-CyM-hap with the SERS-encoded cocktail, a highly sensitive multiple SERS assay was achieved in less than 2 h with a limit of detection of 0.62 ng mL-1 for BRD, 0.42 ng mL-1 for TET and 1.37 ng mL-1 for DPN, respectively. The recoveries of these rodenticides in spiked food and biological samples were determined and ranged from 72 to 123%. Above all, the proposed modifications show remarkable improvements for high efficient multiple chemical toxin immunoassay.

Research and Application Progress of Geopolymers in Adsorption: A Review.

Geopolymer is a porous inorganic material with a three-dimensional mesh structure, good mechanical properties, a simple preparation process (no sintering) and a low economic cost, and it is environmentally friendly. Geopolymer concrete has been widely used in the construction field, and many other studies have revealed that geopolymer will become one of the most promising inorganic materials with unique structure and properties. This paper provides a review of the development and current status of geopolymers and briefly explains the effects of material proportioning, experimental factors and activators on geopolymer performance. Because of the advantages of high specific surface area and high porosity, geopolymers could be used as adsorbent materials. This paper summarizes the research progresses of the adsorption of metal cations, anions, dyes, and gases by geopolymers, which emphasizes the geopolymer membranes in adsorption, and discusses the challenges and opportunities for the development of more efficient, sustainable and practical adsorption protocols.

Composition and Structure Progress of the Catalytic Interface Layer for Bipolar Membrane.

Bipolar membranes, a new type of composite ion exchange membrane, contain an anion exchange layer, a cation exchange layer and an interface layer. The interface layer or junction is the connection between the anion and cation exchange layers. Water is dissociated into protons and hydroxide ions at the junction, which provides solutions to many challenges in the chemical, environmental and energy fields. By combining bipolar membranes with electrodialysis technology, acids and bases could be produced with low cost and high efficiency. The interface layer or junction of bipolar membranes (BPMs) is the connection between the anion and cation exchange layers, which the membrane and interface layer modification are vital for improving the performance of BPMs. This paper reviews the effect of modification of a bipolar membrane interface layer on water dissociation efficiency and voltage across the membrane, which divides into three aspects: organic materials, inorganic materials and newly designed materials with multiple components. The structure of the interface layer is also introduced on the performance of bipolar membranes. In addition, the remainder of this review discusses the challenges and opportunities for the development of more efficient, sustainable and practical bipolar membranes.

Highly efficient and precise two-step cell selection method for tetramethylenedisulfotetramine-specific monoclonal antibody production.

Monoclonal antibodies (mAbs) are useful biological tools for research, diagnostics, and pharmaceuticals. Here, we proposed a new mAb discovery platform named the two-step cell selection method (TCSM) for mAbs production of some small molecule haptens as antibiotic, toxins, and pesticides. The first step was performed by a fluorescence-activated cell sorter to enrich the hapten-specific B cells, the second step was an image-based precise pick of single hapten-specific hybridoma cells by confocal laser scanning microscopy. In this study, we used tetramethylenedisulfotetramine (TETS) as a model analyte, which is a highly lethal neurotoxic rodenticide. The TETS-specific hybridoma cells selection was completed within 10 days by the TCSM, compared with at least 40 days in the traditional hybridoma method (THM). The half maximal inhibitory concentration (IC50) of the best mAb 1G6 for TETS in the TCSM was 1.98 ng mL-1, and that of mAb 2B6 in the THM was 11.49 ng mL-1. Antibody-TETS recognition also showed more interactions in mAb 1G6 than in mAb 2B6. Then, the mAb 1G6 was then successfully applied to develop an icELISA for TETS in biological samples with satisfactory sensitivity, accuracy and precision. The results demonstrated that the TCSM was a feasible and efficient method for mAb discovering of poisonous hapten molecules.

Construction of a Degradation-Free DNA Conjugated Nanoprobe and Its Application in Rapid Field Screening for Sulfur Mustard.

Sulfur mustard (SM) is a notorious blistering chemical warfare agent. Rapid field screening for trace SM is of vital significance for the detection of antiterrorism and timely treatment. Here, a visual assay for SM was constructed on the basis of its inhibition for the G-quadruplexes/hemin DNAzyme. Specifically, multiple guanine (G)-rich single stranded oligonucleotides (ssODN) named S1 (80% of G in the total bases), i.e., the precursor for G-quadruplex, which could oxide tetramethylbenzidine (TMB) to its green product, were conjugated on the nonfouling polymer brush grafted magnetic beads (MB@P(C-H)). SM could specifically alkylate the N7 and O6 sites of G in the S1; thus, it failed to form the DNAzyme based signal reporter. It was demonstrated that the nonfouling P(C-H) interface on the magnetic bead (MB) could protect the conjugated ssODN from nuclease degradation, thus ensuring its well sensing performance in complex samples. Under the optimized conditions, this method achieved good sensitivity and selectivity with a limit of detection (LOD) as low as 0.26 µmol L-1, and the recoveries ranging from 86% to 117% were obtained for different SM spiked real samples. Above all, this method combining low cost and ready operation could be suited for rapid field SM screening in a wide range of environmental matrices.

In Situ Growth Large Area Silver Nanostructure on Metal Phenolic Network Coated NAAO Film and Its SERS Sensing Application for Monofluoroacetic Acid.

Rapid screening monofluoroacetic acid (FAcOH) is responsible for preventing chemical poisoning and food safety events. Whereas surface enhanced Raman scattering (SERS) spectra is an effective tool for detecting forbidden chemicals, it is difficult to directly detect FAcOH due to its small Raman scattering cross section as well as weak adsorption on SERS substrates. In this work, the metal phenolic supramolecular networks (MPNs, i.e., the tannic acid and Fe3+ complex) were fabricated on the commercial nanoanodic aluminum oxide film (NAAO) for assisting in situ chemical deposition highly uniform Ag nanostructure over large areas (the NAAO@AgNS). The low cost and simple fabrication process made the NAAO@AgNS a single-use consumable. For FAcOH detection, a specific derivative reaction between FAcOH and thiosalicylic acid (TSA) was introduced. By taking TSA as the Raman probe, its SERS signal attenuated constantly with the increasing amount of FAcOH. For improving quantitative accuracy, thiocyanate (SCN-) was introduced on the NAAO@AgNS as an internal standard; thus, the characteristic peak intensity ratios associated with TSA and SCN- (I1035/I2125) were fitted to the concentration of FAcOH. It was demonstrated that the SERS assay achieved good sensitivity and selection toward FAcOH with the limit of quantitation (LOD) as low as 50 nmol L-1. The NAAO@AgNS featured with highly sensitive, uniform, and consistent SERS performances could easily extend to wide SERS applications.

Synergistic Recognition-Triggered Charge Transfer Enables Rapid Visual Colorimetric Detection of Fentanyl.

As a new psychoactive substance, abuse of fentanyl (FTN) is currently spreading around the world, resulting in an urgent need of on-site and rapid analytical methods for detection of FTN. Here, we present a synergistic recognition strategy for rapid, cost-effective, selective, sensitive, and visual colorimetric detection of FTN by taking advantage of Rose Bengal (RB) as the specific probe. This assay is based on the halogen- and hydrogen-bonding interactions between them, generating a charge transfer and accompanying a red shift in the RB absorption band as well as color change from red to purple. The utility of the present visual colorimetric assay is demonstrated in aqueous solution, diluted urine, and domestic sewage samples. A detection limit of 0.7 mg·L-1 in aqueous solution is achieved, and the naked-eye detection of FTN is also realized in different real matrices within 6 min. Moreover, this method is insusceptible to interference from various substances (other opioids, cutting agents of street drugs, FTN precursors, amino acids, and small-molecular amines). Additionally, we successfully fabricate a smartphone-based portable device to determine FTN, which is appropriate for field tests. The present work not only provides the first visual assay for FTN but also reveals the molecular structure-property relationship, which will guide the design and development of various probes for recognizing FTN.

Magnetic assisted fluorescence immunoassay for sensitive chloramphenicol detection using carbon dots@CaCO3 nanocomposites.

Analytical methods with high sensitivities and short assay times are urgently required for the screening of "zero tolerance" hazardous substances in food. Herein, we propose a fluorescent immunoassay for the highly sensitive and rapid analysis of chloramphenicol (CAP) based on carbon dots (CDs)-encapsulated CaCO3 nanospheres and magnetic nanoparticles (MNPs). The fluorescent immunoprobes were prepared by coupling the anti-CAP antibodies to carboxymethyl cellulose-functional CDs@CaCO3 nanospheres. Chitosan-modified MNPs with "core-shell" structures were prepared and then conjugated to the CAP hapten, acting as the nano-carrier and interface for the immunoreaction. With the assistance of MNPs, the established fluorescent immunoassay achieved the sensitive detection of CAP in chicken with a limit of detection of 0.03 µg kg-1 and recoveries ranging from 83.7%-105.0%. The analysis results of the fluorescent immunoassay were evaluated by the enzyme-linked immunosorbent assay, having a correlation coefficient of 0.981. Our work provides a rapid, facile, and reliable strategy for the highly sensitive analysis of food contaminants based on "green" fluorescent nanoprobes.

Homogeneous fluorescent immunoassay for the simultaneous detection of chloramphenicol and amantadine via the duplex FRET between carbon dots and WS2 nanosheets.

Herein, we proposed a duplex and homogeneous fluorescent immunoassay for the simultaneous detection of amantadine (AMD) and chloramphenicol (CAP) residue in chicken breast with both high sensitivity and short assay time. The immunoassay was based on the fluorescence resonance energy transfer (FRET) between hapten-labeled carbon dots (CDs) and antibody-modified WS2 nanosheets. To achieve the duplex FRET, polyethyleneimine-functionalized blue and green emissive CDs with separated emission were synthesized via a one-pot hydrothermal method and directly coupled with the haptens of AMD and CAP, serving as the energy donors. The antibodies were modified on the surface of WS2 nanosheets with high quenching efficiency to construct the energy acceptor. The specific immunoreaction could trigger the efficient FRET between the donors and the acceptors, causing the fluorescence quenching of CDs. The developed immunoassay was applied to simultaneously detect AMD and CAP, having the detection limit of 0.10 ng g-1 and 0.06 ng g-1, respectively.

Sequential Recovery of Heavy and Noble Metals by Mussel-Inspired Polydopamine-Polyethyleneimine Conjugated Polyurethane Composite Bearing Dithiocarbamate Moieties.

Dithiocarbamate-grafted polyurethane (PU) composites were synthesized by anchoring dithiocarbamate (DTC) as a chelating agent to the polyethyleneimine-polydopamine (PE-DA)-functionalized graphene-based PU matrix (PE-DA@GB@PU), as a new adsorbent material for the recovery of Cu2+, Pb2+, and Cd2+ from industrial effluents. After leaching with acidic media to recover Cu2+, Pb2+, and Cd2+, dithiocarbamate-grafted PE-DA@GB@PU (DTC-g-PE-DA@GB@PU) was decomposed and PE-DA@GP was regenerated. The latter was used to recover Pd2+, Pt4+, and Au3+ from the copper leaching residue and anode slime. The present DTC-g-PE-DA@GB@PU and PE-DA@GB@PU composites show high adsorption performance, effective separation, and quick adsorption of the target ions. The morphologies of the composites were studied by scanning electron microscopy and their structures were investigated by Fourier transform infrared (FT-IR) spectroscopy and Raman spectroscopy. The effects of pH values, contact time, and initial metal ion concentration conditions were also studied. An adsorption mechanism was proposed and discussed in terms of the FT-IR results.

Ultrasensitive On-Site Detection of Biological Active Ricin in Complex Food Matrices Based on Immunomagnetic Enrichment and Fluorescence Switch-On Nanoprobe.

Ricin is a highly toxic protein largely existing in castor beans, which could be used as a warfare agent due to its unique properties. As a deadenylase, inactivation of ricin means a loss of its toxic threat. Therefore, developing simple, accurate, and sensitive on-site detection of biologically active ricin in wide types of complex matrices is most valuable. Here, antifouling polymer brush modified magnetic beads were prepared first and post modified with ricin monoclonal antibody (the MB@P(C-H)-mAbricin) to efficiently capture ricin from various foods and biological matrices. Active ricin obtained in this manner were sequentially determined by a new designed AuNP/QDs nanoassembly. In this double strand oligodeoxynucleotides (dsODN) linked core-satellite nanoprobe, the fluorescence of satellite QDs was extensively quenched by AuNPs due to the dipole-metal interaction. Active ricin can react with its specific depurination substrates which had been inserted in the dsODN linkers. This reaction would trigger the separation of QDs from Au cores by cutting multiple adenines, and then result in the restoration of QDs fluorescence. By coupling with the magnetic enrichment, this AuNP/QDs nanoprobe provided a qualitative result for active ricin in the range from 10.0 to 100.0 ng mL-1 with the limit of detection as low as 7.46 ng mL-1. Compared with previously proposed methods, this on-site detection strategy offered an easy to handle on-site test for trace amounts of active ricin in a wide range of complex matrices.

Efficient Degradation of Phenol and 4-Nitrophenol by Surface Oxygen Vacancies and Plasmonic Silver Co-Modified Bi2 MoO6 Photocatalysts.

In this work, the surface plasmon resonance effect of metallic Ag, surface oxygen vacancies (SOVs), and Bi2 MoO6 (BMO) material were rationally combined to construct new oxygen-vacancy-rich Ag/Bi2 MoO6 (A/BMO-SOVs) photocatalysts. Their synergistic effect on the photocatalytic degradation of phenol and 4-nitrophenol under visible-light irradiation (λ≥420 nm) was also investigated. TEM, EPR, and Raman spectra demonstrate the co-existence of metallic Ag nanoparticles, surface oxygen vacancies, and Bi2 MoO6 due to a controlled calcination process. The experimental results disclose that the 2 %A/BMO-SOVs-375 sample exhibited the highest photocatalytic activity for the degradation of both phenol and 4-nitrophenol under visible-light irradiation, achieving nearly 100 and 80 % removal efficiency, respectively, and demonstrated the apparent reaction rate constants (kapp ) 183 and 26.5 times, respectively, higher than that of pure Bi2 MoO6 . The remarkable photodegradation performance of A/BMO-SOVs for organic substances is attributed to the synergistic effect between the surface oxygen vacancies, metallic Ag nanoparticles, and Bi2 MoO6 , which not only improves the visible-light response ability, but also facilitates charge separation. Thus, this work provides an effective strategy for the design and fabrication of highly efficient photocatalysts through integrating surface oxygen vacancies and the surface plasmon resonance effect of nanoparticles, which has the potential for both water treatment and air purification.

Highly sensitive SERS immunosensor for the detection of amantadine in chicken based on flower-like gold nanoparticles and magnetic bead separation.

Here we report a novel ultrasensitive surface-enhanced Raman scattering (SERS) immunosensor based on the flower-like gold nanoparticles (AuNFs) and magnetic bead separation for homogeneous detection of amantadine (AMD) in chicken just by one-step. The 5, 5'-dithiobis (2-nitrobenzoicacid) (DTNB) modified AuNFs and N-(1-adamantyl) ethylenediamine (AEDA) conjugated denatured BSA (AEDA-dBSA) was used as the SERS nanoprobe. And the capture probe was anti-AMD monoclonal antibody (mAbs)-functionalized magnetic beads (MNBs-mAbs). An immunoreaction occurred between free AMD and SERS nanoprobe for competing limited binding sites of MNBs-mAbs. This work combined inherent sensitive property of SERS with antibody-antigen highly specificity recognition for the AMD detection. The analytical results showed that the SERS-based immunosensor was sensitive, simple and reliable with a limit of detection (LOD) of 0.005 ng/mL for AMD, which were 2 orders of magnitude better than an enzyme-linked immunosorbent assay based on the same immunoreagents. Analysis of AMD-spiked chicken samples revealed that the developed immunosensor provided accepted recoveries ranging from 74.76%-89.34% with coefficient of variation less than 15.04%. This strategy represents a simple, reliable, and universal approach for detection of chemical contaminants in food samples.

Fast on-Site Visual Detection of Active Ricin Using a Combination of Highly Efficient Dual-Recognition Affinity Magnetic Enrichment and a Specific Gold Nanoparticle Probe.

Ricin, a highly toxic protein, is a controlled substance by both the Chemical Weapons Convention (CWC) and the Biological Weapons Convention (BWC). Therefore, fast precaution of potential ricin toxin plays an important role in national security and public safety. Herein, a simple, sensitive, and accurate visual detection of active ricin in complex samples is presented by combining magnetic affinity enrichment with a specific gold nanoparticle (AuNP) probe. In the first step, a dual-recognition magnetic absorbent was fabricated by simultaneously incorporating two different affinity ligands (concanavalin A and galactosamine) on low-foul polymer brushes grafted magnetic beads, which showed remarkable multivalent synergy binding capacity for ricin even under complex interfering environments. Subsequently, a homoadenine-constituted oligodeoxynucleotide named poly(21dA) was conjugated to AuNPs (the poly(21dA)-AuNPs), which served as a specific depurination substrate of active ricin. Coralyne can trigger the intact poly(21dA)-AuNPs aggregate by forming a non-Watson-Crick homoadenine/coralyne complex, but the poly(21dA)-AuNPs after reacting with active ricin failed to form this complex due to the loss of adenines. Based on these facts, active ricin can be detected as low as 12.5 ng mL-1 with the naked eyes. This detection strategy could be well-applied in various ricin-spiked complex matrices. The features such as ready operation, facile readout, and easy accessibility make the assay a better choice for fast on-site active ricin detection.

Tracking the Fate of Surface Plasmon Resonance-Generated Hot Electrons by In Situ SERS Surveying of Catalyzed Reaction.

Plasmonic catalysis is an emerging process that utilizes surface plasmon resonance (SPR) process to harnesses solar energy for the promotion of catalyzed reactions. In most cases, SPR generated hot electrons (HEs) play an indispensable role in this solar-chemical energy shift process. Therefore, understanding the effectiveness of the HEs in promoting chemical reactions, and identifying the key factors that contribute to this utilization efficiency is of profound importance. Herein, the authors outline an in situ surface enhanced Raman spectroscopy protocol to track the fate of HEs. This is based on the unheeded HEs-acceleration nature of the p-nitirothiophenol hydrogenation reaction. By this way, the authors discover that unlike Au@Pd nanostructures which experience a 20-fold increase in rate constant, HEs primary leak to surrounding H+ /O species through Ag pinholes in Ag@Pd. This work sheds light on why Ag is seldom employed as a plasmonic cocatalyst, and provides a new viewpoint to design plasmonic nanocatalysts with efficient light utilization.