Early patellar tendon rupture after total knee arthroplasty: A direct repair method.

BACKGROUND: Patellar tendon rupture after total knee arthroplasty (TKA) is a catastrophic complication. Although the occurrence of this injury is rare, it can lead to significant dysfunction for the patient and is very tricky to deal with. There has been no standard treatment for early patella tendon rupture after TKA, and long-term follow-up data are lacking. AIM: To introduce a direct repair method for early patella tendon rupture following TKA and determine the clinical outcomes and complications of this method. METHODS: During the period of 2008 to 2021, 3265 consecutive TKAs were retrospectively reviewed. Twelve patients developed early patellar tendon rupture postoperatively and were treated by a direct repair method. Mean follow-up was 5.7 years. Demographic, operative, and clinical data were collected. The clinical outcomes were assessed using the Western Ontario and McMaster Universities (WOMAC) score, the Hospital for Special Surgery (HSS) score, knee range of motion, extensor lag, and surgical complications. Descriptive statistics and paired t test were employed to analyze the data. RESULTS: For all 12 patients who underwent direct repair for early patellar tendon rupture, 3 patients failed: One (8.3%) for infection and two (17.6%) for re-fracture. The two patients with re-fracture both underwent reoperation to reconstruct the extensor mechanism and the patient with infection underwent revision surgery. The range of motion was 109.2° ± 10.6° preoperatively to 87.9° ± 11° postoperatively, mean extensor lag was 21° at follow-up, and mean WOMAC and HSS scores were 65.8 ± 30.9 and 60.3 ± 21.7 points, respectively. CONCLUSION: This direct repair method of early patellar tendon rupture is not an ideal therapy. It is actually ineffective for the recovery of knee joint function in patients, and is still associated with severe knee extension lag and high complication rates. Compared with the outcomes of other repair methods mentioned in the literature, this direct repair method shows poor clinical outcomes.

Different squatting positions after total knee arthroplasty: A retrospective study.

BACKGROUND: Total knee arthroplasty (TKA) has been shown to improve quality of life and reduce pain. High-flexion activities such as squatting, kneeling, and floor transfers are mainly listed as demanding tasks. Among them, squatting is an important position. AIM: To provide a new squat position classification and evaluate the different squatting positions of a series of patients after primary TKA. METHODS: From May 2018 to October 2019, we retrospectively reviewed 154 video recordings of the squatting-related motions of patients after TKA. Among the included patients, 119 were women and 35 were men. Their mean age at the index surgery was 61.4 years (range, 30 to 77). RESULTS: The median follow-up was 12 mo (range, 6 to 156 mo). We classified those squatting-related motions into three major variations according to squatting depth: Half squat, parallel squat, and deep squat. The angles of hip flexion, knee flexion, and ankle dorsiflexion were measured in the screenshots captured from the videos at the moment of squatting nadir. A total of 26 patients were classified as half squats, 75 as parallel squats, and 53 as deep squats. The angles of hip flexion, knee flexion, and ankle dorsiflexion all differed significantly among the three squatting positions (P < 0.001). In the parallel squat group, the mean knee flexion angle (°) was 116.5 (SD, 8.1; range, 97 to 137). In the deep squat group, the mean knee flexion angle (°) was 132.5 (SD, 9.3; range, 116 to 158). CONCLUSION: Among the three squatting positions, deep squat showed the highest hip, knee, and ankle flexion angles, followed by the parallel squat. With the improvement of squatting ability, the patient's postoperative satisfaction rate was also significantly enhanced. However, the different squatting abilities of the patients cannot be effectively distinguished from the scoring results (P > 0.05). Our squatting position classification offers a pragmatic approach to evaluating patients' squatting ability after TKA.

[Application of individualized setting of femoral opening point and valgus angle in artificial total knee arthroplasty for patients with external femoral arch].

OBJECTIVE: To investigate whether shifting the femoral opening point and setting a personalized femoral valgus angle can improve the lower limb force line of total knee arthroplasty (TKA) patients with external femoral arch. METHODS: From March 2016 to October 2018, 50 patients (55 knees) with osteoarthritis with genu varus deformity combined with external femoral arch for TKA were selected. There were 10 males and 40 females. The age ranged from 63.1 to 80.5 years old, with an average of (67.8±5.8) years old. Forty-five cases were unilateral and 5 cases were bilateral. The osteoarthritis stages of 55 knees were Kellgren-Lawrence grade Ⅲ to Ⅳ; and the course of disease ranged from 2 to 10 years. PreoperativeSpecial Surgery (Hospital for Special Surgery) scores:pain was 15.20±3.52; function was 8.30±2.96;mobility was 10.15±2.85;muscle strength was 4.20±1.95;flexion deformity was 5.50±3.05;stability was 6.15±2.20; total score was 47.93±3.39. The external femoral arch angle ranged from 6.4° to 16.7°, with a mean of (10.63±2.29) °. The tibiofemoral angle ranged from 7.4° to 12.6°, with a mean of (12.04±3.59)°. The anatomical distal femoral angle ranged from 83.10° to 91.20°, with a mean of (84.55± 1.66)°. And the distance from the center of the knee joint to the lower limb line of force ranged from 2.01 to 6.00 cm, with a mean of (3.57±1.12) cm. During the replacement surgery, the femoral opening point and the valgus angle were individually set to obtain a good line of force of the lower limbs. RESULTS: Before the operation, the distance of femoral opening point ranged from 0.24 to 0.74 cm, with a mean of (0.54±0.10) cm. The distance between the internal and external condyles of the femur ranged from 6.86 to 8.12 cm, with a mean of (7.27±0.27) cm. The preoperative valgus correction angle (VCA) ranged from 7.20° to 13.80°, with a mean of (9.38±1.38) °. The post-correction valgus correction angle' (VCA') ranged from 6.10° to 9.50°, with a mean of (7.36±0.82) °. All patients were followed up, and the duration ranged from 3 to 36 months, with an average of (13.5±5.8) months. All patients obtained good knee function after operation. Three months after operation, HSS scores included pain of 25.30±3.05, function of 18.25±2.05, mobility of 16.05±0.75, muscle strength of 6.20±2.10, flexion deformity of 8.80±1.85, stability of 8.20±1.75; and the total score ranged from 90.00 to 93.00, with an average of 91.82±0.98. The total score was higher than that before operation (t=1.728, P=0.038). Postoperative X-ray examination showed that there were no signs of loosening, sinking, or osteolysis of the prosthesis. The tibiofemoral angle on the weight-bearing X-ray on the second day after surgery ranged from 1.30° to 4.90°, with a mean of (2.53±0.83) °;the angle ranged from 87.50° to 91.30°, with a mean of (88.73±0.86) °;and the distance from the center of the knee joint to the lower limb line of force ranged from 0.02 cm to 1.20 cm, with a mean of (0.23±0.05) cm; which were improved compared with those before operation (t=2.415, P=0.019;t=1.496, P=0.041;t=1.912, P=0.033). CONCLUSION: In TKA combined with external femoral arch, good lower limb force line and knee joint function can be obtained by externally shifting the femoral opening point and setting a personalized femoral valgus angle.

Factors influencing knee valgus alignment in Crowe type IV hip dysplasia after total hip arthroplasty.

BACKGROUND: Valgus deformity of the knee remains a complaint after total hip arthroplasty (THA) among some patients with Crowe type IV hip dysplasia. We aimed to identify the knee alignment in these patients before and after surgery, and to explore the factors contributing to postoperative knee valgus alignment. MATERIALS AND METHODS: We retrospectively reviewed a series of Crowe type IV patients who received THA between February 2010 and May 2019 in our hospital. The patients' medical data were collected from the hospital information system. On both preoperative and postoperative full limb length standing radiographs, the following parameters were measured: hip-knee-ankle angle (HKA), mechanical lateral distal femoral angle (mLDFA), medial proximal tibial angle, anatomical tibiofemoral angle, anatomical lateral distal femoral angle, femoral neck-shaft angle, pelvic obliquity, limb length, height and lateral distance of hip center, and femoral offset. Univariate and multivariate binary logistic regression were used to identify the factors influencing postoperative knee valgus alignment. RESULTS: A total of 64 Crowe type IV patients (87 hips) were included in the study. Overall, HKA improved from 176.54 ± 3.52° preoperatively to 179.45 ± 4.31° at the last follow-up. Those hips were subdivided into non-valgus group (≥ 177.0°, n = 65) and valgus group (< 177.0°, n = 22) according to postoperative HKA. Only postoperative mLDFA was a significant factor in the multivariate regression model. CONCLUSIONS: The postoperative mLDFA is a major factor related to knee valgus alignment after THA, which combines the preoperative anatomy and surgical reconstruction. Other factors previously published were found to have no significance. LEVEL OF EVIDENCE: III.

The Influence of Femoral Proximal Medullary Morphology on Subtrochanteric Osteotomy in Total Hip Arthroplasty for Unilateral High Dislocated Hips.

OBJECTIVE: To evaluate the predictive values of femoral proximal medullary morphology for the use of subtrochanteric osteotomy (STO) in unilateral Crowe IV developmental dysplasia of the hip (DDH). METHODS: Ninety four patients with unilateral Crowe type IV DDH (59 hips in STO group and 35 hips in the non-STO group) between April 2008 and June 2019 were enrolled. All patients underwent THA using the Pinnacle acetabular shell, ceramic liner and femoral head, the S-ROM stem with proximal sleeve. Three parameters on the standard anteroposterior hip radiographs were measured: the widths of medullary canals at 20 mm above the center of lesser trochanter (CLT)，20 mm below the CLT and the isthmus. Canal flare index (CFI), metaphyseal canal flare index (MCFI), diaphyseal canal flare index (DCFI) were calculated. A S-ROM femoral stem was used in all patients during total hip arthroplasty (THA). RESULTS: The CFI and DCFI in the STO group were lower than those in the non-STO group. However, there was no statistical difference in MCFI between the two groups. The receiver operating characteristic (ROC) curves shown that DCFI had the highest area under the curve (AUC), at 0.885. This was followed by the CFI, which had an AUC of 0.847. The AUC of MCFI was 0.579. The optimal threshold for DCFI was 1.44, which lead to a sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of 0.771, 0.898, 0.869, and 0.818, respectively. For CFI, the optimal threshold was 3.28, resulting in a sensitivity, specificity, PPV, and NPV of 0.829, 0.729, 0.878, and 0.644, respectively. CONCLUSIONS: The DCFI and CFI may be potent indicators in predicting the use of STO in unilateral Crowe IV DDH. The optimal threshold for CFI and DCFI were 3.28 and 1.44 and had good sensitivity and specificity for predicting the use of STO during THA.

False acetabulum is preoperative guidance for Crowe type IV hips on hip reduction without femoral shortening during total hip arthroplasty.

BACKGROUND: We aimed to analyze if the false acetabulum is a good indicator for determining femoral shortening. METHODS: We retrospectively included 102 patients with unilateral Crowe type IV developmental dysplasia who underwent primary total hip arthroplasty from April 2008 to May 2019. Based on the presence of false acetabulum, the 102 hips were further classified Crowe IVA group and Crowe IVB group. Radiographic measurement included the height of greater trochanter (HGT) preoperatively and postoperatively, which reflected the distalisation of greater trochanter (DGT). Harris hip score (HHS), limb length discrepancy (LLD), and complications were collected as clinical evaluation. RESULTS: Sixty hips were classified into Crowe IVA group, and 42 hips were classified into Crowe IVB group. Within Crowe IVA group, the proportion of hips treated with subtrochanteric osteotomy was significantly higher than that in Crowe IVB group (97% vs. 12%) (P < 0.001). The DGT in Crowe IVA group was also greater (67 vs. 32 mm) (P < 0.001). At last follow-up, both two groups obtained excellent clinical scores. There was no significant difference in postoperative LLD between the two groups (P = 0.001). Six dislocations occurred and three patients developed femoral nerve palsy, while all recovered in a year. CONCLUSION: The false acetabulum is a promising and good indicator for determining femoral shortening.

Jumbo cup in hip joint renovation may cause the center of rotation to increase.

BACKGROUND: Utilizing the large jumbo cup in revision total hip arthroplasty is an effective approach to cure many lacunar and segmental peripheral bone defects. However, with the use of the jumbo cup, the center of the hip joint may become elevated relative to the primary acetabulum, and the diameter of the large cup is greater. AIM: To study the height and the significance of the elevation of the hip joint center. METHODS: Eighty-eight patients matched the criteria for this condition and were included in the study. The center height of the hip joint was measured relative to the opposite normal hip joint. The diameter of the jumbo cup was measured and checked according to operation notes, and the diameter of the jumbo cup was measured with a prosthesis label. Then, the horizontal and vertical centers of rotation were measured on the surgical side and opposite side. The average center height of the hip joint on the renovated side and the opposite side and the position of the hip cup relative to the teardrop were compared using a paired t-test. RESULTS: Radiometric analysis showed that the average hip joint center was elevated by 7.6 mm. The rotational center height delta of the renovated hip was 7.6 ± 5.6 mm, and there was an obvious difference between the two groups (P = 0.00). The difference in horizontal distance was 0.5 ± 5.1 mm (-11.5 -14.0 mm), and there was no obvious difference between the two groups (P = 0.38). According to the foreign standard, the rotational center height delta of the renovated hip was 7.5 ± 6.2 mm, and there was a significant difference between the two groups (P = 0.00). There was no obvious difference between the domestic and foreign standards (P > 0.05) between the two groups. CONCLUSION: The application of the jumbo cup elevates the rotational center of the hip joint, but it is feasible and effective to use the jumbo cup.

The Three-Dimensional Morphology of Femoral Medullary Cavity in the Developmental Dysplasia of the Hip.

OBJECTIVE: This study aimed to assess the morphology of the femoral medullary canal in subjects with developmental dysplasia of the hip (DDH) with the intent of improving the design of femoral stems in total hip arthroplasty. METHODS: Computed tomography images of 56 DDH hips, which were classified into Crowe I to Crowe IV, and 30 normal hips were collected and used to reconstruct three-dimensional morphology of the femoral medullary cavity. Images of twenty-one cross sections were taken from 20 mm above the apex of the lesser trochanter to the isthmus. The morphology of femoral cavity was evaluated on each cross section for the longest canal diameter, the femoral medullary torsion angle (FMTA), and the femoral medullary roundness index (FMRI). RESULTS: The Crowe IV group displayed the narrowest medullary canal in the region superior to the end of the lesser trochanter, but then gradually aligned with the medullary diameter of the other groups down to the isthmus. The FMTA along the femoral cavity increased with the severity of DDH, but the rate of variation of FMTA along the femoral canal was consistent in the DDH groups. The DDH hips generally showed a larger FMRI than the normal hips, indicating more elliptical shapes. CONCLUSION: A femoral stem with a cone shape in the proximal femur and a cylindrical shape for the remainder down to the isthmus may benefit the subjects with severe DDH. This design could protect bone, recover excessive femoral anteversion and facilitate the implantation in the narrow medullary canal.

Posteromedial Corner Release with the Knee in Figure-of-Four Position vs Conventional Position for Varus Knee Arthroplasty.

OBJECTIVE: To introduce posteromedial corner release with the knee in the figure-of-four position versus the conventional position for varus knee arthroplasty. METHODS: This is a retrospective study. From March 2015 to September 2019, a series of 123 patients (139 knees) with varus knee were randomly and blindly allocated to experimental group (60 patients; 68 knees) and control group (57 patients; 65 knees). Patients in experimental group underwent posteromedial corner release with the knee in the figure-of-four position; and patients in control group with the knee in the conventional position. If soft tissue balance was not completely achieved or the medial gap was still tight, an additional loosening technique were used to achieve symmetric medial and lateral space in both groups. Time for soft tissue balancing was defined as the time from the start of the spacer test to the end of the balance test. Length of release was defined as the distance from the osteotomy surface of the tibial plateau to the farthest structures released. The rating system of Hospital for Special Surgery (HSS) knee score was used to evaluate the clinical results. Quantitative variables were described as mean and standard deviation, and compared by one-way analysis of variance. RESULTS: The mean age of experimental group and control group was 70.2 ± 8.7 years and 68.7 ± 6.2 years, respectively (P > 0.05). Preoperatively, the mean HSS score of the groups was 38.2 ± 11.3 and 39.1 ± 10.7, respectively (P > 0.05). The mean varus knee angle was 19.7° ± 9.3° and 19.3° ± 10.7°, respectively (P > 0.05). The mean time for soft tissue balancing was 8.4 ± 3.3 min and 11.3 ± 6.9 min in experimental and control group, respectively (P < 0.05). The mean length of releasing posteromedial corner structures was 35.5 ± 13.4 mm and 27.3 ± 9.7 mm in experimental and control group, respectively (P < 0.05). Additional special loosening techniques were performed in eight knees in experimental group and seven knees in control group. The HSS scores 5 years after surgery were 95.1 ± 16.9 and 94.8 ± 17.2 respectively (P > 0.05). No complications were found during the follow-up time, and the clinical symptoms were observed to be significantly improved in the patients. CONCLUSION: The posteromedial corner can be released more extensively and thoroughly when the knee is placed in the figure-of-four position during varus knee arthroplasty.

The Variation of the Pelvis in Unilateral Crowe Type IV Developmental Dysplasia of the Hip.

OBJECTIVE: To investigate variation of the pelvis in unilateral Crowe type IV developmental dysplasia of the hip (DDH) and analyze the reliability of pelvic landmarks. METHODS: We retrospectively received preoperative anteroposterior pelvic radiographs for 89 adult patients with unilateral Crowe type IV DDH at our institution between September 2008 and May 2019. Forty-eight patients without a false acetabulum was type IVA and 41 with a false acetabulum was type IVB. The heights of the ilium, acetabulum, and ischium areas in affected and unaffected sides were measured. The ratios of the three areas in entire pelvis are calculated. The discrepancies of bilateral iliac crest, inferior sacroiliac articulation, teardrop, and ischial tuberosity on the bisector of the pelvis were also measured. RESULTS: The mean heights of the ilium, acetabulum, ischium areas in the affected side were 74.4, 88.6, and 37.0 mm, respectively, in type IVA group and 77.7, 83.5, and 37.8 mm, respectively, in type IVB group. The heights in the unaffected side were 82.1, 84.6, and 43.8 mm, respectively, in type IVA group and 84.6, 82.0, and 44.0 mm, respectively, in type IVB group. The ratios of the ilium, acetabulum, ischium areas in affected side of Crowe type IVA group were 0.37, 0.44, and 0.19, respectively, and the ratios in unaffected side were 0.39, 0.40, and 0.21, respectively. The ratios in affected side of Crowe type IVB group were 0.39, 0.42, and 0.19, respectively, and the ratios in unaffected side were 0.40, 0.39, and 0.21, respectively. The discrepancies of bilateral iliac crest, inferior sacroiliac articulation, teardrop, and ischial tuberosity on the line of the bisector of the pelvis in Crowe type IVA group were 5.6, 5.2, 2.0, and 7.1 mm, respectively. Those in Crowe type IVB group were 8.1, 3.5, 3.5, and 4.9 mm, respectively. CONCLUSIONS: Pelvic asymmetry was a common occurrence in unilateral Crowe type IV DDH in adults. Furthermore, it should be reliable to use teardrop as pelvic landmark to balance leg length discrepancy in preoperative planning.

Single-stage total knee arthroplasty and femoral osteotomy for osteoarthritis with severe supracondylar deformity.

BACKGROUND: Knee osteoarthritis associated with extra-articular deformity (EAD) can confront the arthroplasty surgeons with challenges of bone resection and soft tissue balancing. The aim of this study was to describe a single-stage procedure associating corrective osteotomy with total knee arthroplasty (TKA), and to determine the outcome at mid- to long-term follow-up. METHODS: A total of seven patients (seven knees) with knee osteoarthritis and supracondylar deformity were included in this study. Six patients were female, and one was male, with the median age of 62 years (range, 37-76 years). All patients were treated with single-stage TKA and femoral osteotomy. Osteotomy was fixed with long cemented stem. Hospital of Special Surgery (HSS) scores, collateral ligament laxity, and range of motion (ROM) were clinically evaluated preoperatively and at each follow-up. Radiographic parameters including the mechanical axis deviation (MAD), mechanical lateral distal femoral angle (mLDFA), mechanical proximal tibial angle (mMPTA), and joint line congruence angle (JLCA) were also measured. The occurrence of perioperative complications was recorded. RESULTS: The median follow-up time was 91 months (range, 38-104 months). At the last follow-up, all components were stable and no patients required revision. Nonunion of the osteotomy occurred in one patient. In all patients, the lower limb mechanical alignment improved greatly. The mean angle of MAD was restored from 10.49±6.05 cm preoperatively to 1.11±4.97 cm postoperatively. The 90° mLDFA was almost acquired in all cases, with the postoperative value of 90.79±2.40°. After operation, the mMPTA improved from 84.18±6.13° to 91.33±3.13°. The JLCA changed from 2.94±1.61° to -0.71±3.50°. The median HSS score improved from 45 (range, 34-56) preoperatively to 90 (range, 82-97) postoperatively, with the outcome of all patients rated good to excellent. The median ROM improved from 70° (range 0-110°) preoperatively to 105° (range 90-125°) postoperatively. No instability of knee joint was observed. Complications included an intraoperative split fracture of distal femur and one case of wound exudation resulting from fat liquefaction. CONCLUSIONS: For knee osteoarthritis with femoral supracondylar deformity, single-stage TKA and corrective osteotomy was feasible but technically demanding. The use of long cemented stem for osteotomy fixation can provide reliable rotational control of the bone segments.

What Is the Optimal Timing for Reading the Leukocyte Esterase Strip for the Diagnosis of Periprosthetic Joint Infection?

BACKGROUND: The leucocyte esterase (LE) strip test often is used to diagnose periprosthetic joint infection (PJI). In accordance with the manufacturer's directions, the LE strip test result is read 3 minutes after exposing it to joint fluid, but this has not been supported by robust research. Moreover, we have noted that the results of the LE strip test might change over time, and our previous studies have found that centrifugation causes the results of the LE strip test to degrade. Still, there is no evidence-based recommendation as to when to read the LE strip test to maximize diagnostic accuracy, in general, and the best reading times for the LE strip test before and after centrifugation need to be determined separately, in particular. QUESTIONS/PURPOSES: (1) What is the optimal timing for reading LE strip test results before centrifugation to diagnose PJI? (2) What is the optimal timing for reading LE strip test results after centrifugation to diagnose PJI? METHODS: This study was a prospective diagnostic trial. In all, 120 patients who were scheduled for revision arthroplasty and had signs of infection underwent joint aspiration in the outpatient operating room between July 2018 and July 2019 and were enrolled in this single-center study. For inclusion, patients must have had a diagnosis of PJI or nonPJI, valid synovial fluid samples, and must not have received antibiotics within 2 weeks before arthrocentesis. As such, 36 patients were excluded; 84 patients were included for analysis, and all 84 patients agreed to participate. The 2018 International Consensus Meeting Criteria (ICM 2018) was used for the classification of 49 patients with PJI (score ≥ 6) and 35 without PJI (score ≤ 2). The classification was used as the standard against which the different timings for reading LE strips were compared. All patients without PJI were followed for more than 1 year, during which they did not report the occurrence of PJI. All patients were graded against the diagnostic criteria regardless of their LE strip test results. In 83 patients, one drop of synovial fluid (50 µL) was applied to LE strips before and after centrifugation, and in one patient (without PJI), the sample was not centrifuged because the sample volume was less than 1.5 mL. The results of the strip test were read on an automated colorimeter. Starting from 1 minute after centrifugation, these strips were automatically read once every minute, 15 times (over a period of 16 minutes), and the results were independently recorded by two observers. Results were rated as negative, ±, 1+, and 2+ upon the machine reading. Grade 2+ (dark purple) was used as the threshold for a positive result. An investigator who was blinded to the study performed the statistics. Optimal timing for reading the LE strip before and after centrifugation was determined by using receiver operative characteristic (ROC) analysis. The specificity, sensitivity, and positive predictive and negative predictive values were calculated for key timepoints. RESULTS: Before centrifugation, the area under the curve was the highest when the results were read at 5 minutes (0.90 [95% CI 0.83 to 0.98]; sensitivity 0.88 [95% CI 0.75 to 0.95]; specificity 0.89 [95% CI 0.72 to 0.96]). After centrifugation, the area under the curve was the highest when the results were read at 10 minutes (0.92 [95% CI 0.86 to 0.98]; sensitivity 0.65 [95% CI 0.50 to 0.78]; specificity 0.97 [95% CI 0.83 to 1.00]). CONCLUSION: The LE strip test results are affected by time and centrifugation. For samples without centrifugation, we found that 5 minutes after application was the best time to read LE strips. We cannot deny the use of centrifuges because this is an effective way to solve the sample-mingling problem at present. We recommend 10 minutes postapplication as the most appropriate time to read LE strips after centrifugation. Multicenter and large-sample size studies are warranted to further verify our conclusion. LEVEL OF EVIDENCE: Level II, diagnostic study.

Pseudotumor and repeated dislocation after total hip arthroplasty with ceramic-on-metal bearing: a case report.

Pseudotumor is a rare complication following total hip arthroplasty (THA) with ceramic-on-metal (CoM) bearings. There is still in controversy about the using of CoM bearings when conducting surgery. We reported a case of a 47-year-old woman who underwent cementless CoM bearing THA because of left Crowe type III dislocation of the hip (DDH) in December 2009. One year after THA, she presented at our hospital complaining of crunching noise, pain, and decreased level of function. A revision surgery was performed because of left hip instability in December 2010, we adjusted the excessive anteversion of stem and replaced the head by using the long-neck ceramic head. In February 2019, she was admitted to our hospital complaining of repeated dislocation and fracture of greater trochanter. During the re-revision surgery, a pseudotumor and grey synovial sac were revealed. The metal liner was replaced with a ceramic liner and the greater trochanter was reattached using the Cable-Ready system. Clinical outcome was successful at 6 months postoperatively. This case vividly demonstrated CoM bearing should be avoided in THA. The pseudotumor highly destructed the periprosthetic soft tissues and the bone, which leaded to dislocation and periprosthetic fracture. The surgeon should be aware of the complication so that prompt diagnosis and treatment can be performed.

Patient's Perception on Leg Length Discrepancy After Total Hip Arthroplasty in Patients with Unilateral Crowe Type IV Developmental Dysplasia of the Hip.

PURPOSE: The study assessed the correlation among the patients' perception of leg length discrepancy (LLD) after total hip arthroplasty (THA) in patients with unilateral Crowe type IV developmental dysplasia of the hip (DDH) and the four methods of measuring the leg length in the full-length standing anteroposterior radiographs. METHODS: Sixty patients with unilateral Crowe type IV DDH were recruited in this retrospective study between January 2012 and January 2019. Four methods of measurement were used: 1) TD-TP: distance between the inferior aspect of teardrop (TD) and the midpoint of tibial plafond (TP); 2) CH-TP: distance between the center of the hip (CH) or acetabular cup and the TP; 3) GT-TP: distance between the apex of greater trochanter (GT) and the TP; and 4) FL+TL: the sum of femoral length (FL) and tibial length (TL). RESULTS: Association was found among the patients' perception on LLD with difference in TD-TP (OR=1.157), and the difference in FL+TL (OR=1.166). The area under the curve of the difference in FL+TL and the difference TD-TP (0.704 and 0.679) was significantly higher than those of the difference in CH-TP and the difference in GT-TP (0.564 and 0.483). With the calculated threshold of LLD set at 9.0 mm, the sensitivity and specificity of the difference in TD-TP and the difference in FL+TL were 57.7%, 79.4% and 61.5%, 79.4%, respectively. CONCLUSION: Patients' perception on LLD had good correlation and reliability on the difference of FL+TL and the difference of TD-TP on both sides in the full-length standing anteroposterior radiographs after THA in patients with unilateral Crowe type IV DDH. The calculated threshold of the difference in FL+TL and the difference in TD-TP was set at 9.0 mm to assess the patients' perception on LLD.

One-Stage Total Hip Arthroplasty with Modular S-ROM Stem for Patients with Bilateral Crowe Type IV Developmental Dysplasia.

OBJECTIVE: The aim of the present paper was to evaluate the results of one-stage total hip arthroplasty (THA) for patients with bilateral Crowe type IV developmental dysplasia of the hip (DDH). METHODS: Data for 58 patients (116 hips) with bilateral Crowe type IV DDH who had one-stage THA performed by the same surgeon during the period of April 2008 to February 2019 were retrospectively reviewed. The mean age of the patients was 37.3 years; 5 were men and 53 were women. All patients underwent THA through the posterolateral approach using the Pinnacle acetabular cup, a ceramic-on-ceramic bearing, and the modular S-ROM stem. Subtrochanteric shortening osteotomy was performed on 86/116 hips. Intraoperative conditions were recorded. Radiographic and functional outcomes were evaluated, and complications were recorded. RESULTS: All patients were followed up for an average of 71.3 ± 37.6 months (range, 12-140). The mean operative time was 276.5 ± 57.9 min (range, 175-540). The mean intraoperative blood loss was 933.6 ± 400.8 mL (range, 300-2000). The mean transfusion requirement was 1778 ± 798.0 mL (range, 575-4550). The mean length of hospital stay was 8.6 ± 3.7 days (range, 5-22). At the final follow-up, no loosening of acetabular and femoral components was observed. No osteolysis and heterotopic ossification occurred. The mean Harris hip scores were improved from 55.4 ± 14.3 preoperatively to 91.3 ± 4.2 postoperatively (P < 0.001) In terms of complications, no perioperative deaths were recorded. Deep vein thrombosis occurred in 1 hip, with no pulmonary embolism. Intraoperative femur fracture occurred in 3 hips, nerve injury in 1 hip, and leg length discrepancy in 1 patient. Postoperative dislocation occurred in 5 hips and nonunion in 1 hip. CONCLUSION: Our data demonstrated that one-stage bilateral THA for bilateral Crowe type IV DDH is feasible and can effectively restore hip function.

Management of Medial Collateral Ligament Insufficiency During Total Knee Arthroplasty with a Screw and Rectangular Spiked Washer: A Case Series of 14 Patients.

OBJECTIVE: To describe the technique of primary repair of medial collateral ligament (MCL) insufficiency using a screw and rectangular spiked washer in a case series of 14 patients. METHODS: Fourteen patients undergoing MCL repair by a screw and rectangular spiked washer during TKA between March 2018 and March 2019 were retrospectively reviewed. Among them, half injuries were avulsion of the femoral origin, and the other half were MCL laxity. There were 12 women and two men included in the study, with an average age of 63.6 years (range, 49-79 years) at the time of surgery. This series were followed up with a focus on range of motion (ROM), coronal alignment, Hospital for Special Surgery (HSS) knee scores, their subjective sense of joint instability, and related complications. At the last follow-up, function of the MCL was assessed by manually applying a valgus stress to the knee at both 0° and 30° of knee flexion. RESULTS: The mean follow-up time for all patients was 15.6 months (range, 13-20 months). Repair of the MCL was successful in all patients. ROM improved from a mean of 70.7° ± 35.1° before surgery to 103.9° ± 6.8° at latest follow-up (P = 0.001). All patients were able to perform a half squat easily, but none were able to do full squatting. The mean preoperative HSS score was 43.6 ± 13.4 and increased to a mean of 85.6 ± 3.8 postoperatively (P < 0.001). The femorotibial angle improved from a mean of -3.22° ± 9.47° before surgery to a mean of 5.16° ± 3.14° at the final follow-up (P = 0.006). At the time of final follow-up, no patient required revision and manipulation under anesthesia following the index arthroplasty. No radiolucencies or migration were observed in association with the knee prostheses. No displacement of the screw and rectangular spiked washer was found. There were no clinical complications. No patient reported subjective instability of the knee. Upon physical examination, no patient was found to have laxity in the coronal plane in either 30° of flexion or full extension. CONCLUSIONS: The screw and rectangular spiked washer is a simple and effective method for treating MCL sufficiency in TKA, and a study with a larger cohort and extended follow-up is requisite to claim its role in preventing coronal instability and component failure.

Finite Element Assessment of the Screw and Cement Technique in Total Knee Arthroplasty.

BACKGROUND: The screw and cement technique is a convenient method used to rebuild medial tibial plateau defects in primary total knee arthroplasty (TKA). The objective of this study was to perform a finite element assessment to determine the effect of different numbers of screws on the stability of TKA and to determine whether differences exist between two different insertion angles. METHOD: Six tibial finite element models with defects filled with screws and cement and one model with defects filled only with cement were generated. Contact stresses on the surface of cancellous bone in different areas were calculated. RESULTS: Compared to the cement-only technique, the stress on the border of cancellous bone and bone cement decreased by 10% using the screw and cement technique. For bone defects with a 12% defect area and a 12-mm defect depth, the use of 1 screw achieved the greatest stability; for those with a 15% defect area and a 20-mm defect depth, 2 screws achieved the greatest stability. CONCLUSIONS: (1) The screw and cement technique is superior to the bone cement-only technique. For tibial defects in which the defect area comprises a large percentage but the depth is less than 5 mm, the screw and cement technique is recommended. (2) Vertical screws can achieve better stability than oblique screws. (3) Screws should be used in moderation for different defects; more is not always better.

Model to Predict Need for Subtrochanteric Shortening Osteotomy During Total Hip Arthroplasty for Crowe Type IV Developmental Dysplasia.

BACKGROUND Indications for subtrochanteric shortening osteotomy (SSOT) during Crowe type IV developmental dysplasia of the hip (DDH) are unclear. The aim of this retrospective study was to create a model to predict the need for performing SSOT. MATERIAL AND METHODS One hundred forty-nine patients (186 hips) with Crowe Type IV DDH who underwent total hip arthroplasty (THA) with S-ROM implants from January 2010 to November 2018 were included in the study. The acetabular components were placed at the true acetabulum and the trial femoral component was inserted. Reduction then was attempted and if it could not be achieved, SSOT was performed. Using multivariable Cox regression analysis, a model was constructed that included age, sex, surgical history, use of a cone- or triangle-shaped sleeve, secondary acetabulum formation, and percentage of dislocation as predictive factors for SSOT. RESULTS SSOTs were performed on 140 of 186 hips. Secondary acetabulum formation was present in 27 hips (58.70%) in which SSOT was not performed 7 (5.00%) in which it was performed. Cone-shaped sleeves were used in 17 hips (36.96%) in which SSOT was not performed versus 15 (10.71%) hips in which it was performed. Dislocation occurred in 31.30±5.80% hips in which SSOT was performed versus 24.05±4.39% of those in which it was not performed. Percentage of dislocation was associated with an increased likelihood of SSOT (odds ratio [OR] 1.24, 95% confidence interval 1.11-1.38), whereas secondary acetabulum formation (OR 0.10, 0.03-0.33) and use of a cone-shaped sleeve (0.18, 0.06-0.53) were associated with decreased likelihood of SSOT. We established a model for prediction of SSOT with a nanogram and the discriminative ability (C statistic) of it was 0.918 (0.79-0.92). CONCLUSIONS Factors that significantly affect likelihood of performing an SSOT were identified and a model with significant ability to predict the need for SSOT in patients with Crowe Type IV DDH was created.

Reverse reaming distraction for acetabular reconstruction of chronic pelvic discontinuity.

BACKGROUND: The acetabular distraction technique demonstrates encouraging radiographic and clinical outcomes in treating chronic pelvic discontinuity. The aim of this study is to describe a modified distraction technique and to show our results. METHODS: This study identified 12 cases of chronic pelvic discontinuity undergoing primary or revision total hip arthroplasty (THA) with the technique of reverse reaming distraction between July 2015 and November 2018. All 12 patients had a minimum follow-up of 12 months. Radiographs were reviewed to inspect for component loosening. Clinical assessment included the Harris hip score (HHS) and an ambulatory scoring system. RESULTS: At the time of final follow-up, no patient was revised. One patient had up to 1 cm migration of the cup in a horizontal or vertical direction and more than 20° change in the abduction angle but was asymptomatic. In the remaining 11 patients, no migration of the component was detected. Both the HHS and ambulatory score showed improvement in all patients. There were no perioperative complications. No postoperative dislocation occurred. CONCLUSIONS: Reverse reaming distraction is a feasible technique in treatment of chronic pelvic discontinuity, with encouraging results at early term. However, ongoing follow-up is required to determine the long-term prognosis in patients receiving this technique.

Reconstruction of Paprosky type IIIB acetabular bone defects using a cup-on-cup technique: A surgical technique and case series.

BACKGROUND: Paprosky type IIIB acetabular bone defects are very difficult to reconstruct. For severe defects, we developed our own cup-on-cup technique. We defined the tantalum metal (TM) revision shell with the peripheral titanium ring removed as a TM-cup augment and the cementless hemispherical acetabulum component combined with a TM-cup augment as the cup-on-cup technique. AIM: To report the short-term results of patients with type IIIB acetabular bone defects reconstructed using the cup-on-cup technique. METHODS: We retrospectively reviewed six patients (six hips) with a mean age of 59 years who underwent acetabular reconstruction using our cup-on-cup technique between January 2015 and January 2017. All acetabular bone defects were classified as type IIIB without pelvic discontinuity using the system of Paprosky. All patients were followed both clinically and radiographically for a mean duration of 42 mo. RESULTS: The mean Harris hip score improved from 32.4 pre-operatively to 80.7 at the last follow-up. The mean vertical position of the hip rotation centre changed from 60.9 mm pre-operatively to 31.7 mm post-operatively, and the mean horizontal position changed from 33.6 mm pre-operatively to 38.9 mm post-operatively. Greater trochanteric migration after extended trochanteric osteotomy occurred in one of six hips at 3 mo. There was no evidence of component migration at the last follow-up. CONCLUSION: The short-term results suggest that our cup-on-cup technique could be considered an effective management option for Paprosky type IIIB acetabular bone defects without pelvic discontinuity.