Multifunctional Zincophilic Hydrogel Electrolyte with Abundant Hydrogen Bonds for Zinc-Ion Capacitors and Supercapacitors.

The new-generation flexible Zn-ion capacitors (ZICs) require multifunctionality and environmental adaptability for practical applications. This essentially means that hydrogel electrolytes are expected to possess superior mechanical properties, temperature resistance, and tunable interface properties to resist flexibility loss and performance degradation over a wide operating temperatures range. Herein, a multifunctional polyzwitterionic hydrogel electrolyte (PAM/LA/PSBMA) with wide operating temperatures, excellent tensile ability, high water retention, and self-adhesion is designed. Molecular dynamics simulations and experimental results show that polar functional groups (-COO-, -SO3-, -C═O, and -NHCO-) in the hydrogel can form abundant hydrogen bonds with water molecules, which can destroy the original hydrogen bonds (HBs) network between the water molecules and have a low freezing point. It can also form coordination with Zn2+, so that the deposition of Zn2+ electric field homogenization effectively alleviates the growth of Zn dendrites. On this basis, the constructed Zn//Zn cell can be stably cycled 290 h at 10 mA cm-2 (1 mA h cm-2). The constructed ZICs and supercapacitor have a high specific capacitance, excellent energy density, good ionic conductivity, and long cycling stability. This study provides guidance on molecular design for the development of integrated multifunctional smart electronic devices that are environmentally adaptable, resistant to drying, and highly flexible.

Title High Solar-Thermal Conversion Aerogel for Efficient Atmospheric Water Harvesting.

The shortage of freshwater is a global problem, however, the gel that can be used for atmospheric water harvesting (AWH) in recent years studying, suffer from salt leakage, agglomeration, and slow water evaporation efficiency. Herein, a solar-driven atmospheric water harvesting (SAWH) aerogel is prepared by UV polymerization and freeze-drying technique, using poly(N-isopropylacrylamide) (PNIPAm), hydroxypropyl cellulose (HPC), ethanolamine-decorate LiCl (E-LiCl) and polyaniline (PANI) as raw materials. The PNIPAm and HPC formed aerogel networks makes the E-LiCl stably and efficiently loaded, improving the water adsorption-desorption kinetics, and PANI achieves rapid water vapor evaporation. The aerogel has low density ≈0.12-0.15 g cm-3, but can sustain a weight of 1000 times of its own weight. The synergist of elements and structure gives the aerogel has 0.46-2.95 g g-1 water uptake capability at 30-90% relative humidity, and evaporation rate reaches 1.98 kg m-2 h-1 under 1 sun illumination. In outdoor experiments, 88% of the water is harvesting under natural light irradiation, and an average water harvesting rate of 0.80 gwater gsorbent -1 day-1. Therefore, the aerogel can be used in arid and semi-arid areas to collect water for plants and animals.

Rapid Radiation Synthesis of a Flexible, Self-Healing, and Adhesive Ionogel with Environmental Tolerance for Multifunctional Strain Sensors.

Ionogels are increasingly used in flexible strain sensors, but it is still challenging to incorporate multifunctional properties such as flexibility, self-healing, adhesion, temperature resistance, and electrical conductivity. Herein, a facile and rapid one-step photoinitiated polymerization strategy is employed to prepare multifunctional ionogels by filling a hydrophobic and conductive ionic liquid into a flexible, hydrophobic fluoropolymer matrix. Thanks to the presence of abundant noncovalent interactions (hydrogen-bonding and ion-dipole interactions), the ionogels exhibit high transparency, excellent mechanical properties, self-healing ability, and adhesion. Moreover, rich C-F bonds in the fluoropolymer matrix can eliminate the interference of water molecules, resulting in excellent environmental tolerance such as high and low temperature resistance, waterproofness, and anticorrosion. Furthermore, the ionogel-based wearable strain sensor can sensitively detect and differentiate human movements and subtle muscle movements and serve as a Morse code signal transmitter for information transmission. The presented work provides an effective method to develop versatile flexible conductive ionogels for wearable devices and ionotronics.

An asymmetric supercapacitor based on controllable WO3 nanorod bundle and alfalfa-derived porous carbon.

A novel asymmetric supercapacitor (ASC) is assembled on the basis of an inerratic hexagonal-like WO3 nanorod bundle as a negative electrode and graphene-like alfalfa-derived porous activated carbon (APAC) as the positive electrode in 1 M H2SO4 aqueous electrolyte. The WO3 nanostructures prepared at pH of 1.6, 1.8, 2.0, 2.5 and 3.0 display hexagonal disc-like, nanorod bundle, inerratic hexagonal-like, sphere-like, and needle-shaped nanorod morphology. WO3-2.0, which was prepared at a pH of 2.0, exhibits high specific capacitance (415.3 F g-1 at 0.5 A g-1). APAC-2, which had the mass ratios of dried alfalfa and ZnCl2 as 1 : 2, showed a 3D porous structure, large surface area (1576.3 m2 g-1), high specific capacitance (262.1 F g-1 at 0.5 A g-1), good cycling stability with 96% of initial specific capacitance after 5000 consecutive cycles. The ASC assembled with WO3-2.0 and APAC-2 exhibits high energy density (27.3 W h kg-1 at a power density of 403.1 W kg-1), as well as good electrochemical stability (82.6% capacitance retention after 5000 cycles). Such outstanding electrochemical behavior implies that the electrode materials are promising for practical energy-storage systems.

Nanostructure selenium compounds as pseudocapacitive electrodes for high-performance asymmetric supercapacitor.

The electrochemical performance of an energy conversion and storage device like the supercapacitor mainly depends on the microstructure and morphology of the electrodes. In this paper, to improve the capacitance performance of the supercapacitor, the all-pseudocapacitive electrodes of lamella-like Bi18SeO29/BiSe as the negative electrode and flower-like Co0.85Se nanosheets as the positive electrode are synthesized by using a facile low-temperature one-step hydrothermal method. The microstructures and morphology of the electrode materials are carefully characterized, and the capacitance performances are also tested. The Bi18SeO29/BiSe and Co0.85Se have high specific capacitance (471.3 F g-1 and 255 F g-1 at 0.5 A g-1), high conductivity, outstanding cycling stability, as well as good rate capability. The assembled asymmetric supercapacitor completely based on the pseudocapacitive electrodes exhibits outstanding cycling stability (about 93% capacitance retention after 5000 cycles). Moreover, the devices exhibit high energy density of 24.2 Wh kg-1 at a power density of 871.2 W kg-1 in the voltage window of 0-1.6 V with 2 M KOH solution.

Nitrogen-doped porous carbon derived from biomass waste for high-performance supercapacitor.

High capacitance property and low cost are the pivotal requirements for practical application of supercapacitor. In this paper, a low cost and high capacitance property nitrogen-doped porous carbon with high specific capacitance is prepared. The as-prepared nitrogen-doped porous carbon employing potato waste residue (PWR) as the carbon source, zinc chloride (ZnCl2) as the activating agent and melamine as nitrogen doping agent. The morphology and structure of the carbon materials are studied by scanning electron microscopy (SEM), N2 adsorption/desorption, X-ray diffraction (XRD) and Raman spectra. The surface area of the nitrogen-doped carbon which prepared under 700°C is found to be 1052m(2)/g, and the specific capacitance as high as 255Fg(-1) in 2M KOH electrolyte is obtained utilize the carbon as electrode materials. The electrode materials also show excellent cyclability with 93.7% coulombic efficiency at 5Ag(-1) current density of for 5000cycles.

Formation of carbon nanosheets via simultaneous activation and catalytic carbonization of macroporous anion-exchange resin for supercapacitors application.

Two-dimensional mesoporous carbon nanosheets (CNSs) have been prepared via simultaneous activation and catalytic carbonization route using macroporous anion-exchange resin (AER) as carbon precursor and ZnCl2 and FeCl3 as activating agent and catalyst, respectively. The iron catalyst in the skeleton of the AER may lead to carburization to form a sheetlike structure during the carbonization process. The obtained CNSs have a large number of mesopores, a maximum specific surface area of 1764.9 m(2) g(-1), and large pore volume of 1.38 cm(3) g(-1). As an electrode material for supercapacitors application, the CNSs electrode possesses a large specific capacitance of 283 F g(-1) at 0.5 A g(-1) and excellent rate capability (64% retention ratio even at 50 A g(-1)) in 6 mol L(-1) KOH. Furthermore, CNSs symmetric supercapacitor exhibits specific energies of 17.2 W h kg(-1) at a power density of 224 W kg(-1) operated in the voltage range of 0-1.8 V in 0.5 mol L(-1) Na2SO4 aqueous electrolyte, and outstanding cyclability (retains about 96% initial capacitance after 5000 cycles).