Microwave-Solvothermal Synthesis of Mesoporous CeO2/CNCs Nanocomposite for Enhanced Room Temperature NO2 Detection.

Nitrogen dioxide (NO2) gas sensors are pivotal in upholding environmental integrity and human health, necessitating heightened sensitivity and exceptional selectivity. Despite the prevalent use of metal oxide semiconductors (MOSs) for NO2 detection, extant solutions exhibit shortcomings in meeting practical application criteria, specifically in response, selectivity, and operational temperatures. Here, we successfully employed a facile microwave-solvothermal method to synthesize a mesoporous CeO2/CNCs nanocomposite. This methodology entails the rapid and comprehensive dispersion of CeO2 nanoparticles onto helical carbon nanocoils (CNCs), resulting in augmented electronic conductivity and an abundance of active sites within the composite. Consequently, the gas-sensing sensitivity of the nanocomposite at room temperature experienced a notable enhancement. Moreover, the presence of cerium oxide and the conversion of Ce3+ and Ce4+ ions facilitated the generation of oxygen vacancies in the composites, thereby further amplifying the sensing performance. Experimental outcomes demonstrate that the nanocomposite exhibited an approximate 9-fold increase in response to 50 ppm NO2 in comparison to pure CNCs at room temperature. Additionally, the CeO2/CNCs sensor displayed remarkable selectivity towards NO2 when exposed to gases such as NH3, CO, SO2, CO2, and C2H5OH. This straightforward microwave-solvothermal method presents an appealing strategy for the research and development of intelligent sensors based on CNCs nanomaterials.

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer.

High performance organic solar cells (OSCs) are usually realized by using post-treatment and/or additive, which can induce the formation of metastable morphology, leading to unfavorable device stability. In terms of the industrial production, the development of high efficiency as-cast OSCs is crucially important, but it remains a great challenge to obtain appropriate active layer morphology and high power conversion efficiency (PCE). Here, efficient as-cast OSCs are constructed via introducing a new polymer acceptor PY-TPT with a high dielectric constant into the D18:L8-BO blend to form a double-fibril network morphology. Besides, the incorporation of PY-TPT enables an enhanced dielectric constant and lower exciton binding energy of active layer. Therefore, efficient exciton dissociation and charge transport are realized in D18:L8-BO:PY-TPT-based device, affording a record-high PCE of 18.60% and excellent photostability in absence of post-treatment. Moreover, green solvent-processed devices, thick-film (300 nm) devices, and module (16.60 cm2) are fabricated, which show PCEs of 17.45%, 17.54%, and 13.84%, respectively. This work brings new insight into the construction of efficient as-cast devices, pushing forward the practical application of OSCs.

Non-halogenated Solvent-Processed Organic Solar Cells with Approaching 20 % Efficiency and Improved Photostability.

The development of high-efficiency organic solar cells (OSCs) processed from non-halogenated solvents is crucially important for their scale-up industry production. However, owing to the difficulty of regulating molecular aggregation, there is a huge efficiency gap between non-halogenated and halogenated solvent processed OSCs. Herein, we fabricate o-xylene processed OSCs with approaching 20 % efficiency by incorporating a trimeric guest acceptor named Tri-V into the PM6:L8-BO-X host blend. The incorporation of Tri-V effectively restricts the excessive aggregation of L8-BO-X, regulates the molecular packing and optimizes the phase-separation morphology, which leads to mitigated trap density states, reduced energy loss and suppressed charge recombination. Consequently, the PM6:L8-BO-X:Tri-V-based device achieves an efficiency of 19.82 %, representing the highest efficiency for non-halogenated solvent-processed OSCs reported to date. Noticeably, with the addition of Tri-V, the ternary device shows an improved photostability than binary PM6:L8-BO-X-based device, and maintains 80 % of the initial efficiency after continuous illumination for 1380 h. This work provides a feasible approach for fabricating high-efficiency, stable, eco-friendly OSCs, and sheds new light on the large-scale industrial production of OSCs.

Brain tumor detection based on a novel and high-quality prediction of the tumor pixel distributions.

The work presented in this paper is in the area of brain tumor detection. We propose a fast detection system with 3D MRI scans of Flair modality. It performs 2 functions, predicting the gray level distribution and location distribution of the pixels in the tumor regions and generating tumor masks with pixel-wise precision. To facilitate 3D data analysis and processing, we introduce a 2D histogram presentation encompassing the gray-level distribution and pixel-location distribution of a 3D object. In the proposed system, specific 2D histograms highlighting tumor-related features are established by exploiting the left-right asymmetry of a brain structure. A modulation function, generated from the input data of each patient case, is applied to the 2D histograms to transform them into coarsely or finely predicted distributions of tumor pixels. The prediction result helps to identify/remove tumor-free slices. The prediction and removal operations are performed to the axial, coronal and sagittal slice series of a brain image, transforming it into a 3D minimum bounding box of its tumor region. The bounding box is utilized to finalize the prediction and generate a 3D tumor mask. The proposed system has been tested extensively with the data of more than 1200 patient cases in BraTS2018∼2021 datasets. The test results demonstrate that the predicted 2D histograms resemble closely the true ones. The system delivers also very good tumor detection results, comparable to those of state-of-the-art CNN systems with mono-modality inputs. They are reproducible and obtained at an extremely low computation cost and without need for training.

MiR-339-5p inhibits replication of porcine reproductive and respiratory syndrome virus by targeting viral gene regions.

Porcine reproductive and respiratory syndrome virus (PRRSV) is a variable virus, whose spread cannot be totally stopped by vaccination. PRRSV infection results in abortion and respiratory symptoms in pregnant pigs. One crucial component of the anti-viral infection strategy is microRNA (miRNA), a class of multifunctional small molecules. It is unknown whether miR-339-5p can specifically target the PRRSV gene and prevent the virus from replicating, despite the fact that miR-339-5p is markedly up-regulated during the PRRSV infection. In this pursuit, the present study revealed that the two PRRSV areas targeted by miR-339-5p were PRRSV nsp2-3378 to 3403 and PRRSV nsp2-3112 to 3133 using the miRanda program. Dual luciferase reporter assays showed that the miR-339-5p target region of the PRRSV gene sequence exhibited 100% homology and was highly conserved. Furthermore, the ability of miR-339-5p to target PRRSV gene areas was verified. It was found that the overexpression of miR-339-5p markedly reduced the PRRSV replication through PRRSV infection trials. The precursor sequence of ssc-miR-339-5p was amplified using the DNA of pig lung tissue as a template in order to create a fragment of 402 bp of porcine-derived miR-339-5p precursor sequence, which was then used to produce the eukaryotic expression plasmid of miR-339-5p. In conclusion, miR-339-5p can target the specific PRRSV gene areas and prevent PRRSV replication, offering fresh perspectives for the creation of medications that combat the PRRSV infection.

Spatiotemporal distribution and dynamics evolution of artificial intelligence development in China.

The quantified measurement and comprehensive analysis of artificial intelligence development (AIDEV) are vital for countries to form AI industrial ecology and promote the long-term development of regional AI technology. Based on the innovation ecosystems (IE) theory, this paper constructs an evaluation system to measure and analyze the spatiotemporal distribution and dynamic evolution of the AIDEV in China from 2011 to 2020. The results show that the AIDEV of China presents an overall upward trend and an obvious unbalance in the spatial distribution which is "eastern > central > western". Meanwhile, the provinces of low-level AIDEV are catching up with the high-level provinces, which leads to the regional difference of AIDEV narrowing. Moreover, the concentration and polarization phenomenon of AIDEV in China has been weakening and the AIDEV will continue to increase in the next three years. Further, there is a significantly positive spatial autocorrelation of AIDEV. Finally, high AIDEV provinces will increase the probability of surrounding provinces' AIDEV to develop. This paper expands the research stream in the field of AI research, extends the application scenarios of IE theory, and puts forward some relevant policy recommendations.

Solid Additive Dual-Regulates Spectral Response Enabling High-Performance Semitransparent Organic Solar Cells.

Semi-transparent organic solar cells (ST-OSCs) possess significant potential for applications in vehicles and buildings due to their distinctive visual transparency. Conventional device engineering strategies are typically used to optimize photon selection and utilization at the expense of power conversion efficiency (PCE); moreover, the fixed spectral utilization range always imposes an unsatisfactory upper limit to its light utilization efficiency (LUE). Herein, a novel solid additive named 1,3-diphenoxybenzene (DB) is employed to dual-regulate donor/acceptor molecular aggregation and crystallinity, which effectively broadens the spectral response of ST-OSCs in near-infrared region. Besides, more visible light is allowed to pass through the devices, which enables ST-OSCs to possess satisfactory photocurrent and high average visible transmittance (AVT) simultaneously. Consequently, the optimal ST-OSC based on PP2+DB/BTP-eC9+DB achieves a superior LUE of 4.77%, representing the highest value within AVT range of 40-50%, which also correlates with the formation of multi-scale phase-separated morphology. Such results indicate that the ST-OSCs can simultaneously meet the requirements for minimum commercial efficiency and plant photosynthesis when integrated with the roofs of agricultural greenhouses. This work emphasizes the significance of additives to tune the spectral response in ST-OSCs, and charts the way for organic photovoltaics in economically sustainable agricultural development.

Simple and Efficient Synthesis of Novel Tetramers with Enhanced Glass Transition Temperature for High-Performance and Stable Organic Solar Cells.

Oligomer acceptors in organic solar cells (OSCs) have garnered substantial attention owing to their impressive power conversion efficiency (PCE) and long-term stability. However, the simple and efficient synthesis of oligomer acceptors with higher glass transition temperatures (Tg ) remains a formidable challenge. In this study, we propose an innovative strategy for the synthesis of tetramers, denoted as Tet-n, with elevated Tg s, achieved through only two consecutive Stille coupling reactions. Importantly, our strategy significantly reduces the redundancy in reaction steps compared to conventional methods for linear tetramer synthesis, thereby improving both reaction efficiency and yield. Furthermore, the OSC based on PM6:Tet-1 attains a high PCE of 17.32 %, and the PM6:L8-BO:Tet-1 ternary device achieves an even more higher PCE of 19.31 %. Remarkably, the binary device based on the Tet-1 tetramer demonstrates outstanding operational stability, retaining 80 % of the initial efficiency (T80 ) even after 1706 h of continuous illumination, which is primarily attributed to the enhanced Tg (247 °C) and lower diffusion coefficient (1.56×10-27  cm2 s-1 ). This work demonstrates the effectiveness of our proposed approach in the straightforward and efficient synthesis of tetramers materials with higher Tg s, thus offering a viable pathway for developing high-efficiency and stable OSCs.

Template-Assisted Synthesis of 2D Perovskite Grating Single Crystal Films at Low Temperatures for UV Polarization-Sensitive Photodetectors.

2D perovskites have attracted tremendous attention due to their superior optoelectronic properties and potential applications in optoelectronic devices. Especially, the larger bandgap of 2D perovskite means that they are suitable for UV photodetection. However, the layered structure of 2D perovskites hinders the interlayer carrier transport, which limits the improvement of device performance. Therefore, nanoscale structures are normally used to enhance the light absorption ability, which is an effective strategy to improve the photocurrent in 2D perovskite-based photodetectors. Herein, a template-assisted low-temperature method is proposed to fabricate 2D perovskite ((C6H5C2H4NH3)2PbBr4, (PEA)2PbBr4) grating single crystal films (GSCFs). The crystallinity of the (PEA)2PbBr4 GSCFs is significantly improved due to the slow evaporation of the precursor solution under low temperatures. Based on this high crystalline quality and extremely ordered microstructures, the metal-semiconductor-metal photodetectors are assembled. Finite-different time-domain (FDTD) simulation and experiment indicate that the GSCF-based photodetectors exhibit significantly improved performance in comparison with the plane devices. The optimized 2D perovskite photodetectors are sensitive to UV light and demonstrate a responsivity and detectivity of 28.6 mA W-1 and 2.4 × 1011 Jones, respectively. Interestingly, the photocurrent of this photodetector varies as the angle of the incident polarized light, resulting in a high polarization ratio of 1.12.

Surface Microstructure Engineering in MAPbBr3 Microsheets for Performance-Enhanced Photodetectors.

Metal halide-perovskite-based photodetectors have recently emerged as a class of promising optoelectronic devices in various fields. Meanwhile, nano/microstructuring perovskite-based photodetectors are a facile integration with complementary metal-oxide semiconductors for miniaturized imaging systems. However, there are still challenges to be overcome in reducing the losses caused by light reflection on the surface of microstructural perovskites. In this work, surface microstructure engineering is employed in MAPbBr3 microsheets for reducing light reflection and improving light absorption, resulting in high-performance perovskite photodetectors. MAPbBr3 microsheets, which possess different surface morphologies of flat, upright hemisphere arrays and inverted hemisphere arrays (IHAs), are fabricated by a simple microstructure template-assisted space confinement process. The light absorption capacity of IHA MAPbBr3 is significantly higher than that of the other two structures. Hence, IHA photodetectors with excellent figures of merit, including low dark current, decent responsivity, and fast speed, are achieved. Furthermore, the noise of the IHA photodetectors is only ∼10-13 A/Hz, which results in the superior sensitivity for weak light detection with a specific detectivity up to 1011 Jones. Our results demonstrate that surface engineering is a simple, low-cost, yet effective approach to improve the performance of nano-/micro-optoelectronic devices.

Distribution pattern, molecular transmission networks, and phylodynamic of hepatitis C virus in China.

In China, few molecular epidemiological data on hepatitis C virus (HCV) are available and all previous studies were limited by small sample sizes or specific population characteristics. Here, we report characterization of the epidemic history and transmission dynamics of HCV strains in China. We included HCV sequences of individuals belonging to three HCV surveillance programs: 1) patients diagnosed with HIV infection at the Beijing HIV laboratory network, most of whom were people who inject drugs and former paid blood donors, 2) men who have sex with men, and 3) the general population. We also used publicly available HCV sequences sampled in China in our study. In total, we obtained 1,603 Ns5b and 865 C/E2 sequences from 1,811 individuals. The most common HCV strains were subtypes 1b (29.1%), 3b (25.5%) and 3a (15.1%). In transmission network analysis, factors independently associated with clustering included the region (OR: 0.37, 95% CI: 0.19-0.71), infection subtype (OR: 0.23, 95% CI: 0.1-0.52), and sampling period (OR: 0.43, 95% CI: 0.27-0.68). The history of the major HCV subtypes was complex, which coincided with some important sociomedical events in China. Of note, five of eight HCV subtype (1a, 1b, 2a, 3a, and 3b), which constituted 81.8% HCV strains genotyped in our study, showed a tendency towards decline in the effective population size during the past decade until present, which is a good omen for the goal of eliminating HCV by 2030 in China.

Auxiliary sequential deposition enables 19%-efficiency organic solar cells processed from halogen-free solvents.

High-efficiency organic solar cells are often achieved using toxic halogenated solvents and additives that are constrained in organic solar cells industry. Therefore, it is important to develop materials or processing methods that enabled highly efficient organic solar cells processed by halogen free solvents. In this paper, we report an innovative processing method named auxiliary sequential deposition that enables 19%-efficiency organic solar cells processed by halogen free solvents. Our auxiliary sequential deposition method is different from the conventional blend casting or sequential deposition methods in that it involves an additional casting of dithieno[3,2-b:2',3'-d]thiophene between the sequential depositions of the donor (D18-Cl) and acceptor (L8-BO) layers. The auxiliary sequential deposition method enables dramatic performance enhancement from 15% to over 18% compared to the blend casting and sequential deposition methods. Furthermore, by incorporating a branched-chain-engineered acceptor called L8-BO-X, device performance can be boosted to over 19% due to increased intermolecular packing, representing top-tier values for green-solvent processed organic solar cells. Comprehensive morphological and time-resolved characterizations reveal that the superior blend morphology achieved through the auxiliary sequential deposition method promotes charge generation while simultaneously suppressing charge recombination. This research underscores the potential of the auxiliary sequential deposition method for fabricating highly efficient organic solar cells using environmentally friendly solvents.

Green-Processed Non-Fullerene Organic Solar Cells Based on Y-Series Acceptors.

The development of environmentally friendly and sustainable processes for the production of high-performance organic solar cells (OSCs) has become a critical research area. Currently, Y-series electron acceptors are widely used in high-performance OSCs, achieving power conversion efficiencies above 19%. However, these acceptors have large fused conjugated backbones that are well-soluble in halogenated solvents, such as chloroform and chlorobenzene, but have poor solubility in non-halogenated green solvents. To overcome this challenge, recent studies have focused on developing green-processed OSCs that use non-chlorinated and non-aromatic solvents to dissolve bulk-heterojunction photoactive layers based on Y-series electron acceptors, enabling environmentally friendly fabrication. In this comprehensive review, an overview of recent progress in green-processed OSCs based on Y-series acceptors is provided, covering the determination of Hansen solubility parameters, the use of non-chlorinated solvents, and the dispersion of conjugated nanoparticles in water/alcohol. It is hoped that the timely review will inspire researchers to develop new ideas and approaches in this important field, ultimately leading to the practical application of OSCs.

Short-term effects of air pollution and weather changes on the occurrence of acute aortic dissection in a cold region.

Background: Air pollution and severe weather conditions can adversely affect cardiovascular disease emergencies. Nevertheless, it remains unclear whether air pollutants and low ambient temperature can trigger the occurrence of acute aortic dissection (AAD) in cold regions. Methods: We applied a retrospective analysis to assess the short-term effects of air pollution and ambient temperature on the occurrence of AAD in Harbin, China. A total of 564 AAD patients were enrolled from a major hospital in Harbin between January 1, 2017, and February 5, 2021. Weather condition data and air pollutant concentrations, including fine particulate matter smaller than 10 µm (PM10) and 2.5 µm in diameter (PM2.5), nitrogen dioxide (NO2), sulfur dioxide (SO2), carbon monoxide (CO), and ozone (O3), were collected every day. Conditional logistic regressions and correlation analysis were applied to analyze the relationship of environmental and atmospheric parameters with AAD occurrence at lags of 0 to 7 days. Specifically, we appraised the air quality index, CO, NO2, SO2, O3, PM10, PM2.5, temperature, dew point temperature, atmospheric pressure, and cloud amount. Results: A total of 1,496 days at risk were assessed, of which 564 patients developed AAD. Specifically, AAD did not occur on 1,043 (69.72%) days, while 1 or more cases occurred on 453 (30.28%) days. Several pollution and weather predictors for AAD were confirmed by multilevel modeling. The air quality index (p = 0.0012), cloud amount (p = 0.0001), and concentrations of PM2.5 (p = 0.0004), PM10 (p = 0.0013), NO2 (p = 0.0007) and O3 (p = 0.0001) predicted AAD as early as 7 days before the incident (lag of 7 days) in the study period. However, only concentrations of the air pollutants NO2 (p = 0.0468) and O3 (p = 0.011) predicted the occurrence of AAD after the COVID-19 outbreak. Similar predictive effects were observed for temperature, dew point temperature, and atmospheric pressure (all p < 0.05) on all days. Conclusion: The risk of AAD is closely related to air pollution and weather characteristics in Harbin. While causation was not determined, the impact of air pollutants on the risk of AAD was reduced after the COVID-19 outbreak.

Facile, Versatile and Stepwise Synthesis of High-Performance Oligomer Acceptors for Stable Organic Solar Cells.

Oligomer acceptors have recently emerged as promising photovoltaic materials for achieving high power conversion efficiency (PCE) and long-term stability in organic solar cells (OSCs). However, the limited availability of diverse acceptors, resulting from the sole synthetic approach, has hindered their potential for future industrialization. In this study, we present a facile and effective stepwise approach that utilizes two consecutive Stille coupling reactions for the synthesis of oligomer acceptors. To demonstrate the feasibility of the novel approach, we successfully synthesize a trimer acceptor, Tri-Y6-OD, and further systematically investigate the impact of oligomerization on device performance and stability. The results reveal that this approach has significant advantages compared to the conventional method, including reduced formation of unwanted by-products and lower difficulties in purification. Remarkably, the OSC based on PM6 : Tri-Y6-OD achieves an impressive PCE of 18.03 % and maintains 80 % of the initial PCE (T80 ) for 1523 h under illumination, surpassing the performance of the corresponding small molecule acceptor Y6-OD-based device. Furthermore, the versatility of the synthetic strategy in obtaining diverse acceptors is further demonstrated. Overall, our findings provide a facile, versatile and stepwise way for synthesizing oligomer acceptors, thereby facilitating the development of stable and efficient OSCs.

A novel internet sampling for HIV surveillance: feasibility of self-sampling and preparation of DBS for delivery detection of HIV total nucleic acid and complementarity to sentinel surveillance.

BACKGROUND: To propose a new mode of HIV test and surveillance among population of men who have sex with men (MSM): Internet-based Self-sampling at home plus Laboratory testing of HIV total nucleic acid (TNA) in dried blood spot (DBS) (ISL of DBS TNA). Feasibility of ISL of DBS TNA was studied. Characteristics of the new mode and that of conventional surveillance mode at HIV voluntary counseling and testing clinic (VCT) were compared. METHODS: A non-governmental organization (NGO) published the recruitment information on the WeChat public account. MSM filled in the questionnaire online, applied for self-sampling service package, and mailed the self made DBS to professional laboratory. The laboratory performed HIV TNA test and submitted the test results to online platform. Participants queried test results online with their unique ID. Center for Disease Control and Prevention (CDC) followed up participants with positive nucleic acid results using IDs and contact information. Rates were compared by using the Chi-Square test or Fisher's exact test. RESULTS: Four hundred twenty-three questionnaires were completed. 423 self-sampling service packages were sent out and 340 DBSs were returned to professional laboratory within one month with qualified rate of sampling as high as 95.0% (323/340). Seven samples were found to be TNA positive. Comparing ISL of DBS TNA with sentinel surveillance, it was found that there was a significant difference in the composition ratio of the two modes of surveillance population (P < 0.05). HIV prevalence of ISL of DBS as 2.17% was significantly lower than sentinel site as 8.96% (χ2 = 14.953, P = 0.000 < 0.05). CONCLUSIONS: ISL of DBS TNA proposed is feasible and has a high self-sampling qualification rate, good confidentiality. It is an effective supplement to routine sentinel surveillance and has important promotion value.

Interplanar Ferromagnetism Enhanced Ultrawide Zero Thermal Expansion in Kagome Cubic Intermetallic (Zr,Nb)Fe2.

A cubic metal exhibiting zero thermal expansion (ZTE) over a wide temperature window demonstrates significant applications in a broad range of advanced technologies but is extremely rare in nature. Here, enabled by high-temperature synthesis, we realize tunable thermal expansion via magnetic doping in the class of kagome cubic (Fd-3m) intermetallic (Zr,Nb)Fe2. A remarkably isotropic ZTE is achieved with a negligible coefficient of thermal expansion (+0.47 × 10-6 K-1) from 4 to 425 K, almost wider than most ZTE in metals available. A combined in situ magnetization, neutron powder diffraction, and hyperfine Mössbauer spectrum analysis reveals that interplanar ferromagnetic ordering contributes to a large magnetic compensation for normal lattice contraction upon cooling. Trace Fe-doping introduces extra magnetic exchange interactions that distinctly enhance the ferromagnetism and magnetic ordering temperature, thus engendering such an ultrawide ZTE. This work presents a promising ZTE in kagome metallic materials.

Host-Microbiome Interactions: Tryptophan Metabolism and Aromatic Hydrocarbon Receptors after Traumatic Brain Injury.

Traumatic brain injury refers to the damage caused to intracranial tissues by an external force acting on the head, leading to both immediate and prolonged harmful effects. Neuroinflammatory responses play a critical role in exacerbating the primary injury during the acute and chronic phases of TBI. Research has demonstrated that numerous neuroinflammatory responses are mediated through the "microbiota-gut-brain axis," which signifies the functional connection between the gut microbiota and the brain. The aryl hydrocarbon receptor (AhR) plays a vital role in facilitating communication between the host and microbiota through recognizing specific ligands produced directly or indirectly by the microbiota. Tryptophan (trp), an indispensable amino acid in animals and humans, represents one of the key endogenous ligands for AhR. The metabolites of trp have significant effects on the functioning of the central nervous system (CNS) through activating AHR signalling, thereby establishing bidirectional communication between the gut microbiota and the brain. These interactions are mediated through immune, metabolic, and neural signalling mechanisms. In this review, we emphasize the co-metabolism of tryptophan in the gut microbiota and the signalling pathway mediated by AHR following TBI. Furthermore, we discuss the impact of these mechanisms on the underlying processes involved in traumatic brain injury, while also addressing potential future targets for intervention.

Directly Cross-Linked Conjugated Polymer Donor Enables Efficient Polymer Solar Cells with Extraordinary Mechanical Robustness.

A cross-linking strategy can result in a three-dimensional network of interconnected chains for the copolymers, thereby improving their mechanical performance. In this work, a series of cross-linked conjugated copolymers, named PC2, PC5, and PC8, constructed with different ratios of monomers are designed and synthesized. For comparison, a random linear copolymer, PR2 is also synthesized based on the similar monomers. When blended with Y6 acceptor, the cross-linked polymers PC2, PC5, and PC8-based polymer solar cells (PSCs) achieve superior power conversion efficiencies (PCEs) of 17.58%, 17.02%, and 16.12%, respectively, which are higher than that (15.84%) of the random copolymer PR2-based devices. Moreover, the PCE of PC2:Y6-based flexible PSC retains ≈88% of the initial efficiency value after 2000 bending cycles, overwhelming the PR2:Y6-based device with the remaining 12.8% of the initial PCE. These results demonstrate that the cross-linking strategy is a feasible and facile approach to developing high-performance polymer donors for the fabrication of flexible PSCs.

Longitudinal Through-Hole Architecture for Efficient and Thickness-Insensitive Semitransparent Organic Solar Cells.

Semi-transparent organic solar cells (ST-OSCs) have great potential for application in vehicle- or building-integrated solar energy harvesting. Ultrathin active layers and electrodes are typically utilized to guarantee high power conversion efficiency (PCE) and high average visible transmittance (AVT) simultaneously; however, such ultrathin parts are unsuitable for industrial high-throughput manufacturing. In this study, ST-OSCs are fabricated using a longitudinal through-hole architecture to achieve functional region division and to eliminate the dependence on ultrathin films. A complete circuit that vertically corresponds to the silver grid is responsible for obtaining high PCE, and the longitudinal through-holes embedded in it allow most of the light to pass through,where the overall transparency is associated with the through-hole specification rather than the thicknesses of active layer and electrode. Excellent photovoltaic performance over a wide range of transparency (9.80-60.03%), with PCEs ranging from 6.04% to 15.34% is achieved. More critically, this architecture allows printable 300-nm-thick devices to achieve a record-breaking light utilization efficiency (LUE) of 3.25%, and enables flexible ST-OSCs to exhibit better flexural endurance by dispersing the extrusion stress into the through-holes. This study paves the way for fabricating high-performance ST-OSCs and shows great promise for the commercialization of organic photovoltaics.