Chemical Plasma Membrane Perforation Generated by a Microfluidic Probe for Single-Cell Intracellular Protein Delivery.

Efficient and convenient delivery of exogenous molecules into cells is important for cell biology research. However, many intracellular delivery methods require carrier-mediated or physical field assistance, complicating the delivery process. Here, a general, simple, and effective method for in situ single-cell intracellular delivery is reported. A solution containing digitonin and cargo is precisely applied to single cells using a microfluidic probe. Digitonin binds to cholesterol in the plasma membrane to induce perforation, and the cargo enters the cell through the pore. By optimizing parameters, propidium iodide (0.67 kDa) and FITC-dextran (10, 40, and 150 kDa) can be successfully introduced into single cells within 3 min while maintaining cell viability. To prove the potential of this method for cell research, we delivered cytochrome C (13 kDa) and cyclophilin A (18 kDa) into cells by this method. The delivered cytochrome C successfully induces cell apoptosis by activating the caspase pathway, and cyclophilin A performs an antioxidant effect in the cells, which may enhance the drug resistance of glioma cells. It is believed that this method will be an attractive tool for single-cell intracellular delivery.

Functionalized sampling swabs array-based portable ATP bioluminescence sensor with on-site enrichment and high specificity for live Salmonella detection.

Live food-borne pathogens, featured with rapid proliferative capacity and high pathogenicity, pose an emerging food safety and public health crisis. The high-sensitivity detection of pathogens is particularly imperative yet remains challenging. This work developed a functionalized nylon swab array with enhanced affinity for Salmonella typhimurium (S.T.) for high-specificity ATP bioluminescence-based S.T. detection. In brief, the nylon swabs (NyS) were turned to N-methylation nylon (NyS-OH) by reacting with formaldehyde, and NyS-OH were further converted to NyS-CA by reacting with carboxylic groups of citric acid (CA) and EDC/NHS solution, for altering the NyS surface energy to favor biomodification. The antibody-immobilized nylon swab (MNyS-Ab) was ready for S.T.-specific adsorption. Three prepared MNyS-Ab were installed on a stirrer to form an MNyS-Ab array, allowing for on-site enrichment of S.T. through absorptive extraction. The enriched S.T. was quantified by measuring the bioluminescence of ATP released from cell lysis utilizing a portable ATP bioluminescence sensor. The bioassay demonstrated a detectable range of 102-107 CFU mL-1 with a detection limit (LOD) of 8 CFU/mL within 35 min. The signal of single MNyS-Ab swabs was 500 times stronger than the direct detection of 106 CFU/mL S.T. The MNyS-Ab array exhibited a 100-fold increase in extraction level compared to a single MNyS. This combination of a portable bioluminescent sensor and modified nylon swab array offers a novel strategy for point-of-care testing of live S.T. strains. It holds promise for high-sensitivity measurements of other pathogens and viruses.

The nitrogen-dependent GABA pathway of tomato provides resistance to a globally invasive fruit fly.

Introduction: The primary metabolism of plants, which is mediated by nitrogen, is closely related to the defense response to insect herbivores. Methods: An experimental system was established to examine how nitrogen mediated tomato resistance to an insect herbivore, the oriental fruit fly (Bactrocera dorsalis). All tomatoes were randomly assigned to the suitable nitrogen (control, CK) treatment, nitrogen excess (NE) treatment and nitrogen deficiency (ND) treatment. Results: We found that nitrogen excess significantly increased the aboveground biomass of tomato and increased the pupal biomass of B. dorsalis. Metabolome analysis showed that nitrogen excess promoted the biosynthesis of amino acids in healthy fruits, including γ-aminobutyric acid (GABA), arginine and asparagine. GABA was not a differential metabolite induced by injury by B. dorsalis under nitrogen excess, but it was significantly induced in infested fruits at appropriate nitrogen levels. GABA supplementation not only increased the aboveground biomass of plants but also improved the defensive response of tomato. Discussion: The biosynthesis of GABA in tomato is a resistance response to feeding by B. dorsalis in appropriate nitrogen, whereas nitrogen excess facilitates the pupal weight of B. dorsalis by inhibiting synthesis of the GABA pathway. This study concluded that excess nitrogen inhibits tomato defenses in plant-insect interactions by inhibiting GABA synthesis, answering some unresolved questions about the nitrogen-dependent GABA resistance pathway to herbivores.

Discovery of a new highly pathogenic toxin involved in insect sepsis.

IMPORTANCE: As a current biocontrol resource, entomopathogenic nematodes and their symbiotic bacterium can produce many toxin factors to trigger insect sepsis, having the potential to promote sustainable pest management. In this study, we found Steinernema feltiae and Xenorhabdus bovienii were highly virulent against the insects. After infective juvenile injection, Galleria mellonella quickly turned black and softened with increasing esterase activity. Simultaneously, X. bovienii attacked hemocytes and released toxic components, resulting in extensive hemolysis and sepsis. Then, we applied high-resolution mass spectrometry-based metabolomics and found multiple substances were upregulated in the host hemolymph. We found extremely hazardous actinomycin D produced via 3-hydroxyanthranilic acid metabolites. Moreover, a combined transcriptomic analysis revealed that gene expression of proteins associated with actinomycin D was upregulated. Our research revealed actinomycin D might be responsible for the infestation activity of X. bovienii, indicating a new direction for exploring the sepsis mechanism and developing novel biotic pesticides.

Biomechanical effect of increased number of suture strands on rotator cuff repair in a bovine model.

OBJECTIVE: This study aimed to investigate if there was a link between the biomechanical properties and the number of suture strands in repairing a rotator cuff (RC) tear in a bovine model using the transosseous technique. METHODS: Fifty-four fresh tendons from bovine (mean age: 7.1 ± 0.5 months; range 6.5-7.5 months) and 1 humeral head from porcine (8.5 months) were used in this study. All the specimens had no apparent abnormalities. Using the transosseous structure, the RC tendon was detached from the greater tuberosity and randomly assigned to 3-strand, 4-strand, 5-strand, and 6-strand groups, with the glenohumeral abducted at 0° and 90°. Biomechanical tests were conducted to compare the groups' differences in the failure mode, pull-toextension load in the 1-, 2-, and 3-mm formations, and the maximum load. The analysis of variance test was performed to compare the results. Statistical significance was set at P < .05. RESULTS: No significant difference was observed among the groups concerning the tendon characteristics (all P ≥ .05). At 90° shoulder abduction, a significant difference was detected in the load between 3- and 5-strand groups for 1-mm gap formation (P=.049). No statistical differences were noted in the load at the gap displacements in the 1-, 2-, and 3-mm formations at 0° and 90° shoulder abduction (all P > .05). The maximum failure load and extension in maximal tension increased with the number of sutures. CONCLUSION: The maximum load and ultimate extension increase with the number of sutures at both positions. The number of sutures was not an influencing factor of gap formation. Regarding the tear size and tension of the RC, choosing the appropriate number of strands individually instead of excessively increasing the number of sutures is advocated for RC repair.

Microfracture Lateral to the Greater Tuberosity of the Humerus Enhances Tendon-to-Bone Healing in a Rat Rotator Cuff Model.

BACKGROUND: Microfracture at the rotator cuff insertion is an established surgical marrow-stimulation technique for enhancing rotator cuff healing. However, the effect of lateralized or medialized microfracture on the insertion is unknown. PURPOSE: To compare the biomechanical and histologic effects of microfracture at 3 different regions for rotator cuff repair in a rat model. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 72 Sprague-Dawley rats with bilateral supraspinatus tendon insertion detachment were allocated into 4 groups with 4 different interventions: no microfracture at the humeral head as a control group (Con), traditional microfracture at the footprint area (MFA), and medialized microfracture to the footprint area (MMFA) on the articular surface of the humerus or lateralized microfracture to the footprint area at the greater tuberosity (LMFA). All underwent immediate repair. Tendon-to-bone healing was assessed by biomechanical and histologic tests 4 and 8 weeks postoperation. RESULTS: At 4 weeks, the LMFA group showed a significantly superior failure load compared with the other groups (all P < .05). The LMFA and MFA groups showed significantly superior stiffness compared with the Con and MMFA groups (all P < .01). At 8 weeks, superior failure load and stiffness were observed in the LMFA group compared with the control group (all P < .05). Histologic examination revealed that the LMFA group had superior collagen composition and tendon-to-bone maturation at the interface at 4 and 8 weeks compared with the Con group (all P < .05). CONCLUSION: Lateralized microfracture at the greater tuberosity improved the histologic quality of repair tissue and biomechanical strength at the tendon-to-bone insertion after rotator cuff repair in a rat model. CLINICAL RELEVANCE: Microfracture lateral to the footprint area might be a better way to enhance rotator cuff healing clinically.

Multicompartmental Hydrogel Microspheres as a Tool for Multicomponent Analysis.

Developing advanced tools for multicomponent analysis is an open challenge in engineering and life science. Herein, multicompartmental hydrogel microspheres with multi-material compatibility and structural scalability are developed as a tool for multicomponent analysis at a single-particle level. Microfluidic technology endows particles with adjustable sizes and super-segmented layouts that can be used to load various analyte probes. In order to perform multicomponent analysis, these microspheres are structurally divided into identifier regions for indicating reading direction and analyte regions for detecting target molecules. The multiplex detection ability of these particles is demonstrated in microRNA bioassays with high specificity and sensitivity. The multi-target analysis is performed on a single-particle level, and the bioassay is free of conventional labeling interference. We expect these particles to reach their potential in clinical diagnostics.

Multidimensional controllable fabrication of tumor spheroids based on a microfluidic device.

Multicellular tumor spheroids (MCTSs) are in vitro solid tumor models with physiological relevance. To achieve robust process control, a MCTS fabrication method that combines cell membrane engineering and droplet microfluidic techniques is designed. The fluidic control and the chemical interactions between biotin and streptavidin enable artificial cell aggregation to be accomplished in seconds. Then, spheroids with a uniform size are fabricated within alginate microcapsules. Microfluidic mixing-based cell aggregation regulates the cell aggregate size and the spheroid composition, and the microcapsules regulate the size of spheroids from 120 to 180 µm. The method shows applicability for various cancer cell lines, including HCT116, HepG2, and A549. In addition, composite colon cancer spheroids consisting of HCT116 and NIH3T3 with predetermined cell ratios and uniform distributions are produced. The generated MCTSs are assessed using the ELISA and UPLC-MS/MS techniques. The release of vascular endothelial growth factor (VEGF) and the 5-fluorouracil (5-FU) resistance differ in the monotypic and cocultured colon cancer models. Our method provides a robust way to produce consistent and customized MCTSs in cancer research and drug screening.

Comprehensive investigating of MMR gene in hepatocellular carcinoma with chronic hepatitis B virus infection in Han Chinese population.

Hepatocellular carcinoma associated with chronic hepatitis B virus infection seriously affects human health. Present studies suggest that genetic susceptibility plays an important role in the mechanism of cancer development. Therefore, this study focused on single nucleotide polymorphisms (SNPs) of MMR genes associated with HBV-HCC. Five groups of participants were included in this study, which were healthy control group (HC), spontaneous clearance (SC), chronic hepatitis B group (CHB), HBV-related liver cirrhosis group (LC) and HBV-related hepatocellular carcinoma group (HBV-HCC). A total of 3128 participants met the inclusion and exclusion criteria for this study. 20 polymorphic loci on MSH2, MSH3 and MSH6 were selected for genotyping. There were four case-control studies, which were HC vs. HCC, SC vs. HCC, CHB vs. HCC and LC vs. HCC. We used Hardy-Weinberg equilibrium test, unconditional logistic regression, haplotype analysis, and gene-gene interaction for genetic analysis. Ultimately, after excluding confounding factors such as age, gender, smoking and drinking, 12 polymorphisms were found to be associated with genetic susceptibility to HCC. Haplotype analysis showed the risk haplotype GTTT (rs1805355_G, rs3776968_T, rs1428030_C, rs181747_C) was more frequent in the HCC group compared with the HC group. The GMDR analysis showed that the best interaction model was the three-factor model of MSH2-rs1981928, MSH3-rs26779 and MSH6-rs2348244 in SC vs. HCC group (P=0.001). In addition, we found multiplicative or additive interactions between genes in our selected SNPs. These findings provide new ideas to further explore the etiology and pathogenesis of HCC. We have attempted to explain the molecular mechanisms by which certain SNPs (MSH2-rs4952887, MSH3-rs26779, MSH3-rs181747 and MSH3-rs32950) affect genetic susceptibility to HCC from the perspectives of eQTL, TFBS, cell cycle and so on. We also explained the results of haplotypes and gene-gene interactions. These findings provide new ideas to further explore the etiology and pathogenesis of HCC.

Cancellous bone should not be exposed during medialized rotator cuff repair based on bone-to-tendon healing in a rat mode.

PURPOSE: To compare the biological bone-to-tendon healing using three different medialized bone bed preparation techniques (i.e. cortical bone exposure, cancellous bone exposure, and no cartilage removal) in a rat model of medialized rotator cuff repair. METHODS: Twenty-one male Sprague-Dawley rats with 42 shoulders were subjected to bilateral supraspinatus tenotomy from the greater tuberosity. The rotator cuff was repaired using medialized anchoring with the cortical bone exposed, the cancellous bone exposed, or no cartilage removed. Four and three rats in each group were killed for biomechanical testing and histological evaluation, respectively, at postoperative 6 weeks. RESULTS: All rats survived until the end of the study, but one infected shoulder in the cancellous bone exposure group was excluded from further analysis. Compared with the cortical bone exposure and no cartilage removal groups, the rotator cuff healing of the cancellous bone exposure group showed significantly lower maximum load (cancellous bone exposure group: 26.2 ± 2.3 N, cortical bone exposure group: 37.6 ± 7.9 N, no cartilage removal group: 34.6 ± 7.2 N, P = 0.005 and 0.029) and less stiffness (cancellous bone exposure group: 10.5 ± 2.4 N/mm, cortical bone exposure group: 17.4 ± 6.7 N, no cartilage removal group: 16.0 ± 3.9 N, P = 0.015 and 0.050) at postoperative 6 weeks. In all three groups, the repaired supraspinatus tendon healed towards the original insertion rather than the medialized insertion. The cancellous bone exposure group showed inferior fibrocartilage formation and insertion healing. CONCLUSIONS: The medialized bone-to-tendon repair strategy does not guarantee complete histological healing, and the removal of excessive bony structure impairs bone-to-tendon healing. This study concludes that surgeons should not expose the cancellous bone during the medialized rotator cuff repair.

Salivary carbonic anhydrase II in winged aphid morph facilitates plant infection by viruses.

Aphids are the most common insect vector transmitting hundreds of plant viruses. Aphid wing dimorphism (winged vs. wingless) not only showcases the phenotypic plasticity but also impacts virus transmission; however, the superiority of winged aphids in virus transmission over the wingless morph is not well understood. Here, we show that plant viruses were efficiently transmitted and highly infectious when associated with the winged morph of Myzus persicae and that a salivary protein contributed to this difference. The carbonic anhydrase II (CA-II) gene was identified by RNA-seq of salivary glands to have higher expression in the winged morph. Aphids secreted CA-II into the apoplastic region of plant cells, leading to elevated accumulation of H+. Apoplastic acidification further increased the activities of polygalacturonases, the cell wall homogalacturonan (HG)-modifying enzymes, promoting degradation of demethylesterified HGs. In response to apoplastic acidification, plants accelerated vesicle trafficking to enhance pectin transport and strengthen the cell wall, which also facilitated virus translocation from the endomembrane system to the apoplast. Secretion of a higher quantity of salivary CA-II by winged aphids promoted intercellular vesicle transport in the plant. The higher vesicle trafficking induced by winged aphids enhanced dispersal of virus particles from infected cells to neighboring cells, thus resulting in higher virus infection in plants relative to the wingless morph. These findings imply that the difference in the expression of salivary CA-II between winged and wingless morphs is correlated with the vector role of aphids during the posttransmission infection process, which influences the outcome of plant endurance of virus infection.

A novel gene REPTOR2 activates the autophagic degradation of wing disc in pea aphid.

Wing dimorphism in insects is an evolutionarily adaptive trait to maximize insect fitness under various environments, by which the population could be balanced between dispersing and reproduction. Most studies concern the regulatory mechanisms underlying the stimulation of wing morph in aphids, but relatively little research addresses the molecular basis of wing loss. Here, we found that, while developing normally in winged-destined pea aphids, the wing disc in wingless-destined aphids degenerated 30-hr postbirth and that this degeneration was due to autophagy rather than apoptosis. Activation of autophagy in first instar nymphs reduced the proportion of winged aphids, and suppression of autophagy increased the proportion. REPTOR2, associated with TOR signaling pathway, was identified by RNA-seq as a differentially expressed gene between the two morphs with higher expression in the thorax of wingless-destined aphids. Further genetic analysis indicated that REPTOR2 could be a novel gene derived from a gene duplication event that occurred exclusively in pea aphids on autosome A1 but translocated to the sex chromosome. Knockdown of REPTOR2 reduced autophagy in the wing disc and increased the proportion of winged aphids. In agreement with REPTOR's canonical negative regulatory role of TOR on autophagy, winged-destined aphids had higher TOR expression in the wing disc. Suppression of TOR activated autophagy of the wing disc and decreased the proportion of winged aphids, and vice versa. Co-suppression of TOR and REPTOR2 showed that dsREPTOR2 could mask the positive effect of dsTOR on autophagy, suggesting that REPTOR2 acted as a key regulator downstream of TOR in the signaling pathway. These results revealed that the TOR signaling pathway suppressed autophagic degradation of the wing disc in pea aphids by negatively regulating the expression of REPTOR2.

Research and Application of Energy-Efficient Management Approach for Wireless Sensor Networks.

Wireless sensor networks (WSNs) are widely used in industrial applications. However, many of them have limited lifetimes, which has been a considerable constraint on their widespread use. As a typical application of WSNs, distributed measurement of the electric field under high-voltage direct-current (HVDC) transmission lines also suffers from this issue. This paper first introduces the composition of the electric-field measurement system (EFMS) and its working principle. Considering the actual power supply of the system, this paper mainly introduces the composition of the wireless sensor node (WSND) and analyzes the power consumption and potential working state transformation of the WSND, together with a comprehensive study on parameters affecting the power consumption of the wireless communication unit. Moreover, an energy-efficient scheduling approach is proposed after specially designing a working sequence and the study on system parameters. The proposed approach is verified by experiments on not only the experimental line of the national HVDC test base, but also a commercial operation HVDC transmission line with the challenge of long endurance, which is considered in this paper with a new strategy. The results show that the proposed method can greatly extend the lifetime of the WSND.

Early Postoperative MRI Evaluation of a Fascia Lata Autograft With and Without Polypropylene Mesh Augmentation After Superior Capsular Reconstruction.

BACKGROUND: Recently, a polypropylene mesh has been introduced and reported to improve clinical outcomes after superior capsular reconstruction (SCR) using a fascia lata autograft (FLA). However, mesh-related events such as a foreign body response may trigger inflammation, which might affect graft healing and remodeling. PURPOSE/HYPOTHESIS: The aim was to investigate whether the healing and remodeling of an FLA were affected by the use of a mesh by comparing the signal intensity of an FLA-alone group vs an FLA + Mesh group on postoperative magnetic resonance imaging (MRI). The hypothesis was that the use of a mesh would decrease the MRI signal intensity of FLA during the early postoperative phase. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: Patients who had undergone SCR using an FLA with or without a mesh between March 2013 and August 2021 were retrospectively analyzed. Follow-up MRI was performed at 3 months. A total of 78 patients (24 in the FLA group and 54 in the FLA + Mesh group) with intact grafts were included. Graft remodeling was evaluated by analyzing the signal-to-noise quotient (SNQ) at the humeral, mid-substance, and glenoid sites. Theoretically, lower SNQ ratios indicate higher strength and better healing of the graft. RESULTS: The mean SNQ was 30.603 (range, 11.790-72.710) in the FLA group and 18.367 (range, 4.464-69.500) in the FLA + Mesh group (P < .001). Furthermore, significant differences were found between the 2 groups at the humeral and mid-substance sites (37.863 [range, 5.092-81.187] vs 15.512 [range, 1.814-80.869], P < .001; and 29.168 [range, 6.103-73.900] vs 16.878 [range, 2.454-92.416], P = .003; respectively). However, there was no difference between the 2 groups at the glenoid site (25.346 [range, 7.565-86.353] vs 20.354 [range, 3.732-88.468], P = .057). CONCLUSION: At the 3-month follow-up, the FLA + Mesh group showed a lower MRI signal intensity than the FLA group. The healing and remodeling of an FLA may be enhanced when a mesh is used.

Comprehensive investigating of mismatch repair genes (MMR) polymorphisms in participants with chronic hepatitis B virus infection.

Background and aim: In this study, we focused on the relationship between single nucleotide polymorphisms in MMR genes and the occurrence and development of HBV infection. Materials and methods: A total of 3,128 participants were divided into five groups: negative control group (NeC), spontaneous clearance group (SC), chronic hepatitis B group (CHB), liver cirrhosis group (LC) and hepatocellular carcinoma group (HCC), CHB, liver cirrhosis and hepatocellular carcinoma constitute HLD. We conducted three case-control studies: NeC (840 cases) vs. HLD (1792 cases), SC (486 cases) vs. HLD (1792 cases) and CHB + LC (1,371 cases) vs. HCC (421 cases). 11 polymorphic loci in MLH1, MLH3, MSH5, PMS1 and PMS2 were involved in genotyping by Sequenom MassArray. The SNPStats performed Hardy-Weinberg equilibrium test. Linkage disequilibrium patterns were visualized using Haploview4.2. The GMDR (v0.9) was conducted to generalized multifactor dimension reduction analysis. The correlation, multiplicative interaction and additive interaction analyses were calculated by Logistic Regression through SPSS21.0. Matrix and programmed excel were also involved in the calculation of additive interaction. Results: In NeC vs. HLD group, MSH5-rs1150793(G) was a risk base to HBV susceptibility (nominal p = 0.002, OR = 1.346). We found multiplicative interaction between MLH1-rs1540354 (AA + AT) and PMS1-rs1233255 (AA) (nominal p = 0.024, OR = 1.240). There was additive interaction between PMS1-rs1233255 (AA) and PMS1-rs256554(CA + CC). In SC vs. HLD group, MLH1-rs1540354 (TT) was a risk genotype (nominal p < 0.05, OR>1). Through haplotype analysis, we found the linkage disequilibrium of three loci in MLH1. The results of GMDR showed the optimal five-locus model about the spontaneous clearance of HBV. In CHB + LC vs. HCC group, PMS2-rs12112229(A) was related to the cancerization of liver. Conclusion: We found rs1150793(G), rs1540354(T) and rs12112229(A) were significantly related to HBV susceptibility, spontaneous clearance of HBV and cancerization after infection, respectively.

Anatomical and Interpositional Bursa Preservation Showed Similar Improved Tendon to Bone Healing Compared With the Bursa Removal in a Rat Rotator Cuff Tear Model.

PURPOSE: To compare the effects of anatomical preservation (AP) and interpositional preservation (IP) of subacromial bursa tissue on tendon-to-bone healing in a rat model of rotator cuff tear. METHODS: In this study, 48 male Sprague-Dawley rats (average weight 283 g) underwent bilateral supraspinatus tendons severed by sharp incision and repaired immediately. The subacromial bursa tissues were completely removed in 16 rats, who served as the control (CON) group. The other 32 rats were randomly divided into 2 groups AP and IP between tendon and bone. Eight rats of each group were sacrificed for bilateral shoulders at 3 and 9 weeks after the operation, including 5 rats for biomechanical tests and 3 for histologic analysis. RESULTS: No significant differences in terms of biomechanical properties were observed among the groups 3 weeks after surgery. At 9 weeks, the maximum load and stiffness of the AP (32.95 ± 6.33 N, P = .029; 12.49 ± 3.17 N/mm, P < .001; respectively) and IP (33.58 ± 8.47 N, P = .015; 11.63 ± 2.84 N/mm, P = .010, respectively) groups were significantly superior to that of the CON group (26.59 ± 4.47 N; 8.42 ± 2.33 N/mm, respectively). More organized collagen and more mature tendon insertion were observed in AP and IP groups at the interface at 9 weeks, which means better tendon-to-bone healing compared with the CON group. CONCLUSIONS: The subacromial bursa plays a positive role in tendon-bone healing. Either anatomical preservation or interpositional preservation between tendon and bone can similarly facilitate the process of healing. CLINICAL RELEVANCE: Considering the additional surgical time and surgical manipulation, preserving the subacromial bursa at the anatomical position seems to be a better way to promote rotator cuff healing.

Absorbable suture knots on the supraspinatus tendon prevent adverse effects of nonabsorbable suture knots in a rat model.

PURPOSE: To compare the absorbable and nonabsorbable suture knots on the tendon on bone-to-tendon healing during the early phase in a rat rotator cuff tear (RCT) model. METHODS: Fifty-two male Sprague-Dawley rats (10 weeks old; mean weight, 380 g) were used in this study, and 51 of them were randomly assigned into three groups: absorbable suture group (ASG, n = 22), nonabsorbable suture group (NSG, n = 22), and sham surgery group (SSG, n = 7), and the remaining rat was used to take surgical pictures. Bilateral supraspinatus tendon tears were created and repaired immediately in ASG and NSG. Three rats from ASG and NSG were killed for Western blot and histological evaluation at 3 days, 1 week, and 4 weeks after surgery. At 4 weeks, four rats from each group were killed for biomechanical test, and three rats from SSG were used for histological evaluation. RESULTS: Absorbable suture knots on the tendon completely degraded at 4 weeks. However, nonabsorbable suture knots remained intact between the tendon and articular side. ASG showed a stronger inflammatory reaction at 3 days and 1 week, but a weaker reaction at 4 weeks as confirmed by gross observation and Western blot. Besides, ASG showed superior biomechanical properties in terms of maximum load to failure and stiffness at 4 weeks. Modified Bonar score revealed superior maturity for tissue healing in ASG to that in NSG at 4 weeks. Furthermore, inferior bone-to-tendon interface and weakest link formation were observed in NSG on histologic images. CONCLUSION: Absorbable suture knots on the tendon contributed to better mechanical properties compared with the nonabsorbable one after rotator cuff repair.

Functional evaluation of the insulin/insulin-like growth factor signaling pathway in determination of wing polyphenism in pea aphid.

Wing polyphenism is a common phenomenon that plays key roles in environmental adaptation of insects. Insulin/insulin-like growth factor signaling (IIS) pathway is a highly conserved pathway in regulation of metabolism, development, and growth in metazoans. It has been reported that IIS is required for switching of wing morph in brown planthopper via regulating the development of the wing pad. However, it remains elusive whether and how IIS pathway regulates transgenerational wing dimorphism in aphid. In this study, we found that pairing and solitary treatments can induce pea aphids to produce high and low percentage winged offspring, respectively. The expression level of ILP5 (insulin-like peptide 5) in maternal head was significantly higher upon solitary treatment in comparison with pairing, while silencing of ILP5 caused no obvious change in the winged offspring ratio. RNA interference-mediated knockdown of FoxO (Forkhead transcription factor subgroup O) in stage 20 embryos significantly increased the winged offspring ratio. The results of pharmacological and quantitative polymerase chain reaction experiments showed that the embryonic insulin receptors may not be involved in wing polyphenism. Additionally, ILP4 and ILP11 exhibited higher expression levels in 1st wingless offspring than in winged offspring. We demonstrate that FoxO negatively regulates the wing morph development in embryos. ILPs may regulate aphid wing polyphenism in a developmental stage-specific manner. However, the regulation may be not mediated by the canonical IIS pathway. The findings advance our understanding of IIS pathway in insect transgenerational wing polyphenism.

Highly sensitive detection of polyborosiloxane (PBS) hydrolysis with mannitol using electrochemical methodology.

The complexation of polyhydric alcohols, such as mannitol, with boric acid ion promotes the ionization of boric acid. The hydrolysis performance of PBSs was determined using an electrochemical approach for the first time. Compared with the traditional methods, this approach includes the advantages of high sensitivity, continuity, and digitization.

Length Changes in the Interosseous Membrane During Forearm Rotation: A 3-Dimensional Study In Vivo.

PURPOSE: The length change of the interosseous membrane (IOM) during forearm rotation has not been fully studied. To explore the meaning of length change in the distal oblique band (DOB), the distal accessory band (DAB), and the proximal, middle, and distal parts of the central band (CBP, CBM, and CBD, respectively), we investigated the length change in these ligaments at maximum pronation, 45° of pronation, neutral position, 45° of supination, and maximum supination in vivo. METHODS: The images of the right forearms from 6 healthy volunteers were obtained by computed tomography scanning at the 5 above-mentioned rotation positions. We created 3-dimensional models of the radius and ulna, DOB, DAB, and central band based on the points of origin and insertion. Finally, the length of each ligament was estimated from the points of insertions and origins registered on the 3-dimensional models. RESULTS: The DAB and CBD lengths increased significantly from maximum pronation to 45° of pronation. The DOB length increased significantly from 45° of pronation to neutral position and decreased significantly from 45° of supination to maximum supination. The DAB and CBM lengths increased significantly from neutral position to 45° of supination. The DAB length decreased significantly from 45° of supination to maximum supination. For the CBP, no difference in length was observed during forearm rotation. CONCLUSIONS: The DOB becomes taut at neutral position, and the central band, especially the CBP, is nearly isometric. The findings indicate that the DOB may provide the primary stabilization of the distal radioulnar joint and that the central band is the key stabilizer during forearm rotation. CLINICAL RELEVANCE: Surgeons may pay attention to the DOB when a patient incurs a distal radioulnar joint injury, and the CBP may be the optimal location for IOM reconstruction.