Inactivation of various variant types of SARS-CoV-2 by indoor-light-sensitive TiO2-based photocatalyst.

Photocatalysts are promising materials for solid-state antiviral coatings to protect against the spread of pandemic coronavirus disease (COVID-19). This paper reports that copper oxide nanoclusters grafted with titanium dioxide (CuxO/TiO2) inactivated the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus, including its Delta variant, even under dark condition, and further inactivated it under illumination with a white fluorescent bulb. To investigate its inactivation mechanism, the denaturation of spike proteins of SARS-CoV-2 was examined by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) and enzyme-linked immunosorbent assay (ELISA). In addition to spike proteins, fragmentation of ribonucleic acids in SARS-CoV-2 was investigated by real-time reverse transcription quantitative polymerase chain reaction (RT-qPCR). As a result, both spike proteins and RNAs in the SARS-CoV-2 virus were damaged by the CuxO/TiO2 photocatalyst even under dark condition and were further damaged under white fluorescent bulb illumination. Based on the present antiviral mechanism, the CuxO/TiO2 photocatalyst will be effective in inactivating other potential mutant strains of SARS-CoV-2. The CuxO/TiO2 photocatalyst can thus be used to reduce the infectious risk of COVID-19 in an indoor environment, where light illumination is turned on during the day and off during the night.

Preparation of cerium molybdates and their antiviral activity against bacteriophage Φ6 and SARS-CoV-2.

Two cerium molybdates (Ce2Mo3O12 and γ-Ce2Mo3O13) were prepared using either polymerizable complex method or hydrothermal process. The obtained powders were almost single-phase with different cerium valence. Both samples were found to have antiviral activity against bacteriophage Φ6. Especially, γ-Ce2Mo3O13 exhibited high antiviral activity against both bacteriophage Φ6 and SARS-CoV-2 coronavirus, which causes COVID-19. A synergetic effect of Ce and molybdate ion was inferred along with the specific surface area as key factors for antiviral activity.

Effects of cerium and tungsten substitution on antiviral and antibacterial properties of lanthanum molybdate.

Powders of cerium (Ce)-substituted and tungsten (W)-substituted La2Mo2O9 (LMO) were prepared using polymerizable complex method. Their antiviral and antibacterial performances were then evaluated using bacteriophage Qß, bacteriophage Φ6, Escherichia coli, and Staphylococcus aureus. The obtained powders, which were almost single-phase, exhibited both antiviral and antibacterial properties. Effects of dissolved ions on their antiviral activity against bacteriophage Qß were remarkable. A certain contribution of direct contact to the powder surface was also inferred along with the dissolved ion effect for antiviral activity against bacteriophage Φ6. Dissolved ion effects and pH values suggest that both Mo and W are in the form of polyacids. Antiviral activity against bacteriophage Φ6 was improved by substituting Ce for La in LMO. Similarly to LMO, Ce-substituted LMO exhibited hydrophobicity. Inactivation of alkaline phosphatase enzyme proteins was inferred as one mechanism of the antiviral and antibacterial activities of the obtained powders.

Preparation of hydrophobic La2Mo2O9 ceramics with antibacterial and antiviral properties.

After powder of La2Mo2O9 (LMO) was prepared using complex polymerization, dense sintered bodies (96% relative density) of LMO were obtained from the powder through pressureless sintering in a synthesized air atmosphere. The water contact angle of the LMO ceramics increased gradually during storage in ambient air. It reached 93.6 ± 3.0° in 624 h. Results of XPS analysis and ozone treatment suggest that organic substances in ambient air adsorbed onto the LMO surface during storage. Measurements of antibacterial (Escherichia coli and Staphylococcus aureus) and antiviral (bacteriophage Qß and bacteriophage Φ6) activities of LMO revealed that their survival rates decreased more than 99.9% within 6 h. Based on results obtained using dissolved ion contact method and from comparison of the antibacterial and antiviral activities with La2O3 and MoO3, one can infer that the synergistic effect of La2O3 and MoO3 plays an important role in the high antibacterial and antiviral activity of LMO.

Comparison of the antiviral effect of solid-state copper and silver compounds.

Antiviral activities of insoluble solid-state and soluble ionic copper and silver compounds were evaluated against influenza A virus (A/PR8/H1N1) possessing a viral envelope and bacteriophage Qß lacking an envelope. The viral solutions were exposed on glass samples uniformly loaded with copper and silver compounds. Exposure to solid-state cuprous oxide (Cu2O) efficiently inactivated both influenza A virus and bacteriophage Qß, whereas solid-state cupric oxide (CuO) and silver sulfide (Ag2S) showed little antiviral activity. Copper ions from copper chloride (CuCl2) had little effect on the activity of bacteriophage Qß in spite of the fact that copper ions strongly inactivate influenza A in previous studies. Silver ions from silver nitrate (AgNO3) and silver(I) oxide (Ag2O) in solution showed strong inactivation of influenza A and weak inactivation of bacteriophage Qß. We also investigated the influence of the compounds on the function of two influenza viral proteins, hemagglutinin and neuraminidase. Silver ions from AgNO3 and Ag2O remarkably decreased enzymatic activity of neuraminidase through the breakage of disulfide (SS) bonds, corresponding to the selective inactivation of influenza A virus. By contrast, exposure to Cu2O markedly reduced the activity of hemagglutinin rather than neuraminidase. These findings suggest that solid-state Cu2O disrupts host cell recognition by denaturing protein structures on viral surfaces, leading to the inactivation of viruses regardless of the presence of a viral envelope.

Visible-Light-Sensitive Photocatalysts: Nanocluster-Grafted Titanium Dioxide for Indoor Environmental Remediation.

Photocatalytic degradation of organic compounds requires photoexcited holes with strong oxidative power in the valence band (VB) of semiconductors. Although numerous types of doped semiconductors, such as nitrogen-doped TiO2, have been studied as visible-light-sensitive photocatalysts, the quantum yields of these materials were very low because of the limited oxidation power of holes in the nitrogen level above the VB. Recently, we developed visible-light-sensitive Cu(II) and Fe(III) nanocluster-grafted TiO2 using a facile impregnation method and demonstrated that visible-light absorption occurs at the interface between the nanoclusters and TiO2, as electrons in the VB of TiO2 are excited to the nanoclusters under visible-light irradiation. In addition, photogenerated holes in the VB of TiO2 efficiently oxidize organic contaminants, and the excited electrons that accumulate in nanoclusters facilitate the multielectron reduction of oxygen. Notably, Cu(II) and Fe(III) nanocluster-grafted TiO2 photocatalyst has the highest quantum yield among reported photocatalysts and has antiviral, self-cleaning, and air purification properties under illumination by indoor light fixtures equipped with white fluorescent bulbs or white light-emitting diodes.

Photocatalytic activity of Cu2+/TiO2-coated cordierite foam inactivates bacteriophages and Legionella pneumophila.

We investigated the antiviral activity of TiO2-coated cordierite foam used in air cleaners, as well as the evaluation methodology. Furthermore, we developed Cu2+/TiO2-coated cordierite foam and investigated the reduction in viral infection ratio. The method for evaluation of antibacterial activity of TiO2-coated cordierite foam could also be applied to evaluation of antiviral activity. We showed that Cu2+/TiO2-coated cordierite foam reduced the viral infection ratio to a greater extent than TiO2-coated cordierite foam. Our findings suggest that the infection risk by polluted air could be decreased using Cu2+/TiO2-coated cordierite foam in air cleaners.

Highly efficient antiviral and antibacterial activities of solid-state cuprous compounds.

We found that several solid-state cuprous compounds, including cuprous oxide (Cu(2)O), sulfide (Cu(2)S), iodide (CuI), and chloride (CuCl), have highly efficient antiviral activities, whereas those of solid-state silver and cupric compounds are markedly lower. On a Cu(2)O-loaded glass substrate, for example, the infectious activity of bacteriophages was reduced by 5-orders of magnitude within 30 min and by 3-orders of magnitude within 1h for bacteria. In contrast, the infectious activities of both phages and bacteria were not markedly reduced on CuO-loaded substrates within a similar time frame. To determine the origin of this inhibitory activity, we investigated the effects of reactive oxygen species (ROS), leached copper ions, and the solid-state compound itself against bacteriophages, and concluded that infectious activity is lost following direct contact with the solid-state surface of cuprous compounds, but not ROS or copper ions. Furthermore, we found that Cu(2)O adsorbed and denatured more proteins than CuO, which suggests the difference of the inhibitory activity between Cu(2)O and CuO.

A facile one-step hydrothermal synthesis of rhombohedral CuFeO2 crystals with antivirus property.

The rhombohedral-like CuFeO(2) crystals are synthesized via a facile hydrothermal route by using propionaldehyde as a reducing agent. The obtained CuFeO(2) crystals show promising efficiency in the inactivation of bacteriophage Qß.

Photocatalytic inactivation of influenza virus by titanium dioxide thin film.

Titanium dioxide (TiO(2)) under ultraviolet (UV) light produces a strong oxidative effect and may therefore be used as a photocatalytic disinfectant. Although many studies on the photocatalytic inactivation of bacteria have been reported, few studies have addressed virus inactivation. In the present study, we demonstrated the inactivation of influenza virus through TiO(2) photocatalysis using TiO(2) nanoparticles immobilized on a glass plate. The influences of the UV intensity, UV irradiation time and bovine serum albumin (BSA) concentration in the viral suspensions on the inactivation kinetics were investigated. Additionally, we also determined whether the International Organization for Standardization (ISO) methodology for the evaluation of antibacterial activity of TiO(2) photocatalysis could be applied to the evaluation of antiviral activity. The viral titers were dramatically reduced by the photocatalytic reaction. Even with a low intensity of UV-A (0.01 mW cm(-2)), a viral reduction of approximately 4-log(10) was observed within a short irradiation time. The viral inactivation kinetics were associated with the exposure time, the UV intensity and the BSA concentration in virus suspensions. These results show that TiO(2) photocatalysis could be used to inactivate the influenza virus. Furthermore, a minor modification of the ISO test method for anti-bacterial effects of TiO(2) photocatalysis could be useful for the evaluation of antiviral activity.

Hybrid Cu(x)O/TiO2 nanocomposites as risk-reduction materials in indoor environments.

Photocatalytic TiO(2) powders impart ultraviolet light-induced self-cleaning and antibacterial functions when coated on outdoor building materials. For indoor applications, however, TiO(2) must be modified for visible-light and dark sensitivity. Here we report that the grafting of nanometer-sized Cu(x)O clusters onto TiO(2) generates an excellent risk-reduction material in indoor environments. X-ray absorption near-edge structure using synchrotron radiation and high-resolution transmission electron microscopic analyses revealed that Cu(x)O clusters were composed of Cu(I) and Cu(II) valence states. The Cu(II) species in the Cu(x)O clusters endow TiO(2) with efficient visible-light photooxidation of volatile organic compounds, whereas the Cu(I) species impart antimicrobial properties under dark conditions. By controlling the balance between Cu(I) and Cu(II) in Cu(x)O, efficient decomposition and antipathogenic activity were achieved in the hybrid Cu(x)O/TiO(2) nanocomposites.

Photocatalytic inactivation of bacteriophages by TiO2-coated glass plates under low-intensity, long-wavelength UV irradiation.

The International Organization for Standardization (ISO) was used to evaluate antibacterial activity by titanium dioxide (TiO(2)) photocatalysis since 2006. We evaluated photocatalytic inactivation of Qß and T4 bacteriophages induced by low-intensity, long-wavelength ultraviolet A (UVA; 0.1 mW cm(-2) and 0.001 mW cm(-2)) irradiation on a TiO(2)-coated glass plate using the ISO methodology. The results indicated that both bacteriophages were inactivated at 0.001 mW cm(-2) UVA. The intensity of UV light, including long-wavelength light (UVA), is very low in an actual indoor environment. Thus, TiO(2) photocatalysis can be beneficial for inactivating viruses in an indoor environment. Experiments using qPCR and bovine serum albumin degradation assume that viral inactivation is caused by outer viral protein disorder and not by viral RNA reduction by reactive oxygen species produced during TiO(2) photocatalysis. Furthermore, we showed that the ISO methodology for standard testing of antibacterial activity by TiO(2) photocatalysis can be applied to assess antiviral activity.

Detoxification of phytotoxic compounds by TiO2 photocatalysis in a recycling hydroponic cultivation system of asparagus.

TiO 2 photocatalytic decomposition and detoxification of phytotoxic compounds released by the roots of asparagus ( Asparagus officinalis L.) were investigated from the viewpoint of conservation-oriented cultivation. The phytotoxically active fraction was extracted either from dried asparagus roots or from the recycled nutrient solution of an asparagus hydroponic cultivation system. We found that the phytotoxic activity gradually decreased in the fraction with TiO 2 powder under irradiation with ultraviolet (UV) light at an intensity of 1.0 mW/cm (2). The growth of asparagus plants under actual cultivation conditions was also investigated by comparing asparagus grown in a hydroponic system where recycled waste nutrient solution was photocatalytically treated with solar light and a system with untreated recycled waste nutrient solution. The results showed, as measured by growth indices such as stem length and stem thickness, that asparagus growth in the photocatalytically treated system was superior to the untreated one. Furthermore, the yield of asparagus spears was 1.6-fold greater in the photocatalytically treated system, demonstrating the detoxification effect on the phytotoxic compounds and also the killing effect on pathogenic microorganisms.

Preparation, photocatalytic activities, and dye-sensitized solar-cell performance of submicron-scale TiO2 hollow spheres.

We prepared submicron-scale spherical hollow particles of anatase TiO2 by using a polystyrene-bead template. The obtained particles were very uniform in size, with a diameter of 490 nm and a shell thickness of 30 nm. The Brunauer-Emmett-Teller surface area measurements revealed a large value of 70 m2/g. The photocatalytic property was investigated by the complete decomposition of gaseous isopropyl alcohol under UV irradiation. It was indicated that the activity of the hollow spheres was 1.8 times higher than that of the conventional P25 TiO2 nanoparticles with a diameter of 30 nm. Furthermore, we fabricated a dye-sensitized solar cell (DSC) using an electrode of the TiO2 hollow spheres, and examined the photovoltaic performance under simulated sunlight. Although the per-area efficiency was rather low (1.26%) because of a low area density of TiO2 on the electrode, the per-weight efficiency was 2.5 times higher than those of the conventional DSCs of TiO2.

Bactericidal activity of copper-deposited TiO2 thin film under weak UV light illumination.

The bactericidal activity of copper-deposited titanium dioxide thin film (Cu/TiO2) was investigated under very weak ultraviolet (UV) light illumination. To elucidate the roles of the film photocatalyst and the deposited copper in the bactericidal activity, cells from a copper-resistant Escherichia coli (E. coli) strain were utilized. A decrease in survival rate was not observed with the copper-resistant cells under dark conditions, but when illuminated with a very weak UV intensity of 1 microW/cm2, the survival rate decreased, suggesting photocatalytic bactericidal activity. The decay curve of survival on the Cu/TiO2 film under very weak UV light illumination consisted of two steps, similar to the survival change of normal E. coli on TiO2 films under rather strong UV illumination. The first step is due to the partial decomposition of the outer membrane in the cell envelope by a photocatalytic process, followed by permeation of the copper ions into the cytoplasmic membrane. The second step is due to a disorder of the cytoplasmic membrane caused by the copper ions, which results in a loss of the cell's integrity. These processes explain why the Cu/TiO2 film system shows an effective bactericidal activity even under very weak UV light illumination.