Three-dimensional evaluation of mandibular width after mandibular asymmetric setback surgery using sagittal split ramus osteotomy / 대한치과교정학회지

Objective@#The study aimed to evaluate the changes in mandibular width after sagittal split ramus osteotomy (SSRO) in patients with mandibular asymmetric prognathism using cone-beam computed tomography (CBCT). @*Methods@#Seventy patients who underwent SSRO for mandibular setback surgery were included in two groups, symmetric (n = 35) and asymmetric (n = 35), which were divided according to the differences in their right and left setback amounts. The mandibular width was evaluated three-dimensionally using CBCT images taken immediately before surgery (T1), 3 days after surgery (T2), and 6 months after surgery (T3). Repeated measures analysis of variance was applied to verify the differences in mandibular width statistically. @*Results@#Both groups showed a significant increase in the mandibular width at T2, followed by a significant decrease at T3. No significant difference was observed between T1 and T3 in any of the measurements. No significant differences were found between the two groups (p > 0.05). Conclusions: After mandibular asymmetric setback surgery using SSRO, the mandibular width increased immediately but returned to its original width 6 months after surgery.

Three-dimensional evaluation of the pharyngeal airway space in patients with anterior open bite / 대한치과교정학회지

Objective@#This study aimed to three-dimensionally evaluate the pharyngeal airway space (PAS) of patients with anterior open bite (AOB) by using conebeam computed tomography (CBCT) and compare the findings with those obtained in individuals with normal occlusion. @*Methods@#The open bite group (OBG, n = 25) consisted of patients with an anterior overbite of –3 mm or less, while the control group (n = 25) consisted of age- and sex-matched individuals with an anterior overbite of 1–3 mm, Angle Class I malocclusion (1° ≤ point A-nasion-point B angle ≤ 4°), and a normodivergent profile (22° ≤ Frankfort mandibular plane angle ≤ 28°). After the CBCT data were reconstructed into a three-dimensional image, the PAS was segmented into four parts, and the volume of each part was measured. Pharyngeal airway length (PAL) and the area and transverse width of the part showing minimal constriction were also measured. Pearson’s correlation analysis was used to evaluate the correlation between changes in the PAS and the amount of anterior overbite. @*Results@#The OBG showed a significantly narrower airway space in the nasopharyngeal, hypopharyngeal, and total airway volumes. The OBG also showed a significantly smaller area and transverse width of the part with minimal constriction. The OBG showed a significantly longer PAL, but there was no correlation between the amount of anterior overbite and the changes in PAS. @*Conclusions@#The PAS was associated with AOB. Patients with AOB had a narrower PAS and a smaller part showing minimal constriction.

Biomechanical analysis for different mandibular total distalization methods with clear aligners: A finite element study / 대한치과교정학회지

Objective@#The purpose of this finite element method (FEM) study was to analyze the biomechanical differences and tooth displacement patterns according to the traction direction, methods, and sites for total distalization of the mandibular dentition using clear aligner treatment (CAT). @*Methods@#A finite element analysis was performed on four FEM models using different traction methods (via a precision cut hook or button) and traction sites (mandibular canine or first premolar). A distalization force of 1.5 N was applied to the traction site by changing the direction from –30 to +30° to the occlusal plane. The initial tooth displacement and von Mises stress on the clear aligners were analyzed. @*Results@#All CAT-based total distalization groups showed an overall trend of clockwise or counterclockwise rotation of the occlusal plane as the force direction varied. Mesiodistal tipping of individual teeth was more prominent than that of bodily movements. The initial displacement pattern of the mandibular teeth was more predominant based on the traction site than on the traction method. The elastic deformation of clear aligners is attributed to unintentional lingual tipping or extrusion of the mandibular anterior teeth. @*Conclusions@#The initial tooth displacement can vary according to different distalization strategies for CAT-based total distalization. Discreet application and biomechanical understanding of traction sites and directions are necessary for appropriate mandibular total distalization.

Avoiding unnecessary intraoperative sentinel lymph node frozen section biopsy of patients with early breast cancer

Purpose@#After the publication of the ACOSOG (American College of Surgeons Oncology Group) Z0011 trial, the rate of axillary lymph node dissection has reduced. Thus, the need for intraoperative frozen section biopsy of sentinel lymph nodes (SLNs) has become controversial. We identified patients for whom intraoperative SLN frozen section biopsy could be omitted and found that frozen section biopsy rate can be reduced. @*Methods@#We reviewed the records of patients with tumors ≤5 cm in diameter who underwent breast-conserving surgery between January 2013 and December 2019 at Seoul St. Mary’s Hospital. Clinicopathological and imaging characteristics were compared according to number of positive SLNs (0–2 SLNs positive vs. ≥3 SLNs positive). @*Results@#A total of 1,983 patients were included in this study. Thirty-two patients (1.6%) had at least 3 positive SLNs. Patients with ≥3 positive SLNs had significantly larger tumors and were more frequently high-grade tumors (P < 0.001 and P = 0.002, respectively). Identification of suspicious lymph nodes on imaging studies was also associated with the presence of ≥3 positive SLNs (hazard ratio, 11.54; 95% confidence interval, 4.42–30.10). All patients with none or only 1 suspicious lymph node on any imaging modality (n = 647, 32.6%) had 0–2 positive SLNs. Also, among patients with clinical T1-stage tumors and at least 2 suspicious lymph nodes on only 1 imaging modality (n = 514, 25.9%), only 2 cases had ≥3 positive SLNs. @*Conclusion@#We found that intraoperative SLN frozen biopsy could be omitted in patients using tumor size and axillary lymph node status on imaging modality.

Clinical Utility of MicroPure US Imaging for Breast Microcalcifications

Purpose@#To evaluate the performance of MicroPure US imaging to detect and characterize microcalcifications. @*Materials and Methods@#A total of 171 lesions with suspicious microcalcifications seen on mammography and B-mode US were included and simultaneously evaluated using MicroPure US imaging. The size of microcalcifications was divided into small (punctate, amorphous, fine pleomorphic, and fine linear) and large (coarse heterogeneous), and the extent was divided into narrow (grouped) and wide (others). MicroPure US imaging visibility was divided into four types based on the number of microcalcifications on the two images: B > M (more on B-mode), B = M (similar), B < M (more on MicroPure), and negative. Triple pairwise comparison was used to evaluate the imaging features according to the MicroPure US imaging visibility. @*Results@#Among the 171 lesions examined, 157 lesions (91.8%) were detected by MicroPure US imaging. The proportion of Breast Imaging Reporting and Data System (BI-RADS) category 4A was significantly higher in the MicroPure positive group, and that of category 4B was significantly higher in the MicroPure negative group (p = 0.035). The other imaging features did not differ. Among the positive MicroPure subgroups, all features showed no significant difference. @*Conclusion@#MicroPure US imaging demonstrated 91.8% positivity in detecting microcalcifications on B-mode US. MicroPure US imaging visibility correlated with the BI-RADS category of microcalcifications.

Authorship and Inappropriate Authorship from an Ethical Publication Perspective

Authorship is important for research integrity and publication ethics, acting as the basis for credit and academic achievement. Moreover, publication achievements have a significant impact on research grants and academic careers. Inappropriate authorship has been reported for several reasons, including complex interests and competitive environments. One form of this is representative authorship misuse, which includes honorary and ghost authorships. Kin co-authorship, such as parent-children authorship, is another form of inappropriate authorship that has recently emerged as a social problem in Korea. To address these issues, the International Committee of Medical Journal Editors (ICMJE) has established criteria for authorship. Similarly, many journals use the Contributor Roles Taxonomy (CRediT) and Open Researcher and Contributor ID (ORCID) systems to prevent authorship misuse and systematically evaluate author credit and responsibility. Herein, this article reviews authorship and inappropriate authorship, as well as introduces methods to avoid authorship misuse.

Understanding Silicone Breast Implant-Associated Complications for Radiologists

With the increase in the number of cases of silicone implant insertion either for cosmetic surgery or breast reconstruction after mastectomy, it is not unusual to encounter patients with silicone implants in clinical settings. Recently, the first case of breast implant-associated anaplastic large cell lymphoma was reported in Korea. In addition to previously known complications, such as implant rupture or contracture, the number of implant-associated imaging examinations has also increased. Considering this background, radiologists should have sufficient knowledge about the type of examination required in patients who have undergone implant insertion and imaging findings to correctly identify implant-associated complications. In this article, various complications of silicone implants are discussed, including various imaging findings, which radiologists should know.

What shear wave elastography parameter best differentiates breast cancer and predicts its histologic aggressiveness?

Purpose@#This study aimed to identify useful shear wave elastography (SWE) parameters for differentiating breast cancer and predicting associated immunohistochemical factors and subtypes. @*Methods@#From November 2018 to February 2019, a total of 211 breast lesions from 190 patients who underwent conventional breast ultrasonography and SWE were included. The Breast Imaging Reporting and Data System categories and qualitative and quantitative SWE parameters for each lesion were obtained. Pathologic results including immunohistochemical factors were evaluated. The diagnostic performance of each parameter and its correlation with histological characteristics, immunohistochemical factors, and subtypes of breast cancer were analyzed using analysis of variance, the independent t test, the Fisher exact test, logistic regression analysis, and the DeLong method. @*Results@#Among 211 breast lesions, 82 were malignant, and 129 were benign. Of the SWE parameters, Emax showed the highest area under the curve (AUC) for differentiating malignant from benign lesions (AUC, 0.891; cut-off>50.85). Poor tumor differentiation and progesterone receptor-negativity were correlated with higher SDmean and Emax (P<0.05). Ki-67-positive breast cancer showed higher SDmean and a heterogeneous color distribution (P<0.05). Ki-67 and cytokeratin 5/6-positive breast cancers showed higher Emax/Efat ratios (P<0.05). Luminal B, human epidermal growth factor receptor 2-enriched, and triple-negative (non-basal) subtypes showed somewhat higher SDmean values than the luminal A and triple-negative (basal) subtypes (P=0.028). @*Conclusion@#Emax is a reliable parameter for differentiating malignancies from benign breast lesions. In addition, high stiffness and SDmean values in tumors measured on SWE could be used to predict poorly differentiated, progesterone receptor-negative, or Ki-67-positive breast cancer.

Immediate effects of mandibular posterior displacement on the pharyngeal airway space: A preliminary study / 대한치과교정학회지

OBJECTIVE@#This study aimed to evaluate the immediate effects of mandibular posterior displacement on the pharyngeal airway space (PAS) by using cephalometric evaluations and to investigate how the surrounding structures are schematically involved.@*METHODS@#In this retrospective study, 38 subjects with functional Class III malocclusion and two lateral cephalograms were selected. The first lateral cephalogram was taken with the mandible in the habitual occlusal position, and the second in anterior edge-to-edge bite. Paired t-test was used to analyze changes in the PAS, hyoid bone, tongue, and soft palate, followed by mandibular posterior displacement. Pearson's correlation analysis was used to determine the relationship between the amount of mandibular posterior displacement and other variables.@*RESULTS@#A statistically significant decrease was observed in the PAS following mandibular posterior displacement. Along with mandibular posterior displacement, the tongue decreased in length (p < 0.001) and increased in height (p < 0.05), while the soft palate increased in length, decreased in thickness, and was posteriorly displaced (p < 0.001). The hyoid bone was also posteriorly displaced (p < 0.05). There was no correlation between the amount of mandibular posterior displacement and the measured variables.@*CONCLUSIONS@#The PAS showed a statistically significant decrease following mandibular posterior displacement, which was a consequence of retraction of the surrounding structures. However, there were individual variances between the amount of mandibular posterior displacement and the measured variables.

Changes in High-Density Lipoprotein Cholesterol and Risks of Cardiovascular Events: A Post Hoc Analysis from the PICASSO Trial / 대한뇌졸중학회지

Background@#and purpose Whether pharmacologically altered high-density lipoprotein cholesterol (HDL-C) affects the risk of cardiovascular events is unknown. Recently, we have reported the Prevention of Cardiovascular Events in Asian Patients with Ischaemic Stroke at High Risk of Cerebral Haemorrhage (PICASSO) trial that demonstrated the non-inferiority of cilostazol to aspirin and superiority of probucol to non-probucol for cardiovascular prevention in ischemic stroke patients (clinicaltrials.gov: NCT01013532). We aimed to determine whether on-treatment HDL-C changes by cilostazol and probucol influence the treatment effect of each study medication during the PICASSO study. @*Methods@#Of the 1,534 randomized patients, 1,373 (89.5%) with baseline cholesterol parameters were analyzed. Efficacy endpoint was the composite of stroke, myocardial infarction, and cardiovascular death. Cox proportional hazards regression analysis examined an interaction between the treatment effect and changes in HDL-C levels from randomization to 1 month for each study arm. @*Results@#One-month post-randomization mean HDL-C level was significantly higher in the cilostazol group than in the aspirin group (1.08 mmol/L vs. 1.00 mmol/L, P<0.001). The mean HDL-C level was significantly lower in the probucol group than in the non-probucol group (0.86 mmol/L vs. 1.22 mmol/L, P<0.001). These trends persisted throughout the study. In both study arms, no significant interaction was observed between HDL-C changes and the assigned treatment regarding the risk of the efficacy endpoint. @*Conclusions@#Despite significant HDL-C changes, the effects of cilostazol and probucol treatment on the risk of cardiovascular events were insignificant. Pharmacologically altered HDL-C levels may not be reliable prognostic markers for cardiovascular risk.

Analysis of the molecular subtypes of preoperative core needle biopsy and surgical specimens in invasive breast cancer

Background@#Accurate molecular classification of breast core needle biopsy (CNB) tissue is important for determining neoadjuvant systemic therapies for invasive breast cancer. The researchers aimed to evaluate the concordance rate (CR) of molecular subtypes between CNBs and surgical specimens. @*Methods@#This study was conducted with invasive breast cancer patients who underwent surgery after CNB at Seoul St. Mary’s Hospital between December 2014 and December 2017. Estrogen receptor (ER), progesterone receptor (PR), human epidermal growth factor receptor 2 (HER2), and Ki67 were analyzed using immunohistochemistry. ER and PR were evaluated by Allred score (0–8). HER2 was graded from 0 to +3, and all 2+ cases were reflex tested with silver in situ hybridization. The labeling index of Ki67 was counted by either manual scoring or digital image analysis. Molecular subtypes were classified using the above surrogate markers. @*Results@#In total, 629 patients were evaluated. The CRs of ER, PR, HER2, and Ki67 were 96.5% (kappa, 0.883; p<.001), 93.0% (kappa, 0.824; p<.001), 99.7% (kappa, 0.988; p<.001), and 78.7% (kappa, 0.577; p<.001), respectively. Digital image analysis of Ki67 in CNB showed better concordance with Ki67 in surgical specimens (CR, 82.3%; kappa, 0.639 for digital image analysis vs. CR, 76.2%; kappa, 0.534 for manual counting). The CRs of luminal A, luminal B, HER2, and triple negative types were 89.0%, 70.0%, 82.9%, and 77.2%, respectively. @*Conclusions@#CNB was reasonably accurate for determining ER, PR, HER2, Ki67, and molecular subtypes. Using digital image analysis for Ki67 in CNB produced more accurate molecular classifications.

Automated Breast Ultrasound Screening for Dense Breasts

Early Recurrence of Breast Cancer after the Primary Treatment: Analysis of Clinicopathological and Radiological Predictive Factors

Purpose@#To evaluate the value of clinicopathologic factors and imaging features of primary breast cancer in predicting early recurrence after the primary treatment. @*Materials and Methods@#We enrolled 480 patients who had been followed-up after breast-conserving surgery and adjuvant therapy from January 2010 to December 2014 at our hospital. Early recurrence was defined as recurrence within 3 years after completion of primary treatment, and univariate and multivariate logistic regression analyses were performed to determine the clinicopathologic and imaging predictive factors of early recurrence. @*Results@#In the univariate analysis, among the clinicopathologic factors, advanced stage (p = 0.021), high histologic grade (p < 0.001), estrogen receptor negative (p = 0.002), high Ki-67 proliferation index (p = 0.017), and triple-negative breast cancer (p = 0.019), and among the imaging features, multifocality (p < 0.001), vessels in the rim on Doppler ultrasonography (US) (p = 0.012), and rim enhancement (p < 0.001) on magnetic resonance imaging of the breast were significantly associated with early recurrence. In the multivariate analysis, advanced stage [odds ratio (OR) = 3.47; 95% confidence interval (CI) 1.12–10.73; p = 0.031] and vessels in the rim on Doppler US (OR = 3.32; 95% CI 1.38–8.02; p = 0.008) were the independent predictive factors of early recurrence. @*Conclusion@#Vascular findings in the rim of the primary breast cancer on Doppler US before treatment is a radiologic independent predictive factor of early recurrence after the primary treatment.

Early Recurrence of Breast Cancer after the Primary Treatment: Analysis of Clinicopathological and Radiological Predictive Factors

Purpose@#To evaluate the value of clinicopathologic factors and imaging features of primary breast cancer in predicting early recurrence after the primary treatment. @*Materials and Methods@#We enrolled 480 patients who had been followed-up after breast-conserving surgery and adjuvant therapy from January 2010 to December 2014 at our hospital. Early recurrence was defined as recurrence within 3 years after completion of primary treatment, and univariate and multivariate logistic regression analyses were performed to determine the clinicopathologic and imaging predictive factors of early recurrence. @*Results@#In the univariate analysis, among the clinicopathologic factors, advanced stage (p = 0.021), high histologic grade (p < 0.001), estrogen receptor negative (p = 0.002), high Ki-67 proliferation index (p = 0.017), and triple-negative breast cancer (p = 0.019), and among the imaging features, multifocality (p < 0.001), vessels in the rim on Doppler ultrasonography (US) (p = 0.012), and rim enhancement (p < 0.001) on magnetic resonance imaging of the breast were significantly associated with early recurrence. In the multivariate analysis, advanced stage [odds ratio (OR) = 3.47; 95% confidence interval (CI) 1.12–10.73; p = 0.031] and vessels in the rim on Doppler US (OR = 3.32; 95% CI 1.38–8.02; p = 0.008) were the independent predictive factors of early recurrence. @*Conclusion@#Vascular findings in the rim of the primary breast cancer on Doppler US before treatment is a radiologic independent predictive factor of early recurrence after the primary treatment.

Image quality and artifacts in automated breast ultrasonography

Three-dimensional automated breast ultrasonography (ABUS) has been approved for screening Epub ahead of print studies as an adjunct to mammography. ABUS provides proper orientation and documentation, resulting in better reproducibility. Optimal image quality is essential for a proper diagnosis, and high-quality images should be ensured when ABUS is used in clinical settings. Image quality in ABUS is highly dependent on the acquisition procedure. Artifacts can interfere with the visibility of abnormalities, reduce the overall image quality, and introduce clinical and technical problems. Nipple shadow and reverberation artifacts are some of the artifacts frequently encountered in ABUS. Radiologists should be familiar with proper image acquisition techniques and possible artifacts in order to acquire high-quality images.

Full mouth rehabilitation utilizing computer guided implant surgery and CAD/CAM / 대한치과보철학회지

Computer aided design and manufacturing and implant surgery using a guide template improve restoration-driven implant treatment procedures. This case utilized those digital technologies to make definitive prostheses for a patient. According to the work flow of digital dentistry, cone beam computed tomography established the treatment plan, which was followed to make the guide template for implant placement. The template guided the implants to be installed as planned. The customized abutments and surveyed fixed restorations were digitally designed and made. The metal framework of the removable partial denture was cast from resin pattern using an additive manufacturing technique, and the artificial resin teeth were replaced with the zirconia onlays for occlusal stability. These full mouth rehabilitation procedures provided functionally and aesthetically satisfactory results for the patient.

A Case Report of Juvenile Hypertrophy of the Breast in a 15-Year-Old Girl: Presented with Asymmetric Breast Enlargement and a Focal Mass-like Lesion

Juvenile hypertrophy of the breast is a rare condition, leading to hyperplastic breast anomalies in adolescents. Here, we report a case involving a 15-year-old girl, presented with asymmetric enlargement of the left breast. Pronounced parenchymal thickening was found on initial ultrasonography (US). MRI and second-look US revealed a focal mass-like lesion on the left mid-lateral breast, confirmed as juvenile hypertrophy of the breast on pathology.

Notch1 in Tumor Microvascular Endothelial Cells and Tumoral miR-34a as Prognostic Markers in Locally Advanced Triple-Negative Breast Cancer / 한국유방암학회지

Effects of different finishing/polishing protocols and systems for monolithic zirconia on surface topography, phase transformation, and biofilm formation

PURPOSE: The purpose of this study was to evaluate the effects of various protocols and systems for finishing and polishing monolithic zirconia on surface topography, phase transformation, and bacterial adhesion. MATERIALS AND METHODS: Three hundred monolithic zirconia specimens were fabricated and then treated with three finishing and polishing systems (Jota [JO], Meisinger [ME], and Edenta [ED]) using four surface treatment protocols: coarse finishing alone (C); coarse finishing and medium polishing (CM); coarse finishing and fine polishing (CF); and coarse finishing, medium polishing, and fine polishing (CMF). Surface roughness, crystal phase transformation, and bacterial adhesion were evaluated using atomic force microscopy, X-ray diffraction, and streptococcal biofilm formation assay, respectively. One-way and two-way analysis of variance with Tukey post hoc tests were used to analyze the results (α=.05). RESULTS: In this study, the surface treatment protocols and systems had significant effects on the resulting roughness. The CMF protocol produced the lowest roughness values, followed by CM and CF. Use of the JO system produced the lowest roughness values and the smallest biofilm mass, while the ME system produced the smallest partial transformation ratio. The ED group exhibited the highest roughness values, biofilm mass, and partial transformation ratio. CONCLUSION: Stepwise surface treatment of monolithic zirconia, combined with careful polishing system selection, is essential to obtaining optimal microstructural and biological surface results.

Influence of surface treatments and repair materials on the shear bond strength of CAD/CAM provisional restorations

PURPOSE: To evaluate the effect of surface treatments and repair materials on the shear bond strength and to measure the fracture toughness of CAD/CAM provisional restoration materials. MATERIALS AND METHODS: Four CAD/CAM (3D printing: Nextdent C&B and ZMD-1000B Temporary, CAD/CAM resin block: Yamahachi PMMA disk and Huge PMMA block) and four conventional (monometacrylate: Jet and Alike, dimetacrylate: Luxatemp and Protemp 4) materials were selected to fabricate disk-shaped specimens and divided into six groups according to surface treatment (n=10). CAD/CAM materials were repaired with Jet or Luxatemp, while conventional materials were repaired with their own materials. The shear bond strength was measured by using universal testing machine. Ten rectangular column-shaped specimens for each material were fabricated to measure the fracture toughness by single edge v notched beam technique. Statistical analysis was performed by one-way ANOVA. RESULTS: The highest shear bond strength of CAD/CAM materials was achieved by SiC paper + sandblasting. It was also accomplished when repairing 3D printing materials with Luxatemp, and repairing CAD/CAM resin blocks with Jet. Yamahachi PMMA disk showed the highest fracture toughness. Nextdent C&B showed the lowest fracture toughness value but no statistically significant difference from Alike and Luxatemp (P>.05). CONCLUSION: In order to successfully repair the CAD/CAM provisional restoration, mechanical surface treatment and appropriate repair material according to the CAD/CAM material type should be selected. The CAD/CAM provisional materials have proper mechanical properties for clinical use as compared to conventional materials.