Enantioselective synthesis of [1,1'-binaphthalene]-8,8'-diyl bis(diphenylphosphane) and its derivatives.

Two 8,8' disubstituted binaphthyl ligands have been designed and synthesized in 3.1% and 11.4% overall yield, respectively. X-ray structure analysis demonstrated that a unique chiral microenvironment was created. With the assistance of a new aggregation-induced polarization (AIP) technology, chiral aggregates were determined as the fraction of polar solvent increased in the nonpolar/polar solvent system, which indicated their potential in modern asymmetric synthesis and catalysis.

Aggregation-Induced Catalysis: Asymmetric Catalysis with Chiral Aggregates.

So far, there have been 4 methods to control chirality including the use of chiral auxiliaries, reagents, solvents, and catalysts documented in literature and textbooks. Among them, asymmetric catalysts are normally divided into homogeneous and heterogeneous catalysis. In this report, we present a new type of asymmetric control-asymmetric catalysis via chiral aggregates that would not belong to the above categories. This new strategy is represented by catalytic asymmetric dihydroxylation reaction of olefins in which chiral ligands are aggregated by taking advantage of typical aggregation-induced emission systems containing tetrahydrofuran and H2O cosolvents. It was proven that the chiral induction can be enhanced from er of 78:22 to 97:3 simply by changing the ratios of these 2 cosolvents. The formation of chiral aggregates of asymmetric dihydroxylation ligands, (DHQD)2PHAL and (DHQ)2PHAL, has been proven by aggregation-induced emission and a new analytical tool-aggregation-induced polarization established by our laboratory. In the meanwhile, chiral aggregates were found to be formed either by adding NaCl into tetrahydrofuran/H2O systems or by increasing concentrations of chiral ligands. The present strategy also showed promising reverse control of enantioselectivity in the Diels-Alder reaction. This work is anticipated to be extended broadly to general catalysis, especially to asymmetric catalysis in the future.

From Center-to-Multilayer Chirality: Asymmetric Synthesis of Multilayer Targets with Electron-Rich Bridges.

Asymmetric synthesis of new atropisomerically multilayered chiral targets has been achieved by taking advantage of the strategy of center-to-multilayer chirality and double Suzuki-Miyaura couplings. Diastereomers were readily separated via flash column chromatography and well characterized. Absolute configuration assignment was determined by X-ray structural analysis. Five enantiomerically pure isomers possessing multilayer chirality were assembled utilizing anchors involving electron-rich aromatic connections. An overall yield of 0.69% of the final target with hydroxyl attachment was achieved over 11 steps from commercially available starting materials.

Multilayer 3D Chiral Folding Polymers and Their Asymmetric Catalytic Assembly.

A novel class of polymers and oligomers of chiral folding chirality has been designed and synthesized, showing structurally compacted triple-column/multiple-layer frameworks. Both uniformed and differentiated aromatic chromophoric units were successfully constructed between naphthyl piers of this framework. Screening monomers, catalysts, and catalytic systems led to the success of asymmetric catalytic Suzuki-Miyaura polycouplings. Enantio- and diastereochemistry were unambiguously determined by X-ray structural analysis and concurrently by comparison with a similar asymmetric induction by the same catalyst in the asymmetric synthesis of a chiral three-layered product. The resulting chiral polymers exhibit intense fluorescence activity in a solid form and solution under specific wavelength irradiation.

Asymmetric Catalytic Assembly of Triple-Columned and Multilayered Chiral Folding Polymers Showing Aggregation-Induced Emission (AIE).

Invited for the cover of this issue are Guigen Li's groups at Texas Tech University and Nanjing University. The cover artwork shows that chirality patterns exist from universal to molecular levels showing light emission properties. Read the full story of multilayer 3D chirality and its asymmetric catalytic synthesis at 10.1002/chem.202104102.

Asymmetric Catalytic Assembly of Triple-Columned and Multilayered Chiral Folding Polymers Showing Aggregation-Induced Emission (AIE).

Unprecedented chiral multilayer folding 3D polymers have been assembled and regulated by uniform and differentiated aromatic chromophore units between naphthyl piers. Screening catalysts, catalytic systems and monomers were proven to be crucial for asymmetric catalytic Suzuki-Miyaura polycouplings for this assembly. X-ray crystallography of the corresponding dimers and trimers revealed the absolute configuration and the intermolecular packing pattern. Up to 61 960 Mw /41 900 Mn and m/z 4317 for polymers and oligomers, as confirmed by gel permeation chromatography (GPC) and MALDI-TOF MS, indicated that these frameworks were composed of multiple stacked layers. The resulting multiple π-assemblies exhibited remarkable optical properties in aggregated states (photoluminescence in solids and aggregation-induced emission in solutions), as well as reversible redox properties in electrochemical performance.

Asymmetric synthesis of functionalized 2,3-dihydrobenzofurans using salicyl N-phosphonyl imines facilitated by group-assisted purification (GAP) chemistry.

In this work, we present a strategy for the preparation of functionalized 2,3-dihydrobenzofuran derivatives via the Cs2CO3-catalyzed domino annulation of enantiopure chiral salicyl N-phosphonyl imines with bromo malonates, which offers an avenue for the construction of 2,3-dihydrobenzofurans. Nineteen examples were synthesized in impressive chemical yields and diastereoselectivity. The products were purified simply by washing the crude mixtures with hexanes following group-assisted purification chemistry/technology to bypass traditional separation methods which often result in a loss of product. The absolute configuration was unambiguously assigned by X-ray structural analysis.

Asymmetric Catalytic Approach to Multilayer 3D Chirality.

Invited for the cover of this issue is Guigen Li and co-workers at Texas Tech University and Nanjing University. The cover artwork shows that chirality phenomena exists in the universe and in nature, including at micro and molecular levels. Read the full text of the article at 10.1002/chem.202100700.

Asymmetric Catalytic Approach to Multilayer 3D Chirality.

The first asymmetric catalytic approach to multilayer 3D chirality has been achieved by using Suzuki-Miyaura cross-couplings. New chiral catalysts were designed and screened under various catalytic systems that proved chiral amide-phosphines to be more efficient ligands than other candidates. The multilayer 3D framework was unambiguously determined by X-ray structural analysis showing a parallel pattern of three layers consisting of top, middle and bottom aromatic rings. The X-ray structure of a catalyst complex, dichloride complex of Pd-phosphine amide, was obtained revealing an interesting asymmetric environment nearby the Pd metal center. Three rings of multilayer 3D products can be readily changed by varying aromatic ring-anchored starting materials. The resulting multilayer products displayed strong luminescence under UV irradiation and strong aggregation-induced emission (AIE). In the future, this work would benefit not only the field of asymmetric synthesis but also materials science, in particular polarized organic electronics, optoelectronics and photovoltaics.

Asymmetric [4 + 2] cycloaddition synthesis of 4H-chromene derivatives facilitated by group-assisted-purification (GAP) chemistry.

In this work, we present a strategy for the preparation of functionalized 4H-chromene derivatives via a Cs2CO3-catalyzed [4 + 2] cycloaddition of enantiopure chiral salicyl N-phosphonyl imines with allenoates. Fifteen examples were achieved in excellent yields and diastereoselectivity. The products were purified simply by washing the crude mixture with hexanes following the Group-Assisted Purification (GAP) chemistry/technology to bypass traditional separation methods. The absolute configuration was unambiguously determined by X-ray structure analysis.

Caffeine Timing Improves Lower-Body Muscular Performance: A Randomized Trial.

Little is known about the optimal time to consume caffeine prior to exercise to maximize the ergogenic benefits of the substance. Purpose: To determine the optimal pre-exercise time interval to consume caffeine to improve lower-body muscular performance. A secondary aim was to identify the presence of any sex differences in responses to timed caffeine administration. Methods: Healthy, resistance-trained males (n = 18; Mean±SD; Age: 25.1 ± 5.7 years; Height: 178.4 ± 7.1 cm; Body mass: 91.3 ± 13.5 kg; Percent body fat: 20.7 ± 5.2; Average caffeine consumption: 146.6 ± 100.3 mg/day) and females (n = 11; Mean ± SD; Age: 20.1 ± 1.6 years; Height: 165.0 ± 8.8 cm; Body mass: 65.8 ± 10.0 kg; Percent bodyfat: 25.8 ± 4.2; Average caffeine consumption: 111.8 ± 91.7 mg/day) participated in this investigation. In a randomized, double-blind, placebo-controlled, crossover fashion, participants consumed 6 mg·kg-1 caffeine or placebo solution at three time points: 2 h prior (2H), 1 h prior (1H), or 30 min prior (30M) to exercise testing. During three visits, caffeine was randomly administered at one time point, and placebo was administered at the other two time points. During one visit, placebo was administered at all three time points. Next, participants performed isometric mid-thigh pulls (IMTP), countermovement vertical jumps (CMVJ), and isometric/isokinetic knee extensor testing (ISO/ISOK). Results: Caffeine administered at 1H significantly improved absolute CMVJ and ISO performance relative to placebo. Mean CMVJ jump height was significantly higher during 1H compared to 30M. However, only caffeine administered at 30M significantly improved absolute measures of isokinetic performance. Analysis of the pooled caffeine conditions revealed that muscular performance was more consistently augmented by caffeine in males compared to females. Conclusions: Pre-exercise caffeine timing significantly modulated participant responses to the substance, with 1H exerting the most consistent ergogenic benefits relative to other time points, particularly compared to 2H. Male participants were found to respond more consistently to caffeine compared to female participants. These results suggest that active individuals can maximize the ergogenic effects of caffeine by consuming the substance ~1 h prior to the point when peak muscular performance is desired.

Multilayer 3D Chirality and Its Synthetic Assembly.

3D chirality of sandwich type of organic molecules has been discovered. The key element of this chirality is characterized by three layers of structures that are arranged nearly in parallel fashion with one on top and one down from the center plane. Individual enantiomers of these molecules have been fully characterized by spectroscopies with their enantiomeric purity measured by chiral HPLC. The absolute configuration was unambiguously assigned by X-ray diffraction analysis. This is the first multilayer 3D chirality reported and is anticipated to lead to a new research area of asymmetric synthesis and catalysis and to have a broad impact on chemical, medicinal, and material sciences in future.

Augmenting Sulfur Metabolism and Herbivore Defense in Arabidopsis by Bacterial Volatile Signaling.

Sulfur is an element necessary for the life cycle of higher plants. Its assimilation and reduction into essential biomolecules are pivotal factors determining a plant's growth and vigor as well as resistance to environmental stress. While certain soil microbes can enhance ion solubility via chelating agents or oxidation, microbial regulation of plant-sulfur assimilation has not been reported. With an increasing understanding that soil microbes can activate growth and stress tolerance in plants via chemical signaling, the question arises as to whether such beneficial bacteria also regulate sulfur assimilation. Here we report a previously unidentified mechanism by which the growth-promoting rhizobacterium Bacillus amyloliquefaciens (GB03) transcriptionally activates genes responsible for sulfur assimilation, increasing sulfur uptake and accumulation in Arabidopsis. Transcripts encoding for sulfur-rich aliphatic and indolic glucosinolates are also GB03 induced. As a result, GB03-exposed plants with elevated glucosinolates exhibit greater protection against the generalist herbivore, Spodoptera exigua (beet armyworm, BAW). In contrast, a previously characterized glucosinolate mutant compromised in the production of both aliphatic and indolic glucosinolates is also compromised in terms of GB03-induced protection against insect herbivory. As with in vitro studies, soil-grown plants show enhanced glucosinolate accumulation and protection against BAW feeding with GB03 exposure. These results demonstrate the potential of microbes to enhance plant sulfur assimilation and emphasize the sophisticated integration of microbial signaling in plant defense.

Photolytic breakdown of fullerene C60 cages in an aqueous suspension.

Fullerene C60, a class of carbon nanomaterials, is widely used and is likely to reach the environment. The degradation and transformation of C60 aqueous suspensions exposed to simulated sunlight were studied. C60 aqueous suspensions prepared by stirring pristine C60 in water under sunlight exposure undergo breakdown with formation of a mixture of compounds with unknown chemical structure. The mass and infrared spectrometric analysis of the breakdown products shows the presence of broken C60 cages, as well as of oxygen and hydrogen atoms in their structure. The presence of oxygen in the breakdown products indicates a possible interaction of C60 molecule with oxygen from the air as well as with water. Interaction with water could also explain the presence of H atoms in the breakdown products. This demonstrates that fullerenes C60 are not stable in the environment and that the breakdown products should be considered when evaluating the environmental impact of fullerenes C60.

Effect of pendant group length upon metal ion complexation in acetonitrile by di-ionized calix[4]arenes bearing two dansyl fluorophores.

A series of three di-ionizable calix[4]arenes with two pendant dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims was synthesized. Structures of the three ligands were identical except for the length of the spacers which connected the two dansyl groups to the calix[4]arene scaffold. Following conversion of the ligands into their di-ionized di(tetramethylammonium) salts, absorption and emission spectrophotometry were utilized to probe the influence of metal cation (Li+, Na+, K+, Rb+, Cs+, Mg2+, Ca2+, Sr2+, Ba2+, Ag+, Cd2+, Co2+, Fe2+, Hg2+, Mn2+, Pb2+, Zn2+ and Fe3+) complexation in acetonitrile. Upon complexation with these metal cations, emission spectra underwent marked red shifts and quenching of the dansyl group fluorescence for the di-ionized ligand with the shortest spacer. A similar effect was noted for the di-ionized ligand with an intermediate spacer for all of the metal ions, except Ba2+. For the di-ionized ligand with the longest spacer, the metal cations showed different effects on the emission spectrum. Li+, Mg2+, Ca2+ and Ba2+ caused enhancement of emission intensity with a red shift. Other metal cations produce quenching with red shifts in the emission spectra. Transition metal cations interacted strongly with all three di-ionized ligands. In particular, Fe3+ and Hg2+ caused greater than 99% quenching of the dansyl fluorescence in the di-ionized ligands.

Effect of para-substituents on alkaline earth metal ion extraction by proton di-ionizable calix[4]arene-crown-6 ligands in cone, partial-cone and 1,3-alternate conformations.

Two carboxylic acid or N-(X)sulfonyl carboxamide groups were incorporated into calix[4]arene-crown-6 compounds to afford di-ionizable ligands for use in divalent metal ion separations. Acidities of the N-(X)sulfonyl carboxamide groups were tuned by variation of the electron-withdrawing properties of X. Cone, partial-cone and 1,3-alternate conformations were obtained by different synthetic strategies and their structures verified by NMR spectroscopy. Competitive solvent extractions of alkaline earth metal cations from aqueous solutions into chloroform were performed and the results compared with those reported previously for di-ionizable p-tert-butylcalix[4]arene-crown-6 analogues to probe the influence of the para-substituent on the calix[4]arene scaffold on extraction selectivity and efficiency.

Di-ionizable p-tert-butylcalix[4]arene-1,2-crown-5 and -crown-6 compounds in the cone conformation: synthesis and alkaline earth metal cation extraction.

Di-ionizable p-tert-butylcalix[4]arene-1,2-crown-5 and -crown-6 ethers in the cone conformation were prepared and their conformations and regioselectivities were verified by NMR spectroscopy. The metal ion-complexing properties of these ligands were evaluated by competitive solvent extractions of alkaline earth metal cations from water into chloroform. The ligands were found to be efficient extractants with selectivity for Ba(2+). The maximal loadings were 95-100% as calculated for formation of 1 : 1 ionized ligand-metal ion complexes. With the variation of proton-ionizable groups, which were oxyacetic acid moieties and N-(X)sulfonyl oxyacetamide units with X = methyl, phenyl, 4-nitrophenyl, and trifluoromethyl, "tunable" acidity was obtained.

Synthesis and alkaline earth metal cation extraction by proton di-ionizable p-tert-butylcalix[4]arene-crown-5 compounds in cone, partial-cone and 1,3-alternate conformations.

Synthetic strategies for novel, proton di-ionizable p-tert-butylcalix[4]arene-crown-5 compounds in cone, partial-cone and 1,3-alternate conformations are reported. Selective linkage of the two diametrical phenolic oxygens in p-tert-butylcalix[4]arene with tetraethylene glycol ditosylate gave 1,3-bridged p-tert-butylcalix[4]arene-crown-5. The two remaining phenolic units were alkylated using NaH and KH as the bases to give the cone and partial-cone conformers, respectively. Preparation of the 1,3-alternate conformers utilized a different sequence in which O-alkylation was followed by crown ether ring formation. Structures of these new ligands were elucidated by (1)H and (13)C NMR spectroscopy. These proton-ionizable ligands were tested for their solvent extraction properties toward alkaline earth metal cations. Surprising differences in their extraction behaviors are noted compared to those reported previously for di-ionizable p-tert-butylcalix[4]arenecrown-6 analogues.

Proton di-ionizable p-tert-butylcalix[4]arene-crown-6 compounds in cone, partial-cone and 1,3-alternate conformations: synthesis and alkaline earth metal cation extraction.

Novel proton di-ionizable p-tert-butylcalix[4]arene-crown-6 compounds in cone, partial-cone and 1,3-alternate conformations are synthesized to compare the efficiency and selectivity with which they extract alkaline earth metal ions. In these ligands, a crown-6 polyether unit links alternate aromatic rings of the calix[4]arene framework. To the remaining lower-rim positions are attached oxyacetic acid or N-(X)sulfonyl oxyacetamide groups. Changing the conformation varies the spatial relationship between a polyether-complexed divalent metal ion and the ionized side arms of the ligands. This is found to markedly affect the efficiency and selectivity in competitive solvent extraction of alkaline earth metal ions from aqueous solutions into chloroform by the di-ionizable calix[4]arene-crown-6 ligands.

Rigid versus flexible: how important is ligand "preorganization" for metal ion recognition by lower rim-functionalized calix[4]arenes?

For an assessment of the outcomes from use of an appropriately "preorganized" calixarene-based ionophore versus its conformationally mobile prototype, solvent extraction propensities of flexible calix[4]arene di-[N-(X-sulfonyl)carboxamides] for alkali, alkaline earth metal cations, Pb2+, Ag+ and Hg2+ are compared with those for seven new rigid analogs fixed in the cone, partial cone and 1,3-alternate conformations. For each of the metal ions, the preferred calix[4]arene conformation was determined from the NMR spectra for the metal salt of the flexible ligand. Except for Ag+, flexible calix[4]arene di-[N-(X-sulfonyl)carboxamides] were found to provide greater metal ion extraction efficiency and better selectivity than the corresponding "preorganized" ionophores.