Carbon Dioxide Capture by Niobium Polyoxometalate Fragmentation.

High oxidation state metal cations in the form of oxides, oxoanions, or oxoperoxoanions have diverse roles in carbon dioxide removal (direct air capture and point source). Features include providing basic oxygens for chemisorption reactions, direct binding of carbonate, and catalyzing low-temperature CO2 release to regenerate capture media. Moreover, metal oxides and aqueous metal-oxo species are stable in harsh, point-source conditions. Here, we demonstrate aqueous niobium polyoxometalate (POM) carbon capture ability, specifically [Nb6O19]8-, Nb6. Upon exposure of aqueous Nb6 to CO2, Nb6 fragments and binds chemisorbed carbonate, evidenced by crystallization of Nb-carbonate POMs including [Nb22O53(CO3)16]28-and [Nb10O25(CO3)6]12-. While Rb/Cs+ counter cations yield crystal structures to understand the chemisorption processes, K+ counter cations enable higher capture efficiency (based on CO3/Nb ratio), determined by CHN analysis and thermogravimetry-mass spectrometry of the isolated solids. Sum frequency generation spectroscopy also showed higher carbon capture efficiency of the K-Nb6 solutions at the air-water interface, while small-angle X-ray scattering (SAXS) provided insights into the role of the alkalis in influencing these processes. Tetramethylammonium counter cations, like K+, demonstrate high efficiency of carbonate chemisorption at the interface, but SAXS and Raman of the bulk showed a predominance of a Nb24-POM (HxNb24O72, x ∼ 9) that does not bind carbonate. Control experiments show that carbonate detected at the interface is Nb-bound, and the Nb-carbonate species are stabilized by alkalis, demonstrating their supporting role in aqueous Nb-POM CO2 chemisorption. Of fundamental importance, this study presents rare examples of directing POM speciation with a gas, instead of liquid phase acid or base.

Accessing Mg-Ion Storage in V2PS10 via Combined Cationic-Anionic Redox with Selective Bond Cleavage.

Magnesium batteries attract interest as alternative energy-storage devices because of elemental abundance and potential for high energy density. Development is limited by the absence of suitable cathodes, associated with poor diffusion kinetics resulting from strong interactions between Mg2+ and the host structure. V2PS10 is reported as a positive electrode material for rechargeable magnesium batteries. Cyclable capacity of 100 mAh g-1 is achieved with fast Mg2+ diffusion of 7.2 × ${\times }$ 10-11-4 × ${\times }$ 10-14 cm2 s-1. The fast insertion mechanism results from combined cationic redox on the V site and anionic redox on the (S2)2- site; enabled by reversible cleavage of S-S bonds, identified by X-ray photoelectron and X-ray absorption spectroscopy. Detailed structural characterisation with maximum entropy method analysis, supported by density functional theory and projected density of states analysis, reveals that the sulphur species involved in anion redox are not connected to the transition metal centres, spatially separating the two redox processes. This facilitates fast and reversible Mg insertion in which the nature of the redox process depends on the cation insertion site, creating a synergy between the occupancy of specific Mg sites and the location of the electrons transferred.

Three Phases of Basic Zirconium and Hafnium Hydroxohalides.

Aqueous solutions of zirconium and hafnium (M) halides (X) with atomic ratios α = X/M near 1 form glasses on evaporation. Herein, we describe the preparation and properties of these glasses and discuss the nature of the crystal-glass equilibria beyond the pure glass compositions. Small- and wide-angle X-ray scattering (SWAXS) studies reveal increased polymerization as α decreases from 2 to 1. The glasses are found to be much denser than their crystalline counterparts. Crystals forming in contact with glasses retain the well-known Zr-tetrameric hydroxo cluster unit with hydroxide compensating for the lowered halide content. We find that the chemical formulas for all of the solid hydroxohalides may be described by the single parameter α, according to the formula M(OH)4-αXα·(4α - 1)H2O. This description is valid for the crystalline chloride (MOX2·8H2O = M(OH)2X2·7H2O), the glassy solids with α < 2, and hydrolyzed products (α ≈ 0.5). The water content is also determined by α with hydroxide-hydrogen bonding replacing halide-hydrogen bonding as α decreases. A Eu3+-doped Zr,Cl glass exhibits photoluminescence transitions 5D0 → 7Fn (n = 1, 2, and 4) of Eu3+, illustrating the asymmetric nature of the dopant sites in the glass.

Synthesis, Structure, and Heat Capacity of Some Basic Hydroxohalide Glasses of Zirconium and Hafnium.

This work highlights the synthesis and properties of novel basic hydroxohalide glasses of zirconium and hafnium. The hydroxohalide glasses are M(OH)4-αXα·(n)H2O where M represents either zirconium or hafnium, and X represents either chloride or bromide. The chemical structure is investigated using X-ray diffraction, total scattering, and the pair distribution function method to identify the local structure and any short-range connectivity. The thermodynamic properties of the glasses are probed using low-temperature heat capacity, where a gap in the phonon density of states is discussed and related to boson peaks in the heat capacity of the glasses. These results represent the first published synthesis and thermodynamic properties of zirconium and hafnium basic hydroxohalide glasses. Synthesis methods, structural determination, and analysis of the heat capacity data allow for a comprehensive look at the makeup and unique properties of these novel glassy materials. Values of the standard thermodynamic functions Cp,m°, Δ0TSm°, Δ0THm°, and Φm° are also reported.

Evolution of Short-Range Order of Amorphous GeTe Upon Structural Relaxation Obtained by TEM Diffractometry and RMC Methods.

Glasses frequently reveal structural relaxation that leads to changes in their physical properties including enthalpy, specific volume, and resistivity. Analyzing the short-range order (SRO) obtained from electron diffraction by transmission electron microscopy (TEM) in combination with Reverse-Monte-Carlo (RMC) simulations is shown to provide information on the atomic arrangement. The technique elaborated here features several benefits including reliability, accessibility, and allows for obtaining detailed structural data quickly. This is demonstrated with a detailed view of the structural changes in the as-deposited amorphous phase change material (PCM) GeTe. The data show a significant increase in the average bond angle upon thermal treatment. At the same time the fraction of tetrahedrally coordinated Ge atoms decreases due to an increase in octahedrally distorted and pyramidal motifs. This finding provides further evidence for the atomic processes that govern structural relaxation in amorphous GeTe and other PCMs. A thorough literature review finally unveils possible origins of the large discrepancies reported on the structure of amorphous GeTe.

Ordered Oxygen Vacancies in the Lithium-Rich Oxide Li4CuSbO5.5, a Triclinic Structure Type Derived from the Cubic Rocksalt Structure.

Li-rich rocksalt oxides are promising candidates as high-energy density cathode materials for next-generation Li-ion batteries because they present extremely diverse structures and compositions. Most reported materials in this family contain as many cations as anions, a characteristic of the ideal cubic closed-packed rocksalt composition. In this work, a new rocksalt-derived structure type is stabilized by selecting divalent Cu and pentavalent Sb cations to favor the formation of oxygen vacancies during synthesis. The structure and composition of the oxygen-deficient Li4CuSbO5.5□0.5 phase is characterized by combining X-ray and neutron diffraction, ICP-OES, XAS, and magnetometry measurements. The ordering of cations and oxygen vacancies is discussed in comparison with the related Li2CuO2□1 and Li5SbO5□1 phases. The electrochemical properties of this material are presented, with only 0.55 Li+ extracted upon oxidation, corresponding to a limited utilization of cationic and/or anionic redox, whereas more than 2 Li+ ions can be reversibly inserted upon reduction to 1 V vs Li+/Li, a large capacity attributed to a conversion reaction and the reduction of Cu2+ to Cu0. Control of the formation of oxygen vacancies in Li-rich rocksalt oxides by selecting appropriate cations and synthesis conditions affords a new route for tuning the electrochemical properties of cathode materials for Li-ion batteries. Furthermore, the development of material models of the required level of detail to predict phase diagrams and electrochemical properties, including oxygen release in Li-rich rocksalt oxides, still relies on the accurate prediction of crystal structures. Experimental identification of new accessible structure types stabilized by oxygen vacancies represents a valuable step forward in the development of predictive models.

Li6SiO4Cl2: A Hexagonal Argyrodite Based on Antiperovskite Layer Stacking.

A hexagonal analogue, Li6SiO4Cl2, of the cubic lithium argyrodite family of solid electrolytes is isolated by a computation-experiment approach. We show that the argyrodite structure is equivalent to the cubic antiperovskite solid electrolyte structure through anion site and vacancy ordering within a cubic stacking of two close-packed layers. Construction of models that assemble these layers with the combination of hexagonal and cubic stacking motifs, both well known in the large family of perovskite structural variants, followed by energy minimization identifies Li6SiO4Cl2 as a stable candidate composition. Synthesis and structure determination demonstrate that the material adopts the predicted lithium site-ordered structure with a low lithium conductivity of ∼10-10 S cm-1 at room temperature and the predicted hexagonal argyrodite structure above an order-disorder transition at 469.3(1) K. This transition establishes dynamic Li site disorder analogous to that of cubic argyrodite solid electrolytes in hexagonal argyrodite Li6SiO4Cl2 and increases Li-ion mobility observed via NMR and AC impedance spectroscopy. The compositional flexibility of both argyrodite and perovskite alongside this newly established structural connection, which enables the use of hexagonal and cubic stacking motifs, identifies a wealth of unexplored chemistry significant to the field of solid electrolytes.

One Site, Two Cations, Three Environments: s2 and s0 Electronic Configurations Generate Pb-Free Relaxor Behavior in a Perovskite Oxide.

The piezoelectric devices widespread in society use noncentrosymmetric Pb-based oxides because of their outstanding functional properties. The highest figures of merit reported are for perovskites based on the parent Pb(Mg1/3Nb2/3)O3 (PMN), which is a relaxor: a centrosymmetric material with local symmetry breaking that enables functional properties, which resemble those of a noncentrosymmetric material. We present the Pb-free relaxor (K1/2Bi1/2)(Mg1/3Nb2/3)O3 (KBMN), where the thermal and (di)electric behavior emerges from the discrete structural roles of the s0 K+ and s2 Bi3+ cations occupying the same A site in the perovskite structure, as revealed by diffraction methods. This opens a distinctive route to Pb-free piezoelectrics based on relaxor parents, which we demonstrate in a solid solution of KBMN with the Pb-free ferroelectric (K1/2Bi1/2)TiO3, where the structure and function evolve together, revealing a morphotropic phase boundary, as seen in PMN-derived systems. The detailed multiple-length-scale understanding of the functional behavior of KBMN suggests that precise chemical manipulation of the more diverse local displacements in the Pb-free relaxor will enhance performance.

Computationally Guided Discovery of the Sulfide Li3AlS3 in the Li-Al-S Phase Field: Structure and Lithium Conductivity.

With the goal of finding new lithium solid electrolytes by a combined computational-experimental method, the exploration of the Li-Al-O-S phase field resulted in the discovery of a new sulfide Li3AlS3. The structure of the new phase was determined through an approach combining synchrotron X-ray and neutron diffraction with 6Li and 27Al magic-angle spinning nuclear magnetic resonance spectroscopy and revealed to be a highly ordered cationic polyhedral network within a sulfide anion hcp-type sublattice. The originality of the structure relies on the presence of Al2S6 repeating dimer units consisting of two edge-shared Al tetrahedra. We find that, in this structure type consisting of alternating tetrahedral layers with Li-only polyhedra layers, the formation of these dimers is constrained by the Al/S ratio of 1/3. Moreover, by comparing this structure to similar phases such as Li5AlS4 and Li4.4Al0.2Ge0.3S4 ((Al + Ge)/S = 1/4), we discovered that the AlS4 dimers not only influence atomic displacements and Li polyhedral distortions but also determine the overall Li polyhedral arrangement within the hcp lattice, leading to the presence of highly ordered vacancies in both the tetrahedral and Li-only layer. AC impedance measurements revealed a low lithium mobility, which is strongly impacted by the presence of ordered vacancies. Finally, a composition-structure-property relationship understanding was developed to explain the extent of lithium mobility in this structure type.

Insights on the Proton Insertion Mechanism in the Electrode of Hexagonal Tungsten Oxide Hydrate.

This study reveals the transport behavior of lattice water during proton (de)insertion in the structure of the hexagonal WO3·0.6H2O electrode. By monitoring the mass evolution of this electrode material via electrochemical quartz crystal microbalance, we discovered (1) WO3·0.6H2O incorporates additional lattice water when immersing in the electrolyte at open circuit voltage and during initial cycling; (2) The reductive proton insertion in the WO3 hydrate is a three-tier process, where in the first stage 0.25 H+ is inserted per formula unit of WO3 while simultaneously 0.25 lattice water is expelled; then in the second stage 0.30 naked H+ is inserted, followed by the third stage with 0.17 H3O+ inserted per formula unit. Ex situ XRD reveals that protonation of the WO3 hydrate causes consecutive anisotropic structural changes: it first contracts along the c-axis but later expands along the ab planes. Furthermore, WO3·0.6H2O exhibits impressive cycle life over 20 000 cycles, together with appreciable capacity and promising rate performance.