Facile Approach for Metallic Precursor Engineering for Efficient Kesterite Thin-Film Solar Cells.

Kesterite-based Cu2ZnSn(S,Se)4 (CZTSSe) thin-film solar cells (TFSCs) are a promising candidate for low-cost, clean energy production owing to their environmental friendliness and the earth-abundant nature of their constituents. However, the advancement of kesterite TFSCs has been impeded by abundant defects and poor microstructure, limiting their performance potential. In this study, we present efficient Ag-alloyed CZTSSe TFSCs enabled by a facile metallic precursor engineering approach. The positioning of the Ag nanolayer in the metallic stacked precursor proves crucial in expediting the formation of Cu-Sn metal alloys during the alloying process. Specifically, Ag-included metallic precursors promote the growth of larger grains and a denser microstructure in CZTSSe thin films compared to those without Ag. Moreover, the improved uniformity of Ag, facilitated by the evaporation deposition technique, significantly suppresses the formation of detrimental defects and related defect clusters. This suppression effectively reduces nonradiative recombination, resulting in enhanced performance in kesterite TFSCs. This study not only introduces a metallic precursor engineering strategy for efficient kesterite-based TFSCs but also accelerates the development of microstructure evolution from metallic stacked precursors to metal chalcogenide compounds.

Rapid Synthesis of Ultrathin Ni:FeOOH with In Situ-Induced Oxygen Vacancies for Enhanced Water Oxidation Activity and Stability of BiVO4 Photoanodes.

The coupling of oxygen evolution reaction (OER) catalysts with photoanodes is a promising strategy for enhancing the photoelectrochemical (PEC) performance by passivating photoanode's surface defect states and facilitating charge transfer at the photoanode/electrolyte interface. However, a serious interface recombination issue caused by poor interface and OER catalysts coating quality often limits further performance improvement of photoanodes. Herein, a rapid Fenton-like reaction method is demonstrated to produce ultrathin amorphous Ni:FeOOH catalysts with in situ-induced oxygen vacancies (Vo) to improve the water oxidation activity and stability of BiVO4 photoanodes. The combined physical characterizations, PEC studies, and density functional theory calculations revealed that the reductive environment in a Fenton-like reaction in situ produces abundant Vo in Ni:FeOOH catalysts, which significantly improves charge separation and charge transfer efficiency of BiVO4 while also offering abundant active sites and a reduced energy barrier for OER. As a result, Ni:FeOOH-Vo catalysts yielded a more than 2-fold increased photocurrent density in the BiVO4 photoanode (from 1.54 to 4.15 mA cm-2 at 1.23 VRHE), accompanied by high stability for 5 h. This work not only highlights the significance of abundant Vo in catalysts but also provides new insights into the rational design and fabrication of efficient and stable solar water-splitting systems.

Emerging Chalcohalide Materials for Energy Applications.

Semiconductors with multiple anions currently provide a new materials platform from which improved functionality emerges, posing new challenges and opportunities in material science. This review has endeavored to emphasize the versatility of the emerging family of semiconductors consisting of mixed chalcogen and halogen anions, known as "chalcohalides". As they are multifunctional, these materials are of general interest to the wider research community, ranging from theoretical/computational scientists to experimental materials scientists. This review provides a comprehensive overview of the development of emerging Bi- and Sb-based as well as a new Cu, Sn, Pb, Ag, and hybrid organic-inorganic perovskite-based chalcohalides. We first highlight the high-throughput computational techniques to design and develop these chalcohalide materials. We then proceed to discuss their optoelectronic properties, band structures, stability, and structural chemistry employing theoretical and experimental underpinning toward high-performance devices. Next, we present an overview of recent advancements in the synthesis and their wide range of applications in energy conversion and storage devices. Finally, we conclude the review by outlining the impediments and important aspects in this field as well as offering perspectives on future research directions to further promote the development of chalcohalide materials in practical applications in the future.

Emerging Surface, Bulk, and Interface Engineering Strategies on BiVO4 for Photoelectrochemical Water Splitting.

The photoelectrochemical (PEC) cell that collects and stores abundant sunlight to hydrogen fuel promises a clean and renewable pathway for future energy needs and challenges. Monoclinic bismuth vanadate (BiVO4 ), having an earth-abundancy, nontoxicity, suitable optical absorption, and an ideal n-type band position, has been in the limelight for decades. BiVO4 is a potential photoanode candidate due to its favorable outstanding features like moderate bandgap, visible light activity, better chemical stability, and cost-effective synthesis methods. However, BiVO4 suffers from rapid recombination of photogenerated charge carriers that have impeded further improvements of its PEC performances and stability. This review presents a close look at the emerging surface, bulk, and interface engineering strategies on BiVO4 photoanode. First, an effective approach of surface functionalization via different cocatalysts to improve the surface kinetics of BiVO4 is discussed. Second, state-of-the-art methodologies such as nanostructuring, defect engineering, and doping to further enhance light absorption and photogenerated charge transport in bulk BiVO4 are reviewed. Third, interface engineering via heterostructuring to improve charge separation is introduced. Lastly, perspectives on the foremost challenges and some motivating outlooks to encourage the future research progress in this emerging frontier are offered.

Kesterite Solar Cells: Insights into Current Strategies and Challenges.

Earth-abundant and environmentally benign kesterite Cu2ZnSn(S,Se)4 (CZTSSe) is a promising alternative to its cousin chalcopyrite Cu(In,Ga)(S,Se)2 (CIGS) for photovoltaic applications. However, the power conversion efficiency of CZTSSe solar cells has been stagnant at 12.6% for years, still far lower than that of CIGS (23.35%). In this report, insights into the latest cutting-edge strategies for further advance in the performance of kesterite solar cells is provided, particularly focusing on the postdeposition thermal treatment (for bare absorber, heterojunction, and completed device), alkali doping, and bandgap grading by engineering graded cation and/or anion alloying. These strategies, which have led to the step-change improvements in the power conversion efficiency of the counterpart CIGS solar cells, are also the most promising ones to achieve further efficiency breakthroughs for kesterite solar cells. Herein, the recent advances in kesterite solar cells along these pathways are reviewed, and more importantly, a comprehensive understanding of the underlying mechanisms is provided, and promising directions for the ongoing development of kesterite solar cells are proposed.

A Facile Process for Partial Ag Substitution in Kesterite Cu2ZnSn(S,Se)4 Solar Cells Enabling a Device Efficiency of over 12.

A cation substitution in Cu2ZnSn(S,Se)4 (CZTSSe) offers a viable strategy to reduce the open-circuit voltage (Voc)-deficit by altering the characteristics of band-tail states, antisite defects, and related defect clusters. Herein, we report a facile single process, i.e., simply introducing a thin Ag layer on a metallic precursor, to effectively improve the device characteristics and performances in kesterite (Agx,Cu1-x)2ZnSn(Sy,Se1-y)4 (ACZTSSe) solar cells. Probing into the relationship between the external quantum efficiency derivative (dEQE/dλ) and device performances revealed the Voc-deficit characteristics in the ACZTSSe solar cells as a function of Cu and Ag contents. The fabricated champion ACZTSSe solar cell device showed an efficiency of 12.07% and a record low Voc-deficit of 561 mV. Thorough investigations into the mechanism underpinning the improved performance in the ACZTSSe device further revealed the improved band-tailing characteristic, effective minority carrier lifetime, and diode factors as well as reduced antisite defects and related defect clusters as compared to the CZTSSe device. This study demonstrates the feasibility of effectively suppressing antisite defects, related defect clusters, and band-tailing characteristics by simply introducing a thin Ag layer on a metallic precursor in the kesterite solar cells, which in turn effectively reduces the Voc-deficit.

8% Efficiency Cu2ZnSn(S,Se)4 (CZTSSe) Thin Film Solar Cells on Flexible and Lightweight Molybdenum Foil Substrates.

The use of flexible and highly conducting molybdenum (Mo) foil as a substrate offers several advantages such as a high thermal stability, smooth surface, and chemical inertness for the fabrication of high-efficiency thin film solar cells (TFSCs) by lowering the manufacturing costs. Here, we report a record preliminary efficiency of ∼8% for sputtered-grown Cu2ZnSn(S,Se)4 (CZTSSe) TFSCs on flexible and lightweight Mo foils. Careful studies were focused on identifying the role of preparative parameters such as annealing temperature, absorber composition, and post-preparative optimization to bridge the obtained record efficiency of ∼8% to a previous record efficiency of 7.04% for Na-incorporated CZTSSe sputter-based TFSCs. Interestingly, the preliminary record efficiency of ∼8% for our CZTSSe device grown via a scalable sputtering method was achieved by optimizing the absorber quality and post-preparative device optimization. While our preliminary results with a record efficiency demonstrate the potential of sputtering method, there is much scope for further improvement in the device efficiency by thoroughly understanding alkali element doping in the absorber layer.

Band Tail Engineering in Kesterite Cu2ZnSn(S,Se)4 Thin-Film Solar Cells with 11.8% Efficiency.

Herein, we report a facile process, i.e., controlling the initial chamber pressure during the postdeposition annealing, to effectively lower the band tail states in the synthesized CZTSSe thin films. Through detailed analysis of the external quantum efficiency derivative ( dEQE/ dλ) and low-temperature photoluminescence (LTPL) data, we find that the band tail states are significantly influenced by the initial annealing pressure. After carefully optimizing the deposition processes and device design, we are able to synthesize kesterite CZTSSe thin films with energy differences between inflection of d(EQE)/dλ and LTPL as small as 10 meV. These kesterite CZTSSe thin films enable the fabrication of solar cells with a champion efficiency of 11.8% with a low Voc deficit of 582 mV. The results suggest that controlling the annealing process is an effective approach to reduce the band tail in kesterite CZTSSe thin films.

Facile, Room Temperature, Electroless Deposited (Fe1-x, Mnx )OOH Nanosheets as Advanced Catalysts: The Role of Mn Incorporation.

Herein, bimetallic iron (Fe)-manganese (Mn) oxyhydroxide ((Fe1-x, Mnx )OOH, FeMnOOH) nanosheets on fluorine-doped tin oxide conducting substrates and on semiconductor photoanodes are synthesized by a facile, room temperature, electroless deposition method as catalysts for both electrochemical and photo-electrochemical (PEC) water splitting, respectively. Surprisingly, Mn-doped FeOOH can significantly modulate the nanosheet morphology to increase the active surface area, boost more active sites, and augment the intrinsic activity by tuning the electronic structure of FeOOH. Due to the 2D nanosheet architecture, the optimized FeMnOOH exhibits superior electrochemical activity and outstanding durability for the oxygen evolution reaction with a low overpotential of 246 mV at 10 mA cm-2 and 414 mV at 100 mA cm-2 , and long-term stability for 40 h without decay, which is comparable to the best electrocatalysts for water oxidation reported in the literature. By integrating with semiconductor photoanodes (such as α-Fe2 O3 nanorod (NR) arrays), bimetallic FeMnOOH catalysts achieve solar-driven water splitting with a significantly enhanced PEC performance (3.36 mA cm-2 at 1.23 V vs reversible hydrogen electrode (RHE)) with outstanding long-term stability (≈8 h) compared to that of the bare Fe2 O3 NR (0.92 mA cm-2 at 1.23 V vs RHE).

Symmetric supercapacitor: Sulphurized graphene and ionic liquid.

Symmetric supercapacitor is advanced over simple supercapacitor device due to their stability over a large potential window and high energy density. Graphene is a desired candidate for supercapacitor application since it has a high surface area, good electronic conductivity and high electro chemical stability. There is a pragmatic use of ionic liquid electrolyte for supercapacitor due to its stability over a large potential window, good ionic conductivity and eco-friendly nature. For high performance supercapacitor, the interaction between ionic liquid electrolyte and graphene are crucial for better charge transportation. In respect of this, a three-dimensional (3D) nanoporous honeycomb shaped sulfur embedded graphene (S-graphene) has been synthesized by simple chemical method. Here, the fabrication of high performance symmetric supercapacitor is done by using S-graphene as an electrode and [BMIM-PF6] as an electrolyte. The particular architecture of S-graphene benefited to reduce the ion diffusion resistance, providing the large surface area for charge transportation and efficient charge storage. The S-graphene and ionic liquid-based symmetric supercapacitor device showed the large potential window of 3.2 V with high energy density 124 Wh kg-1 at 0.2 A g-1 constant applied current density. Furthermore, this device shows good cycling performance (stability) with a capacitive retention of 95% over 20,000 cycles at a higher current density of 2 A g-1.

Chemically Deposited CdS Buffer/Kesterite Cu2ZnSnS4 Solar Cells: Relationship between CdS Thickness and Device Performance.

Earth-abundant, copper-zinc-tin-sulfide (CZTS), kesterite, is an attractive absorber material for thin-film solar cells (TFSCs). However, the open-circuit voltage deficit (Voc-deficit) resulting from a high recombination rate at the buffer/absorber interface is one of the major challenges that must be overcome to improve the performance of kesterite-based TFSCs. In this paper, we demonstrate the relationship between device parameters and performances for chemically deposited CdS buffer/CZTS-based heterojunction TFSCs as a function of buffer layer thickness, which could change the CdS/CZTS interface conditions such as conduction band or valence band offsets, to gain deeper insight and understanding about the Voc-deficit behavior from a high recombination rate at the CdS buffer/kesterite interface. Experimental results show that device parameters and performances are strongly dependent on the CdS buffer thickness. We postulate two meaningful consequences: (i) Device parameters were improved up to a CdS buffer thickness of 70 nm, whereas they deteriorated at a thicker CdS buffer layer. The Voc-deficit in the solar cells improved up to a CdS buffer thickness of 92 nm and then deteriorated at a thicker CdS buffer layer. (ii) The minimum values of the device parameters were obtained at 70 nm CdS thickness in the CZTS TFSCs. Finally, the highest conversion efficiency of 8.77% (Voc: 494 mV, Jsc: 34.54 mA/cm2, and FF: 51%) is obtained by applying a 70 nm thick CdS buffer to the Cu2ZnSn(S,Se)4 absorber layer.

Aqueous-Solution-Processed Cu2ZnSn(S,Se)4 Thin-Film Solar Cells via an Improved Successive Ion-Layer-Adsorption-Reaction Sequence.

A facile improved successive ionic-layer adsorption and reaction (SILAR) sequence is described for the fabrication of Cu2ZnSn(S,Se)4 (CZTSSe) thin-film solar cells (TFSCs) via the selenization of a precursor film. The precursor films were fabricated using a modified SILAR sequence to overcome compositional inhomogeneity due to different adsorptivities of the cations (Cu+, Sn4+, and Zn2+) in a single cationic bath. Rapid thermal annealing of the precursor films under S and Se vapor atmospheres led to the formation of carbon-free Cu2ZnSnS4 (CZTS) and CZTSSe absorber layers, respectively, with single large-grained layers. The best devices based on CZTS and CZTSSe absorber layers showed total area (∼0.30 cm2) power conversion efficiencies (PCEs) of 1.96 and 3.74%, respectively, which are notably the first-demonstrated efficiencies using a modified SILAR sequence. Detailed diode analyses of these solar cells revealed that a high shunt conductance (G sh), reverse saturation current density (J o), and ideality factor (n d) significantly affected the PCE, open-circuit voltage (V oc), and fill factor (FF), whereas the short-circuit current density (J sc) was dominated by the series resistance (R s) and G sh. However, the diode analyses combined with the compositional and interface microstructural analyses shed light on further improvements to the device efficiency. The facile layer-by-layer growth of the kesterite CZTS-based thin films in aqueous solution provides a great promise as an environmentally benign pathway to fabricate a variety of multielement-component compounds with high compositional homogeneities.

A Simple Aqueous Precursor Solution Processing of Earth-Abundant Cu2SnS3 Absorbers for Thin-Film Solar Cells.

A simple and eco-friendly method of solution processing of Cu2SnS3 (CTS) absorbers using an aqueous precursor solution is presented. The precursor solution was prepared by mixing metal salts into a mixture of water and ethanol (5:1) with monoethanolamine as an additive at room temperature. Nearly carbon-free CTS films were formed by multispin coating the precursor solution and heat treating in air followed by rapid thermal annealing in S vapor atmosphere at various temperatures. Exploring the role of the annealing temperature in the phase, composition, and morphological evolution is essential for obtaining highly efficient CTS-based thin film solar cells (TFSCs). Investigations of CTS absorber layers annealed at various temperatures revealed that the annealing temperature plays an important role in further improving device properties and efficiency. A substantial improvement in device efficiency occurred only at the critical annealing temperature, which produces a compact and void-free microstructure with large grains and high crystallinity as a pure-phase absorber layer. Finally, at an annealing temperature of 600 °C, the CTS thin film exhibited structural, compositional, and microstructural isotropy by yielding a reproducible power conversion efficiency of 1.80%. Interestingly, CTS TFSCs exhibited good stability when stored in an air atmosphere without encapsulation at room temperature for 3 months, whereas the performance degraded slightly when subjected to accelerated aging at 80 °C for 100 h under normal laboratory conditions.

Wurtzite CZTS nanocrystals and phase evolution to kesterite thin film for solar energy harvesting.

A quaternary indium- and gallium-free kesterite (KS)-based compound, copper zinc tin sulfide (Cu2ZnSnS4, CZTS), has received significant attention for its potential applications in low cost and sustainable solar cells. It is well known that the reaction time, reactivity of the precursors, and types of capping ligands used during the synthesis of colloidal nanocrystals (NCs) strongly influence the crystallographic phase of the NCs. In this research, a non-toxic and green synthetic strategy for both the synthesis of CZTS NCs and the fabrication of a highly efficient CZTS absorber layers using an ink formulation without a toxic solvent, which meets the comprehensive framework for green chemistry that covers major aspects of the environmental strain, is demonstrated. In particular, pure metastable wurtzite (WZ) CZTS NCs are synthesized using the environmentally harmless, polyol mediated hot-injection (HI) technique at a low reaction temperature. The influence of the reaction time on the properties of the CZTS NCs is investigated in detail. Based on detailed reaction time dependent phase evolution, a possible growth and formation mechanism is proposed. Furthermore, a scalable, low cost, binder free ink formulation process without ligand exchange is developed using ethanol as the dispersal solvent. The as-prepared WZ-derived CZTS NC thin films are observed to undergo a phase transformation to KS during annealing in a sulfur vapor atmosphere via rapid thermal annealing above 500 °C, and surprisingly, this process results in fully sintered, compact and uniform CZTS thin films with large sized grains. The best solar cell device fabricated using a CZTS absorber that was sulfurized at an optimized temperature exhibits a power conversion efficiency of 2.44%, which is the highest efficiency obtained using the polyol-based HI route.