Kinetic and donor stabilization of organotellurenyl iodides and azides.

The first tellurium compounds containing the extremely bulky tris(phenyldimethylsilyl)methyl (Tpsi) and 2,6-bis(2,4,6-triisopropylphenyl)phenyl (2,6-Trip(2)C(6)H(3)) moieties have been synthesized and isolated. Careful oxidation of the tellurolate TpsiTeLi (1) resulted in the formation of the crowded ditellane (TpsiTe)(2) (2), and iodination of 2 gave the alkanetellurenyl iodide TpsiTeI (3). In a similar fashion, the terphenyl-substituted ditellane (2,6-Trip(2)C(6)H(3)Te)(2) (9) and the arenetellurenyl iodide 2,6-Trip(2)C(6)H(3)TeI (10) were prepared. Reaction of the iodides TpsiTeI (3) and 2,6-Trip(2)C(6)H(3)TeI (10), as well as TripTeI, MesTeI (Trip = 2,4,6-triisopropylphenyl, Mes = 2,4,6-tri-tert-butylphenyl), and the donor-stabilized 2-Me(2)NCH(2)C(6)H(4)TeI, with AgN(3) resulted in the formation and isolation of the corresponding tellurenyl azides TpsiTeN(3) (4), TripTeN(3) (7), MesTeN(3) (8), 2,6-Trip(2)C(6)H(3)TeN(3) (11), and 2-Me(2)NCH(2)C(6)H(4)TeN(3) (12). Furthermore, the corresponding tris(ethyldimethylsilyl)methyl-containing (Tesi) tellurium compounds (TesiTe)(2), TesiTeI (5), and TesiTeN(3) (6) have been prepared but could not be isolated in pure form. The crystal structures of TpsiTeLi (1), (TpsiTe)(2) (2), TpsiTeN(3) (4), 2,6-Trip(2)C(6)H(3)TeI (10), 2,6-Trip(2)C(6)H(3)TeN(3) (11), and 2-Me(2)NCH(2)C(6)H(4)TeN(3) (12) have been determined by X-ray diffraction. Additionally, computational studies of the molecules for which experimental structural data were available were performed.

Derivatives of 1,5-diamino-1H-tetrazole: a new family of energetic heterocyclic-based salts.

1,5-Diamino-1H-tetrazole (2, DAT) can easily be protonated by reaction with strong mineral acids, yielding the poorly investigated 1,5-diaminotetrazolium nitrate (2a) and perchlorate (2b). A new synthesis for 2 is introduced that avoids lead azide as a hazardous byproduct. The reaction of 1,5-diamino-1H-tetrazole with iodomethane (7a) followed by the metathesis of the iodide (7a) with silver nitrate (7b), silver dinitramide (7c), or silver azide (7d) leads to a new family of heterocyclic-based salts. In all cases, stable salts were obtained and fully characterized by vibrational (IR, Raman) spectroscopy, multinuclear NMR spectroscopy, mass spectrometry, elemental analysis, X-ray structure determination, and initial safety testing (impact and friction sensitivity). Most of the salts exhibit good thermal stabilities, and both the perchlorate (2b) and the dinitramide (7c) have melting points well below 100 degrees C, yet high decomposition onsets, defining them as new (7c), highly energetic ionic liquids. Preliminary sensitivity testing of the crystalline compounds indicates rather low impact sensitivities for all compounds, the highest being that of the perchlorate (2b) and the dinitramide (7c) with a value of 7 J. In contrast, the friction sensitivities of the perchlorate (2b, 60 N) and the dinitramide (7c, 24 N) are relatively high. The enthalpies of combustion (Delta(c)H degrees ) of 7b-d were determined experimentally using oxygen bomb calorimetry: Delta(c)H degrees (7b) = -2456 cal g(-)(1), Delta(c)H degrees (7c) = -2135 cal g(-)(1), and Delta(c)H degrees (7d) = -3594 cal g(-)(1). The standard enthalpies of formation (Delta(f)H degrees ) of 7b-d were obtained on the basis of quantum chemical computations using the G2 (G3) method: Delta(f)H degrees (7b) = 41.7 (41.2) kcal mol(-)(1), Delta(f)H degrees (7c) = 92.1 (91.1) kcal mol(-)(1), and Delta(f)H degrees (7d) = 161.6 (161.5) kcal mol(-)(1). The detonation velocities (D) and detonation pressures (P) of 2b and 7b-d were calculated using the empirical equations of Kamlet and Jacobs: D(2b) = 8383 m s(-)(1), P(2b) = 32.2 GPa; D(7b) = 7682 m s(-)(1), P(7b) = 23.4 GPa; D(7c) = 8827 m s(-)(1), P(7c) = 33.6 GPa; and D(7d) = 7405 m s(-)(1), P(7d) = 20.8 GPa. For all compounds, a structure determination by single-crystal X-ray diffraction was performed. 2a and 2b crystallize in the monoclinic space groups C2/c and P2(1)/n, respectively. The salts of 7 crystallize in the orthorhombic space groups Pna2(1) (7a, 7d) and Fdd2 (7b). The hydrogen-bonded ring motifs are discussed in the formalism of graph-set analysis of hydrogen-bond patterns and compared in the case of 2a, 2b, and 7b.

First structurally characterized actinide isocyanates.

The synthesis and characterization of the neutral uranylisocyanate UO(2)(NCO)(2)(OP(NMe(2))(3))(2) [crystal data: monoclinic, P2(1)/c, a = 8.512(2) A, b = 10.931(2) A, c = 14.329(3) A, beta = 103.923(3) degrees , V = 1294.0(4) A(3), Z = 2] and isocyanato uranate (Et(4)N)(6)[(UO(2))(2)(NCO)(5)O](2) x 2CH(3)CN x H(2)O [crystal data: monoclinic, P2(1)/c, a = 17.2787(2) A, b = 15.560(1) A, c = 32.7619(4) A, beta = 94.0849(5) degrees , V = 8786.5(2) A(3), Z = 4] are reported. Not only are these compounds the first unambiguously characterized uranium isocyanates regardless of the oxidation state for uranium, but they are also the first structurally characterized actinide isocyanates. Both compounds show coordination of the OCN moiety through nitrogen to uranium and were characterized using IR and (1)H, (13)C, (14)N, and (31)P NMR spectroscopy and X-ray diffraction.

Synthesis and characterization of heavier dioxouranium(VI) dihalides.

The synthesis and characterization of the dioxouranium(VI) dibromide and iodide hydrates, UO(2)Br(2)x3H(2)O (1), [UO(2)Br(2)(OH(2))(2)](2) (2), and UO(2)I(2)x2H(2)Ox4Et(2)O (3), are reported. Moreover, adducts of UO(2)I(2) and UO(2)Br(2) with large, bulky OP(NMe(2))(3) and OPPh(3) ligands such as UO(2)I(2)(OP(NMe(2))(3))(2) (4), UO(2)Br(2)(OP(NMe(2))(3))(2) (5), and UO(2)I(2)(OPPh(3))(2)(6) are discussed. The structures of the following compounds were determined using single-crystal X-ray diffraction techniques: (1) monoclinic, P2(1)/c, a = 9.7376(8) A, b = 6.5471(5) A, c = 12.817(1) A, beta = 94.104(1) degrees , V = 815.0(1) A(3), Z = 4; (2) monoclinic, P2(1)/c, a = 6.0568(7) A, b = 10.5117(9) A, c = 10.362(1) A, beta = 99.62(1) degrees , V = 650.5(1) A(3), Z = 2; (4) tetragonal, P4(1)2(1)2, a = 10.6519(3) A, b = 10.6519(3) A, c = 24.0758(6) A, V = 2731.7(1) A(3), Z = 4; (5) tetragonal, P4(1)2(1)2, a = 10.4645(1) A, b = 10.4645(1) A, c = 23.7805(3) A, V = 2604.10(5) A(3), Z = 4, and (6) monoclinic, P2(1)/c, a = 9.6543(1) A, b = 18.8968(3) A, c = 10.9042(2) A, beta =115.2134(5) degrees , V = 1783.01(5) A(3), Z = 2. Whereas 1 and 2 are the first UO(2)Br(2) hydrates and the last missing members of the UO(2)X(2) hydrate (X = Cl --> I) series to be structurally characterized, 4 and 6 contain room-temperature stable U(VI)-I bonds with 4 being the first structurally characterized room temperature stable U(VI)-I compound which can be conveniently prepared on a gram scale in quantitative yield. The synthesis and characterization of 5 using an analogous halogen exchange reaction to that used for the preparation of 4 is also reported.

Synthesis and structure of UO2I2(OH2)2 x 4Et2O: first structurally characterized U(VI)-I bond and lightest missing member of the UO2X2 (X = halide) series.

UO2I2(OH2)2.4Et2O has been synthesized and structurally characterized using X-ray diffraction. This thermally unstable species is the lightest missing member of the dioxouranium dihalide (UO2X2, X = F, Cl, Br, I)-containing series to be structurally characterized and is, to our knowledge, the first structurally characterized compound containing a U(VI)-I bond.

Experimental and theoretical characterization of cationic, neutral, and anionic binary arsenic and antimony azide species.

Cationic, neutral, and anionic arsenic and antimony halides formed binary arsenic and antimony azide species M(N(3))(4)(+), M(N(3))(4)(-), and M(N(3))(6)(-) (M = As, Sb) upon reaction with trimethylsilyl azide or sodium azide. The compounds were obtained as pure substances or salts, and their identity was established by vibrational spectroscopy and multinuclear NMR spectroscopy and partially by elemental analysis. Attempts to synthesize pentaazides, M(N(3))(5) (M = As, Sb), failed due to spontaneous decomposition of the compounds. Density functional theory (B3LYP) was applied to calculate structural and vibrational data. Vibrational assignments of the normal modes for the isolated azide compounds were made on the basis of their vibrational spectra in comparison with computational results. The molecular structures and vibrational spectra of the arsenic and antimony pentaazides have been investigated theoretically. These calculations (B3LYP) show minima structures (NIMAG = 0) for all reported compounds. It is shown that the M(N(3))(4)(+) (M = As, Sb) cations exhibit ideal S(4) symmetry and the M(N(3))(6)(-) anions (M = As, Sb) ideal S(6) symmetry. The structure of the hexaazidoarsenate(V) has been determined by X-ray diffraction as its pyridinium salt. [py-H][As(N(3))(6)] crystallizes in the triclinic space group P with a = 6.8484(7), b = 7.3957(8), and c = 8.0903(8) A, alpha = 91.017(2), beta = 113.235(2), and gamma = 91.732(2) degrees, V = 376.29(7) A(3), and Z = 1. The structure of the As(N(3))(6)(-) anion exhibits only S(2) symmetry but shows approximately S(6) symmetry. The calculated and experimentally observed structure as well as the calculated and observed IR and Raman frequencies for all azide species (except M(N(3))(5)) are in reasonable agreement.

S2 N3+ : An Aromatic SN Cation with an N3 Unit.

Surprisingly stable is the first example of a binary six π electron aromatic SN cation with an N3 unit, S2 N3+ . It can be isolated on a macroscopic scale when a large counter anion is present. The structure determined by X-ray investigations is in good agreement with theoretical data. The unequivocal identification was supported by Raman and infrared studies. The structure and bonding are discussed on the basis of MO (molecular orbital) and AIM (atoms-in-molecules) analysis.