Characterization of yeast mutant strains for starter culture in Arabica coffee fermentation.

Arabica coffee is the most popular and best-selling type of coffee. During coffee fermentation, microorganisms are essential for the production of metabolites and volatile compounds that affect coffee flavor quality. This work aimed to study the mutation, selection, and characterization of the Wickerhamomyces anomalus strain YWP1-3 as a starter culture to enhance the flavor quality of Arabica coffee. The results revealed that six mutants could produce relatively high levels of the pectinase enzyme on pectin agar media and exhibited high activity levels, ranging from 332.35 to 415.88 U/ml in mucilage broth. Strains UV22-2, UV22-3, UV41-1 and UV32-1 displayed higher levels of amylase activity than did the wild type. The UV22-2 and UV22-3 mutants exhibited the highest pectin degradation indices of 49.22% and 45.97%, respectively, and displayed significantly enhanced growth rates in nitrogen yeast base media supplemented with various sugars; thus, these mutants were evaluated for their ability to serve as a starter for fermentation of Arabica coffee. The cupping scores of coffees derived from UV22-2 and UV22-3 were 83.5 ± 1.5 and 82.0 ± 2.14, respectively. The volatile compounds in the roasted coffee fermented by UV22-2 were analyzed by GC‒MS, which revealed higher levels of furfuryl alcohol and furfuryl acetate than did the other samples. These findings suggested that UV22-2 could be an influential starter culture for Arabica coffee fermentation.

Fungal strain improvement for efficient cellulase production and lignocellulosic biorefinery: Current status and future prospects.

Lignocellulosic biomass (LCB) has been recognized as a valuable carbon source for the sustainable production of biofuels and value-added biochemicals. Crude enzymes produced by fungal cell factories benefit economic LCB degradation. However, high enzyme production cost remains a great challenge. Filamentous fungi have been widely used to produce cellulolytic enzymes. Metabolic engineering of fungi contributes to efficient cellulase production for LCB biorefinery. Here the latest progress in utilizing fungal cell factories for cellulase production was summarized, including developing genome engineering tools to improve the efficiency of fungal cell factories, manipulating promoters, and modulating transcription factors. Multi-omics analysis of fungi contributes to identifying novel genetic elements for enhancing cellulase production. Furthermore, the importance of translation regulation of cellulase production are emphasized. Efficient development of fungal cell factories based on integrative strain engineering would benefit the overall bioconversion efficacy of LCB for sustainable bioproduction.

Towards a Miniaturized Culture Screening for Cellulolytic Fungi and Their Agricultural Lignocellulosic Degradation.

The substantial use of fungal enzymes to degrade lignocellulosic plant biomass has widely been attributed to the extensive requirement of powerful enzyme-producing fungal strains. In this study, a two-step screening procedure for finding cellulolytic fungi, involving a miniaturized culture method with shake-flask fermentation, was proposed and demonstrated. We isolated 297 fungal strains from several cellulose-containing samples found in two different locations in Thailand. By using this screening strategy, we then selected 9 fungal strains based on their potential for cellulase production. Through sequence-based identification of these fungal isolates, 4 species in 4 genera were identified: Aspergillus terreus (3 strains: AG466, AG438 and AG499), Penicillium oxalicum (4 strains: AG452, AG496, AG498 and AG559), Talaromyces siamensis (1 strain: AG548) and Trichoderma afroharzianum (1 strain: AG500). After examining their lignocellulose degradation capacity, our data showed that P. oxalicum AG452 exhibited the highest glucose yield after saccharification of pretreated sugarcane trash, cassava pulp and coffee silverskin. In addition, Ta. siamensis AG548 produced the highest glucose yield after hydrolysis of pretreated sugarcane bagasse. Our study demonstrated that the proposed two-step screening strategy can be further applied for discovering potential cellulolytic fungi isolated from various environmental samples. Meanwhile, the fungal strains isolated in this study will prove useful in the bioconversion of agricultural lignocellulosic residues into valuable biotechnological products.

Identification and evaluation of novel anchoring proteins for cell surface display on Saccharomyces cerevisiae.

The development of arming yeast strains as whole-cell biocatalysts involves a selection of effective anchoring proteins to display enzymes and proteins on yeast cell surface. To screen for novel anchoring proteins with improved efficiency, a bioinformatics pipeline for the identification of glycosylphosphatidylinositol-anchored cell wall proteins (GPI-CWPs) suitable for attaching passenger proteins to the cell surface of Saccharomyces cerevisiae has been developed. Here, the C-terminal sequences (CTSs) of putative GPI-CWPs were selected based on the criteria that the sequence must contain a serine/threonine-rich (S/T) region of at least 30% S/T content, a total threonine content of at least 10%, a continuous S/T stretch of at least 130 amino acids in length, and a continuous T-rich region of at least 10 amino acids in length. Of the predicted 790 proteins, 37 putative GPI-CWPs were selected from different yeast and fungal species to be evaluated for their performance in displaying yeast-enhanced green fluorescent protein and ß-glucosidase enzyme. This led to the identification of five novel anchoring proteins with higher performance compared to α-agglutinin used as benchmark. In particular, the CTS of uncharacterized protein in Kluyveromyces lactis, namely 6_Kl, is the most efficient anchoring protein of the group. The CTS of 6_Kl protein provided a ß-glucosidase activity of up to 23.5 U/g cell dry weight, which is 2.8 times higher than that of the CTS of α-agglutinin. These identified CTSs could be potential novel anchoring protein candidates for construction of efficient arming yeasts for biotechnology applications in the future.

Biochemical characterization and synergism of cellulolytic enzyme system from Chaetomium globosum on rice straw saccharification.

BACKGROUND: Efficient hydrolysis of lignocellulosic materials to sugars for conversion to biofuels and chemicals is a key step in biorefinery. Designing an active saccharifying enzyme system with synergy among their components is considered a promising approach. RESULTS: In this study, a lignocellulose-degrading enzyme system of Chaetomium globosum BCC5776 (CG-Cel) was characterized for its activity and proteomic profiles, and synergism with accessory enzymes. The highest cellulase productivity of 0.40 FPU/mL was found for CG-Cel under the optimized submerged fermentation conditions on 1% (w/v) EPFB (empty palm fruit bunch), 2% microcrystalline cellulose (Avicel®) and 1% soybean meal (SBM) at 30 °C, pH 5.8 for 6 d. CG-Cel worked optimally at 50-60 °C in an acidic pH range. Proteomics analysis by LC/MS/MS revealed a complex enzyme system composed of core cellulases and accessory hydrolytic/non-hydrolytic enzymes attacking plant biopolymers. A synergistic enzyme system comprising the CG-Cel, a ß-glucosidase (Novozyme® 188) and a hemicellulase Accellerase® XY was optimized on saccharification of alkaline-pretreated rice straw by a mixture design approach. Applying a full cubic model, the optimal ratio of ternary enzyme mixture containing CG-Cel: Novozyme® 188: Accellerase® XY of 44.4:20.6:35.0 showed synergistic enhancement on reducing sugar yield with a glucose releasing efficiency of 256.4 mg/FPU, equivalent to a 2.9 times compared with that from CG-Cel alone. CONCLUSIONS: The work showed an approach for developing an active synergistic enzyme system based on the newly characterized C. globosum for lignocellulose saccharification and modification in bio-industries.

Synergistic action of recombinant accessory hemicellulolytic and pectinolytic enzymes to Trichoderma reesei cellulase on rice straw degradation.

Synergism between core cellulases and accessory hydrolytic/non-hydrolytic enzymes is the basis of efficient hydrolysis of lignocelluloses. In this study, the synergistic action of three recombinant accessory enzymes, namely GH62 α-l-arabinofuranosidase (ARA), CE8 pectin esterase (PET), and GH10 endo-1,4-beta-xylanase (XYL) from Aspergillus aculeatus expressed in Pichia pastoris to a commercial Trichoderma reesei cellulase (Accellerase® 1500; ACR) on hydrolysis of alkaline pretreated rice straw was studied using a mixture design approach. Applying the full cubic model, the optimal ratio of quaternary enzyme mixture was predicted to be ACR:ARA:PET:XYL of 0.171:0.079:0.100:0.150, which showed a glucose releasing efficiency of 0.173 gglc/FPU, higher than the binary ACR:XYL mixture (0.122 gglc/FPU) and ACR alone (0.081 gglc/FPU) leading to a 47.3% increase in glucose yield compared with that from ACR at the same cellulase dosage. The result demonstrates the varying degree of synergism of accessory enzymes to cellulases useful for developing tailor-made enzyme systems for bio-industry.

Production and characterization of multi-polysaccharide degrading enzymes from Aspergillus aculeatus BCC199 for saccharification of agricultural residues.

Enzymatic hydrolysis of lignocellulosic biomass into fermentable sugars is a key step in the conversion of agricultural by-products to biofuels and value-added chemicals. Utilization of a robust microorganism for on-site production of biomass-degrading enzymes has gained increasing interest as an economical approach for supplying enzymes to biorefinery processes. In this study, production of multi-polysaccharide-degrading enzymes from Aspergillus aculeatus BCC199 by solid-state fermentation was improved through the statistical design approach. Among the operational parameters, yeast extract and soybean meal as well as the nonionic surfactant Tween 20 and initial pH were found as key parameters for maximizing production of cellulolytic and hemicellulolytic enzymes. Under the optimized condition, the production of FPase, endoglucanase, ß-glucosidase, xylanase, and ß-xylosidase was achieved at 23, 663, 88, 1,633, and 90 units/g of dry substrate, respectively. The multi-enzyme extract was highly efficient in the saccharification of alkaline-pretreated rice straw, corn cob, and corn stover. In comparison with commercial cellulase preparations, the BCC199 enzyme mixture was able to produce remarkable yields of glucose and xylose, as it contained higher relative activities of ß-glucosidase and core hemicellulases (xylanase and ß-xylosidase). These results suggested that the crude enzyme extract from A. aculeatus BCC199 possesses balanced cellulolytic and xylanolytic activities required for the efficient saccharification of lignocellulosic biomass feedstocks, and supplementation of external ß-glucosidase or xylanase was dispensable. The work thus demonstrates the high potential of A. aculeatus BCC199 as a promising producer of lignocellulose-degrading enzymes for the biomass conversion industry.

Transcriptome analysis of xylose metabolism in the thermotolerant methylotrophic yeast Hansenula polymorpha.

The thermotolerant methylotrophic yeast Hansenula polymorpha is able to grow at elevated temperature up to 48 °C as one of a few yeast strains which are naturally capable of alcoholic fermentation of xylose, a pentose sugar abundant in lignocellulosic biomass. However, the current level of ethanol production from xylose by H. polymorpha is still very low compared to those of other xylose-fermenting strains. Therefore, it is necessary to analyze and remodel the xylose metabolism in H. polymorpha at the whole genome level to identify and overcome these limits. In the present study, the transcriptomes of H. polymorpha grown on xylose were compared with those of glucose-grown cells under both aerobic and microaerobic conditions. Approximately, two percent of H. polymorpha genes were either up- or down-regulated by more than two-fold during the growth on xylose. The majority of the up-regulated genes were involved in metabolism. Some genes involved in xylose metabolism, such as XYL1, XYL2, and TAL1 were also up-regulated, despite the fact that the differences in their induction level were only about three-fold. On the other hand, the majority of the down-regulated genes were involved in metabolism and cellular transport. Interestingly, some genes involved in glycolysis and ethanol fermentation were also repressed during growth on xylose, suggesting that these genes are good targets for engineering H. polymorpha to improve xylose fermentation.

Optimisation of synergistic biomass-degrading enzyme systems for efficient rice straw hydrolysis using an experimental mixture design.

Synergistic enzyme system for the hydrolysis of alkali-pretreated rice straw was optimised based on the synergy of crude fungal enzyme extracts with a commercial cellulase (Celluclast™). Among 13 enzyme extracts, the enzyme preparation from Aspergillus aculeatus BCC 199 exhibited the highest level of synergy with Celluclast™. This synergy was based on the complementary cellulolytic and hemicellulolytic activities of the BCC 199 enzyme extract. A mixture design was used to optimise the ternary enzyme complex based on the synergistic enzyme mixture with Bacillus subtilis expansin. Using the full cubic model, the optimal formulation of the enzyme mixture was predicted to the percentage of Celluclast™: BCC 199: expansin=41.4:37.0:21.6, which produced 769 mg reducing sugar/g biomass using 2.82 FPU/g enzymes. This work demonstrated the use of a systematic approach for the design and optimisation of a synergistic enzyme mixture of fungal enzymes and expansin for lignocellulosic degradation.

Characterization of alcohol dehydrogenase 3 of the thermotolerant methylotrophic yeast Hansenula polymorpha.

In this study, we identified and characterized mitochondrial alcohol dehydrogenase 3 from the thermotolerant methylotrophic yeast Hansenula polymorpha (HpADH3). The amino acid sequence of HpADH3 shares over 70% of its identity with the alcohol dehydrogenases of other yeasts and exhibits the highest similarity of 91% with the alcohol dehydrogenase 1 of H. polymorpha. However, unlike the cytosolic HpADH1, HpADH3 appears to be a mitochondrial enzyme, as a mitochondrial targeting extension exists at its N terminus. The recombinant HpADH3 overexpressed in Escherichia coli showed similar catalytic efficiencies for ethanol oxidation and acetaldehyde reduction. The HpADH3 displayed substrate specificities with clear preferences for medium chain length primary alcohols and acetaldehyde for an oxidation reaction and a reduction reaction, respectively. Although the H. polymorpha ADH3 gene was induced by ethanol in the culture medium, both an ADH isozyme pattern analysis and an ADH activity assay indicated that HpADH3 is not the major ADH in H. polymorpha DL-1. Moreover, HpADH3 deletion did not affect the cell growth on different carbon sources. However, when the HpADH3 mutant was complemented by an HpADH3 expression cassette fused to a strong constitutive promoter, the resulting strain produced a significantly increased amount of ethanol compared to the wild-type strain in a glucose medium. In contrast, in a xylose medium, the ethanol production was dramatically reduced in an HpADH3 overproduction strain compared to that in the wild-type strain. Taken together, our results suggest that the expression of HpADH3 would be an ideal engineering target to develop H. polymorpha as a substrate specific bioethanol production strain.

Characterization of alcohol dehydrogenase 1 of the thermotolerant methylotrophic yeast Hansenula polymorpha.

The thermotolerant methylotrophic yeast Hansenula polymorpha has recently been gaining interest as a promising host for bioethanol production due to its ability to ferment xylose, glucose, and cellobiose at elevated temperatures up to 48 degrees C. In this study, we identified and characterized alcohol dehydrogenase 1 of H. polymorpha (HpADH1). HpADH1 seems to be a cytoplasmic protein since no N-terminal mitochondrial targeting extension was detected. Compared to the ADHs of other yeasts, recombinant HpADH1 overexpressed in Escherichia coli exhibited much higher catalytic efficiency for ethanol oxidation along with similar levels of acetaldehyde reduction. HpADH1 showed broad substrate specificity for alcohol oxidation but had an apparent preference for medium chain length alcohols. Both ADH isozyme pattern analysis and ADH activity assay indicated that ADH1 is the major ADH in H. polymorpha DL-1. Moreover, an HpADH1-deleted mutant strain produced less ethanol in glucose or glycerol media compared to wild-type. Interestingly, when the ADH1 mutant was complemented with an HpADH1 expression cassette, the resulting strain produced significantly increased amounts of ethanol compared to wild-type, up to 36.7 g l(-1). Taken together, our results suggest that optimization of ADH1 expression would be an ideal method for developing H. polymorpha into an efficient bioethanol production strain.

Search for a dextransucrase minimal motif involved in dextran binding.

Fourteen truncated forms of Leuconostoc mesenteroides NRRL B512-F dextransucrase, involving N-, C- or N- plus C-terminal domain truncations were tested for their ability to bind dextrans. The shortest fragment (14kDa molecular weight) that still exhibited a strong interaction with dextran was localized between amino acids N1397 and A1527 of the C-terminal domain (GBD-7) and consists of six YG repeats. With a dissociation constant K(d) of 2.8x10(-9)M, this motif shows a very high affinity for isomaltohexaose and longer dextrans, supporting the proposed role of GBD in polymer formation. The potential application of GBD-7 as an affinity tag onto cheap resins like Sephacryl S300HR for rapid purification was evaluated and is discussed.