Sulfide in engineered methanogenic systems - Friend or foe?

Sulfide ions are regarded to be toxic to microorganisms in engineered methanogenic systems (EMS), where organic substances are anaerobically converted to products such as methane, hydrogen, alcohols, and carboxylic acids. A vast body of research has addressed solutions to mitigate process disturbances associated with high sulfide levels, yet the established paradigm has drawn the attention away from the multifaceted sulfide interactions with minerals, organics, microbial interfaces and their implications for performance of EMS. This brief review brings forward sulfide-derived pathways other than toxicity and with potential significance for anaerobic organic matter degradation. Available evidence on sulfide reactions with organic matter, interventions with key microbial metabolisms, and interspecies electron transfer are critically synthesized as a guidance for comprehending the sulfide effects on EMS apart from the microbial toxicity. The outcomes identify existing knowledge gaps and specify future research needs as a step forward towards realizing the potential of sulfide-derived mechanisms in diversifying and optimizing EMS applications.

Effect of Cobalt, Nickel, and Selenium/Tungsten Deficiency on Mesophilic Anaerobic Digestion of Chemically Defined Soluble Organic Compounds.

Trace elements (TEs) are vital for anaerobic digestion (AD), due to their role as cofactors in many key enzymes. The aim of this study was to evaluate the effects of specific TE deficiencies on mixed microbial communities during AD of soluble polymer-free substrates, thus focusing on AD after hydrolysis. Three mesophilic (37 °C) continuous stirred-tank biogas reactors were depleted either of Co, Ni, or a combination of Se and W, respectively, by discontinuing their supplementation. Ni and Se/W depletion led to changes in methane kinetics, linked to progressive volatile fatty acid (VFA) accumulation, eventually resulting in process failure. No significant changes occurred in the Co-depleted reactor, indicating that the amount of Co present in the substrate in absence of supplementation was sufficient to maintain process stability. Archaeal communities remained fairly stable independent of TE concentrations, while bacterial communities gradually changed with VFA accumulation in Ni- and Se-/W-depleted reactors. Despite this, the communities remained relatively similar between these two reactors, suggesting that the major shifts in composition likely occurred due to the accumulating VFAs. Overall, the results indicate that Ni and Se/W depletion primarily lead to slower metabolic activities of methanogenic archaea and their syntrophic partners, which then has a ripple effect throughout the microbial community due to a gradual accumulation of intermediate fermentation products.

Viscosity dynamics and the production of extracellular polymeric substances and soluble microbial products during anaerobic digestion of pulp and paper mill wastewater sludges.

The production processes of the pulp and paper industry often run in campaigns, leading to large variations in the composition of wastewaters and waste sludges. During anaerobic digestion (AD) of these wastes, the viscosity or the production of extracellular polymeric substances (EPS) and soluble microbial products (SMP) may be affected, with the risk of foam formation, inefficient digester mixing or poor sludge dewaterability. The aim of this study was to investigate how viscosity and production of EPS and SMP during long-term AD of pulp and paper mill sludge is affected by changes in organic loading rate (OLR) and hydraulic retention time (HRT). Two mesophilic lab-scale continuous stirred tank reactors (CSTRs) were operated for 800 days (R1 and R2), initially digesting only fibre sludge, then co-digesting fibre sludge and activated sludge. The HRT was lowered, followed by an increase in the OLR. Reactor fluids were sampled once a month for rheological characterization and analysis of EPS and SMP. The production of the protein fraction of SMP was positively correlated to the OLR, implicating reduced effluent qualities at high OLR. EPS formation correlated with the magnesium content, and during sulphate deficiency, the production of EPS and SMP increased. At high levels of EPS and SMP, there was an increase in viscosity of the anaerobic sludges, and dewatering efficiency was reduced. In addition, increased viscosity and/or the production of EPS and SMP were important factors in sludge bulking and foam formation in the CSTRs. Sludge bulking was avoided by more frequent stirring.

Molecular characterization of particulate organic matter in full scale anaerobic digesters: An NMR spectroscopy study.

This study assesses the molecular characteristics of particulate organic matter (POM) in agricultural and food waste digesters and elucidates the molecular properties of the recalcitrant POM fraction, which remains in the digestate after AD process. Molecular properties of POM in influent (substrate) and effluent (digestate) of seven full-scale AD plants (three agricultural waste and four food waste digesters) were characterized and compared using solid-state 13C cross-polarization magic angle spinning (CP-MAS) and solution-state 1H,13C heteronuclear single-quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectroscopy. Comparison of the POM structural compositions of substrate and digestate from each AD plant revealed an enrichment of protein structures relative to the carbohydrates in most cases, implying a preferential degradation of the carbohydrates over proteins and/or increase of microbial biomass upon AD of agricultural and food wastes. Distinctive molecular structures of labile and recalcitrant fractions of POM, subjected to AD, were identified by comparing the NMR spectra of all substrate and digestate POM. Accordingly, the labile POM fraction in food and agricultural solid wastes is characterized by structural entities of lipids and starch-like carbohydrates, whereas recalcitrant POM structures resemble alkyl and aromatic subunits of amino acids, lignin, and polysaccharides with ß-glycosidic linkages. This information serves as a basis to further explore optimization approaches for improving AD of the underutilized POM and the fate of organic matter in digestate-amended arable lands.

Dynamics of a Perturbed Microbial Community during Thermophilic Anaerobic Digestion of Chemically Defined Soluble Organic Compounds.

Knowledge of microbial community dynamics in relation to process perturbations is fundamental to understand and deal with the instability of anaerobic digestion (AD) processes. This study aims to investigate the microbial community structure and function of a thermophilic AD process, fed with a chemically defined substrate, and its association with process performance stability. Next generation amplicon sequencing of 16S ribosomal RNA (rRNA) genes revealed that variations in relative abundances of the predominant bacterial species, Defluviitoga tunisiensis and Anaerobaculum hydrogeniformans, were not linked to the process performance stability, while dynamics of bacterial genera of low abundance, Coprothermobacter and Defluviitoga (other than D. tunisiensis), were associated with microbial community function and process stability. A decrease in the diversity of the archaeal community was observed in conjunction with process recovery and stable performance, implying that the high abundance of specific archaeal group(s) contributed to the stable AD. Dominance of hydrogenotrophic Methanoculleus particularly corresponded to an enhanced microbial acetate and propionate turnover capacity, whereas the prevalence of hydrogenotrophic Methanothermobacter and acetoclastic Methanosaeta was associated with instable AD. Acetate oxidation via syntrophic interactions between Coprothermobacter and Methanoculleus was potentially the main methane-formation pathway during the stable process. We observed that supplementation of Se and W to the medium improved the propionate turnover by the thermophilic consortium. The outcomes of our study provided insights into the community dynamics and trace element requirements in relation to the process performance stability of thermophilic AD.

Substrate and operational conditions as regulators of fluid properties in full-scale continuous stirred-tank biogas reactors - implications for rheology-driven power requirements.

Understanding fluid rheology is important for optimal design and operation of continuous stirred-tank biogas reactors (CSTBRs) and is the basis for power requirement estimates. Conflicting results have been reported regarding the applicability of total solid (TS) and/or total volatile solid (TVS) contents of CSTBR fluids as proxies for rheological properties. Thus, the present study investigates relationships between rheological properties of 12 full-scale CSTBR fluids, their substrate profiles, and major operational conditions, including pH, TS and TVS contents, organic loading rate, hydraulic retention time, and temperature. Rheology-driven power requirements based on various fluid characteristics were evaluated for a general biogas reactor setup. The results revealed a significant correlation only between the rheological fluid properties and TS or TVS contents for sewage sludge digesters and thermophilic co-digesters (CD), but not for mesophilic CD. Furthermore, the calculated power requirements for pumping and mixing, based on the various fluid characteristics of the studied CSTBRs, varied broadly irrespective of TS and TVS contents. Thus, this study shows that the TS and/or TVS contents of digester fluid are not reliable estimators of the rheological properties in CSTBRs digesting substrates other than sewage sludge.

Microbial rRNA gene expression and co-occurrence profiles associate with biokinetics and elemental composition in full-scale anaerobic digesters.

This study examined whether the abundance and expression of microbial 16S rRNA genes were associated with elemental concentrations and substrate conversion biokinetics in 20 full-scale anaerobic digesters, including seven municipal sewage sludge (SS) digesters and 13 industrial codigesters. SS digester contents had higher methane production rates from acetate, propionate and phenyl acetate compared to industrial codigesters. SS digesters and industrial codigesters were distinctly clustered based on their elemental concentrations, with higher concentrations of NH3 -N, Cl, K and Na observed in codigesters. Amplicon sequencing of 16S rRNA genes and reverse-transcribed 16S rRNA revealed divergent grouping of microbial communities between mesophilic SS digesters, mesophilic codigesters and thermophilic digesters. Higher intradigester distances between Archaea 16S rRNA and rRNA gene profiles were observed in mesophilic codigesters, which also had the lowest acetate utilization biokinetics. Constrained ordination showed that microbial rRNA and rRNA gene profiles were significantly associated with maximum methane production rates from acetate, propionate, oleate and phenyl acetate, as well as concentrations of NH3 -N, Fe, S, Mo and Ni. A co-occurrence network of rRNA gene expression confirmed the three main clusters of anaerobic digester communities based on active populations. Syntrophic and methanogenic taxa were highly represented within the subnetworks, indicating that obligate energy-sharing partnerships play critical roles in stabilizing the digester microbiome. Overall, these results provide new evidence showing that different feed substrates associate with different micronutrient compositions in anaerobic digesters, which in turn may influence microbial abundance, activity and function.

Taxonomic and functional turnover are decoupled in European peat bogs.

In peatland ecosystems, plant communities mediate a globally significant carbon store. The effects of global environmental change on plant assemblages are expected to be a factor in determining how ecosystem functions such as carbon uptake will respond. Using vegetation data from 56 Sphagnum-dominated peat bogs across Europe, we show that in these ecosystems plant species aggregate into two major clusters that are each defined by shared response to environmental conditions. Across environmental gradients, we find significant taxonomic turnover in both clusters. However, functional identity and functional redundancy of the community as a whole remain unchanged. This strongly suggests that in peat bogs, species turnover across environmental gradients is restricted to functionally similar species. Our results demonstrate that plant taxonomic and functional turnover are decoupled, which may allow these peat bogs to maintain ecosystem functioning when subject to future environmental change.

Importance of sulfide interaction with iron as regulator of the microbial community in biogas reactors and its effect on methanogenesis, volatile fatty acids turnover, and syntrophic long-chain fatty acids degradation.

The inhibitory effects of sulfide on microbial processes during anaerobic digestion have been widely addressed. However, other effects of sulfide are less explored, given that sulfide is a potential sulfur source for microorganisms and its high reactivity triggers a suit of abiotic reactions. We demonstrated that sulfide interaction with Fe regulates the dynamics and activities of microbial community during anaerobic digestion. This was manifested by the S:Fe molar ratio, whose increase adversely influenced the acetoclastic methanogens, Methanosaeta, and turnover of acetate. Dynamics of hydrogenotrophic methanogens, Methanoculleus and Methanobrevibacter, were presumably influenced by sulfide-induced changes in the partial pressure of hydrogen. Interestingly, conversion of the long-chain fatty acid (LCFA), oleate, to methane was enhanced together with the abundance of LCFA-degrading, ß-oxidizing Syntrophomonas at an elevated S:Fe molar ratio. The results suggested that sulfur chemical speciation is a controlling factor for microbial community functions in anaerobic digestion processes.

Chemical speciation of sulfur and metals in biogas reactors - Implications for cobalt and nickel bio-uptake processes.

This article deals with the interrelationship between overall chemical speciation of S, Fe, Co, and Ni in relation to metals bio-uptake processes in continuous stirred tank biogas reactors (CSTBR). To address this topic, laboratory CSTBRs digesting sulfur(S)-rich stillage, as well as full-scale CSTBRs treating sewage sludge and various combinations of organic wastes, termed co-digestion, were targeted. Sulfur speciation was evaluated using acid volatile sulfide extraction and X-ray absorption spectroscopy. Metal speciation was evaluated by chemical fractionation, kinetic and thermodynamic analyses. Relative Fe to S content is identified as a critical factor for chemical speciation and bio-uptake of metals. In reactors treating sewage sludge, quantity of Fe exceeds that of S, inducing Fe-dominated conditions, while sulfide dominates in laboratory and co-digestion reactors due to an excess of S over Fe. Under sulfide-dominated conditions, metals availability for microorganisms is restricted due to formation of metal-sulfide precipitates. However, aqueous concentrations of different Co and Ni species were shown to be sufficient to support metal acquisition by microorganisms under sulfidic conditions. Concentrations of free metal ions and labile metal complexes in aqueous phase, which directly participate in bio-uptake processes, are higher under Fe-dominated conditions. This in turn enhances metal adsorption on cell surfaces and bio-uptake rates.

Microbial community adaptation influences long-chain fatty acid conversion during anaerobic codigestion of fats, oils, and grease with municipal sludge.

Codigesting fats, oils, and greases with municipal wastewater sludge can greatly improve biomethane recovery at wastewater treatment facilities. Process loading rates of fats, oils, and greases have been previously tested with little knowledge of the digester microbial community structure, and high transient fat loadings have led to long chain fatty acid (LCFA) accumulation and digester upsets. This study utilized recently-developed quantitative PCR assays for syntrophic LCFA-degrading bacteria along with 16S amplicon sequencing to relate changes in microbial community structure to LCFA accumulation during transient loading increases to an anaerobic codigester receiving waste restaurant oil and municipal wastewater sludge. The 16S rRNA gene concentration of the syntrophic ß-oxidizing genus Syntrophomonas increased to ∼15% of the Bacteria community in the codigester, but stayed below 3% in the control digester that was fed only wastewater sludge. Methanosaeta and Methanospirillum were the dominant methanogenic genera enriched in the codigester, and together comprised over 80% of the Archaea community by the end of the experimental period. Constrained ordination showed that changes in the codigester Bacteria and Archaea community structures were related to measures of digester performance. Notably, the effluent LCFA concentration in the codigester was positively correlated to the specific loading rate of waste oil normalized to the Syntrophomonas 16S rRNA concentration. Specific loading rates of 0-1.5 × 10(-12) g VS oil/16S gene copies-day resulted in LCFA concentrations below 30 mg/g TS, whereas LCFA accumulated up to 104 mg/g TS at higher transient loading rates. Based on the community-dependent loading limitations found, enhanced biomethane production from high loadings of fats, oils and greases can be achieved by promoting a higher biomass of slow-growing syntrophic consortia, such as with longer digester solids retention times. This work also demonstrates the potential for controlling the loading rate of fats, oils, and greases based on the analysis of the codigester community structure, such as with quantitative PCR measurements of syntrophic LCFA-degrading bacteria abundance.

High-rate anaerobic co-digestion of kraft mill fibre sludge and activated sludge by CSTRs with sludge recirculation.

Kraft fibre sludge from the pulp and paper industry constitutes a new, widely available substrate for the biogas production industry, with high methane potential. In this study, anaerobic digestion of kraft fibre sludge was examined by applying continuously stirred tank reactors (CSTR) with sludge recirculation. Two lab-scale reactors (4L) were run for 800days, one on fibre sludge (R1), and the other on fibre sludge and activated sludge (R2). Additions of Mg, K and S stabilized reactor performance. Furthermore, the Ca:Mg ratio was important, and a stable process was achieved at a ratio below 16:1. Foaming was abated by short but frequent mixing. Co-digestion of fibre sludge and activated sludge resulted in more robust conditions, and high-rate operation at stable conditions was achieved at an organic loading rate of 4g volatile solids (VS)L(-1)day(-1), a hydraulic retention time of 4days and a methane production of 230±10NmL per g VS.

Geochemical control processes and potential sediment toxicity in a mine-impacted lake.

Geochemical parameters and major ion concentrations from sediments of a freshwater lake in the town of Åtvidaberg, southeastern, Sweden, were used to identify the geochemical processes that control the water chemistry. The lake sediments are anoxic, characterized by reduced sulfur and sulfidic minerals. The hypothesis tested is that in sulfidic-anaerobic contaminated sediments, the presence of redox potential changes creates a favorable condition for sulfide oxidation, resulting in the release of potentially toxic metals. The acid volatile sulfide (AVS) contents ranged from 5.5 µmol/g to 16 µmol/g of dry sediment. Comparison of total mine tailing metals (∑mine tailing metals) with simultaneously extracted metals (SEM) in sediments indicates that up to 20% of the ∑mine tailing metals are bound to the solid phase as AVS. Consequently, the AVS and SEM analysis classified all sediment samples as potentially toxic in terms of heavy metal concentrations (i.e., SEM to AVS ratio distribution > 1). Evaluation of hydrogeochemical data suggests that calcite dissolution, iron (III) oxyhydroxysulfate mineral jarosite (H-jarosite) precipitation, hematite precipitation, and siderite precipitation are the most prevailing geochemical processes that control the geochemical interactions between the water column and sediment in a mine-impacted lake. The geochemical processes were verified and quantified using a chemical equilibrium modeling program, Visual MINTEQ, Ver 3.1, beta. The identified geochemical processes create an environment in which the characteristics of sulfate-rich waters and acidic-iron produce the geochemical conditions for acid mine drainage and mobilization of toxic metals.

Monitoring the dynamics of syntrophic ß-oxidizing bacteria during anaerobic degradation of oleic acid by quantitative PCR.

The ecophysiology of long-chain fatty acid-degrading syntrophic ß-oxidizing bacteria has been poorly understood due to a lack of quantitative abundance data. Here, TaqMan quantitative PCR (qPCR) assays targeting the 16S rRNA gene of the known mesophilic syntrophic ß-oxidizing bacterial genera Syntrophomonas and Syntrophus were developed and validated. Microbial community dynamics were followed using qPCR and Illumina-based high-throughput amplicon sequencing in triplicate methanogenic bioreactors subjected to five consecutive batch feedings of oleic acid. With repeated oleic acid feeding, the initial specific methane production rate significantly increased along with the relative abundances of Syntrophomonas and methanogenic archaea in the bioreactor communities. The novel qPCR assays showed that Syntrophomonas increased from 7 to 31% of the bacterial community 16S rRNA gene concentration, whereas that of Syntrophus decreased from 0.02 to less than 0.005%. High-throughput amplicon sequencing also revealed that Syntrophomonas became the dominant genus within the bioreactor microbiomes. These results suggest that increased specific mineralization rates of oleic acid were attributed to quantitative shifts within the microbial communities toward higher abundances of syntrophic ß-oxidizing bacteria and methanogenic archaea. The novel qPCR assays targeting syntrophic ß-oxidizing bacteria may thus serve as monitoring tools to indicate the fatty acid ß-oxidization potential of anaerobic digester communities.

Anaerobic digestion of alkaline bleaching wastewater from a kraft pulp and paper mill using UASB technique.

Anaerobic digestion of alkaline kraft elemental chlorine-free bleaching wastewater in two mesophilic, lab-scale upflow anaerobic sludge bed reactors resulted in significantly higher biogas production (250±50 vs. 120±30 NmL g [Formula: see text]) and reduction of filtered total organic carbon (fTOC) (60±5 vs. 43±6%) for wastewater from processing of hardwood (HW) compared with softwood (SW). In all cases, the gas production was likely underestimated due to poor gas separation in the reactors. Despite changes in wastewater characteristics, a stable anaerobic process was maintained with hydraulic retention times (HRTs) between 7 and 14 h. Lowering the HRT (from 13.5 to 8.5 h) did not significantly affect the process, and the stable performance at 8.5 h leaves room for further decreases in HRT. The results show that this type of wastewater is suitable for a full-scale implementation, but the difference in methane potential between SW and HW is important to consider both regarding process dimensioning and biogas yield optimization.

Importance of reduced sulfur for the equilibrium chemistry and kinetics of Fe(II), Co(II) and Ni(II) supplemented to semi-continuous stirred tank biogas reactors fed with stillage.

The objective of the present study was to assess major chemical reactions and chemical forms contributing to solubility and speciation of Fe(II), Co(II), and Ni(II) during anaerobic digestion of sulfur (S)-rich stillage in semi-continuous stirred tank biogas reactors (SCSTR). These metals are essential supplements for efficient and stable performance of stillage-fed SCSTR. In particular, the influence of reduced inorganic and organic S species on kinetics and thermodynamics of the metals and their partitioning between aqueous and solid phases were investigated. Solid phase S speciation was determined by use of S K-edge X-ray absorption near-edge spectroscopy. Results demonstrated that the solubility and speciation of supplemented Fe were controlled by precipitation of FeS(s) and formation of the aqueous complexes of Fe-sulfide and Fe-thiol. The relatively high solubility of Co (∼ 20% of total Co content) was attributed to the formation of compounds other than Co-sulfide and Co-thiol, presumably of microbial origin. Nickel had lower solubility than Co and its speciation was regulated by interactions with FeS(s) (e.g. co-precipitation, adsorption, and ion substitution) in addition to precipitation/dissolution of discrete NiS(s) phase and formation of aqueous Ni-sulfide complexes.

454 pyrosequencing analyses of bacterial and archaeal richness in 21 full-scale biogas digesters.

The microbial community of 21 full-scale biogas reactors was examined using 454 pyrosequencing of 16S rRNA gene sequences. These reactors included seven (six mesophilic and one thermophilic) digesting sewage sludge (SS) and 14 (ten mesophilic and four thermophilic) codigesting (CD) various combinations of wastes from slaughterhouses, restaurants, households, etc. The pyrosequencing generated more than 160,000 sequences representing 11 phyla, 23 classes, and 95 genera of Bacteria and Archaea. The bacterial community was always both more abundant and more diverse than the archaeal community. At the phylum level, the foremost populations in the SS reactors included Actinobacteria, Proteobacteria, Chloroflexi, Spirochetes, and Euryarchaeota, while Firmicutes was the most prevalent in the CD reactors. The main bacterial class in all reactors was Clostridia. Acetoclastic methanogens were detected in the SS, but not in the CD reactors. Their absence suggests that methane formation from acetate takes place mainly via syntrophic acetate oxidation in the CD reactors. A principal component analysis of the communities at genus level revealed three clusters: SS reactors, mesophilic CD reactors (including one thermophilic CD and one SS), and thermophilic CD reactors. Thus, the microbial composition was mainly governed by the substrate differences and the process temperature.

Characterization of dissolved organic matter in full scale continuous stirred tank biogas reactors using ultrahigh resolution mass spectrometry: a qualitative overview.

Dissolved organic matter (DOM) was characterized in eight full scale continuous stirred tank biogas reactors (CSTBR) using solid-phase extraction and electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FT-ICR-MS). An overview of the DOM molecular complexity in the samples from biogas reactors with conventional operational conditions and various substrate profiles is provided by assignments of unambiguous exact molecular formulas for each measured mass peak. Analysis of triplicate samples for each reactor demonstrated the reproducibility of the solid-phase extraction procedure and ESI-FT-ICR-MS which allowed precise evaluation of the DOM molecular differences among the different reactors. Cluster analysis on mass spectrometric data set showed that the biogas reactors treating sewage sludge had distinctly different DOM characteristics compared to the codigesters treating a combination of organic wastes. Furthermore, the samples from thermophilic and mesophilic codigesters had different DOM composition in terms of identified masses and corresponding intensities. Despite the differences, the results demonstrated that compositionally linked organic compounds comprising 28-59% of the total number of assigned formulas for the samples were shared in all the reactors. This suggested that the shared assigned formulas in studied CSTBRs might be related to common biochemical transformation in anaerobic digestion process and therefore, performance of the CSTBRs.

Impact of trace element addition on degradation efficiency of volatile fatty acids, oleic acid and phenyl acetate and on microbial populations in a biogas digester.

The effect of trace element addition on anaerobic digestion of food industry- and household waste was studied using two semi-continuous lab-scale reactors, one (R30+) was supplied with Fe, Co and Ni, while the other (R30) acted as a control. Tracer analysis illustrated that methane production from acetate proceeded through syntrophic acetate oxidation (SAO) in both digesters. The effect of the trace elements was also evaluated in batch assays to determine the capacity of the microorganisms of the two digesters to degrade acetate, phenyl acetate, oleic acid or propionate, butyrate and valerate provided as a cocktail. The trace elements addition improved the performance of the process giving higher methane yields during start-up and early operation and lower levels of mainly acetate and propionate in the R30+ reactor. The batch assay showed that material from R30+ gave effects on methane production from all substrates tested. Phenyl acetate was observed to inhibit methane formation in the R30 but not in the R30+ assay. A real-time PCR analysis targeting methanogens on the order level as well as three SAO bacteria showed an increase in Methanosarcinales in the R30+ reactor over time, even though SAO continuously was the dominating pathway for methane production. Possibly, this increase explains the low VFA-levels and higher degradation rates observed in the R30+ batch incubations. These results show that the added trace elements affected the ability of the microflora to degrade VFAs as well as oleic acid and phenyl acetate in a community, where acetate utilization is dominated by SAO.

Sulfur K-edge XANES and acid volatile sulfide analyses of changes in chemical speciation of S and Fe during sequential extraction of trace metals in anoxic sludge from biogas reactors.

The effect of sequential extraction of trace metals on sulfur (S) speciation in anoxic sludge samples from two lab-scale biogas reactors augmented with Fe was investigated. Analyses of sulfur K-edge X-ray absorption near edge structure (S XANES) spectroscopy and acid volatile sulfide (AVS) were conducted on the residues from each step of the sequential extraction. The S speciation in sludge samples after AVS analysis was also determined by S XANES. Sulfur was mainly present as FeS (≈ 60% of total S) and reduced organic S (≈ 30% of total S), such as organic sulfide and thiol groups, in the anoxic solid phase. Sulfur XANES and AVS analyses showed that during first step of the extraction procedure (the removal of exchangeable cations), a part of the FeS fraction corresponding to 20% of total S was transformed to zero-valent S, whereas Fe was not released into the solution during this transformation. After the last extraction step (organic/sulfide fraction) a secondary Fe phase was formed. The change in chemical speciation of S and Fe occurring during sequential extraction procedure suggests indirect effects on trace metals associated to the FeS fraction that may lead to incorrect results. Furthermore, by S XANES it was verified that the AVS analysis effectively removed the FeS fraction. The present results identified critical limitations for the application of sequential extraction for trace metal speciation analysis outside the framework for which the methods were developed.