Fifteen years of Servitude et Grandeur to the application of a biophysical technique in medicine: The tale of AFMBioMed.

AFMBioMed is the founding name under which international conferences and summer schools are organized around the application of atomic force microscopy in life sciences and nanomedicine. From its inception at the Atomic Energy Commission in Marcoule near 2004 to its creation in 2007 and to its 10th anniversary conference in Krakow, a brief narrative history of its birth and rise will demonstrate how and what such an organization brings to laboratories and the AFM community. With the current planning of the next AFMBioMed conference in Münster in 2019, it will be 15 years of commitment to these events.

Characterization of silver particles in the stratum corneum of healthy subjects and atopic dermatitis patients dermally exposed to a silver-containing garment.

Silver is increasingly being used in garments to exploit its antibacterial properties. Information on the presence of silver nanoparticles (AgNPs) in garments and their in vivo penetration across healthy and impaired skin from use is limited. We investigated the presence of AgNPs in a silver containing garment and in the stratum corneum (SC) of healthy subjects (CTRLs) and individuals with atopic dermatitis (AD). Seven CTRLs and seven AD patients wore a silver sleeve (13% Ag w/w) 8 h/day for five days on a forearm and a placebo sleeve on the other forearm. After five days, the layers of the SC were collected by adhesive tapes. The silver particles in the garment and SC were characterized by scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX) and atomic force microscopy (AFM). AFM and SEM revealed the presence of sub-micrometre particles having a broad range of sizes (30-500 nm) on the surface of the garment that were identified as silver. On the SC tapes collected from different depths, aggregates with a wide range of sizes (150 nm-2 µm) and morphologies were found. Most aggregates contained primarily silver, although some also contained chlorine and sulfur. There was no clear difference in the number or size of the aggregates observed in SC between healthy and AD subjects. After use, AgNPs and their aggregates were present in the SC at different depths of both healthy subjects and AD patients. Their micrometre size suggests that aggregation likely occurred in the SC.

In vitro percutaneous penetration and characterization of silver from silver-containing textiles.

The objective of this study was to determine the in vitro percutaneous penetration of silver and characterize the silver species released from textiles in different layers of full thickness human skin. For this purpose, two different wound dressings and a garment soaked in artificial sweat were placed in the donor compartments of Franz cells for 24 hours. The concentration of silver in the donor phase and in the skin was determined by an electrothermal atomic absorption spectrometer (ET-AAS) and by inductively coupled plasma mass spectrometer (ICP-MS). The characterization of silver species in the textiles and in the skin layers was made by scanning electron microscopy with integrated energy dispersive X-ray spectroscopy (SEM-EDX). Additionally, the size distribution of silver nanoparticles in the textiles was performed by atomic force microscopy (AFM). On the surface of all investigated materials, silver nanoparticles of different size and morphology were found. Released silver concentrations in the soaking solutions (ie, exposure concentration) ranged from 0.7 to 4.7 µg/mL (0.6-4.0 µg/cm(2)), fitting the bactericidal range. Silver and silver chloride aggregates at sizes of up to 1 µm were identified both in the epidermis and dermis. The large size of these particles suggests that the aggregation occurred in the skin. The formation of these aggregates likely slowed down the systemic absorption of silver. Conversely, these aggregates may form a reservoir enabling prolonged release of silver ions, which might lead to local effects.

Role of subcolloidal (nanosized) precursor species in the early stage of the crystallization of zeolites in heterogeneous systems.

A critical analysis was carried out for the purpose of understanding the role of subcolloidal (nanosized) (alumino)silicate precursor species in the early stage of crystallization of zeolites in heterogeneous systems (hydrogels). The formation and evolution of these subcolloidal species in both the solid and the liquid phases were investigated by various experimental methods such a scanning electron microscopy (SEM, FE-SEM), transmission electron microscopy, atomic force microscopy, particle size analysis, pH measurement, atomic absorption spectroscopy, and dynamic light scattering, after careful separation of intermediates from reaction mixture by two-step centrifugation treatment. The results revealed that a chain of processes (i) the formation of low-molecular-weight (LMW) silicate species, by dissolution of Al-enriched amorphous silica, and their aggregation into about 3 nm sized primary precursor species (PPSs), (ii) the formation of larger (∼3 to ∼15 nm sized) silicate precursor species (LSPSs) by a rapid aggregation/coalescence of PPSs, (iii) the formation of "gel" (primary amorphous precursor) by a random aggregation of LSPSs at room temperature, and (iv) the formation of the worm-like particles (secondary amorphous precursor) occurred in the solid phase during heating of the reaction mixture (hydrogel) from room temperature to 170 °C. It is interesting that almost the same processes occur in the liquid phase but with decreased rate according to the relative low concentration of LMW silicate species. With the above described findings, it is highly expected that the manipulation of crystallization pathway through controlling the formation/evolution of precursor species in the initial stage of the process can be achieved.

Marine polysaccharide networks and diatoms at the nanometric scale.

Despite many advances in research on photosynthetic carbon fixation in marine diatoms, the biophysical and biochemical mechanisms of extracellular polysaccharide production remain significant challenges to be resolved at the molecular scale in order to proceed toward an understanding of their functions at the cellular level, as well as their interactions and fate in the ocean. This review covers studies of diatom extracellular polysaccharides using atomic force microscopy (AFM) imaging and the quantification of physical forces. Following a brief summary of the basic principle of the AFM experiment and the first AFM studies of diatom extracellular polymeric substance (EPS), we focus on the detection of supramolecular structures in polysaccharide systems produced by marine diatoms. Extracellular polysaccharide fibrils, attached to the diatom cell wall or released into the surrounding seawater, form distinct supramolecular assemblies best described as gel networks. AFM makes characterization of the diatom polysaccharide networks at the micro and nanometric scales and a clear distinction between the self-assembly and self-organization of these complex systems in marine environments possible.

A novel type of colony formation in marine planktonic diatoms revealed by atomic force microscopy.

Diatoms have evolved a variety of colonial life forms in which cells are connected by organic threads, mucilage pads or silicate structures. In this study, we provide the first description of a novel strategy of colony formation among marine planktonic diatoms. Bacteriastrum jadranum forms loose but regular chains with distinct heterovalvate terminal cells. The colonial cells and their siliceous projections, the setae, are not in direct contact; instead, they are enclosed within the optically transparent organic matrix. This cell jacket structure was detected by staining procedure with Alcian Blue, which showed that the polysaccharides are predominant matrix constituents and revealed that the jacket reaches the span of the setae. The scanning electron microscopy (SEM) observations showed distinguishable fibrillar network firmly associated with cells. Using atomic force microscopy (AFM), we were able to visualise and characterise the cell jacket structure at molecular resolution. At nanoscale resolution, the cell jacket appears as a cross-linked fibrillar network organised into a recognisable structure. The circular patches of self-repeating pattern (hexagonal pores with openings of 8-100 nm) are connected through thicker surrounding fibrils and reinforced by branching fibrils. The pore-forming fibrils within the patches are only 0.6-1.6 nm high, the surrounding fibrils connecting patches are 2.0-2.8 nm high, and the branching fibrils are considerably wider but not higher than 4.0 nm. The discovered polysaccharide fibrillar network is highly organised and delicately structured with a monomolecular fibril height of 0.6 nm. We conclude that the Bacteriastrum polysaccharide jacket represents an essential part of the cell, as the conjunction of the polymer network with the frustule appears to be extremely tight and such specific and unique patterns have never been found in self-assembled polysaccharide gel networks, which are usually encountered in the marine environment.

Adhesion signals of phospholipid vesicles at an electrified interface.

General adhesion behavior of phospholipid vesicles was examined in a wide range of potentials at the mercury electrode by recording time-resolved adhesion signals. It was demonstrated that adhesion-based detection is sensitive to polar headgroups in phospholipid vesicles. We identified a narrow potential window around the point of zero charge of the electrode where the interaction of polar headgroups of phosphatidylcholine vesicles with the substrate is manifested in the form of bidirectional signals. The bidirectional signal is composed of the charge flow due to the nonspecific interaction of vesicle adhesion and spreading and of the charge flow due to a specific interaction of the negatively charged electrode and the most exposed positively charged choline headgroups. These signals are expected to appear only when the electrode surface charge density is less than the surface charge density of the choline groups at the contact interface. In comparison, for the negatively charged phosphatidylserine vesicles, we identified the potential window at the mercury electrode where charge compensation takes place, and bidirectional signals were not detected.

Atomic force microscopy characterization of silver nanoparticles interactions with marine diatom cells and extracellular polymeric substance.

This study highlights the capacity of atomic force microscopy (AFM) for investigating nanoparticle (NP) algal cell interaction with a subnanometer resolution. We designed a set of AFM experiments to characterize NP size, shape, and structure to visualize changes in the cell morphology induced by NPs and to characterize NP interaction with the extracellular polymeric substance (EPS). Samples for AFM imaging were prepared using the same protocol-drop deposition on mica and imaged in air. Here we address the interactions of Ag NPs with ubiquitous, lightly silicified marine diatoms Cylindrotheca fusiformis and Cylindrotheca closterium and their EPS. In natural seawater used throughout this study, the single Ag NPs adopted truncated tetrahedron morphology with particle heights of 10, 20, 30, and 40 nm. This size class Ag NPs penetrates the cell wall through the valve region built of silica NPs embedded in organic matrix. The Ag NPs cause a local damage inside the cell without disintegration of the cell wall. The EPS production has been shown to increase as a feedback response to Ag NP exposure and may contribute to detoxification mechanisms. Imaging EPS at high resolution revealed the incorporation of Ag NPs and their aggregates into the EPS-gel matrix, proving their detoxifying capacity.

Surface modified liposomes by mannosylated conjugates anchored via the adamantyl moiety in the lipid bilayer.

The aim of the present study was to encapsulate mannosylated 1-aminoadamantane and mannosylated adamantyltripeptides, namely [(2R)-N-(adamant-1-yl)-3-(α,ß-d-mannopyranosyloxy)-2-methylpropanamide and (2R)-N-[3-(α-d-mannopyranosyloxy)-2-methylpropanoyl]-d,l-(adamant-2-yl)glycyl-l-alanyl-d-isoglutamine] in liposomes. The characterization of liposomes, size and surface morphology was performed using dynamic light scattering (DLS) and atomic force microscopy (AFM). The results have revealed that the encapsulation of examined compounds changes the size and surface of liposomes. After the concanavalin A (ConA) was added to the liposome preparation, increase in liposome size and their aggregation has been observed. The enlargement of liposomes was ascribed to the specific binding of the ConA to the mannose present on the surface of the prepared liposomes. Thus, it has been shown that the adamantyl moiety from mannosylated 1-aminoadamantane and mannosylated adamantyltripeptides can be used as an anchor in the lipid bilayer for carbohydrate moiety exposed on the liposome surface.

QUANTITATIVE NANOMECHANICAL MAPPING OF MARINE DIATOM IN SEAWATER USING PEAK FORCE TAPPING ATOMIC FORCE MICROSCOPY(1).

It is generally accepted that a diatom cell wall is characterized by a siliceous skeleton covered by an organic envelope essentially composed of polysaccharides and proteins. Understanding of how the organic component is associated with the silica structure provides an important insight into the biomineralization process and patterning on the cellular level. Using a novel atomic force microscopy (AFM) imaging technique (Peak Force Tapping), we characterized nanomechanical properties (elasticity and deformation) of a weakly silicified marine diatom Cylindrotheca closterium (Ehrenb.) Reimann et J. C. Lewin (strain CCNA1). The nanomechanical properties were measured over the entire cell surface in seawater at a resolution that was not achieved previously. The fibulae were the stiffest (200 MPa) and the least deformable (only 1 nm). Girdle band region appeared as a series of parallel stripes characterized by two sets of values of Young's modulus and deformation: one for silica stripes (43.7 Mpa, 3.7 nm) and the other between the stripes (21.3 MPa, 13.4 nm). The valve region was complex with average values of Young's modulus (29.8 MPa) and deformation (10.2 nm) with high standard deviations. After acid treatment, we identified 15 nm sized silica spheres in the valve region connecting raphe with the girdle bands. The silica spheres were neither fused together nor forming a nanopattern. A cell wall model is proposed with individual silica nanoparticles incorporated in an organic matrix. Such organization of girdle band and valve regions enables the high flexibility needed for movement and adaptation to different environments while maintaining the integrity of the cell.

Polymer networks produced by marine diatoms in the northern Adriatic sea.

Using high resolution molecular technique of atomic force microscopy, we address the extracellular polymer production of Adriatic diatom Cylindrotheca closterium analyzed at the single cell level and the supramolecular organization of gel phase isolated from the Northern Adriatic macroaggregates. Our results revealed that extracellular polysaccharides freshly produced by marine diatoms can self-assemble directly to form gel network characteristics of the macroscopic gel phase in the natural aquatorium. Based on the experiments performed with isolated polysaccharide fractions of C. closterium and of macroaggregates gel phase, we demonstrated that the polysaccharide self-assembly into gel network can proceed independent of any bacterial mediation or interaction with inorganic particles.

Seawater at the nanoscale: marine gel imaged by atomic force microscopy.

The present study introduces atomic force microscopy (AFM) as a tool for characterization of marine gel network and marine biopolymers self-assembly, not accessible by other techniques. AFM imaging of marine gel samples collected in summers 2003 and 2004 in the northern Adriatic Sea provided insight into molecular organization of gel network and associations between polysaccharide fibrils in the network. Initial stages of biopolymers self-assembly were visualized by AFM in a phytoplankton bloom experiment performed in the same aquatorium. Based on AFM imaging and differential scanning calorimetry, the marine gel is characterized as a thermoreversible physical gel and the dominant mode of gelation as crosslinking of polysaccharide fibrils by hydrogen bonding which results in helical structures and their associations. Direct deposition of whole seawater on freshly cleaved mica followed by rinsing was the procedure that caused the least impact on the original structures of biopolymer assemblies in seawater.

AFM imaging of extracellular polymer release by marine diatom Cylindrotheca closterium (Ehrenberg) Reiman & J.C. Lewin.

Extracellular polysaccharide production by marine diatoms is a significant route by which photosynthetically produced organic carbon enters the trophic web and may influence the physical environment in the sea. This study highlights the capacity of atomic force microscopy (AFM) for investigating diatom extracellular polysaccharides with a subnanometer resolution. Here we address a ubiquitous marine diatom Cylindrotheca closterium, isolated from the northern Adriatic Sea, and its extracellular polymeric substance (EPS) at a single cell level. We applied a simple procedure for AFM imaging of diatom cells on mica under ambient conditions (in air) to achieve visualization of their EPS with molecular resolution. The EPS represents a web of polysaccharide fibrils with two types of cross-linking: fibrils association forming junction zones and fibril-globule interconnections with globules connecting two or more fibrils. The fibril heights were 0.4-2.6 nm while globules height was in the range of 3-12 nm. Polymer networks of native gel samples from the Northern Adriatic and the network formed by polysaccharides extracted from the C. closterium culture share the same features regarding the fibril heights, pore openings and the mode of fibril association, proving that the macroscopic gel phase in the Northern Adriatic can be formed directly by the self-assembly of diatom released polysaccharide fibrils.

A study of the surface topography and roughness of glazed and unglazed feldspathic ceramics.

The aim of this study was to obtain the 3-D qualitative and quantitative nanoscale data of the surface topography and surface roughness of glazed and unglazed feldspathic ceramics. Twelve samples composed of Ni-Cr alloy (Wiron 99, Bego Germany) and feldspathic ceramics (IPS Classic, Ivoclar-Vivadent, Schaan, Liechtenstein) were prepared, and divided into two groups, dependent of the surface final finishing; 6 unglazed and 6 glazed samples. The surface of the samples was recorded and analysed by atomic force microscopy (AFM, Veeco Instruments, Santa Barbara, CA, U.S.A.). According to the results of this study, unglazed ceramic surface is significantly rougher than the glazed one, showing significantly higher root mean square (RMS), mean roughness (Ra) and maximum height (Z range values) (p < 0.01), higher crystallites with sharper peaks and deeper pores. The roughness parameters of the unglazed samples were almost twice or even more higher than of the glazed samples. Exposed unglazed ceramic surfaces can therefore promote antagonistic tooth wear.

Biophysical scenario of giant gel formation in the northern Adriatic sea.

The macroscopic gel phase (mucilage) appears episodically in the northern Adriatic Sea covering tens of square kilometers of sea surface. Current views leave no doubt on phytoplankton production as a proximal source of polymers constituting the gel network, but the mechanism leading to its rapid production remains unknown. We introduced electrochemical sensing of marine microparticles and atomic force microscopy to image supramolecular organization of marine gel network. Our biophysical scenario of mucilage event features self-organization of biopolymers into microparticles ("marine vesicles") that under specific conditions transform to giant gel by a fast vesicle-to-gel transition.

Probing cell surface charge by scanning electrode potential.

A static mercury electrode was used for measurement of double-layer charge displacement signals caused by living plant cells of the unicellular marine alga Dunaliella tertiolecta. By scanning the electrode potential a point is reached where the charge density of a plant cell compensates the electrode charge density. The experimentally determined values of surface charges for unicellular marine alga Dunaliella tertiolecta cells are -0.63 and -0.75 nuC/cm(2) in 0.1 M NaCl and 1 M NaCl solutions, respectively.