Progress in biocatalysis with immobilized viable whole cells: systems development, reaction engineering and applications.

Viable microbial cells are important biocatalysts in the production of fine chemicals and biofuels, in environmental applications and also in emerging applications such as biosensors or medicine. Their increasing significance is driven mainly by the intensive development of high performance recombinant strains supplying multienzyme cascade reaction pathways, and by advances in preservation of the native state and stability of whole-cell biocatalysts throughout their application. In many cases, the stability and performance of whole-cell biocatalysts can be highly improved by controlled immobilization techniques. This review summarizes the current progress in the development of immobilized whole-cell biocatalysts, the immobilization methods as well as in the bioreaction engineering aspects and economical aspects of their biocatalytic applications.

Optical biosensors.

Optical biosensors represent the most common type of biosensor. Here we provide a brief classification, a description of underlying principles of operation and their bioanalytical applications. The main focus is placed on the most widely used optical biosensors which are surface plasmon resonance (SPR)-based biosensors including SPR imaging and localized SPR. In addition, other optical biosensor systems are described, such as evanescent wave fluorescence and bioluminescent optical fibre biosensors, as well as interferometric, ellipsometric and reflectometric interference spectroscopy and surface-enhanced Raman scattering biosensors. The optical biosensors discussed here allow the sensitive and selective detection of a wide range of analytes including viruses, toxins, drugs, antibodies, tumour biomarkers and tumour cells.

Native MS Analysis of Bacteriorhodopsin and an Empty Nanodisc by Orthogonal Acceleration Time-of-Flight, Orbitrap and Ion Cyclotron Resonance.

Over the past two decades, orthogonal acceleration time-of-flight has been the de facto analyzer for solution and membrane-soluble protein native mass spectrometry (MS) studies; this however is gradually changing. Three MS instruments are compared, the Q-ToF, Orbitrap, and the FT-ICR, to analyze, under native instrument and buffer conditions, the seven-transmembrane helical protein bacteriorhodopsin-octylglucoside micelle and the empty nanodisc (MSP1D1-Nd) using both MS and tandem-MS modes of operation. Bacteriorhodopsin can be released from the octylglucoside-micelle efficiently on all three instruments (MS-mode), producing a narrow charge state distribution (z = 8+ to 10+) by either increasing the source lens or collision cell (or HCD) voltages. A lower center-of-mass collision energy (0.20-0.41 eV) is required for optimal bacteriorhodopsin liberation on the FT-ICR, in comparison to the Q-ToF and Orbitrap instruments (0.29-2.47 eV). The empty MSP1D1-Nd can be measured with relative ease on all three instruments, resulting in a highly complex spectrum of overlapping, polydisperse charge states. There is a measurable difference in MSP1D1-Nd charge state distribution (z = 15+ to 26+), average molecular weight (141.7 to 169.6 kDa), and phospholipid incorporation number (143 to 184) under low activation conditions. Utilizing tandem-MS, bacteriorhodopsin can be effectively liberated from the octylglucoside-micelle by collisional (Q-ToF and FT-ICR) or continuous IRMPD activation (FT-ICR). MSP1D1-Nd spectral complexity can also be significantly reduced by tandem-MS (Q-ToF and FT-ICR) followed by mild collisional or continuous IRMPD activation, resulting in a spectrum in which the charge state and phospholipid incorporation levels can easily be determined.

Glycan and lectin microarrays for glycomics and medicinal applications.

Three different array formats to study a challenging field of glycomics are presented here, based on the use of a panel of immobilized glycan or lectins, and on in silico computational approach. Glycan and lectin arrays are routinely used in combination with other analytical tools to decipher a complex nature of glycan-mediated recognition responsible for signal transduction of a broad range of biological processes. Fundamental aspects of the glycan and lectin array technology are discussed, with the focus on the choice and availability of the biorecognition elements, fabrication protocols, and detection platforms involved. Moreover, practical applications of both technologies especially in the field of clinical diagnostics are provided. The future potential of a complementary in silico array technology to reveal details of the protein-glycan-binding profiles is discussed here.

Precision of protein aggregation measurements by sedimentation velocity analytical ultracentrifugation in biopharmaceutical applications.

Sedimentation velocity analytical ultracentrifugation (SV-AUC) is routinely applied in biopharmaceutical development to measure levels of protein aggregation in protein products. SV-AUC is free from many limitations intrinsic to size exclusion chromatography (SEC) such as mobile phase and column interaction effects on protein self-association. Despite these clear advantages, SV-AUC exhibits lower precision measurements than corresponding measurements by SEC. The precision of SV-AUC is influenced by numerous factors, including sample characteristics, cell alignment, centerpiece quality, and data analysis approaches. In this study, we evaluate the precision of SV-AUC in its current practice utilizing a multilaboratory, multiproduct intermediate precision study. We then explore experimental approaches to improve SV-AUC measurement precision, with emphasis on utilization of high quality centerpieces.

Response of a concentrated monoclonal antibody formulation to high shear.

There is concern that shear could cause protein unfolding or aggregation during commercial biopharmaceutical production. In this work we exposed two concentrated immunoglobulin-G1 (IgG1) monoclonal antibody (mAb, at >100 mg/mL) formulations to shear rates between 20,000 and 250,000 s(-1) for between 5 min and 30 ms using a parallel-plate and capillary rheometer, respectively. The maximum shear and force exposures were far in excess of those expected during normal processing operations (20,000 s(-1) and 0.06 pN, respectively). We used multiple characterization techniques to determine if there was any detectable aggregation. We found that shear alone did not cause aggregation, but that prolonged exposure to shear in the stainless steel parallel-plate rheometer caused a very minor reversible aggregation (<0.3%). Additionally, shear did not alter aggregate populations in formulations containing 17% preformed heat-induced aggregates of a mAb. We calculate that the forces applied to a protein by production shear exposures (<0.06 pN) are small when compared with the 140 pN force expected at the air-water interface or the 20-150 pN forces required to mechanically unfold proteins described in the atomic force microscope (AFM) literature. Therefore, we suggest that in many cases, air-bubble entrainment, adsorption to solid surfaces (with possible shear synergy), contamination by particulates, or pump cavitation stresses could be much more important causes of aggregation than shear exposure during production.

Membrane-bound dehydrogenases from Gluconobacter sp.: interfacial electrochemistry and direct bioelectrocatalysis.

Although membrane-bound dehydrogenases isolated from Gluconobacter sp. (mainly PQQ-dependent alcohol and fructose dehydrogenase) have been used for preparing diverse forms of bioelectronic interfaces for almost 2 decades, it is not an easy task to interpret an electrochemical behaviour correctly. Recent discoveries regarding redox properties of membrane-bound dehydrogenases along with extensive investigations of direct electron transfer (DET) or direct bioelectrocatalysis with these enzymes are summarized in this review. The main aim of this review is to draw general conclusions about possible electronic coupling paths of these enzymes on various interfaces via direct electron transfer or direct bioelectrocatalysis. A short overview of the metabolism and respiration chain in Gluconobacter relevant to interfacial electrochemistry is given. Biosensor devices based on DET or direct bioelectrocatalysis using membrane-bound dehydrogenases from Gluconobacter sp. are described briefly with the emphasis given on practical applications of preparing enzymatic biofuel cells. Moreover, interfacial electrochemistry of Gluconobacter oxydans related to the construction of microbial biofuel cells is also discussed.

Multiscale requirements for bioencapsulation in medicine and biotechnology.

Bioencapsulation involves the envelopment of tissues or biological active substances in semipermeable membranes. Bioencapsulation has been shown to be efficacious in mimicking the cell's natural environment and thereby improves the efficiency of production of different metabolites and therapeutic agents. The field of application is broad. It is being applied in bioindustry and biomedicine. It is clinically applied for the treatment of a wide variety of endocrine diseases. During the past decades many procedures to fabricate capsules have been described. Unfortunately, most of these procedures lack an adequate documentation of the characterization of the biocapsules. As a result many procedures show an extreme lab-to-lab variation and many results cannot be adequately reproduced. The characterization of capsules can no longer be neglected, especially since new clinical trials with bioencapsulated therapeutic cells have been initiated and the industrial application of bioencapsulation is growing. In the present review we discuss novel Approached to produce and characterize biocapsules in view of clinical and industrial application. A dominant factor in bioencapsulation is selection and characterization of suitable polymers. We present the adequacy of using high-resolution NMR for characterizing polymers. These polymers are applied for producing semipermeable membranes. We present the pitfalls of the currently applied methods and provide recommendations for standardization to avoid lab-to-lab variations. Also, we compare and present methodologies to produce biocompatible biocapsules for specific fields of applications and we demonstrate how physico-chemical technologies such as FT-IR, XPS, and TOF-SIMS contribute to reproducibility and standardization of the bioencapsulation process. During recent years it has become more and more clear that bioencapsulation requires a multidisciplinary approach in which biomedical, physical, and chemical technologies are combined. For adequate reproducibility and for understanding variations in outcome of biocapsules it is advisable if not mandatory to include the characterization processes presented in this review in future studies.

Lectinomics II. A highway to biomedical/clinical diagnostics.

The review assesses current status and attempts to forecast trends in the development of lectin biorecognition technology. The progressive trend is characterized scientometrically and reflects the current transient situation, when standard low-throughput lectin-based techniques are being replaced by a novel microarray-based techniques offering high-throughput of detection. The technology is still in its infancy (validation phase), but already shows promise as an efficient tool to decipher the enormous complexity of the glycocode that influences physiological status of the cell. Further enhancement in robustness and flexibility of lectin microarrays is predicted by using recombinant and artificial lectins that will render production of lectin microarrays cost-effective and more affordable. Mass spectrometry is expected to play an important role to characterize the binding profile of new lectins. Differences in glycan recognition by lectins and anti-carbohydrate antibodies are given on a molecular basis, and strong and weak points of both biorecognition molecules in diagnosis are briefly discussed.

Bayesian analysis of heterogeneity in the distribution of binding properties of immobilized surface sites.

Once a homogeneous ensemble of a protein ligand is taken from solution and immobilized to a surface, for many reasons the resulting ensemble of surface binding sites to soluble analytes may be heterogeneous. For example, this can be due to the intrinsic surface roughness causing variations in the local microenvironment, nonuniform density distribution of polymeric linkers, or nonuniform chemical attachment producing different protein orientations and conformations. We previously described a computational method for determining the distribution of affinity and rate constants of surface sites from analysis of experimental surface binding data. It fully exploits the high signal/noise ratio and reproducibility provided by optical biosensor technology, such as surface plasmon resonance. Since the computational analysis is ill conditioned, the previous approach used a regularization strategy assuming a priori all binding parameters to be equally likely, resulting in the broadest possible parameter distribution consistent with the experimental data. We now extended this method in a Bayesian approach to incorporate the opposite assumption, i.e., that the surface sites a priori are expected to be uniform (as one would expect in free solution). This results in a distribution of binding parameters as close to monodispersity as possible given the experimental data. Using several model protein systems immobilized on a carboxymethyl dextran surface and probed with surface plasmon resonance, we show microheterogeneity of the surface sites in addition to broad populations of significantly altered affinity. The distributions obtained are highly reproducible. Immobilization conditions and the total surface density of immobilized sites can have a substantial impact on the functional distribution of the binding sites.

Probing the functional heterogeneity of surface binding sites by analysis of experimental binding traces and the effect of mass transport limitation.

Many techniques rely on the binding activity of surface-immobilized proteins, including antibody-based affinity biosensors for the detection of analytes, immunoassays, protein arrays, and surface plasmon resonance biosensors for the study of thermodynamic and kinetic aspects of protein interactions. To study the functional homogeneity of the surface sites and to characterize their binding properties, we have recently proposed a computational tool to determine the distribution of affinity and kinetic rate constants from surface binding progress curves. It is based on modeling the experimentally measured binding signal as a superposition of signals from binding to sites spanning a range of rate and equilibrium constants, with regularization providing the most parsimonious distribution consistent with the data. In the present work, we have expanded the scope of this approach to include a compartment-like transport step, which can describe competitive binding to different surface sites in a zone of depleted analyte close to the sensor surface. This approach addresses a major difficulty in the analysis of surface binding where both transport limitation as well as unknown surface site heterogeneity may be present. In addition to the kinetic binding parameters of the ensemble of surface sites, it can provide estimates for effective transport rate constants. Using antibody-antigen interactions as experimental model systems, we studied the effects of the immobilization matrix and of the analyte flow-rate on the effective transport rate constant. Both were experimentally observed to influence mass transport. The approximate description of mass transport by a compartment model becomes critical when applied to strongly transport-controlled data, and we examined the limitations of this model. In the presence of only moderate mass transport limitation the compartment model provides a good description, but this approximation breaks down for strongly transport-limited surface binding. In the latter regime, we report experimental evidence for the formation of gradients within the sensing volume of the evanescent field biosensor used.

Gluconobacter in biosensors: applications of whole cells and enzymes isolated from Gluconobacter and Acetobacter to biosensor construction.

Bacteria belonging to the genus Acetobacter and Gluconobacter, and enzymes isolated from them, have been extensively used for biosensor construction in the last decade. Bacteria used as a biocatalyst are easy to prepare and use in amperometric biosensors. They contain multiple enzyme activities otherwise not available commercially. The range of compounds analyzable by Gluconobacter biosensors includes: mono- and poly-alcohols, multiple aldoses and ketoses, several disaccharides, triacylglycerols, and complex parameters like utilizable saccharides or biological O2 demand. Here, the recent trends in Gluconobacter biosensors and current practical applications are summarized.

Efficient neutralization of anthrax toxin by chimpanzee monoclonal antibodies against protective antigen.

Four single-chain variable fragments (scFvs) against protective antigen (PA) and 2 scFvs against lethal factor (LF) of anthrax were isolated from a phage display library generated from immunized chimpanzees. Only 2 scFvs recognizing PA (W1 and W2) neutralized the cytotoxicity of lethal toxin in a macrophage lysis assay. Full-length immunoglobulin G (IgG) of W1 and W2 efficiently protected rats from anthrax toxin challenge. The epitope recognized by W1 and W2 was conformational and was formed by C-terminal amino acids 614-735 of PA. W1 and W2 each bound to PA with an equilibrium dissociation constant of 4x10-11 mol/L to 5x10(-11) mol/L, which is an affinity that is 20-100-fold higher than that for the interaction of the receptor and PA. W1 and W2 inhibited the binding of PA to the receptor, suggesting that this was the mechanism of protection. These data suggest that W1 and W2 chimpanzee monoclonal antibodies may serve as PA entry inhibitors for use in the emergency prophylaxis against and treatment of anthrax.

Chimpanzee/human mAbs to vaccinia virus B5 protein neutralize vaccinia and smallpox viruses and protect mice against vaccinia virus.

Chimpanzee Fabs against the B5 envelope glycoprotein of vaccinia virus were isolated and converted into complete mAbs with human gamma 1 heavy chain constant regions. The two mAbs (8AH8AL and 8AH7AL) displayed high binding affinities to B5 (Kd of 0.2 and 0.7 nM). The mAb 8AH8AL inhibited the spread of vaccinia virus as well as variola virus (the causative agent of smallpox) in vitro, protected mice from subsequent intranasal challenge with virulent vaccinia virus, protected mice when administered 2 days after challenge, and provided significantly greater protection than that afforded by a previously isolated rat anti-B5 mAb (19C2) or by vaccinia immune globulin. The mAb bound to a conformational epitope between amino acids 20 and 130 of B5. These chimpanzee/human anti-B5 mAbs may be useful in the prevention and treatment of vaccinia virus-induced complications of vaccination against smallpox and may also be effective in the immunoprophylaxis and immunotherapy of smallpox.

Exposure of acidic residues as a danger signal for recognition of fibrinogen and other macromolecules by integrin alphaXbeta2.

The structural integrity of tissue proteins is damaged in processes ranging from remodeling of the extracellular matrix to destruction by microbial pathogens. Leukocytes play a prominent role in tissue surveillance and repair. However, it remains enigmatic what features of structurally decayed proteins prompt recognition by leukocyte cell-surface receptors. Here, we report that adhesion of human neutrophil granulocytes to fibrinogen is greatly increased by plasmin digestion in a mode where alphaXbeta2 dominates the integrin-dependent binding. The bacterial protease subtilisin also enhances binding by alphaXbeta2. The alphaX ligand binding domain has an unusually high affinity for carboxyl groups, with KD at approximately 100 microM. Our findings implicate enhanced accessibility of negatively charged residues in structurally decayed proteins as a pattern recognition motif for alphaXbeta2 integrin. Comparisons among integrins show relevance of these findings to the large number of ligands recognized by alphaMbeta2 and alphaXbeta2 but not alphaLbeta2. The observations suggest that the pericellular proteolysis at the leading edge of neutrophils not only facilitates passage through the extracellular matrix but also manufactures binding sites for alphaXbeta2.

Mannan-penicillin G acylase neoglycoproteins and their potential applications in biotechnology.

Mannan-penicillin G acylase neoglycoproteins were prepared by the conjugation of Saccharomyces cerevisiae mannan with enzyme penicillin G acylase using the reductive amination method. Eight neoglycoproteins preparations were obtained after gel chromatography. The preparations contained from 42 to 67% (w/w) saccharides and their molar masses varied from 283 to over 1000 kDa. Significant biospecific interaction of separated fractions with the lectin concanavalin A was evaluated by the precipitation and sorption method (equilibrium constants) and further characterized using surface plasmon resonance to determine kinetic association and dissociation constants. K (D) was determined over the range 10(-7) M. High-molar-mass preparations appeared to be more suitable for preparation of stable and active complexes with concanavalin A for prospective use as a penicillin G acylase biocatalyst in enzyme reactors. The enzyme stability of such complexes was significantly increased compared with the original neoglycoprotein. Lower-molar-mass preparations were more suitable for applications such as biocatalysts in bioanalytical devices.

Combined affinity and rate constant distributions of ligand populations from experimental surface binding kinetics and equilibria.

The present article considers the influence of heterogeneity in a mobile analyte or in an immobilized ligand population on the surface binding kinetics and equilibrium isotherms. We describe strategies for solving the inverse problem of calculating two-dimensional distributions of rate and affinity constants from experimental data on surface binding kinetics, such as obtained from optical biosensors. Although the characterization of a heterogeneous population of analytes binding to uniform surface sites may be possible under suitable experimental conditions, computational difficulties currently limit this approach. In contrast, the case of uniform analytes binding to heterogeneous populations of surface sites is computationally feasible, and can be combined with Tikhonov-Phillips and maximum entropy regularization techniques that provide the simplest distribution that is consistent with the data. The properties of this ligand distribution analysis are explored with several experimental and simulated data sets. The resulting two-dimensional rate and affinity constant distributions can describe well experimental kinetic traces measured with optical biosensors. The use of kinetic surface binding data can give significantly higher resolution than affinity distributions from the binding isotherms alone. The shape and the level of detail of the calculated distributions depend on the experimental conditions, such as contact times and the concentration range of the analyte. Despite the flexibility introduced by considering surface site distributions, the impostor application of this model to surface binding data from transport limited binding processes or from analyte distributions can be identified by large residuals, if a sufficient range of analyte concentrations and contact times are used. The distribution analysis can provide a rational interpretation of complex experimental surface binding kinetics, and provides an analytical tool for probing the homogeneity of the populations of immobilized protein.

Affinity analysis of lectin interaction with immobilized C- and O- gylcosides studied by surface plasmon resonance assay.

A biosensor based on the surface plasmon resonance (SPR) principle was used for kinetic analysis of lectin interactions with different immobilized saccharide structures. A novel affinity ligands beta-D-glycopyranosylmethylamines derived from common D-aldohexoses linked to the carboxymethyl dextran layer of the SPR sensor surface served for interactions with a wide range of lectins. The method of preparation and use of the beta-D-mannopyranosyl glycosylated sensor surface was described. The results of affinity analysis of lectin-ligand interactions were evaluated and compared with data obtained from measurements using commercially available p-aminophenyl alpha-D-glycopyranosides. Possible applications and advantages of C- and O-glycosylated SPR biosensors are discussed.

Gold-coated capillary based 2,4-dichlorophenoxyacetic acid chemi-luminescent assays: possibilities towards multianalysis.

The application of gold-coated glass capillaries for the design of a sensitive chemiluminescent immunoassay for 2,4-dichlorophenoxyacetic acid (2,4-D) is reported. The gold coating on the glass capillaries has been partially characterized and its effect on enhancing the signal intensity has been measured. A simple photo-multiplier tube-based photon detector is used for this purpose. At least three times improvement in the signal intensity is observed compared to uncoated glass capillaries, with a consequent improvement in the sensitivity of detection. Using such gold-coated glass capillaries, 2,4-D in the range 10(-9) to 10(-13) mol/l is detectable at a precision of +/-15% (CV%) and a limit of detection of 10(-15) mol/l is achievable. The possibility of using such gold-coated capillaries with a portable multianalytical set-up for field studies is also demonstrated.