Selection of maize hybrids based on genotype × yield × trait (GYT) in different environments / Seleção de híbridos de milho com base no genótipo × rendimento × característica (GYT) em diferentes ambientes

This study aimed to identify the best genotypes using the genotype × yield × trait (GYT) method. To investigate the relationships was performed between yield × traits in four regions of Karaj, Birjand, Shiraz and Arak in two cropping years in a randomized complete block design (RCBD) with three replications. The average grain yield in four regions and two years of the experiment was calculated as 5966 kg/ha, and GYT was obtained based on the multiplication of grain yield with different traits. Comparing the average effect of genotype × year in different environments showed that KSC703 and KSC707 hybrids are among the most productive hybrids among the studied genotypes in grain yield. By examining the correlation coefficients between yield × traits in the tested areas, Y × TWG with Y × GW, Y × NRE, Y × NGR and Y × EL, Y × ED with Y × NGR, Y × NRE with Y × GW and the combination of Y × GW with Y × GL had a positive and significant correlation in all regions. The correlation diagrams were drawn on the evaluated areas' data and showed the correlation of most compounds except Y × GT with each other. Based on the analysis of the main components, the first three components explained the greatest diversity in the population. They were named the component ear grain profile, grain thickness component and plant height profile component.

Este estudo teve como objetivo identificar os melhores genótipos usando o método "genótipo × produção × característica (GYT)". Uma análise foi realizada para investigar as relações entre "rendimento × características", em quatro regiões de Karaj, Birjand, Shiraz e Arak durante dois anos de cultivo, em um delineamento de blocos completos ao acaso (RCBD) com três repetições. O rendimento médio de grãos em quatro regiões e dois anos de experimento foi calculado em 5966 kg/ha, e o GYT foi obtido a partir da multiplicação do rendimento de grãos com diferentes caracteres. A comparação do efeito médio de "genótipo × ano" em diferentes ambientes mostrou que os híbridos KSC703 e KSC707 estão entre os híbridos mais produtivos entre os genótipos estudados na produtividade de grãos. Examinando os coeficientes de correlação entre rendimento × características nas áreas testadas, Y × TWG com Y × GW, Y × NRE, Y × NGR e Y × EL, Y × ED com Y × NGR, Y × NRE com Y × GW e a combinação de Y × GW com Y × GL apresentaram correlação positiva e significativa em todas as regiões. Os diagramas de correlação foram desenhados nos dados das áreas avaliadas e mostraram a correlação da maioria dos compostos exceto Y × GT entre si. Com base na análise dos componentes principais, os três primeiros componentes explicaram a maior diversidade da população. Eles foram denominados de "componente perfil de grão da espiga", "componente de espessura de grão" e "componente de perfil de altura da planta".

Stability yield indices on different sweet corn hybrids based on AMMI analysis / Índices de estabilidade de rendimento em diferentes híbridos de milho-doce com base na análise AMMI

Currently, sweet corn is considered an important crop due to its high sugar content and low starch content. Important sugars in sweet corn include sucrose, fructose, glucose, and maltose. The purpose of the present study was to use the yield indices of the eight examined sweet corn hybrids and the correlation of the yield indices together. Concentration is important for consumers in terms of yield indices. The research site was located at the Látókép Experimental Station of the University of Debrecen. The small plot experiment had a strip plot design with four replications. The previous crop was sweet corn; the plant density was 64 thousand/ha. The obtained result indicates that Biplot AMMI based on IPCA1 showed that the DB, NO, GS, and GB hybrids had stability and high performance in terms of yield indices. At the same time, fructose and glucose had stable parameters for the hybrids involved in the study. IPCA1 AMMI biplot showed that the ME hybrid had stability and high performance in terms of iron and zinc as well. IPCA2 AMMI biplot showed that DE, GB, and GS hybrids had stability and the highest performance on yield parameters in the scope of the research. Fructose, glucose, and sucrose had stable parameters on hybrids based on IPCA2. The DB and SE hybrids had desirable performance in Lutein and Zeaxanthin based on the biplot. The DE hybrid had a maximum performance on iron and zinc parameters.

Atualmente, o milho-doce é considerado uma cultura importante devido ao alto teor de açúcar e baixo teor de amido. Açúcares importantes no milho-doce incluem sacarose, frutose, glicose e maltose. O objetivo do presente estudo foi utilizar os índices de rendimento dos 8 híbridos de milho-doce examinados e a correlação dos índices de rendimento juntos. A concentração é importante para os consumidores com relação aos índices de rendimento. O local da pesquisa foi localizado na Estação Experimental Látókép da Universidade de Debrecen, Hungria. O experimento realizado em pequenas parcelas teve um desenho de parcela de tiras com quatro repetições. A safra anterior era de milho-doce; a densidade de plantas foi de 64 mil/ha. O resultado obtido indica que o Biplot AMMI baseado no IPCA1 mostrou que os híbridos DB, NO, GS e GB apresentaram estabilidade e alto desempenho em termos de índices de produtividade. Ao mesmo tempo, frutose e glicose apresentaram parâmetros estáveis para os híbridos envolvidos no estudo. O biplot IPCA1 AMMI mostrou que o híbrido ME apresentou estabilidade e alto desempenho também quanto ao ferro e zinco. Já o biplot IPCA2 AMMI mostrou que os híbridos DE, GB e GS tiveram estabilidade e o melhor desempenho nos parâmetros de rendimento no escopo da pesquisa. Frutose, glicose e sacarose tiveram parâmetros estáveis em híbridos baseados em IPCA2. Os híbridos DB e SE tiveram desempenho desejável em luteína e zeaxantina com base no biplot. O híbrido DE teve desempenho máximo nos parâmetros de ferro e zinco.

Selection of maize hybrids based on genotype × yield × trait (GYT) in different environments.

This study aimed to identify the best genotypes using the genotype × yield × trait (GYT) method. To investigate the relationships was performed between yield × traits in four regions of Karaj, Birjand, Shiraz and Arak in two cropping years in a randomized complete block design (RCBD) with three replications. The average grain yield in four regions and two years of the experiment was calculated as 5966 kg/ha, and GYT was obtained based on the multiplication of grain yield with different traits. Comparing the average effect of genotype × year in different environments showed that KSC703 and KSC707 hybrids are among the most productive hybrids among the studied genotypes in grain yield. By examining the correlation coefficients between yield × traits in the tested areas, Y × TWG with Y × GW, Y × NRE, Y × NGR and Y × EL, Y × ED with Y × NGR, Y × NRE with Y × GW and the combination of Y × GW with Y × GL had a positive and significant correlation in all regions. The correlation diagrams were drawn on the evaluated areas' data and showed the correlation of most compounds except Y × GT with each other. Based on the analysis of the main components, the first three components explained the greatest diversity in the population. They were named the component ear grain profile, grain thickness component and plant height profile component.

Stability yield indices on different sweet corn hybrids based on AMMI analysis.

Currently, sweet corn is considered an important crop due to its high sugar content and low starch content. Important sugars in sweet corn include sucrose, fructose, glucose, and maltose. The purpose of the present study was to use the yield indices of the eight examined sweet corn hybrids and the correlation of the yield indices together. Concentration is important for consumers in terms of yield indices. The research site was located at the Látókép Experimental Station of the University of Debrecen. The small plot experiment had a strip plot design with four replications. The previous crop was sweet corn; the plant density was 64 thousand/ha. The obtained result indicates that Biplot AMMI based on IPCA1 showed that the DB, NO, GS, and GB hybrids had stability and high performance in terms of yield indices. At the same time, fructose and glucose had stable parameters for the hybrids involved in the study. IPCA1 AMMI biplot showed that the ME hybrid had stability and high performance in terms of iron and zinc as well. IPCA2 AMMI biplot showed that DE, GB, and GS hybrids had stability and the highest performance on yield parameters in the scope of the research. Fructose, glucose, and sucrose had stable parameters on hybrids based on IPCA2. The DB and SE hybrids had desirable performance in Lutein and Zeaxanthin based on the biplot. The DE hybrid had a maximum performance on iron and zinc parameters.

Distinct prevalence of antibodies to the E2 protein of GB virus C/hepatitis G virus in different parts of the world.

Since the identification of the new human virus, GB virus C (GBV-C)/hepatitis G-virus (HGV), in 1995/1996, reverse transcription polymerase chain reaction remained the sole available diagnostic tool for GBV-C/HGV infection. Recently, a serologic test based on the detection of antibodies to the putative envelope protein 2 (anti-E2) has been introduced. We used this assay for a seroepidemiological survey including 3,314 healthy individuals from different parts of the world, 123 patients from Germany who were suspected to have an increased risk of acquiring GBV-C/HGV infection, 128 multiple organ donors, and 90 GBV-C/HGV RNA positive persons. In European countries, anti-E2 seropositivity ranged from 10.9% (Germany) to 15.3% (Austria). In South Africa (20.3%) and Brazil (19.5%), even higher anti-E2 prevalence rates were recorded. In Asian countries like Bhutan (3.9%), Malaysia (6.3%), and the Philippines (2.7%), anti-E2 positivity was significantly lower. GBV-C/HGV anti-E2 prevalence in potential "risk groups," i.e., patients on hemodialysis and renal transplant recipients, did not vary significantly from anti-E2 seroprevalence in German blood donors. Anti-E2 and GBV-C/HGV RNA were found to be mutually exclusive, confirming the notion that anti-E2 has to be considered as a marker of past infection.

Structure-activity correlations of melanotropin peptides in model lipids by tryptophan fluorescence studies.

Steady-state and time-resolved fluorescence spectroscopy were employed in the study of the structure and interactions of alpha-MSH (alpha-melanocyte-stimulating hormone) and its analogs, [Nle4,D-Phe7]-alpha-MSH (MSH-I) and Ac-[Nle4,Asp5,D-Phe7,Lys10]-alpha-MSH(4-10)-NH2 (MSH-II). In aqueous buffer, the fluorescence parameters of the single tryptophan of alpha-MSH and MSH-I were similar and did not allow any distinction between these molecules. On the other hand, the tryptophan fluorescence of MSH-II was notably different, reflecting its cyclic lactam turn structure. In the presence of acidic lipid vesicles, the fluorescence properties of the peptides were different, indicating structural changes on incorporation of the peptide into the liquid-crystalline phase of the lipid. No evidence of interaction was observed in the presence of the neutral lipid dimyristoylphosphatidylcholine (DMPC). The association constants for lipid-peptide interactions were compared for binding isotherms which either neglected or accounted for electrostatic effects through Gouy-Chapman potential functions. The relative order of association constants in either treatment was MSH-II > MSH-I > alpha-MSH. These results parallel the reported biological activities that show increased potencies and prolongation of response for the analogs, MSH-II and MSH-I, as compared to the native hormone, alpha-MSH. Time-resolved fluorescence results showed that the fluorescence decay of melanotropins is best described by triple-exponential kinetics. In the lipid-peptide complex, there was a change in the relative concentrations of the components, with the intermediate-lifetime component predominating compared to those in solution.(ABSTRACT TRUNCATED AT 250 WORDS)

Optical absorption and fluorescence spectroscopy studies of ground state melanin-cationic porphyrins complexes.

Optical absorption and fluorescence spectroscopies were employed in the study of the interaction between synthetic L-dopa (dihydroxyphenylalanine) melanin and the cationic porphyrins tetrakis(4-N-methylpyridyl) porphyrin (TMPyP), tetrakis(4-N-benzylpyridyl)porphyrin (TBzPyP), zinc tetrakis(4-N-methylpyridyl)porphyrin (ZnTMPyP) and zinc tetrakis (4-N-benzylpyridyl)porphyrin (ZnTBzPyP). Optical absorption and fluorescence properties of the porphyrins were dependent on the symmetry of the central ring. No evidence was found for dimerization of the porphyrins in phosphate buffer, pH 7, in the concentration range between 4 x 10(-8) to 5 x 10(-5) M. Addition of L-dopa melanin red shifted the optical absorption spectra of porphyrins, concomitant to broadening and reduction in intensity of the bands. L-Dopa melanin also strongly quenched the fluorescence of the porphyrins. Time resolution of the fluorescence decay of porphyrins showed at least two lifetimes that were only slightly modified in the presence of melanin. The interaction between melanin and porphyrin resulted in the formation of non-fluorescent ground state complexes. It was found that there are two different classes of binding sites in melanin for complexation with cationic porphyrins and the values of dissociation constants are of the order of 10(-8) M. These values and the number of binding sites are dependent on the nature of the porphyrins. It was shown that the binding has electrostatic origin, but it is also affected by metal coordination and hydrophobic interaction.